Topic: [ANN] TagCoin pool tag.cryptominer.net - page 5. (Read 26455 times)
Is there anything we need to do on our end? Now that were on the block chain, will this eliminate the god awful amount of orphans we've been getting? I seriously lost 14 out of my 24 coins mined.
Pool updated to latest version 1.0.3
Tested transactions:
* 1 TAG sent to my wallet from pool server - SUCCESS
* 1 TAG sent to Cryptsy from my wallet - SUCCESS
So pool seems to be on the correct chain, however we also had lots of orphans in the last days.
http://tag.cryptominer.net/
Tested transactions:
* 1 TAG sent to my wallet from pool server - SUCCESS
* 1 TAG sent to Cryptsy from my wallet - SUCCESS
So pool seems to be on the correct chain, however we also had lots of orphans in the last days.
http://tag.cryptominer.net/
Man I guess so. I'm used to litecoin crediting after 20 confirms. It seems myself and others are still receiving a high number of orphans. Are we still plagued with a forking issue?
Yeah. TAG isnt the most stable coins in the last weeks.
Man I guess so. I'm used to litecoin crediting after 20 confirms. It seems myself and others are still receiving a high number of orphans. Are we still plagued with a forking issue?
I currently have over 3,000 unpaid shares during my 24/7 mining run. Do I have to completely stop mining for those shares to even make it to the unconfirmed category? I'm a little concerned.
As blocks mature you get your reward confirmed. TAG needs 200 confirmations until blocks are confirmed on the network. So it takes a while.
Regards
Any ideas? lmk.
Bump? I would appreciate if OP can post tutorials on how to configure cgminer more easily; yes, I read the manual and they didn't say anything about alternating CPU/GPU parameters.
So.. *BUMP*. Thanks.
After 4 hours worth of research:
1) cgminer is removing all GPU coding. I don't know why, ask OP.
2) I am using Bitminer and it's working flawlessly - 90 MH/s. I am not sure how much I will earn in one month. I guess $68? Maybe it's not worth the electricity bill.
Hello,
Newest cgminer doesnt have GPU support anymore. Use older versions. I use 3.0 under Windows 7, it works flawlessly with R-280x cards.
Here are my settings:
Code:
{
"pools" : [
{
"url" : "url",
"user" : "worker",
"pass" : "pass"
}
],
"intensity" : "20",
"vectors" : "1",
"worksize" : "256",
"kernel" : "scrypt",
"lookup-gap" : "0",
"thread-concurrency" : "24576",
"shaders" : "0",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"gpu-engine" : "1050",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"scrypt" : true,
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}
"pools" : [
{
"url" : "url",
"user" : "worker",
"pass" : "pass"
}
],
"intensity" : "20",
"vectors" : "1",
"worksize" : "256",
"kernel" : "scrypt",
"lookup-gap" : "0",
"thread-concurrency" : "24576",
"shaders" : "0",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"gpu-engine" : "1050",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"scrypt" : true,
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}
Thanks.
Any ideas? lmk.
Bump? I would appreciate if OP can post tutorials on how to configure cgminer more easily; yes, I read the manual and they didn't say anything about alternating CPU/GPU parameters.
So.. *BUMP*. Thanks.
After 4 hours worth of research:
1) cgminer is removing all GPU coding. I don't know why, ask OP.
2) I am using Bitminer and it's working flawlessly - 90 MH/s. I am not sure how much I will earn in one month. I guess $68? Maybe it's not worth the electricity bill.
I am going to assume cgminer is not compatible with Windows 8.1
Any ideas? lmk.
Bump? I would appreciate if OP can post tutorials on how to configure cgminer more easily; yes, I read the manual and they didn't say anything about alternating CPU/GPU parameters.
So.. *BUMP*. Thanks.
Here's the config file:
{
"pools" : [
{
"url" : "stratum+tcp://tag.cryptominer.net:3359"
"user" : "REDACTED",
"pass" : "REDACTED"
}
],
"intensity" : "19",
"vectors" : "1",
"worksize" : "256",
"kernel" : "scrypt",
"lookup-gap" : "0",
"thread-concurrency" : "21376",
"shaders" : "0",
"gpu-engine" : "1058",
"gpu-fan" : "85",
"gpu-memclock" : "6000",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.000",
"temp-overheat" : "85",
"temp-target" : "75",
"api-listen" : true,
"api-port" : "4028",
"expiry" : "120",
"failover-only" : true,
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "30",
"scrypt" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}
HELP! THANKS!
Any ideas? lmk.
Bump? I would appreciate if OP can post tutorials on how to configure cgminer more easily; yes, I read the manual and they didn't say anything about alternating CPU/GPU parameters.
So.. *BUMP*. Thanks.
I currently have over 3,000 unpaid shares during my 24/7 mining run. Do I have to completely stop mining for those shares to even make it to the unconfirmed category? I'm a little concerned.
Any ideas? lmk.
I just joined! And cgminer is now running! I hope we will find a block soon! It's worth so much money :p
Anyways, how do I find out how many MH/s I am running? I am not seeing anything cgminer screen. LMK.
Anyways, how do I find out how many MH/s I am running? I am not seeing anything cgminer screen. LMK.
how can i manually withdraw my coins ?? i dont see any option in the dashboard like other pools ??
Set autopayout threshold to 1.
how can i manually withdraw my coins ?? i dont see any option in the dashboard like other pools ??
It's working again.
K.
K.
unconfirmed blocks have stopped getting confirmations?
I think something may be wrong.
K.
I think something may be wrong.
K.
I have a few tags in your pool but can't figure out how to withdraw. With most pools, it's on the same page where I edit account settings but I can't find the withdrawal function anywhere on your pool website.
Just set your payout threshold to mininmum amount and you will get your coins. (Automatic Payout Threshold)
Thanks.
I have a few tags in your pool but can't figure out how to withdraw. With most pools, it's on the same page where I edit account settings but I can't find the withdrawal function anywhere on your pool website.
My friend tried to join, and you have the pool set to no new registrations, unless he's doing something wrong?
K.
K.
You can register on the pool now.
Thanks!
Jump to: