Put some load on the 5v line (old cd-rom/hdd) and your PSU should run without shutting down. I also use very cheap PSUs without any problem.
Thanks by the way. Tried it and it did stabilize things quite a bit. Highly recommended.
Topic: [ANN] Technobit HEX8A1 -240 GHs Coincraft A1 board- Finished production - page 17. (Read 72425 times)
March 13, 2014, 05:12:59 AM
Put some load on the 5v line (old cd-rom/hdd) and your PSU should run without shutting down. I also use very cheap PSUs without any problem.
Thanks by the way. Tried it and it did stabilize things quite a bit. Highly recommended.
March 13, 2014, 04:43:57 AM
March 13, 2014, 04:15:51 AM
Is it running batter with them or is there another reason for using it. I think this drops might be router related...
EDIT: what is that something set to 0 or something like that I remember reading about but can't remember right now and do search.
EDIT: what is that something set to 0 or something like that I remember reading about but can't remember right now and do search.
March 13, 2014, 04:09:14 AM
Thank you. When i plug 5 hex8 miner to the RPI, then the CPU usage goes up to 99%. I dont have any solution for this, i use now 2 rpi's.
Is that it?
Code:
Mem: 16400K used, 12956K free, 0K shrd, 1724K buff, 4620K cached
CPU: 34% usr 26% sys 4% nic 33% idle 0% io 0% irq 0% sirq
Load average: 2.65 2.22 2.09 8/65 2079
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
760 752 root S 75220 256% 65% /usr/bin/cgminer --hexmineru-frequenc
CPU: 34% usr 26% sys 4% nic 33% idle 0% io 0% irq 0% sirq
Load average: 2.65 2.22 2.09 8/65 2079
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
760 752 root S 75220 256% 65% /usr/bin/cgminer --hexmineru-frequenc
March 12, 2014, 10:25:34 PM
I don't think it is just that
000: HEX8 0: 260 1000/1003mV | 5.871G/252.0Gh/s | A:274432 R:2064/0.75% HW:0/0.00% WU: 3.6/m
Same setting but it happens more offer and I get 30Gh less out...
EDIT: Less then 1GH
000: HEX8 0: 260 1000/1004mV | 553.4M/249.1Gh/s | A:279552 R:2064/0.73% HW:0/0.00% WU: 3.6/m
000: HEX8 0: 260 1000/1003mV | 5.871G/252.0Gh/s | A:274432 R:2064/0.75% HW:0/0.00% WU: 3.6/m
Same setting but it happens more offer and I get 30Gh less out...
EDIT: Less then 1GH
000: HEX8 0: 260 1000/1004mV | 553.4M/249.1Gh/s | A:279552 R:2064/0.73% HW:0/0.00% WU: 3.6/m
March 12, 2014, 10:03:45 PM
This is what happens. On some boards more offend then others:
001: HEX8 1: 260 1000/ 998mV | 10.62G/282.0Gh/s | A:158720 R:1034/0.65% HW:0/0.00% WU: 3.8/m
Sometimes it goes down to less then 1Gh...
001: HEX8 1: 260 1000/ 998mV | 10.62G/282.0Gh/s | A:158720 R:1034/0.65% HW:0/0.00% WU: 3.8/m
Sometimes it goes down to less then 1Gh...
There is a variation on hashrate but i never see 10 GH/s.
March 12, 2014, 09:50:44 PM
This is what happens. On some boards more offend then others:
001: HEX8 1: 260 1000/ 998mV | 10.62G/282.0Gh/s | A:158720 R:1034/0.65% HW:0/0.00% WU: 3.8/m
Sometimes it goes down to less then 1Gh...
001: HEX8 1: 260 1000/ 998mV | 10.62G/282.0Gh/s | A:158720 R:1034/0.65% HW:0/0.00% WU: 3.8/m
Sometimes it goes down to less then 1Gh...
March 12, 2014, 08:17:06 PM
Do boards stop mining from time to time? And then start again... First I thought it is because of too many boards on one router but it happens with only 2 on it too. Is there a setting I can change or something?
No, that should not happen.
I only had one board so i am not sure what is the cause.
March 12, 2014, 07:49:43 PM
Do boards stop mining from time to time? And then start again... First I thought it is because of too many boards on one router but it happens with only 2 on it too. Is there a setting I can change or something?
March 12, 2014, 06:18:07 PM
Is that it?
Code:
Mem: 16400K used, 12956K free, 0K shrd, 1724K buff, 4620K cached
CPU: 34% usr 26% sys 4% nic 33% idle 0% io 0% irq 0% sirq
Load average: 2.65 2.22 2.09 8/65 2079
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
760 752 root S 75220 256% 65% /usr/bin/cgminer --hexmineru-frequenc
CPU: 34% usr 26% sys 4% nic 33% idle 0% io 0% irq 0% sirq
Load average: 2.65 2.22 2.09 8/65 2079
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
760 752 root S 75220 256% 65% /usr/bin/cgminer --hexmineru-frequenc
Indeed
March 12, 2014, 06:02:29 PM
Is that it?
Code:
Mem: 16400K used, 12956K free, 0K shrd, 1724K buff, 4620K cached
CPU: 34% usr 26% sys 4% nic 33% idle 0% io 0% irq 0% sirq
Load average: 2.65 2.22 2.09 8/65 2079
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
760 752 root S 75220 256% 65% /usr/bin/cgminer --hexmineru-frequenc
CPU: 34% usr 26% sys 4% nic 33% idle 0% io 0% irq 0% sirq
Load average: 2.65 2.22 2.09 8/65 2079
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
760 752 root S 75220 256% 65% /usr/bin/cgminer --hexmineru-frequenc
March 12, 2014, 05:57:24 PM
Can u please write me a "top" result with these miners?!
By top you mean what? Best share? Total hashrate? Best hashrate?iFA88 mean top command. He want to see your CPU & memory usage
March 12, 2014, 05:45:43 PM
Can u please write me a "top" result with these miners?!
By top you mean what? Best share? Total hashrate? Best hashrate? March 12, 2014, 01:25:00 PM
March 12, 2014, 12:15:27 PM
March 12, 2014, 11:30:18 AM
410 will be enough up to 240 clock setting
March 12, 2014, 11:13:33 AM
It looks like 6 is too much for one router...
And I still need to plug in more... But PSU I bought aren't working as I though they will so I need to shout down some more old miner and take there PSU... I would thought that 410W on 12V would be enough...
Code:
cgminer version 4.0.0 - Started: [2014-03-12 16:30:02]
------------------------------------------------------------------------------------------
(5s):1.631T (avg):1.576Th/s | A:937986 R:3484 HW:6 WU:26.4/m
ST: 1 SS: 3 NB: 4 LW: 953634 GF: 0 RF: 1
Connected to eu-stratum-lb489kj.btcguild.com diff 1.02K with stratum as user
Block: e1864380... Diff:3.82G Started: [17:12:31] Best share: 541K
------------------------------------------------------------------------------------------
[U]SB device management [P]ool management [S]ettings [D]isplay options [Q]uit
000: HEX8 0: 260 1000/1008mV | 678.1G/286.2Gh/s | A:169986 R:1086/0.63% HW:0/0.00% WU: 4.7/m
001: HEX8 1: 260 1000/1004mV | 147.1G/281.1Gh/s | A:167936 R: 78/0.05% HW:2/0.98% WU: 4.7/m
002: HEX8 2: 260 1000/1010mV | 106.1G/269.1Gh/s | A:159744 R:1092/0.68% HW:0/0.00% WU: 4.5/m
003: HEX8 3: 260 1000/1010mV | 291.9G/233.1Gh/s | A:139264 R: 68/0.05% HW:0/0.00% WU: 4.0/m
004: HEX8 4: 260 1000/ 999mV | 420.6G/258.8Gh/s | A:153600 R:1110/0.72% HW:4/2.02% WU: 4.5/m
005: HEX8 5: 260 1000/1000mV | 57.23G/248.5Gh/s | A:148480 R: 50/0.03% HW:0/0.00% WU: 4.0/m
------------------------------------------------------------------------------------------
[2014-03-12 17:12:04] Accepted 15ba154b Diff 3.02K/1024 HEX8 3
[2014-03-12 17:12:06] Accepted 1fe387cc Diff 2.06K/1024 HEX8 5
[2014-03-12 17:12:08] Accepted 05115557 Diff 12.9K/1024 HEX8 3
[2014-03-12 17:12:11] Accepted 3b1ebd34 Diff 1.11K/1024 HEX8 0
[2014-03-12 17:12:11] Accepted 321e43d8 Diff 1.31K/1024 HEX8 2
[2014-03-12 17:12:13] Accepted 131faefe Diff 3.43K/1024 HEX8 1
[2014-03-12 17:12:13] Accepted 2c6e9e38 Diff 1.48K/1024 HEX8 2
[2014-03-12 17:12:18] Accepted 13ea1486 Diff 3.29K/1024 HEX8 3
[2014-03-12 17:12:20] Accepted 3a9d8ded Diff 1.12K/1024 HEX8 3
[2014-03-12 17:12:22] Accepted 24b5e61d Diff 1.79K/1024 HEX8 1
[2014-03-12 17:12:31] Stratum from pool 0 detected new block
[2014-03-12 17:12:32] Accepted 1f4672da Diff 2.1K/1024 HEX8 0
[2014-03-12 17:12:34] Accepted 14ce1911 Diff 3.15K/1024 HEX8 3
[2014-03-12 17:12:36] Accepted 197eb2e1 Diff 2.57K/1024 HEX8 4
[2014-03-12 17:12:38] Accepted 08488b65 Diff 7.91K/1024 HEX8 4
[2014-03-12 17:12:45] Accepted 2f09f2ee Diff 1.39K/1024 HEX8 0
[2014-03-12 17:12:48] Accepted 33e5f1fa Diff 1.26K/1024 HEX8 0
[2014-03-12 17:12:49] Accepted 39e9fbb8 Diff 1.13K/1024 HEX8 0
------------------------------------------------------------------------------------------
(5s):1.631T (avg):1.576Th/s | A:937986 R:3484 HW:6 WU:26.4/m
ST: 1 SS: 3 NB: 4 LW: 953634 GF: 0 RF: 1
Connected to eu-stratum-lb489kj.btcguild.com diff 1.02K with stratum as user
Block: e1864380... Diff:3.82G Started: [17:12:31] Best share: 541K
------------------------------------------------------------------------------------------
[U]SB device management [P]ool management [S]ettings [D]isplay options [Q]uit
000: HEX8 0: 260 1000/1008mV | 678.1G/286.2Gh/s | A:169986 R:1086/0.63% HW:0/0.00% WU: 4.7/m
001: HEX8 1: 260 1000/1004mV | 147.1G/281.1Gh/s | A:167936 R: 78/0.05% HW:2/0.98% WU: 4.7/m
002: HEX8 2: 260 1000/1010mV | 106.1G/269.1Gh/s | A:159744 R:1092/0.68% HW:0/0.00% WU: 4.5/m
003: HEX8 3: 260 1000/1010mV | 291.9G/233.1Gh/s | A:139264 R: 68/0.05% HW:0/0.00% WU: 4.0/m
004: HEX8 4: 260 1000/ 999mV | 420.6G/258.8Gh/s | A:153600 R:1110/0.72% HW:4/2.02% WU: 4.5/m
005: HEX8 5: 260 1000/1000mV | 57.23G/248.5Gh/s | A:148480 R: 50/0.03% HW:0/0.00% WU: 4.0/m
------------------------------------------------------------------------------------------
[2014-03-12 17:12:04] Accepted 15ba154b Diff 3.02K/1024 HEX8 3
[2014-03-12 17:12:06] Accepted 1fe387cc Diff 2.06K/1024 HEX8 5
[2014-03-12 17:12:08] Accepted 05115557 Diff 12.9K/1024 HEX8 3
[2014-03-12 17:12:11] Accepted 3b1ebd34 Diff 1.11K/1024 HEX8 0
[2014-03-12 17:12:11] Accepted 321e43d8 Diff 1.31K/1024 HEX8 2
[2014-03-12 17:12:13] Accepted 131faefe Diff 3.43K/1024 HEX8 1
[2014-03-12 17:12:13] Accepted 2c6e9e38 Diff 1.48K/1024 HEX8 2
[2014-03-12 17:12:18] Accepted 13ea1486 Diff 3.29K/1024 HEX8 3
[2014-03-12 17:12:20] Accepted 3a9d8ded Diff 1.12K/1024 HEX8 3
[2014-03-12 17:12:22] Accepted 24b5e61d Diff 1.79K/1024 HEX8 1
[2014-03-12 17:12:31] Stratum from pool 0 detected new block
[2014-03-12 17:12:32] Accepted 1f4672da Diff 2.1K/1024 HEX8 0
[2014-03-12 17:12:34] Accepted 14ce1911 Diff 3.15K/1024 HEX8 3
[2014-03-12 17:12:36] Accepted 197eb2e1 Diff 2.57K/1024 HEX8 4
[2014-03-12 17:12:38] Accepted 08488b65 Diff 7.91K/1024 HEX8 4
[2014-03-12 17:12:45] Accepted 2f09f2ee Diff 1.39K/1024 HEX8 0
[2014-03-12 17:12:48] Accepted 33e5f1fa Diff 1.26K/1024 HEX8 0
[2014-03-12 17:12:49] Accepted 39e9fbb8 Diff 1.13K/1024 HEX8 0
And I still need to plug in more...
But PSU I bought aren't working as I though they will so I need to shout down some more old miner and take there PSU... I would thought that 410W on 12V would be enough... March 12, 2014, 09:59:51 AM
For some reason it just start working... I think it was dropbox upload that slow down my network too much...
Thanks Zich for pointing me in the right direction and marto74 for offering to help...
How is the board working? Thanks Zich for pointing me in the right direction and marto74 for offering to help...
March 12, 2014, 08:32:44 AM
For some reason it just start working... I think it was dropbox upload that slow down my network too much...
Thanks Zich for pointing me in the right direction and marto74 for offering to help...
Thanks Zich for pointing me in the right direction and marto74 for offering to help...
March 12, 2014, 08:28:18 AM
Can someone help me figure out what I'm I doing wrong.
Set router password
Set router timezone
Set router time
Reboot
Setup pools
SSH on router
screen -r
and I see this
teamviewer inside your network pleaseSet router password
Set router timezone
Set router time
Reboot
Setup pools
SSH on router
screen -r
and I see this
Code:
ntpd: resolved peer 3.openwrt.pool.ntp.org to 89.212.75.6
ntpd: sent query to 89.212.75.6
ntpd: resolved peer 2.openwrt.pool.ntp.org to 193.95.228.232
ntpd: sent query to 193.95.228.232
ntpd: resolved peer 1.openwrt.pool.ntp.org to 193.2.78.2
ntpd: sent query to 193.2.78.2
ntpd: resolved peer 0.openwrt.pool.ntp.org to 89.212.160.254
ntpd: sent query to 89.212.160.254
ntpd: reply from 89.212.75.6: reach 0x01 offset -6.394512 delay 15.235440 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.006912
ntpd: reply from 193.95.228.232: reach 0x01 offset -3.555069 delay 10.418542 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.005386
ntpd: reply from 193.2.78.2: reach 0x01 offset -1.131939 delay 4.735346 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.000458
Alarm clock
ntpd: sent query to 89.212.75.6
ntpd: resolved peer 2.openwrt.pool.ntp.org to 193.95.228.232
ntpd: sent query to 193.95.228.232
ntpd: resolved peer 1.openwrt.pool.ntp.org to 193.2.78.2
ntpd: sent query to 193.2.78.2
ntpd: resolved peer 0.openwrt.pool.ntp.org to 89.212.160.254
ntpd: sent query to 89.212.160.254
ntpd: reply from 89.212.75.6: reach 0x01 offset -6.394512 delay 15.235440 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.006912
ntpd: reply from 193.95.228.232: reach 0x01 offset -3.555069 delay 10.418542 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.005386
ntpd: reply from 193.2.78.2: reach 0x01 offset -1.131939 delay 4.735346 status 0x24 strat 2 refid 0xc1020175 rootdelay 0.000458
Alarm clock
After that what you see. Some patience is needed
Triple check pool url, worker and pass.And tell us what cgminer tells you
Jump to: