Topic: [ANN] [TWC] TwilightCoin-X11-Fair Mining-Fast block-ASIC-proof-LAUNCHED! - page 10. (Read 37888 times)
April 22, 2014, 11:54:17 AM
which is the best exchange to use.
April 22, 2014, 11:42:53 AM
The P2Pool is rocking, 12 blocks found in the past 2 hours! Come join us! http://p2pool.thepeeps.net:8285
April 22, 2014, 11:00:37 AM
Any explanation what had happened with TWC wallet?
It was Dark Gravity Wave v.2 bug which affected Win32 wallets.
In some cases re-download of blockchain may be required (not always).
If you are still stuck at the block 1354 after wallet re-installation - please close wallet, remove everything BUT wallet.dat in the twilightcoin folder of your profile and run wallet again.
Please don't remove wallet.dat file accidentally! Copy it into another folder before removing any files.
April 22, 2014, 10:46:08 AM
Issue with windows wallet has been fixed.
That was really quick!
I remember I mined Microcoin a couple of months ago and suddenly all wallets stopped synchronizing.
It took them ~17 hours to chase down that issue and get it fixed.
Any explanation what had happened with TWC wallet?
April 22, 2014, 10:34:02 AM
Attention TwilightCoin community!
Issue with windows wallet has been fixed. Please re-download a new version of the wallet from the site, single-file executable version can be run as is, setup version can be simply re-installed over the existing version. There is no need to delete or resync or re-download blockchain.
Window setup wallet: www.twilightcoin.com/download/twilightcoin-0.9.0.0-win32-setup.exe
Windows single-file wallet: www.twilightcoin.com/download/twilightcoin-qt.exe
Issue with windows wallet has been fixed. Please re-download a new version of the wallet from the site, single-file executable version can be run as is, setup version can be simply re-installed over the existing version. There is no need to delete or resync or re-download blockchain.
Window setup wallet: www.twilightcoin.com/download/twilightcoin-0.9.0.0-win32-setup.exe
Windows single-file wallet: www.twilightcoin.com/download/twilightcoin-qt.exe
I must delete and re-download blockchain.
April 22, 2014, 10:29:46 AM
Now we want to ask you which one of exchange markets do you prefer TWC to be traded at?
Some markets are more expensive to get to and even high volumes wouldn't help it. So we need to choose wisely.
Some markets are more expensive to get to and even high volumes wouldn't help it. So we need to choose wisely.
I would say Poloniex would be a good target.
However, since they don't have a clear voting system it's a bit hard to figure out what do we need to do to get there.
I guess we all should send requests to Poloniex so they see how we support this coin.
yeah have todo that. lets go to poloniex
April 22, 2014, 10:23:09 AM
Attention TwilightCoin community!
Issue with windows wallet has been fixed. Please re-download a new version of the wallet from the site, single-file executable version can be run as is, setup version can be simply re-installed over the existing version. There is no need to delete or resync or re-download blockchain.
Window setup wallet: www.twilightcoin.com/download/twilightcoin-0.9.0.0-win32-setup.exe
Windows single-file wallet: www.twilightcoin.com/download/twilightcoin-qt.exe
Issue with windows wallet has been fixed. Please re-download a new version of the wallet from the site, single-file executable version can be run as is, setup version can be simply re-installed over the existing version. There is no need to delete or resync or re-download blockchain.
Window setup wallet: www.twilightcoin.com/download/twilightcoin-0.9.0.0-win32-setup.exe
Windows single-file wallet: www.twilightcoin.com/download/twilightcoin-qt.exe
April 22, 2014, 10:18:31 AM
Now we want to ask you which one of exchange markets do you prefer TWC to be traded at?
Some markets are more expensive to get to and even high volumes wouldn't help it. So we need to choose wisely.
Some markets are more expensive to get to and even high volumes wouldn't help it. So we need to choose wisely.
I would say Poloniex would be a good target.
However, since they don't have a clear voting system it's a bit hard to figure out what do we need to do to get there.
I guess we all should send requests to Poloniex so they see how we support this coin.
April 22, 2014, 09:14:17 AM
Coin is fork?
In the wallet 1354 blocks
On the pool 1507 blocks
In the wallet 1354 blocks
On the pool 1507 blocks
There is an issue that affected Windows wallet only.
We are investigating it right now.
Will provide you with explanations and fix soon.
April 22, 2014, 09:03:51 AM
could please someone post their sgminer settings for a sapphire 280x 1020/1500, I`m having problems to start the miner ,all I get is unable to init gpu thread , I tried diffrent settings but I always get the same error
Code:
sgminer.exe --kernel darkcoin -o stratum+tcp://pool.xhash.net:3362 -u x.1 -p x --thread-concurrency 8192 -g 2 -w 256 --lookup-gap 2 -I 13 --gpu-powertune -20 --gpu-memclock 1800 --gpu-engine 1100
I just tried your settings and I still get the same response( unable to open darkcoin.cl or kernel/darkcoin.cl for reading,failed to init gpu thread 0, disabling device 0 )
does anyone know what the problem is , I thought all a have to do is make a bat file like the one in scrypt mining . did I miss something
thanks
April 22, 2014, 08:49:49 AM
could please someone post their sgminer settings for a sapphire 280x 1020/1500, I`m having problems to start the miner ,all I get is unable to init gpu thread , I tried diffrent settings but I always get the same error
Code:
sgminer.exe --kernel darkcoin -o stratum+tcp://pool.xhash.net:3362 -u x.1 -p x --thread-concurrency 8192 -g 2 -w 256 --lookup-gap 2 -I 13 --gpu-powertune -20 --gpu-memclock 1800 --gpu-engine 1100
I just tried your settings and I still get the same response( unable to open darkcoin.cl or kernel/darkcoin.cl for reading,failed to init gpu thread 0, disabling device 0 )
does anyone know what the problem is , I thought all a have to do is make a bat file like the one in scrypt mining . did I miss something
April 22, 2014, 08:48:01 AM
could please someone post their sgminer settings for a sapphire 280x 1020/1500, I`m having problems to start the miner ,all I get is unable to init gpu thread , I tried diffrent settings but I always get the same error
I don't have 280x, but if you post your settings I could help. Setting are much easier to set than scrypt.I get the response( unable to open darkcoin.cl or kernel/darkcoin.cl for reading,failed to init gpu thread 0, disabling device 0 ), I tried the settings from the previous post
Code:
sgminer -k darkcoin -o stratum+tcp://xxxxxx -u xxxx -p xxx -I 13
April 22, 2014, 08:02:38 AM
Coin is fork?
In the wallet 1354 blocks
On the pool 1507 blocks
In the wallet 1354 blocks
On the pool 1507 blocks
April 22, 2014, 07:05:35 AM
April 22, 2014, 06:23:37 AM
something wrong with wallet, last payout from http://twc.altmine.net/static/ obtained at 9:16 (4 hour ago), wallet always freeze at block 1177 on moment when I delete local blockchain and no more payout from this time. Its fork there or where is problem?
April 22, 2014, 05:52:41 AM
could please someone post their sgminer settings for a sapphire 280x 1020/1500, I`m having problems to start the miner ,all I get is unable to init gpu thread , I tried diffrent settings but I always get the same error
I don't have 280x, but if you post your settings I could help. Setting are much easier to set than scrypt.I get the response( unable to open darkcoin.cl or kernel/darkcoin.cl for reading,failed to init gpu thread 0, disabling device 0 ), I tried the settings from the previous post
April 22, 2014, 05:50:13 AM
could please someone post their sgminer settings for a sapphire 280x 1020/1500, I`m having problems to start the miner ,all I get is unable to init gpu thread , I tried diffrent settings but I always get the same error
Code:
sgminer.exe --kernel darkcoin -o stratum+tcp://pool.xhash.net:3362 -u x.1 -p x --thread-concurrency 8192 -g 2 -w 256 --lookup-gap 2 -I 13 --gpu-powertune -20 --gpu-memclock 1800 --gpu-engine 1100
I just tried your settings and I still get the same response( unable to open darkcoin.cl or kernel/darkcoin.cl for reading,failed to init gpu thread 0, disabling device 0 )
does anyone know what the problem is , I thought all a have to do is make a bat file like the one in scrypt mining . did I miss something
April 22, 2014, 05:17:48 AM
could please someone post their sgminer settings for a sapphire 280x 1020/1500, I`m having problems to start the miner ,all I get is unable to init gpu thread , I tried diffrent settings but I always get the same error
Code:
sgminer.exe --kernel darkcoin -o stratum+tcp://pool.xhash.net:3362 -u x.1 -p x --thread-concurrency 8192 -g 2 -w 256 --lookup-gap 2 -I 13 --gpu-powertune -20 --gpu-memclock 1800 --gpu-engine 1100
April 22, 2014, 05:02:00 AM
could please someone post their sgminer settings for a sapphire 280x 1020/1500, I`m having problems to start the miner ,all I get is unable to init gpu thread , I tried diffrent settings but I always get the same error
I don't have 280x, but if you post your settings I could help. Setting are much easier to set than scrypt. April 22, 2014, 03:59:17 AM
could please someone post their sgminer settings for a sapphire 280x 1020/1500, I`m having problems to start the miner ,all I get is unable to init gpu thread , I tried diffrent settings but I always get the same error
Jump to: