Topic: [ANN] United SciFi Coin [SCIFI] PoW/PoS - page 15. (Read 41662 times)

Just started my wallet
45.50.28.121:7013

Thanks 

UFC   (port=17009)
scifi.bounceme.net:17009
47.20.250.38
62.227.93.234
198.154.60.61
115.28.132.245

https://bitcointalksearch.org/topic/sci-fi-coin-online-status-1121146

oh lol, not United SciFi Coin nodes. I need United Federation Credit nodes mate 

https://altminer.net/explorer/peers?id=1822

Hi all. UFC is completely dead?  I need some working nodes plz.

ccminer  -a scrypt  -o stratum+tcp://eu1.altminer.net:3433 -u SZcPV129SWExNWL7TLmLjY4XQuErhMq7e5 -p c=SCIFI

C:\Users\Riggf\Desktop\ccminer-1.8-dev-tpruvot-x11evo\ccminer-1-8-dev-tpruvot-x11evo>ccminer  -a scrypt  -S opencl:auto -o stratum+tcp://eu1.altminer.net:3433 -u SZcPV129SWExNWL7TLmLjY4XQuErhMq7e5 -p c=SCIFI
*** ccminer 1.8-dev for nVidia GPUs by tpruvot@github ***
    Built with VC++ 2013 and nVidia CUDA SDK 6.5

  Originally based on Christian Buchner and Christian H. project
  Include some of the work of djm34, sp, tsiv and klausT.

BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)

unknown option -- S
Try `ccminer --help' for more information.

Scrypt specific options:
  -l, --launch-config   gives the launch configuration for each kernel
                        in a comma separated list, one per device.
  -L, --lookup-gap      Divides the per-hash memory requirement by this factor
                        by storing only every N'th value in the scratchpad.
                        Default is 1.
      --interactive     comma separated list of flags (0/1) specifying
                        which of the CUDA device you need to run at inter-
                        active frame rates (because it drives a display).
      --texture-cache   comma separated list of flags (0/1/2) specifying
                        which of the CUDA devices shall use the texture
                        cache for mining. Kepler devices may profit.
      --no-autotune     disable auto-tuning of kernel launch parameters


I can now open the prog, but my miner quit after 2 secounds. Wath could this bee?

ccminer  -a scrypt  -S opencl:auto -o stratum+tcp://eu1.altminer.net:3433 -u SZcPV129SWExNWL7TLmLjY4XQuErhMq7e5 -p c=SCIFI  Now it should be right

-a scrypt not --scrypt

C:\Users\Riggf\Desktop\ccminer-1.8-dev-tpruvot-x11evo\ccminer-1-8-dev-tpruvot-x11evo>ccminer  --scrypt  -S opencl:auto -o stratum+tcp://eu1.altminer.net:3433 -u SZcPV129SWExNWL7TLmLjY4XQuErhMq7e5 -p c=SCIFI
*** ccminer 1.8-dev for nVidia GPUs by tpruvot@github ***
    Built with VC++ 2013 and nVidia CUDA SDK 6.5

  Originally based on Christian Buchner and Christian H. project
  Include some of the work of djm34, sp, tsiv and klausT.

BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)



It start but quit imidently

ccminer  --scrypt  -S opencl:auto -o stratum+tcp://eu1.altminer.net:3433 -u SZcPV129SWExNWL7TLmLjY4XQuErhMq7e5 -p c=SCIFI

ccminer -o stratum+tcp://eu1.altminer.net: -u [-p ]

There is my config, cant open it. and even find a port on pools homepage, wath are wrong here

Just check altminer.net pool using addr Sd3iGyiYFc2nS4gfXaPGm8Dk78U9cFAFmn and rent rig on minigrigrentals, all work fine, no rejected shares.

That's a lot. Well, I think bfgminer uses SHA256d as default, try to enable scrypt:

bfgminer --scrypt -I 15 -S opencl:auto -o stratum+tcp://eu1.altminer.net:3433/#xnsub#skipcbcheck -u SP7KwfXEKNnnKAw6Kc3sYseKpSeSsPmQKC -p c=SCIFI

Works fine on my test rig:

The value 15 for intensity came just from memory as suitable for my GPU. You might set it lower or higher. Reduce it, if the temerature rises to high or you see hardware errors/your rig freezes. Otherwise feel free to increase it.

98% one share was accecpted so far

mogrith, what is your percentage of rejected shares? I have < 1% on this pool, just as an indication what might be okay or not. Not sure about scrypt GPU mining at the moment, but as far as I can remember the hardware error rate should be checked as well (as it might indicate a need for optimizing GPU related settings).

rejected block simply float away into the ether!

miner still not quite right

 [2017-08-24 21:19:13] Stratum from pool 0 detected new block
 [2017-08-24 21:21:37] Found block for pool 0!
 [2017-08-24 21:21:37] Rejected 01ef3fd2 OCL 0  Diff 132/128 (Invalid share)
 [2017-08-24 21:23:27] Network difficulty changed to 16 (115.1Mh)
 [2017-08-24 21:23:27] Stratum from pool 0 detected new block


have several of these rejected found blocks

Try re-synch from scratch. DPZ have not many blocks and it will be fast.
For re-synch use new empty wallet - then start with working wallet.

that seems to have done it. looks like it's working now I just need to get some accepted shares

---

now that SCIFI is wallet is running and miner is working.

DPZ  got new wallet it connected 2 connections but seems stuck at block 381383

---

That is from old wallet info should I clear out old blockchain and let it d/l from scratch?

With 1.2 mil DPZ want to get that traded.  only small amounts of KED GPL etc