Topic: [ANN] USCoin - Here's the change! [USC] - page 7. (Read 17873 times)
Guys, also make sure you are starting the QT in server mode...
Nope, a single wallet with an 'rpcallowip:x.x.x.x' per machine in the uscoin.conf will do it 
but if i dont have wallet where can i put uscoin.conf?
You only need the single wallet (let's call it the host @ 192.168.1.1) and you just edit that particular .conf file.
So, if you want to connect machine 2 (192.168.1.2) to the host, your host/wallet would have rpcallowip:192.168.1.2. Then, your miner would be instructed to connect to 192.168.1.1:whateverport .
Hopefully I'm not forgetting something/making a stupid mistake in this explanation, heh.
"rpcport=80" < I don't think you need that.
rpcuser=x
rpcpassword=x
maxconnections=100
rpcallowip=127.0.0.1
rpcallowip=192.168.1.1
rpcallowip=192.168.*.*
rpcport=9332
testnet=0
daemon=1
server=1
gen=0
is this good?
Color 0E
cgminer --scrypt -s 5 --queue 0 --expiry 5 -o http://192.168.1.1:8888 -u x -p x FOR RIG2
Color 0E
cgminer --scrypt -s 5 --queue 0 --expiry 5 -o http://192.168.1.1:8888 -u x -p x FOR RIG3
correct?
And gimme your wallet
Nope, a single wallet with an 'rpcallowip:x.x.x.x' per machine in the uscoin.conf will do it
but if i dont have wallet where can i put uscoin.conf?
You only need the single wallet (let's call it the host @ 192.168.1.1) and you just edit that particular .conf file.
So, if you want to connect machine 2 (192.168.1.2) to the host, your host/wallet would have rpcallowip:192.168.1.2. Then, your miner would be instructed to connect to 192.168.1.1:whateverport .
Hopefully I'm not forgetting something/making a stupid mistake in this explanation, heh.
"rpcport=80" < I don't think you need that.
rpcuser=x
rpcpassword=x
maxconnections=100
rpcallowip=127.0.0.1
rpcallowip=192.168.1.1
rpcallowip=192.168.*.*
rpcport=9332
rpcport=80
testnet=0
daemon=1
server=1
gen=0
is this good?
Color 0E
cgminer --scrypt -s 5 --queue 0 --expiry 5 -o http://127.0.0.1:9332 -u x -p x for cg?
rpcpassword=x
maxconnections=100
rpcallowip=127.0.0.1
rpcallowip=192.168.1.1
rpcallowip=192.168.*.*
rpcport=9332
rpcport=80
testnet=0
daemon=1
server=1
gen=0
is this good?
Color 0E
cgminer --scrypt -s 5 --queue 0 --expiry 5 -o http://127.0.0.1:9332 -u x -p x for cg?
solo mining issues
Enabled Dead Priority 2: http://127.0.0.1:9318
testnet=0
listen=1
daemon=1
rpcuser=m
rpcpassword=x
rpcallowip=127.0.0.1
rpcport=9318
port=9116
addnode=54.217.218.132
addnode=54.217.218.219
addnode=54.217.218.231
addnode=54.217.218.234
addnode=54.217.218.238
addnode=67.233.57.113
addnode=65.87.180.248
it refuses to work
Enabled Dead Priority 2: http://127.0.0.1:9318
testnet=0
listen=1
daemon=1
rpcuser=m
rpcpassword=x
rpcallowip=127.0.0.1
rpcport=9318
port=9116
addnode=54.217.218.132
addnode=54.217.218.219
addnode=54.217.218.231
addnode=54.217.218.234
addnode=54.217.218.238
addnode=67.233.57.113
addnode=65.87.180.248
it refuses to work
I don't think that:
port=9116 is needed, but I could be wrong...lemme check my config
ok, even after removing it, the wallet confirms i am connected to the network, but cg miner still says
2: Enabled Dead Priority 2: http://127.0.0.1:9319
i've double checked the username and pass , they all match up
i did the info thing and it gave me
Pool: http://127.0.0.1:9319
Does not have own long-poll support
Nope, a single wallet with an 'rpcallowip:x.x.x.x' per machine in the uscoin.conf will do it
but if i dont have wallet where can i put uscoin.conf?
Nope, a single wallet with an 'rpcallowip:x.x.x.x' per machine in the uscoin.conf will do it
Scooby903 , I believe you are right, the secondary port listing is not necessary.
If you guys are having a bit of trouble with the p2pool you can always set a failover (solo I guess at this point) within cgminer.
If you guys are having a bit of trouble with the p2pool you can always set a failover (solo I guess at this point) within cgminer.
i dont know how to do it =/ i'd been tried it
i have 3 rigs. do i need get a wallet for each rig?
Scooby903 , I believe you are right, the secondary port listing is not necessary.
If you guys are having a bit of trouble with the p2pool you can always set a failover (solo I guess at this point) within cgminer.
If you guys are having a bit of trouble with the p2pool you can always set a failover (solo I guess at this point) within cgminer.
any arguments why would this succeed and why is this better than other coins?
you stupid -- FED launched this AnotherScamcoin for any case...
solo mining issues
Enabled Dead Priority 2: http://127.0.0.1:9318
testnet=0
listen=1
daemon=1
rpcuser=m
rpcpassword=x
rpcallowip=127.0.0.1
rpcport=9318
port=9116
addnode=54.217.218.132
addnode=54.217.218.219
addnode=54.217.218.231
addnode=54.217.218.234
addnode=54.217.218.238
addnode=67.233.57.113
addnode=65.87.180.248
it refuses to work
Enabled Dead Priority 2: http://127.0.0.1:9318
testnet=0
listen=1
daemon=1
rpcuser=m
rpcpassword=x
rpcallowip=127.0.0.1
rpcport=9318
port=9116
addnode=54.217.218.132
addnode=54.217.218.219
addnode=54.217.218.231
addnode=54.217.218.234
addnode=54.217.218.238
addnode=67.233.57.113
addnode=65.87.180.248
it refuses to work
I don't think that:
port=9116 is needed, but I could be wrong...lemme check my config
solo mining issues
Enabled Dead Priority 2: http://127.0.0.1:9318
testnet=0
listen=1
daemon=1
rpcuser=m
rpcpassword=x
rpcallowip=127.0.0.1
rpcport=9318
port=9116
addnode=54.217.218.132
addnode=54.217.218.219
addnode=54.217.218.231
addnode=54.217.218.234
addnode=54.217.218.238
addnode=67.233.57.113
addnode=65.87.180.248
it refuses to work
Enabled Dead Priority 2: http://127.0.0.1:9318
testnet=0
listen=1
daemon=1
rpcuser=m
rpcpassword=x
rpcallowip=127.0.0.1
rpcport=9318
port=9116
addnode=54.217.218.132
addnode=54.217.218.219
addnode=54.217.218.231
addnode=54.217.218.234
addnode=54.217.218.238
addnode=67.233.57.113
addnode=65.87.180.248
it refuses to work
Getting 25% stales, but getting steady payouts from the p2p pool
any problem with p2pool ?
is there any issue with stratum? Im connected and disconnected
is there any issue with stratum? Im connected and disconnected
P2Pool is slow to ramp up though. Rewards are still increasing even as difficulty went up by 16x so far. Also I seem to be missing payments for several time intervals.
P2Pool is sweet as fuck. Getting those USC coins.
Well, I just experiment. With the rate new blocks are being found, I suggest closer to 1 if not 1 for both.
Indeed, technically valid results being submitted incredibly quickly.
For now, reduce your scan and expiry times. With the rising diff, the conditions should improve steadily
For now, reduce your scan and expiry times. With the rising diff, the conditions should improve steadily
exp 3?
scan 3?
my screen show currently 2.05K
and interestingly my wallet shows Number of transactions:4
but I only see one block confirmed and
there is no more blocks show up in Transactions
and interestingly my wallet shows Number of transactions:4
but I only see one block confirmed and
there is no more blocks show up in Transactions
Transactions that don't appear are orpans, but show accepted in cgminer
oh, lesson learned, thanks.
so with the current difficult level of 0.0312522, I got 1 block confirmed, 4 orpans and dozens of rejected....
Same thing here...1 successfully mined block, 4 Orphans, and 8 rejects
Indeed, technically valid results being submitted incredibly quickly.
For now, reduce your scan and expiry times. With the rising diff, the conditions should improve steadily
Also, don't worry about the diff shown in cgminer...not really sure why it does that sometimes.
For now, reduce your scan and expiry times. With the rising diff, the conditions should improve steadily
Also, don't worry about the diff shown in cgminer...not really sure why it does that sometimes.
Jump to: