who have coins ? go to shared
y кoгo ecть мoнeты? зoвy в шapeд нoдy
https://t.me/shared_masternodes
Topic: [ANN]🔥🚀 VIRTUS (VRT)| Tribus-PoW-MasterNode | PrivateSend & AtomicSwap active✨ - page 16. (Read 34086 times)
February 23, 2018, 07:29:39 AM
February 23, 2018, 05:11:14 AM
When listing on the exchanges?
February 23, 2018, 04:49:26 AM
Can't open your Italian thread...
Yes. Problem have. Probably thread was deleted (
February 23, 2018, 04:23:29 AM
Can't open your Italian thread...
February 23, 2018, 03:41:33 AM
Good luck with the project dev, I'll keep an eye on it. Curious to see the price of the coin after listing on the exchanges. Any prediction?
It's crypto bro...
A prediction dont work here )
February 23, 2018, 03:11:58 AM
Good luck with the project dev, I'll keep an eye on it. Curious to see the price of the coin after listing on the exchanges. Any prediction?
February 23, 2018, 02:44:22 AM
Virtus Masternode Setup Guide
This is a complete guide to setup Virtus (VRT) masternode on Ubuntu Vps.
Here I will show how to setup Virtus masternode on Ubuntu 16.04 x64 (1Gb Ram).
First of all download latest Virtus wallet on your local PC and let it sync.
Once it is fully synced then encrypt the wallet.
Then backup your wallet.
You need have 25000.1 VRT in your wallet.
MAIN WALLET ON YOUR LOCAL PC
First of all unlock your wallet, go to Settings > Unlock wallet
To setup your Main Virtus wallet go to Tools > Debug Console
Then type
Code:
masternode genkey
save the output in a text file. It will be referred as YOUR_PRIVATE_KEY
Then type
Code:
getnewaddress MN1
Wait for 1 confirmation, then go to the debug console and type
Code:
masternode outputs
Save these two strings in a text file.
Note that if you get more than 1 line, it's because you made multiple 25000 coins transactions, with the tx_id and digit associated
Next, go to Tools > Open masternode configuration file
Open the masternode.conf file and type at the bottom:
Code:
MN1 your_vps_ip:13881 YOUR_PRIVATE_KEY tx_id digit
Save it and close it.
Note that each line of the masternode.conf file corresponds to one masternode.
Now you need open Masternode tab, go to Settings > Options > Wallet > check Show masternode tab
Restart your main wallet.
MASTERNODE WALLET ON VPS
If you don't have enough RAM, create 2–4GB of swap memory
Code:
sudo fallocate -l 4G /swapfile
sudo chmod 600 /swapfile
sudo mkswap /swapfile
sudo swapon /swapfile
echo '/swapfile none swap sw 0 0' | sudo tee -a /etc/fstab
For work with text files we need install nano
Code:
sudo apt-get update
sudo apt-get install nano
If you have a clean system, you need to install several dependencies
Code:
sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils
sudo apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev
sudo apt-get install libboost-all-dev
sudo apt-get install curl
sudo apt install software-properties-common
sudo add-apt-repository ppa:bitcoin/bitcoin
sudo apt-get update
sudo apt-get install libdb4.8-dev libdb4.8++-dev
sudo apt-get install libminiupnpc-dev
sudo apt-get install libzmq3-dev
Then we need download Virtus wallet and run virtusd
Code:
wget https://github.com/VirtusPay/virtus/releases/download/v0.12.2.2/virtus-ubuntu16x64-0.12.2.2.tar.gz
tar -xvzf virtus-ubuntu16x64-0.12.2.2.tar.gz
rm virtus-ubuntu16x64-0.12.2.2.tar.gz
mv virtus-ubuntu16x64-0.12.2.2 virtus
cd virtus
./virtusd
Wait 3 minuts. After see "Warning: Make sure to encrypt your wallet and delete all non-encrypted backups after you verified that wallet works!" press Enter
wait 15 seconds and then press CTRL+C (exit from virtusd)
Open Virtus wallet configuration file
Code:
nano /root/.virtuscore/virtus.conf
and insert
Code:
rpcuser=youusername
rpcpassword=strongpassword
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
externalip=your_vps_ip:13881
masternode=1
masternodeprivkey=YOUR_PRIVATE_KEY
press CTRL+X
press Y
press ENTER
Now start you masternode wallet
Code:
./virtusd -daemon
wait 3 minuts. After see "Warning: Make sure to encrypt your wallet and delete all non-encrypted backups after you verified that wallet works!" press Enter.
Wait about 10 mins for your wallet to download the blockchain. You can check the progress with the following command :
Code:
./virtus-cli getblockcount
The block number has to catch up with the latest on the blockexplorer.
STARTING THE MASTERNODE
Go back to your MAIN wallet on local PC
First of all unlock your wallet and go to the Masternode tab.
You need to wait for 15 confirmations in order to start the masternode. Select the line corresponding to the masternode.
Click "Start-alias". Your masternode should be now switch to status PRE-ENABLED and after 15-20 minutes switch to status ENABLED !
CHECKING THE MASTERNODE STATUS
You can check the masternode status by going to the masternode wallet on your VPS and typing:
Code:
./virtus-cli masternode status
If your masternode is running it should print "Masternode successfully started".
If you have a firewall on your VPS, you need to open the 13881 port.
February 22, 2018, 08:49:55 PM
Any ideia of an exchange price or support? Just started mining on saltpool
VRT will be listed shortly after the auction, so you'll find out soon enough February 22, 2018, 04:45:27 PM
Any ideia of an exchange price or support? Just started mining on saltpool
May be more profit you will be get in long-term hold?
February 22, 2018, 03:52:43 PM
Any ideia of an exchange price or support? Just started mining on saltpool
February 22, 2018, 09:58:32 AM
MasterNode auctions
To further improve the VirtusPay project, two MasterNode auctions will be organized. Funds gathered from auctions will go straight to exchange listings, ranking websites, promotion and future development.
Total will be sold 10 MN.
First MN-auction (5 MN) - 20.00PM 23.Feb.2018 UTC
Second MN-aucton (5 MN) - 08.00AM 25.Feb.2018 UTC
The auctions will be held in our discord channel https://discord.gg/SUQ6zT5 (preliminary registration is required, please PM)
AUCTION RULES:
1) First MN-auction (5 MN) starts at 20.00PM 23.Feb.2018 UTC
2) Second MN-aucton (5 MN) starts at 08.00AM 25.Feb.2018 UTC
3) Auction will take place at closed "MN_auction" channel. Preliminary registration is required, please PM, please contact @VirtusPay for access
4) Starting price: 1 BTC
5) Minimum bid: 0,05 BTC
6) The duration of each lot is 3 minutes. After this, the participant with the highest bid is considered the winner
7) The winner gets 5001 VRT to start the MN (without VPS)
8 ) Payment must be made within 3 hours after the end of the auction. Carefully check the contact - only VirtusPay#0569 can give you an address for payment.
9) Masternodes not paid on time are transferred to the next date
February 22, 2018, 07:47:59 AM
Japanese translation has done https://bitcointalksearch.org/topic/ann-virtus-vrt-tribus-pow-ico-2991793 My address VRMdcMoJ3jbGkftowXQ5Yb9Aq8mb8iaqBq
February 22, 2018, 05:50:32 AM
Sorry, but we are not owners of hash4.life.
Currently, there are temporary difficulties with the payment of this pool.
But they have a good reputation and after the arrival of the owner everything will be fixed.
...All is fine, success for the VRT! Thank you. Currently, there are temporary difficulties with the payment of this pool.
But they have a good reputation and after the arrival of the owner everything will be fixed.
February 22, 2018, 05:09:41 AM
We have made changes to the source code.
Now it is compiled without errors.
Enjoy!
Now it is compiled without errors.
Enjoy!
February 22, 2018, 03:31:25 AM
Right ticker is VRT
Sorry for typos
Sorry for typos
February 22, 2018, 03:15:06 AM
Masternode Collateral: 5000 VTS
MasterNode Rewards: 40% or 8 VTS
-
please change to VTR - so people do not get confused
MasterNode Rewards: 40% or 8 VTS
-
please change to VTR - so people do not get confused
Not VTR ))
VRT
February 22, 2018, 12:24:26 AM
A little attention!
On our pool https://pool.webdevs.top/ updated the demon of the wallet!
The new version was compiled without errors, unlike the first one.
We test our capacities, invite the community to join our pool with 0% fee.
An example of a batch file:
On our pool https://pool.webdevs.top/ updated the demon of the wallet!
The new version was compiled without errors, unlike the first one.
We test our capacities, invite the community to join our pool with 0% fee.
An example of a batch file:
Code:
ccminer -a tribus -o stratum + tcp://pool.webdevs.top: 8533 -u VAwhpobsbL2ar7DJbLx6GttNt3m9GJKDtV -p c = VRT
Thanks. We made some corrections in the source code
February 21, 2018, 10:44:22 PM
airdrop?
February 21, 2018, 05:24:30 PM
Hello, all!
https://hash4.pw/
Fast pool for Virtus! Fee 0%!
Our server located in USA.
We test our pool with our capacities, join us!
Discord pool support chat: https://discord.gg/g3FKbmm
Welcome, all!
https://hash4.pw/
Code:
-o stratum+tcp://hash4.pw:8533 -u-p c=VRT
Fast pool for Virtus! Fee 0%!
Our server located in USA.
We test our pool with our capacities, join us!
Discord pool support chat: https://discord.gg/g3FKbmm
Welcome, all!
February 21, 2018, 04:40:31 PM
Masternode Collateral: 5000 VTS
MasterNode Rewards: 40% or 8 VTS
-
please change to VTR - so people do not get confused
MasterNode Rewards: 40% or 8 VTS
-
please change to VTR - so people do not get confused
Jump to: