I got just enough over a coin today. Is That normal for todays difficulty? Right now i am mining in a pool. For hashrate see above.
If the difficulty rises that that will happen.
Topic: [ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay] - page 1033. (Read 2375939 times)
If the difficulty rises that that will happen.
I got just enough over a coin today. Is That normal for todays difficulty? Right now i am mining in a pool. For hashrate see above.
My wallet says,
My weight is 68,
Network weight is 655132.
Expected time to earn rewards 10 days....
What does it mean? I have to keep my pc open for 10 days without any interruption for 10 days to get reward ?? And how much I will get after 10 days ?? Please help me
My weight is 68,
Network weight is 655132.
Expected time to earn rewards 10 days....
What does it mean? I have to keep my pc open for 10 days without any interruption for 10 days to get reward ?? And how much I will get after 10 days ?? Please help me
The expected time is very coarse. It'll look very different between at the very beginning and after staking few hours. How many coins in your wallet, and how much time coins sitting in the wallet for staking? It's not necessary to keep the wallet open to get the rewards. Let's say we know expecting reward coming in tomorrow, you can just open it up by that time; but use cautious as PoS-II is very different from general PoS. You can always get PoS reward in a general PoS staking, but it depends for PoS-II.
I have 94 coins
I have earned all of them from pool mining and I have not sent any coin to others. take a look.
And please tell me what I should do to stake correctly. And how much POS reward I will get ?
My wallet says,
My weight is 68,
Network weight is 655132.
Expected time to earn rewards 10 days....
What does it mean? I have to keep my pc open for 10 days without any interruption for 10 days to get reward ?? And how much I will get after 10 days ?? Please help me
My weight is 68,
Network weight is 655132.
Expected time to earn rewards 10 days....
What does it mean? I have to keep my pc open for 10 days without any interruption for 10 days to get reward ?? And how much I will get after 10 days ?? Please help me
The expected time is very coarse. It'll look very different between at the very beginning and after staking few hours. How many coins in your wallet, and how much time coins sitting in the wallet for staking? It's not necessary to keep the wallet open to get the rewards. Let's say we know expecting reward coming in tomorrow, you can just open it up by that time; but use cautious as PoS-II is very different from general PoS. You can always get PoS reward in a general PoS staking, but it depends for PoS-II.
XMG is still looking for players on cryptocoins-dice.com !
Will try this one tonight! Testing my luck!
https://bitcointalksearch.org/topic/the-future-of-crypto-best-etablished-pow-coin-to-buy-or-mine-in-913172
Magi is doing nice here! Some extra votes would be cool!
Magi is doing nice here! Some extra votes would be cool!
XMG is still looking for players on cryptocoins-dice.com !
My wallet says,
My weight is 68,
Network weight is 655132.
Expected time to earn rewards 10 days....
What does it mean? I have to keep my pc open for 10 days without any interruption for 10 days to get reward ?? And how much I will get after 10 days ?? Please help me
My weight is 68,
Network weight is 655132.
Expected time to earn rewards 10 days....
What does it mean? I have to keep my pc open for 10 days without any interruption for 10 days to get reward ?? And how much I will get after 10 days ?? Please help me
Not sure about your CPU - I have problems with AMD 8320.
I got a i5 2500 @ ~4,5ghz. right now i am getting ~55khs/s, is that normal or is there a way to improve my rate?
Is that overclocked?
I would expect you to be able to get a bit more out of it than 55 Kh/s. What operating system do you have and what minerd are you using?
yes it's overclocked, iam on widows 8.1 and iam using your latest 64 bit miner. Would -e cpu_efficiency improve anything
No. The -e option is default 100 percent and can only be set to something less. I don't think that the version of source code that I used includes this option anyway. I have an external application that creates the same effect - the XMG Miner Speed Controller :-
This is a self-extracting zip file which will unzip to C:\XMGminer\MinerSpeed by default. When unzipped, run the Setup.bat file which creates a startup script and a Desktop icon for you.
EDIT: That overclocking looks extreme. Are you sure that the CPU is not "throttling" due to over-temperature? The miner pushes your CPU to the limit.
2nd EDIT: You might also try running multiple instances of minerd.exe with a single thread each, as opposed to a single instance of minerd.exe with multiple threads. There is a measurable difference.
Edit: Running the miner with all 4 cores gives me 65-70 khs/s right now. Could the drop be affected by a gpu miner for another coin?
Edit2: speed changed to like ~55khs/s without gpu running anything, so i guess it's no the gpus fault.
Edit3: How to use your miner speed controler? I unziped in ran setup.bat and opened the desktop link, thats it? My miner that was still running doped a view khs/s and is now below 50 khs/s
Edit4: I guess i found out why the hashrate was droping, i started my bitcoin wallet(wich is not up to date and is updating for days now) and that caused the drop, because the wallet used over 30% CPU speed. Closing the wallet gives me again 65 khs/s. the miner now uses around 97-98% cpu
I have same problem, my speed / CPU clock keeps dropping.
I played a lot with BIOS, nothing helps! It's 'cos of high temp that its throttling!
When I put PC on window shell so it has cold air flow its stable and temps lot lower
I got 4 120mm fans inside my pc and running them at ~1000rpm my cpu's temp is at stable 64C°. I get a warning if it gets over 70C° and if it does i can always increase the fan speed
I got a i5 2500 @ ~4,5ghz. right now i am getting ~55khs/s, is that normal or is there a way to improve my rate?
Is that overclocked?
I would expect you to be able to get a bit more out of it than 55 Kh/s. What operating system do you have and what minerd are you using?
yes it's overclocked, iam on widows 8.1 and iam using your latest 64 bit miner. Would -e cpu_efficiency improve anything
No. The -e option is default 100 percent and can only be set to something less. I don't think that the version of source code that I used includes this option anyway. I have an external application that creates the same effect - the XMG Miner Speed Controller :-
This is a self-extracting zip file which will unzip to C:\XMGminer\MinerSpeed by default. When unzipped, run the Setup.bat file which creates a startup script and a Desktop icon for you.
EDIT: That overclocking looks extreme. Are you sure that the CPU is not "throttling" due to over-temperature? The miner pushes your CPU to the limit.
2nd EDIT: You might also try running multiple instances of minerd.exe with a single thread each, as opposed to a single instance of minerd.exe with multiple threads. There is a measurable difference.
Edit: Running the miner with all 4 cores gives me 65-70 khs/s right now. Could the drop be affected by a gpu miner for another coin?
Edit2: speed changed to like ~55khs/s without gpu running anything, so i guess it's no the gpus fault.
Edit3: How to use your miner speed controler? I unziped in ran setup.bat and opened the desktop link, thats it? My miner that was still running doped a view khs/s and is now below 50 khs/s
Edit4: I guess i found out why the hashrate was droping, i started my bitcoin wallet(wich is not up to date and is updating for days now) and that caused the drop, because the wallet used over 30% CPU speed. Closing the wallet gives me again 65 khs/s. the miner now uses around 97-98% cpu
I have same problem, my speed / CPU clock keeps dropping.
I played a lot with BIOS, nothing helps! It's 'cos of high temp that its throttling!
When I put PC on window shell so it has cold air flow its stable and temps lot lower
I got a i5 2500 @ ~4,5ghz. right now i am getting ~55khs/s, is that normal or is there a way to improve my rate?
Is that overclocked?
I would expect you to be able to get a bit more out of it than 55 Kh/s. What operating system do you have and what minerd are you using?
yes it's overclocked, iam on widows 8.1 and iam using your latest 64 bit miner. Would -e cpu_efficiency improve anything
No. The -e option is default 100 percent and can only be set to something less. I don't think that the version of source code that I used includes this option anyway. I have an external application that creates the same effect - the XMG Miner Speed Controller :-
This is a self-extracting zip file which will unzip to C:\XMGminer\MinerSpeed by default. When unzipped, run the Setup.bat file which creates a startup script and a Desktop icon for you.
EDIT: That overclocking looks extreme. Are you sure that the CPU is not "throttling" due to over-temperature? The miner pushes your CPU to the limit.
2nd EDIT: You might also try running multiple instances of minerd.exe with a single thread each, as opposed to a single instance of minerd.exe with multiple threads. There is a measurable difference.
Edit: Running the miner with all 4 cores gives me 65-70 khs/s right now. Could the drop be affected by a gpu miner for another coin?
Edit2: speed changed to like ~55khs/s without gpu running anything, so i guess it's no the gpus fault.
Edit3: How to use your miner speed controler? I unziped in ran setup.bat and opened the desktop link, thats it? My miner that was still running doped a view khs/s and is now below 50 khs/s
Edit4: I guess i found out why the hashrate was droping, i started my bitcoin wallet(wich is not up to date and is updating for days now) and that caused the drop, because the wallet used over 30% CPU speed. Closing the wallet gives me again 65 khs/s. the miner now uses around 97-98% cpu
Edit5: The Gpu miner has a low impact of 0-0,1% CPU use, minerd gets around 65-68khs/s is this still low?
CoinMagi has been added to Comkort exchange!
Three markets are live BTC, LTC, DOGE.
Best buy prices:
0.00006220 BTC per 1 XMG - BTC market
0.00775080 LTC per 1 XMG - LTC market
103.36666683 DOGE per 1 XMG - DOGE market
Happy & Profitable Trading!
Three markets are live BTC, LTC, DOGE.
Best buy prices:
0.00006220 BTC per 1 XMG - BTC market
0.00775080 LTC per 1 XMG - LTC market
103.36666683 DOGE per 1 XMG - DOGE market
Happy & Profitable Trading!
Any way to check via the command line? Didn't see anything in the header files.
USE: getinfo, and locate a line "expected time ...", notice the expected time is only an estimate. There is no "expected time..." line in the getinfo output...
I think Joe meant to say use getmininginfo
Thanks Spexx, should be getmininginfo --> "Expected PoS ..."
XMG speed controller is great! tried it on my old dual core E6600 machine. set it to 85% speed and it keeps the temps down. My 1st core likes to overheat.
Great program.
Is that overclocked?
I would expect you to be able to get a bit more out of it than 55 Kh/s. What operating system do you have and what minerd are you using?
yes it's overclocked, iam on widows 8.1 and iam using your latest 64 bit miner. Would -e cpu_efficiency improve anything
No. The -e option is default 100 percent and can only be set to something less. I don't think that the version of source code that I used includes this option anyway. I have an external application that creates the same effect - the XMG Miner Speed Controller :-
https://www.dropbox.com/s/wbtmlktiy32b3xw/XMGMinerSpeed.exe
This is a self-extracting zip file which will unzip to C:\XMGminer\MinerSpeed by default. When unzipped, run the Setup.bat file which creates a startup script and a Desktop icon for you.
EDIT: That overclocking looks extreme. Are you sure that the CPU is not "throttling" due to over-temperature? The miner pushes your CPU to the limit.
2nd EDIT: You might also try running multiple instances of minerd.exe with a single thread each, as opposed to a single instance of minerd.exe with multiple threads. There is a measurable difference.
Great program.
I got a i5 2500 @ ~4,5ghz. right now i am getting ~55khs/s, is that normal or is there a way to improve my rate?
Is that overclocked?
I would expect you to be able to get a bit more out of it than 55 Kh/s. What operating system do you have and what minerd are you using?
yes it's overclocked, iam on widows 8.1 and iam using your latest 64 bit miner. Would -e cpu_efficiency improve anything
No. The -e option is default 100 percent and can only be set to something less. I don't think that the version of source code that I used includes this option anyway. I have an external application that creates the same effect - the XMG Miner Speed Controller :-
https://www.dropbox.com/s/wbtmlktiy32b3xw/XMGMinerSpeed.exe
This is a self-extracting zip file which will unzip to C:\XMGminer\MinerSpeed by default. When unzipped, run the Setup.bat file which creates a startup script and a Desktop icon for you.
EDIT: That overclocking looks extreme. Are you sure that the CPU is not "throttling" due to over-temperature? The miner pushes your CPU to the limit.
2nd EDIT: You might also try running multiple instances of minerd.exe with a single thread each, as opposed to a single instance of minerd.exe with multiple threads. There is a measurable difference.
I will take some of that.
Had a bite myself. No BTC left to buy any more
I will take some of that.
Nice lump of cheap XMG on Poloniex right now. 5300 seems a very fair price.
I got a i5 2500 @ ~4,5ghz. right now i am getting ~55khs/s, is that normal or is there a way to improve my rate?
Is that overclocked?
I would expect you to be able to get a bit more out of it than 55 Kh/s. What operating system do you have and what minerd are you using?
yes it's overclocked, iam on widows 8.1 and iam using your latest 64 bit miner. Would -e cpu_efficiency improve anything
No. The -e option is default 100 percent and can only be set to something less. I don't think that the version of source code that I used includes this option anyway. I have an external application that creates the same effect - the XMG Miner Speed Controller :-
https://www.dropbox.com/s/wbtmlktiy32b3xw/XMGMinerSpeed.exe
This is a self-extracting zip file which will unzip to C:\XMGminer\MinerSpeed by default. When unzipped, run the Setup.bat file which creates a startup script and a Desktop icon for you.
EDIT: That overclocking looks extreme. Are you sure that the CPU is not "throttling" due to over-temperature? The miner pushes your CPU to the limit.
2nd EDIT: You might also try running multiple instances of minerd.exe with a single thread each, as opposed to a single instance of minerd.exe with multiple threads. There is a measurable difference.
Magi on Bitcoin event 2015 in Amsterdam, the Netherlands.
LOL Quite impressive! Another proof that this project have proffesional hard working team and a bright future!!
Keep the good job guys!! I'm with you!
Well done!!!
Welcome new official promo movie of MAGI? I would say YES
Welcome new official promo movie of MAGI? I would say YES
Jump to: