Also, based on current Hashrate, two big pools get most of the shares. There is no chance for small pool to survive. Small pool is playing for pure luck.
Don't waste your time to setup a new small pool. Not worth it.
Topic: [ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay] - page 324. (Read 2375939 times)
I used and modified https://github.com/ganjitoka/nomp-bp to setup luckypool.ml . I haven't tried the first option. Maybe you can ask the owner for help.
You can try https://github.com/edward0181/NOMP-m7m
Or
https://github.com/ganjitoka/nomp-stratum-bp
https://github.com/ganjitoka/nomp-bp
https://github.com/ganjitoka/nomp-multi-hashing-bp
Thanks, i am using some file from edward0181.. but always, get messages...Or
https://github.com/ganjitoka/nomp-stratum-bp
https://github.com/ganjitoka/nomp-bp
https://github.com/ganjitoka/nomp-multi-hashing-bp
Code:
. return multiHashing.m7m.apply(this, arguments);
^
TypeError: Cannot call method 'apply' of undefined
^
TypeError: Cannot call method 'apply' of undefined
Hi All,
I was hoping you guys could help. I've been traveling for many days so forgive me if this is a known problem. I had read the wallet at Bittrex was up. A few days ago I sent some of my Magi's to Bittrex. I show it as gone from the wallet but not at Bittrex. This is the Transaction
https://chainz.cryptoid.info/xmg/tx.dws?96a0b1f4fc64c22a6154acccd4b106f8f82a82d196f0f44cc1d6e611118b01d7.htm
Thoughts?
B
I was hoping you guys could help. I've been traveling for many days so forgive me if this is a known problem. I had read the wallet at Bittrex was up. A few days ago I sent some of my Magi's to Bittrex. I show it as gone from the wallet but not at Bittrex. This is the Transaction
https://chainz.cryptoid.info/xmg/tx.dws?96a0b1f4fc64c22a6154acccd4b106f8f82a82d196f0f44cc1d6e611118b01d7.htm
Thoughts?
B
Hello Magi community !
It is possible to use Minerd with a priority option ?
-E Efficiency & -T Thread option are useless...
Idle option or Priority would be great.
use "start /low minerd.exe" in command line. It is possible to use Minerd with a priority option ?
-E Efficiency & -T Thread option are useless...
Idle option or Priority would be great.
Linux use renice command renice -n 10 -p pid
windows I do not know.
windows I do not know.
I think you did not understand my request.
Im talking about possibility to use minerd in priority mode (priority process) Idle or Priority.
-E -T options = manual cpu use.
For example : If im launching programe using alot CPU , Minerd puts in place to give priority to the other program.
If my program use 95% CPU, then Minerd use 5%
Im talking about possibility to use minerd in priority mode (priority process) Idle or Priority.
-E -T options = manual cpu use.
For example : If im launching programe using alot CPU , Minerd puts in place to give priority to the other program.
If my program use 95% CPU, then Minerd use 5%
m-minerd you can
-t thread_numbers -e cpu_efficiency
It's the same thing.
What parameters for priority ?
yes.. it is
m-minerd you can
-t thread_numbers -e cpu_efficiency
It's the same thing.
What parameters for priority ?
Hello Magi community !
It is possible to use Minerd with a priority option ?
-E Efficiency & -T Thread option are useless...
Idle option or Priority would be great.
m-minerd you can It is possible to use Minerd with a priority option ?
-E Efficiency & -T Thread option are useless...
Idle option or Priority would be great.
Hello Magi community !
It is possible to use Minerd with a priority option ?
-E Efficiency & -T Thread option are useless...
Idle option or Priority would be great.
It is possible to use Minerd with a priority option ?
-E Efficiency & -T Thread option are useless...
Idle option or Priority would be great.
i configure in algoProperties.js to deploy magic pool
m7mhash: {
hash: function(){
return function(){
return multiHashing.m7mhash.apply(this, arguments);
}
}
}
the system is ok
the worker connect
the pool crash
Really i don't find answer
Ofcourse we will pay you for your services
P.M
m7mhash: {
hash: function(){
return function(){
return multiHashing.m7mhash.apply(this, arguments);
}
}
}
the system is ok
Code:
[2017-09-23 12:51:14.705] [INFO] [default] - New Relic
[2017-09-23 12:51:14.707] [DEBUG] [default] - NewRelic Monitor New Relic initiated
[2017-09-23 12:51:14.708] [INFO] [default] - POSIX Not Installed
[2017-09-23 12:51:14.708] [DEBUG] [default] - POSIX Connection Limit (Safe to ignore) POSIX module not installed and resource (connection) limit was not raised
[2017-09-23 12:51:14.708] [INFO] [default] - Run Workers
[2017-09-23 12:51:14.966] [DEBUG] [default] - Master PoolSpawner Spawned 1 pool(s) on 1 thread(s)
[2017-09-23 12:51:15.398] [INFO] [default] - New Relic
[2017-09-23 12:51:15.401] [INFO] [default] - POSIX Not Installed
[2017-09-23 12:51:15.402] [INFO] [default] - Run Workers
[2017-09-23 12:51:15.410] [INFO] [default] - Switching Setup Thread 1 Loading last proxy state from redis
[2017-09-23 12:51:15.417] [DEBUG] [default] - Pool magicoin Thread 1 Share processing setup with redis (127.0.0.1:6379)
[2017-09-23 12:51:15.448] [DEBUG] [default] - Pool magicoin Thread 1 started for magicoin [XMG] {m7mhash}
Network Connected: Mainnet
font=Verdana]Detected ReOSrd Type: POW
Current Block Height: 1489428
Current Connect Peers: 2
Current Block Diff: 2.305667004
Network Difficulty: NaN
Network Hash Rate: 30.37 MH
Stratum Port(s): 3008, 3032, 3256
Pool Fee Percent: 1%
Block polling every: 1000 ms
[2017-09-23 12:51:15.449] [DEBUG] [default] - Switching Setup m7mhash Setting proxy difficulties after pool start
[2017-09-23 12:51:24.719] [DEBUG] [default] - Master CLI CLI listening on port 17117
[2017-09-23 12:51:25.598] [INFO] [default] - New Relic
[2017-09-23 12:51:25.597] [INFO] [default] - New Relic
[2017-09-23 12:51:25.604] [INFO] [default] - POSIX Not Installed
[2017-09-23 12:51:25.605] [INFO] [default] - Run Workers
[2017-09-23 12:51:25.604] [INFO] [default] - POSIX Not Installed
[2017-09-23 12:51:25.605] [INFO] [default] - Run Workers
[2017-09-23 12:51:25.633] [DEBUG] [default] - Payments magicoin Payment processing setup to run every 600 sekannon(s) with daemon ([email protected]:8232) and redis (127.0.0.1:6379)
[2017-09-23 12:51:25.676] [DEBUG] [default] - Website Server Website started on xxxxx:80
[2017-09-23 12:51:14.707] [DEBUG] [default] - NewRelic Monitor New Relic initiated
[2017-09-23 12:51:14.708] [INFO] [default] - POSIX Not Installed
[2017-09-23 12:51:14.708] [DEBUG] [default] - POSIX Connection Limit (Safe to ignore) POSIX module not installed and resource (connection) limit was not raised
[2017-09-23 12:51:14.708] [INFO] [default] - Run Workers
[2017-09-23 12:51:14.966] [DEBUG] [default] - Master PoolSpawner Spawned 1 pool(s) on 1 thread(s)
[2017-09-23 12:51:15.398] [INFO] [default] - New Relic
[2017-09-23 12:51:15.401] [INFO] [default] - POSIX Not Installed
[2017-09-23 12:51:15.402] [INFO] [default] - Run Workers
[2017-09-23 12:51:15.410] [INFO] [default] - Switching Setup Thread 1 Loading last proxy state from redis
[2017-09-23 12:51:15.417] [DEBUG] [default] - Pool magicoin Thread 1 Share processing setup with redis (127.0.0.1:6379)
[2017-09-23 12:51:15.448] [DEBUG] [default] - Pool magicoin Thread 1 started for magicoin [XMG] {m7mhash}
Network Connected: Mainnet
font=Verdana]Detected ReOSrd Type: POW
Current Block Height: 1489428
Current Connect Peers: 2
Current Block Diff: 2.305667004
Network Difficulty: NaN
Network Hash Rate: 30.37 MH
Stratum Port(s): 3008, 3032, 3256
Pool Fee Percent: 1%
Block polling every: 1000 ms
[2017-09-23 12:51:15.449] [DEBUG] [default] - Switching Setup m7mhash Setting proxy difficulties after pool start
[2017-09-23 12:51:24.719] [DEBUG] [default] - Master CLI CLI listening on port 17117
[2017-09-23 12:51:25.598] [INFO] [default] - New Relic
[2017-09-23 12:51:25.597] [INFO] [default] - New Relic
[2017-09-23 12:51:25.604] [INFO] [default] - POSIX Not Installed
[2017-09-23 12:51:25.605] [INFO] [default] - Run Workers
[2017-09-23 12:51:25.604] [INFO] [default] - POSIX Not Installed
[2017-09-23 12:51:25.605] [INFO] [default] - Run Workers
[2017-09-23 12:51:25.633] [DEBUG] [default] - Payments magicoin Payment processing setup to run every 600 sekannon(s) with daemon ([email protected]:8232) and redis (127.0.0.1:6379)
[2017-09-23 12:51:25.676] [DEBUG] [default] - Website Server Website started on xxxxx:80
the worker connect
Code:
[2017-09-23 12:51:30.848] [DEBUG] [default] - Pool magicoin Thread 1 getting block notification via RPC polling
[2017-09-23 12:51:31.600] [DEBUG] [default] - Pool magicoin Thread 1 Authorized 9QodNwAEKeetejjtNZiX6N4xxxxxx:x [190.38.xx]
now whe the worker send[2017-09-23 12:51:31.600] [DEBUG] [default] - Pool magicoin Thread 1 Authorized 9QodNwAEKeetejjtNZiX6N4xxxxxx:x [190.38.xx]
Code:
[2017-09-23 08:59:56] Stratum requested work restart
[2017-09-23 08:59:56] thread 2: 261273 hashes, 5.11 khash/s
[2017-09-23 08:59:56] thread 4: 530541 hashes, 10.37 khash/s
[2017-09-23 08:59:56] thread 3: 194764 hashes, 8.83 khash/s
[2017-09-23 08:59:56] thread 5: 333126 hashes, 10.01 khash/s
[2017-09-23 08:59:56] thread 0: 495504 hashes, 9.69 khash/s
[2017-09-23 08:59:56] thread 1: 263041 hashes, 5.14 khash/s
[2017-09-23 09:00:07] thread 3: 124013 hashes, 11.22 khash/s
[color=red][2017-09-23 09:00:07] stratum_recv_line failed
[2017-09-23 09:00:07] Stratum connection interrupted[/color]
[2017-09-23 08:59:56] thread 2: 261273 hashes, 5.11 khash/s
[2017-09-23 08:59:56] thread 4: 530541 hashes, 10.37 khash/s
[2017-09-23 08:59:56] thread 3: 194764 hashes, 8.83 khash/s
[2017-09-23 08:59:56] thread 5: 333126 hashes, 10.01 khash/s
[2017-09-23 08:59:56] thread 0: 495504 hashes, 9.69 khash/s
[2017-09-23 08:59:56] thread 1: 263041 hashes, 5.14 khash/s
[2017-09-23 09:00:07] thread 3: 124013 hashes, 11.22 khash/s
[color=red][2017-09-23 09:00:07] stratum_recv_line failed
[2017-09-23 09:00:07] Stratum connection interrupted[/color]
the pool crash
Code:
/home/ubuntu/unomp/node_modules/merged-pooler/lib/algoProperties.js:227
return multiHashing.m7mhash.apply(this, arguments);
^
TypeError: Cannot call method 'apply' of undefined
at /home/ubuntu/unomp/node_modules/merged-pooler/lib/algoProperties.js:227:45
at JobManager.processShare (/home/ubuntu/unomp/node_modules/merged-pooler/lib/jobManager.js:263:26)
at null. (/home/ubuntu/unomp/node_modules/merged-pooler/lib/pool.js:630:46)
at EventEmitter.emit (events.js:117:20)
at handleSubmit (/home/ubuntu/unomp/node_modules/merged-pooler/lib/stratum.js:175:15)
at handleMessage (/home/ubuntu/unomp/node_modules/merged-pooler/lib/stratum.js:88:17)
at /home/ubuntu/unomp/node_modules/merged-pooler/lib/stratum.js:248:25
at Array.forEach (native)
at Socket. (/home/ubuntu/unomp/node_modules/merged-pooler/lib/stratum.js:234:26)
at Socket.EventEmitter.emit (events.js:95:17)
return multiHashing.m7mhash.apply(this, arguments);
^
TypeError: Cannot call method 'apply' of undefined
at /home/ubuntu/unomp/node_modules/merged-pooler/lib/algoProperties.js:227:45
at JobManager.processShare (/home/ubuntu/unomp/node_modules/merged-pooler/lib/jobManager.js:263:26)
at null.
at EventEmitter.emit (events.js:117:20)
at handleSubmit (/home/ubuntu/unomp/node_modules/merged-pooler/lib/stratum.js:175:15)
at handleMessage (/home/ubuntu/unomp/node_modules/merged-pooler/lib/stratum.js:88:17)
at /home/ubuntu/unomp/node_modules/merged-pooler/lib/stratum.js:248:25
at Array.forEach (native)
at Socket.
at Socket.EventEmitter.emit (events.js:95:17)
Really i don't find answer
Ofcourse we will pay you for your services
P.M
After updating, my wallet stopped with the stake.
Can someone help me?
Can someone help me?
Use coin control (settings -- options -- display -- display coin control features)
then you can select inputs (send -- inputs -- list) to send to your own address.
What is the optimal block size to stake?
hi. how many coins should be in my wallet to start POS ?
Hi everyone. Im newbie. I download 1.4.3 wallet and network synchronization was stoped at 132605 block (9.16%). Download 1.4.4.1 wallet and when i open it, i see "error loading block database". How i can get full sync and fix "error loading block database". Thx
Go here: http://coinmagi.org/bin/block-chain/
Delete everything you have in %appdata%\roaming\magi EXCEPT WALLET.DAT (that is in windows)
Download a most recent blockchain from the address above and unzip it into %appdata%\roaming\magi.
Using this you'll be up to date in 10-15 minutes.
Use Magi 1.4.4.1
Check also magi.conf file.
THX
Is there a community in TELEGRAN?
If so, please give me the link.
Thank you
it would be nice. If so, please give me the link.
Thank you
in OP there is no link to MAGI`s telegram group
Here is the telegram group created by jleonc01,
https://t.me/joinchat/GVNlf0KUl9wA2xZosHEVQw
Feel free to join (put it in OP too).
Does anyone know Suprnova will work?
Don't know. You can ask OCminer pm here on bitcointalk.He is a friendly guy.
Does anyone know Suprnova will work?
Hi everyone. Im newbie. I download 1.4.3 wallet and network synchronization was stoped at 132605 block (9.16%). Download 1.4.4.1 wallet and when i open it, i see "error loading block database". How i can get full sync and fix "error loading block database". Thx
Go here: http://coinmagi.org/bin/block-chain/
Delete everything you have in %appdata%\roaming\magi EXCEPT WALLET.DAT (that is in windows)
Download a most recent blockchain from the address above and unzip it into %appdata%\roaming\magi.
Using this you'll be up to date in 10-15 minutes.
Use Magi 1.4.4.1
Check also magi.conf file.
Hi everyone. Im newbie. I download 1.4.3 wallet and network synchronization was stoped at 132605 block (9.16%). Download 1.4.4.1 wallet and when i open it, i see "error loading block database". How i can get full sync and fix "error loading block database". Thx
Jump to: