Oh well, I put in 5 ETH - now holding thumbs that this project is a success.
Topic: [ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay] - page 328. (Read 2375939 times)
Then i see this on trasmamod and i start to wonder did we just fork again?
2,086.57%
Of Expected Shares
Hi. Don't worry. There is no fork.
What you refer to is that the pool is continously calculate/estimate how many shares it normally need to find a block. And due to that there has been a lot of changes in the network according hashrate and luck of finding the blocks, the pool will get "rare" estimate and real values of estimate share due to the adaption time of the new "PoW / PoS" blocks rule (because that the calculations use "old" data/values to estimate the future). After a while it will then start to show more correct.
BTW: TrasMaMod XMG pool will continoue to keep the limit of 300KH/s to create the posibility for everyone participating the pool to get a good part of the block reward, even for small miners.
Everyone is welcome to TrasMaMod XMG pool as long they respect the 300KH/s limit.
Thanks for the explanation Tommy makes perfect sense, i think i hover on the 300KH/s mark so i have my other idle machines humming over on the m-hash XMG pool so i keep all of mine within the pool limits
thanks for the pool, its been one of the best i have used even outside of XMG mining
Is there a community in TELEGRAN?
If so, please give me the link.
Thank you
If so, please give me the link.
Thank you
Will supernova ever be back up?
Idk, but with the network hashrate already as high as it is.... maybe move to another pool?
Will supernova ever be back up?
Can anyone help me, I download the new wallet 1.4.4.1, I open it and start to sync, but it never finish, how can I full sync my wallet? it just keep saying out of sync
Shutdown walletDownload example file here http://coinmagi.org/bin/example-conf/
Add line "connect=104.128.225.215" to magi.conf
Copy magi.conf to %appdata%\Magi.
Download fresh blockchain here https://poolinfo.systms.org/blockchain-1_4_4_1-1479708.zip
Remove "blocks" and "database" from %appdata%\Magi, extract "blocks" and "database" from .zip to %appdata%\Magi.
Start wallet.
now when i try to start wallet it says "Error loading block database" and don´t start
Delete the database folder and start the wallet again.
same error =(
Can anyone help me, I download the new wallet 1.4.4.1, I open it and start to sync, but it never finish, how can I full sync my wallet? it just keep saying out of sync
Shutdown walletDownload example file here http://coinmagi.org/bin/example-conf/
Add line "connect=104.128.225.215" to magi.conf
Copy magi.conf to %appdata%\Magi.
Download fresh blockchain here https://poolinfo.systms.org/blockchain-1_4_4_1-1479708.zip
Remove "blocks" and "database" from %appdata%\Magi, extract "blocks" and "database" from .zip to %appdata%\Magi.
Start wallet.
now when i try to start wallet it says "Error loading block database" and don´t start
Can anyone help me, I download the new wallet 1.4.4.1, I open it and start to sync, but it never finish, how can I full sync my wallet? it just keep saying out of sync
Shutdown walletDownload example file here http://coinmagi.org/bin/example-conf/
Add line "connect=104.128.225.215" to magi.conf
Copy magi.conf to %appdata%\Magi.
Download fresh blockchain here https://poolinfo.systms.org/blockchain-1_4_4_1-1479708.zip
Remove "blocks" and "database" from %appdata%\Magi, extract "blocks" and "database" from .zip to %appdata%\Magi.
Start wallet.
now when i try to start wallet it says "Error loading block database" and don´t start
Delete the database folder and start the wallet again.
Can anyone help me, I download the new wallet 1.4.4.1, I open it and start to sync, but it never finish, how can I full sync my wallet? it just keep saying out of sync
Shutdown walletDownload example file here http://coinmagi.org/bin/example-conf/
Add line "connect=104.128.225.215" to magi.conf
Copy magi.conf to %appdata%\Magi.
Download fresh blockchain here https://poolinfo.systms.org/blockchain-1_4_4_1-1479708.zip
Remove "blocks" and "database" from %appdata%\Magi, extract "blocks" and "database" from .zip to %appdata%\Magi.
Start wallet.
now when i try to start wallet it says "Error loading block database" and don´t start
Hello people,
We've made a bit of changes at Pool42 !
After having made a poll among our miners, it has been decided by the vast majority that the hashrate limit should be
increased from 300 KH/s to 600 KH/s in order to be able to have a larger share of the network hashrate.
LolWe've made a bit of changes at Pool42 !
After having made a poll among our miners, it has been decided by the vast majority that the hashrate limit should be
increased from 300 KH/s to 600 KH/s in order to be able to have a larger share of the network hashrate.
Thank you for your constructive comment.
You must be mistaking us with another pool. This rule is in place for 20 days.
I don't recall having discussed this with you, nor having had a real debate about it.
Furthermore we do not ban people going over the limit, these people are automatically
kicked out when they are above the limit; they're free to come back afterward.
We increased our hashrate limit as things have changed since it was setup. When it was put
in place, the average network hashrate was 50 MH/s. Now, Minerclaim and Zpool share about
120 MH/s: things have changed.
Hello people,
We've made a bit of changes at Pool42 !
After having made a poll among our miners, it has been decided by the vast majority that the hashrate limit should be
increased from 300 KH/s to 600 KH/s in order to be able to have a larger share of the network hashrate.
LolWe've made a bit of changes at Pool42 !
After having made a poll among our miners, it has been decided by the vast majority that the hashrate limit should be
increased from 300 KH/s to 600 KH/s in order to be able to have a larger share of the network hashrate.
Thank you for your constructive comment.
You must be mistaking us with another pool. This rule is in place for 20 days.
I don't recall having discussed this with you, nor having had a real debate about it.
Furthermore we do not ban people going over the limit, these people are automatically
kicked out when they are above the limit; they're free to come back afterward.
We increased our hashrate limit as things have changed since it was setup. When it was put
in place, the average network hashrate was 50 MH/s. Now, Minerclaim and Zpool share about
120 MH/s: things have changed.
Can we get thecryptopool.com listed on the first post for a mining pool?
Simply point your miners to
All coins mine at 1% fee and payouts are every two hours.
Simply point your miners to
Code:
-a m7m -o stratum+tcp://thecryptopool.com:6033 -u-p d= 512 c=XMG
All coins mine at 1% fee and payouts are every two hours.
Good to see that there is a new pool - looks like you are alredy listed on https://poolinfo.systms.org/#magi ex33s works fast =)
Can we get thecryptopool.com listed on the first post for a mining pool?
Simply point your miners to
All coins mine at 1% fee and payouts are every two hours.
Simply point your miners to
Code:
-a m7m -o stratum+tcp://thecryptopool.com:6033 -u-p d= 512 c=XMG
All coins mine at 1% fee and payouts are every two hours.
Can anyone help me, I download the new wallet 1.4.4.1, I open it and start to sync, but it never finish, how can I full sync my wallet? it just keep saying out of sync
Shutdown walletDownload example file here http://coinmagi.org/bin/example-conf/
Add line "connect=104.128.225.215" to magi.conf
Copy magi.conf to %appdata%\Magi.
Download fresh blockchain here https://poolinfo.systms.org/blockchain-1_4_4_1-1479708.zip
Remove "blocks" and "database" from %appdata%\Magi, extract "blocks" and "database" from .zip to %appdata%\Magi.
Start wallet.
Can anyone help me, I download the new wallet 1.4.4.1, I open it and start to sync, but it never finish, how can I full sync my wallet? it just keep saying out of sync
Info about TrasMaMod XMG pool:
There will be a short downtime shortly due to that we have to move the internet-lines physically in the building. The pool will be up and running within an hour again from now!
There will be a short downtime shortly due to that we have to move the internet-lines physically in the building. The pool will be up and running within an hour again from now!
The pool is now back to normal again. Internet-lines is now fixed
Welcome
Hello people,
We've made a bit of changes at Pool42 !
After having made a poll among our miners, it has been decided by the vast majority that the hashrate limit should be
increased from 300 KH/s to 600 KH/s in order to be able to have a larger share of the network hashrate.
LolWe've made a bit of changes at Pool42 !
After having made a poll among our miners, it has been decided by the vast majority that the hashrate limit should be
increased from 300 KH/s to 600 KH/s in order to be able to have a larger share of the network hashrate.
Thank you for your constructive comment.
Hmm thought value would drop after exchanges are back online.
The price is dripping for now 
Info about TrasMaMod XMG pool:
There will be a short downtime shortly due to that we have to move the internet-lines physically in the building. The pool will be up and running within an hour again from now!
There will be a short downtime shortly due to that we have to move the internet-lines physically in the building. The pool will be up and running within an hour again from now!
please fix
Jump to: