TrasMaMod XMG pool ( https://magi.trasmamod.com ) is now up and running again with the new wallet. Pool is open for mining.
Happy birthday everyone !
And I would also say thank you to @ex33s and @joelao95 for your amazing work !
Topic: [ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay] - page 350. (Read 2375622 times)
Transactions at minerclaim are not getting confirmed. Got a lot of unconfirmed coins since Yesterday and still adding up!
Anything I should know about?!
Anything I should know about?!
Hmm, still forking issues ? Any info on when those will be resolved ?
Forking issues happend with version 1.4.3.1, latest wallet is 1.4.4.1 which is going to correct those issues
See this post
m-wallet version v1.4.4.1
If you were using version prior to v1.4.4.0, the old block chain data must be deleted before launching the new wallet:
Qt-Wallet and Daemon:
https://github.com/magi-project/magi/releases
http://m-core.org/download/
http://coinmagi.org/bin/m-wallet-1.4.4.1/
Source code: https://github.com/magi-project/magi/
Windows: http://coinmagi.org/bin/m-wallet-1.4.4.1/m-wallet-1.4.4.1-win.zip
Linux: http://coinmagi.org/bin/m-wallet-1.4.4.1/m-wallet-1.4.4.1-linux.tar.gz
Mac OS X: http://coinmagi.org/bin/m-wallet-1.4.4.1/m-wallet-1.4.4.1-osx.dmg
FreeBSD: http://coinmagi.org/bin/m-wallet-1.4.4.1/m-wallet-1.4.4.1-freebsd.tar.gz
Block chain: http://coinmagi.org/bin/block-chain/
Release notes: http://coinmagi.org/bin/release-notes.md
v1.4.4.1
=============
This release solves the recent blockchain forking issue, including the follow changes:
- Synchronizing checkpoint & master server introduced; this is to remove constantly checking on the misbehaving and IP banning, along with the error "block with too little proof-of-stake or proof-of-work". The checkpoint master server and keys remain to be used from now on; they are likely to be removed in the future;
- Implemented a block generation rule: PoW / PoS blocks are mined / minted by following a pattern: 1) at least two PoS blocks minted between two consecutive PoW blocks, or PoW blocks generated every 10 minutes; 2) at least one PoW block is found in five consecutive PoS blocks, or PoS blocks generated every 3 minutes;
- Difficulty adjustment will be changed to four-block exponential moving average. When there is violation in aforementioned PoW / PoS generation rule, the difficulty remains unchanged.
The following hard forks are scheduled to implement the changes:
- block 1481500: PoW / PoS block generation rule, and also exit point of the maintenance mode;
- block 1482000: difficulty adjustment algorithm switch.
Nodes:
- 104.128.225.215
- 45.35.251.73
Blockchain download:
http://coinmagi.org/bin/block-chain/
- Windows: unpack the files and run the wallet directly;
- Mac OS: unpack the files and copy to the Application folder, and then run the wallet directly;
- Linux: unpack the files and run the wallet directly.
For a fast startup:
1) Download latest block-chain data from here: http://coinmagi.org/bin/block-chain;
2) Unzip the file and copy the folders under "m-block-chain" into the .magi (unix-like system) or Magi (OS X or Windows) folder;
3) Launch the new wallet.
If you were using version prior to v1.4.4.0, the old block chain data must be deleted before launching the new wallet:
1) Backup wallet.dat;
2) Delete all of the contents under the .magi (unix-like system) or Magi (OS X or Windows) folder, except for wallet.dat and magi.conf;
If you were using version prior to v1.4.4.0, the old block chain data must be deleted before launching the new wallet:
Qt-Wallet and Daemon:
https://github.com/magi-project/magi/releases
http://m-core.org/download/
http://coinmagi.org/bin/m-wallet-1.4.4.1/
Source code: https://github.com/magi-project/magi/
Windows: http://coinmagi.org/bin/m-wallet-1.4.4.1/m-wallet-1.4.4.1-win.zip
Linux: http://coinmagi.org/bin/m-wallet-1.4.4.1/m-wallet-1.4.4.1-linux.tar.gz
Mac OS X: http://coinmagi.org/bin/m-wallet-1.4.4.1/m-wallet-1.4.4.1-osx.dmg
FreeBSD: http://coinmagi.org/bin/m-wallet-1.4.4.1/m-wallet-1.4.4.1-freebsd.tar.gz
Block chain: http://coinmagi.org/bin/block-chain/
Release notes: http://coinmagi.org/bin/release-notes.md
v1.4.4.1
=============
This release solves the recent blockchain forking issue, including the follow changes:
- Synchronizing checkpoint & master server introduced; this is to remove constantly checking on the misbehaving and IP banning, along with the error "block with too little proof-of-stake or proof-of-work". The checkpoint master server and keys remain to be used from now on; they are likely to be removed in the future;
- Implemented a block generation rule: PoW / PoS blocks are mined / minted by following a pattern: 1) at least two PoS blocks minted between two consecutive PoW blocks, or PoW blocks generated every 10 minutes; 2) at least one PoW block is found in five consecutive PoS blocks, or PoS blocks generated every 3 minutes;
- Difficulty adjustment will be changed to four-block exponential moving average. When there is violation in aforementioned PoW / PoS generation rule, the difficulty remains unchanged.
The following hard forks are scheduled to implement the changes:
- block 1481500: PoW / PoS block generation rule, and also exit point of the maintenance mode;
- block 1482000: difficulty adjustment algorithm switch.
Nodes:
- 104.128.225.215
- 45.35.251.73
Blockchain download:
http://coinmagi.org/bin/block-chain/
- Windows: unpack the files and run the wallet directly;
- Mac OS: unpack the files and copy to the Application folder, and then run the wallet directly;
- Linux: unpack the files and run the wallet directly.
For a fast startup:
1) Download latest block-chain data from here: http://coinmagi.org/bin/block-chain;
2) Unzip the file and copy the folders under "m-block-chain" into the .magi (unix-like system) or Magi (OS X or Windows) folder;
3) Launch the new wallet.
If you were using version prior to v1.4.4.0, the old block chain data must be deleted before launching the new wallet:
1) Backup wallet.dat;
2) Delete all of the contents under the .magi (unix-like system) or Magi (OS X or Windows) folder, except for wallet.dat and magi.conf;
Hmm, still forking issues ? Any info on when those will be resolved ?
joe just released 1.4.4.1
so we hope its solved
thanks joe syncing now 
Hmm, still forking issues ? Any info on when those will be resolved ?
Hello,
I had some 300 to 350 coins at minerclaim.net pool. Today as I see they have disappeared.
Will I get those coins back or are they lost as I lost about 1000 coins a month back.
Thanks.
I had some 300 to 350 coins at minerclaim.net pool. Today as I see they have disappeared.
Will I get those coins back or are they lost as I lost about 1000 coins a month back.
Thanks.
Magi network had some issues yesterday and minerclaim.net ended up on a fork (same fork as poolinfo ended up in) so about 32 blocks is orphan blocks. Those coins might have been mined on those 32 orphan blocks.
I can't tell this affects you or not, only pool owner can. But a general rule of thumb, never have more than 30 xmg on a pool.
I'm mining on minerclaim too but set my automatic payout to 10 xmg. Which takes my 100 kh/s ~ 1day to accumulate.
Someone pls post what should magi.conf look like.
Thanks
This OK?
Thanks
This OK?
Code:
rpcuser=rpcuser
rpcpassword=rpcpass
rpcport=8232
rpcallowip=127.0.0.1
listen=0
connect=104.128.225.215
posii=1
Wallet has been updated to v1.4.4.1 and is fully synced now.
Thank you @ex33s and @joelao95
Thank you @ex33s and @joelao95
Updating our Pool: http://h2168287.stratoserver.net/MPOS/public/ at this moment.
Reverting asap once up again.
Happy Birthday Magi!
Edward.
Thank you Edward for the info, i`ll be waiting.
Pool is up and running again.
Cleared all orphans due to chain issues last night.
All should be ok again.
Happy mining!!!
Happy Birthday Magi!!! 
Can we wait for the release of the exchanges next week?
Yes amigo. Can we wait for the release of the exchanges next week?
Also lets find new services for Magi! 💪
Happy Birthday Magi!!!
Can we wait for the release of the exchanges next week?
Can we wait for the release of the exchanges next week?
Wallet has been updated to v1.4.4.1 and is fully synced now.
Thank you @ex33s and @joelao95
Thank you @ex33s and @joelao95
Updating our Pool: http://h2168287.stratoserver.net/MPOS/public/ at this moment.
Reverting asap once up again.
Happy Birthday Magi!
Edward.
Thank you Edward for the info, i`ll be waiting.
Nice work all. Great to see the Magi community helping eachother. Think its very important that people will read Joe's posts very good otherwise we will see posts again about issues because ppl did not follow the instructions.
https://bitcointalksearch.org/topic/m.21851701
If you were using version prior to v1.4.4.0, the old block chain data must be deleted before launching the new wallet:
https://bitcointalksearch.org/topic/m.21851701
If you were using version prior to v1.4.4.0, the old block chain data must be deleted before launching the new wallet:
Wallet has been updated to v1.4.4.1 and is fully synced now.
Thank you @ex33s and @joelao95
Thank you @ex33s and @joelao95
Updating our Pool: http://h2168287.stratoserver.net/MPOS/public/ at this moment.
Reverting asap once up again.
Happy Birthday Magi!
Edward.
Will clear once synced.
Wallet has been updated to v1.4.4.1 and is fully synced now.
Thank you @ex33s and @joelao95
Thank you @ex33s and @joelao95
I updated to 1.4.4.1 and now my client announce "v 1.4.4.1 available"
https://ctrlv.cz/uRdg
https://ctrlv.cz/uRdg
That chain uses Berkeley DB 5.3.28 (5.3.28-3 on Manjaro dist to be precise)
Poolinfo uses Berkeley DB 5.3.21
I see, my ubuntu using DB 4.8 from bitcoin ppa
UPDATE:
NOMP pool magi daemon now on v1.4.4.1 and synced, thanks to exc33s
pool restarted.
Pool42 is now running and synced on 1.4.4.1 ! Funds were also unlocked.
Thank you @ex33s and @joelao95 for your amazing work !
Thank you @ex33s and @joelao95 for your amazing work !
Awesome work Joe!
https://poolinfo.systms.org has been updated to v1.4.4.1 and is fully synced now.
Here's the chain I've used to get poolinfo up to date, the chain is on block 1479485 - hash 6af89d09fb27f7cfb2f0a9faf53005e41e84f9679e8b6a79fff27dbf7f2da26a
https://poolinfo.systms.org/blockchain-1_4_4_0-1479485.tar.gz
And Happy birthday Magi
https://poolinfo.systms.org has been updated to v1.4.4.1 and is fully synced now.
Here's the chain I've used to get poolinfo up to date, the chain is on block 1479485 - hash 6af89d09fb27f7cfb2f0a9faf53005e41e84f9679e8b6a79fff27dbf7f2da26a
https://poolinfo.systms.org/blockchain-1_4_4_0-1479485.tar.gz
And Happy birthday Magi
I can't use your blockchain
Code:
dev@server:~$ magid --daemon
Magi server starting
dev@sd-49766:~$ Magi: Error initializing database environment /home/dev/.magi! To recover, BACKUP THAT DIRECTORY, then remove everything from it except for wallet.dat.
Magi server starting
dev@sd-49766:~$ Magi: Error initializing database environment /home/dev/.magi! To recover, BACKUP THAT DIRECTORY, then remove everything from it except for wallet.dat.
are you using different leveldb?
That chain uses Berkeley DB 5.3.28 (5.3.28-3 on Manjaro dist to be precise)
Poolinfo uses Berkeley DB 5.3.21
Jump to: