[ANN] Zcoin (XZC) - Implementing ZKP privacy without trusted setup - page 225.

franc0

hero member

Activity: 756

Merit: 500

Hire me! Spanish translator and community manager!

Quote from: AizenSou on March 02, 2017, 08:04:22 AM

Quote from: franc0 on March 02, 2017, 01:54:46 AM

Quote from: zcoinofficial on March 02, 2017, 01:47:10 AM

Quote from: franc0 on March 02, 2017, 12:38:24 AM

Quote from: zcoinofficial on March 01, 2017, 03:47:16 AM

Quote from: franc0 on March 01, 2017, 12:01:59 AM

That was before, now i have the 8.7.7 and still having the same problem. I can't run that command in the terminal, no such file or directory it says.

If you would like for me to Teamviewer you I can assist you with this but you need to change directory to your Applications folder before you run that command.

In Terminal try /Applications/zcoin-qt -reindex

PM me if you want to arrange a Teamviewer or e-mail [email protected] if you're still having problems.

"/Applications/zcoin-qt -reindex" Same , no such file or directory. I prefer if you help me from here or pm, it's easier for me, TeamViewer is too delicate.

First of all I'm assuming you pulled zcoin-qt into your applications folder yes?

Open terminal

type cd /Applications
then type ls
it should show zcoin-qt in there
Then you can type zcoin-qt -reindex

If it's not there you probably didn't install zcoin-qt the right way (which is to just open the dmg and then drag the app into the Applications folder which is already prompted when you open the dmg).

Yes, i drag Zcoin app from the DMG to the applications folders, when i type "ls" i can see zcoin there is called zcoin-qt.app but then after that when i type "zcoin-qt -reindex" it says command not found.

You should open Terminal, go to the directory where u place zcoin-qt. Then

Quote

cd zcoin-qt.app/Contents/MacOS/
./zcoin-qt -reindex

To speed up the sync process, you could add only official nodes by going to zcoin.conf in ~/Library/Application\ Support/zcoin and add

Quote

connect=london.zcoin.io
connect=nyc.zcoin.io
connect=sf1.zcoin.io
connect=xzc.suprnova.cc

Hope it's understandable enough.

After i typed "ls" i copy paste this "cd zcoin-qt.app/Contents/MacOS/
./zcoin-qt -reindex" and it opened the zcoin app now it says reindexing blocks on disk....

I dont have any zcoin.conf file in library application support zcoin folder., or in any of the subfolders. So i can't add this anywhere.

connect=london.zcoin.io
connect=nyc.zcoin.io
connect=sf1.zcoin.io
connect=xzc.suprnova.cc

AizenSou

hero member

Activity: 938

Merit: 1000

Quote from: franc0 on March 02, 2017, 01:54:46 AM

Quote from: zcoinofficial on March 02, 2017, 01:47:10 AM

Quote from: franc0 on March 02, 2017, 12:38:24 AM

Quote from: zcoinofficial on March 01, 2017, 03:47:16 AM

Quote from: franc0 on March 01, 2017, 12:01:59 AM

That was before, now i have the 8.7.7 and still having the same problem. I can't run that command in the terminal, no such file or directory it says.

If you would like for me to Teamviewer you I can assist you with this but you need to change directory to your Applications folder before you run that command.

In Terminal try /Applications/zcoin-qt -reindex

PM me if you want to arrange a Teamviewer or e-mail [email protected] if you're still having problems.

"/Applications/zcoin-qt -reindex" Same , no such file or directory. I prefer if you help me from here or pm, it's easier for me, TeamViewer is too delicate.

First of all I'm assuming you pulled zcoin-qt into your applications folder yes?

Open terminal

type cd /Applications
then type ls
it should show zcoin-qt in there
Then you can type zcoin-qt -reindex

If it's not there you probably didn't install zcoin-qt the right way (which is to just open the dmg and then drag the app into the Applications folder which is already prompted when you open the dmg).

Yes, i drag Zcoin app from the DMG to the applications folders, when i type "ls" i can see zcoin there is called zcoin-qt.app but then after that when i type "zcoin-qt -reindex" it says command not found.

You should open Terminal, go to the directory where u place zcoin-qt. Then

Quote

cd zcoin-qt.app/Contents/MacOS/
./zcoin-qt -reindex

To speed up the sync process, you could add only official nodes by going to zcoin.conf in ~/Library/Application\ Support/zcoin and add

Quote

connect=london.zcoin.io
connect=nyc.zcoin.io
connect=sf1.zcoin.io
connect=xzc.suprnova.cc

Hope it's understandable enough.

tomsmith26

hero member

Activity: 1148

Merit: 512

Quote from: talikila on March 02, 2017, 06:34:54 AM

Dev, You say MTP will be launched in March , 2017 so now it's in March but I can not see anything about this algo.
is this algo delayed again? I hope this MTP is still on schedule.

you should be patient, guy. it will be completed at the late March, 2017 as said before and now it's in early March.
We have more 28 days to catch this algo.

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: linklinklink on March 01, 2017, 08:42:51 PM

Quote from: zcoinofficial on March 01, 2017, 08:33:39 PM

Quote from: copychicken on March 01, 2017, 02:37:37 PM

Any news on nvidia miners? Still all pools dont show what the miner shows? and difference is huge. Where is the rest of the hash going??

There are Nvidia miners out. My 1080 gets about 1700kh

Getting 1900khs with a 1070

what miner? the open source can only do 1400

talikila

sr. member

Activity: 255

Merit: 250

Dev, You say MTP will be launched in March , 2017 so now it's in March but I can not see anything about this algo.
is this algo delayed again? I hope this MTP is still on schedule.

zcoinofficial

sr. member

Activity: 1004

Merit: 268

Firo (FIRO)

Quote from: franc0 on March 02, 2017, 01:54:46 AM

Quote from: zcoinofficial on March 02, 2017, 01:47:10 AM

Quote from: franc0 on March 02, 2017, 12:38:24 AM

Quote from: zcoinofficial on March 01, 2017, 03:47:16 AM

Quote from: franc0 on March 01, 2017, 12:01:59 AM

That was before, now i have the 8.7.7 and still having the same problem. I can't run that command in the terminal, no such file or directory it says.

If you would like for me to Teamviewer you I can assist you with this but you need to change directory to your Applications folder before you run that command.

In Terminal try /Applications/zcoin-qt -reindex

PM me if you want to arrange a Teamviewer or e-mail [email protected] if you're still having problems.

"/Applications/zcoin-qt -reindex" Same , no such file or directory. I prefer if you help me from here or pm, it's easier for me, TeamViewer is too delicate.

First of all I'm assuming you pulled zcoin-qt into your applications folder yes?

Open terminal

type cd /Applications
then type ls
it should show zcoin-qt in there
Then you can type zcoin-qt -reindex

If it's not there you probably didn't install zcoin-qt the right way (which is to just open the dmg and then drag the app into the Applications folder which is already prompted when you open the dmg).

Yes, i drag Zcoin app from the DMG to the applications folders, when i type "ls" i can see zcoin there is called zcoin-qt.app but then after that when i type "zcoin-qt -reindex" it says command not found.

./zcoin-qt -reindex

Does this work?

franc0

hero member

Activity: 756

Merit: 500

Hire me! Spanish translator and community manager!

Quote from: zcoinofficial on March 02, 2017, 01:47:10 AM

Quote from: franc0 on March 02, 2017, 12:38:24 AM

Quote from: zcoinofficial on March 01, 2017, 03:47:16 AM

Quote from: franc0 on March 01, 2017, 12:01:59 AM

That was before, now i have the 8.7.7 and still having the same problem. I can't run that command in the terminal, no such file or directory it says.

If you would like for me to Teamviewer you I can assist you with this but you need to change directory to your Applications folder before you run that command.

In Terminal try /Applications/zcoin-qt -reindex

PM me if you want to arrange a Teamviewer or e-mail [email protected] if you're still having problems.

"/Applications/zcoin-qt -reindex" Same , no such file or directory. I prefer if you help me from here or pm, it's easier for me, TeamViewer is too delicate.

First of all I'm assuming you pulled zcoin-qt into your applications folder yes?

Open terminal

type cd /Applications
then type ls
it should show zcoin-qt in there
Then you can type zcoin-qt -reindex

If it's not there you probably didn't install zcoin-qt the right way (which is to just open the dmg and then drag the app into the Applications folder which is already prompted when you open the dmg).

Yes, i drag Zcoin app from the DMG to the applications folders, when i type "ls" i can see zcoin there is called zcoin-qt.app but then after that when i type "zcoin-qt -reindex" it says command not found.

zcoinofficial

sr. member

Activity: 1004

Merit: 268

Firo (FIRO)

Quote from: franc0 on March 02, 2017, 12:38:24 AM

Quote from: zcoinofficial on March 01, 2017, 03:47:16 AM

Quote from: franc0 on March 01, 2017, 12:01:59 AM

That was before, now i have the 8.7.7 and still having the same problem. I can't run that command in the terminal, no such file or directory it says.

If you would like for me to Teamviewer you I can assist you with this but you need to change directory to your Applications folder before you run that command.

In Terminal try /Applications/zcoin-qt -reindex

PM me if you want to arrange a Teamviewer or e-mail [email protected] if you're still having problems.

"/Applications/zcoin-qt -reindex" Same , no such file or directory. I prefer if you help me from here or pm, it's easier for me, TeamViewer is too delicate.

First of all I'm assuming you pulled zcoin-qt into your applications folder yes?

Open terminal

type cd /Applications
then type ls
it should show zcoin-qt in there
Then you can type zcoin-qt -reindex

If it's not there you probably didn't install zcoin-qt the right way (which is to just open the dmg and then drag the app into the Applications folder which is already prompted when you open the dmg).

franc0

hero member

Activity: 756

Merit: 500

Hire me! Spanish translator and community manager!

Quote from: zcoinofficial on March 01, 2017, 03:47:16 AM

Quote from: franc0 on March 01, 2017, 12:01:59 AM

That was before, now i have the 8.7.7 and still having the same problem. I can't run that command in the terminal, no such file or directory it says.

If you would like for me to Teamviewer you I can assist you with this but you need to change directory to your Applications folder before you run that command.

In Terminal try /Applications/zcoin-qt -reindex

PM me if you want to arrange a Teamviewer or e-mail [email protected] if you're still having problems.

"/Applications/zcoin-qt -reindex" Same , no such file or directory. I prefer if you help me from here or pm, it's easier for me, TeamViewer is too delicate.

pokeytex

legendary

Activity: 1504

Merit: 1002

Quote from: linklinklink on March 01, 2017, 08:42:51 PM

Quote from: zcoinofficial on March 01, 2017, 08:33:39 PM

Quote from: copychicken on March 01, 2017, 02:37:37 PM

Any news on nvidia miners? Still all pools dont show what the miner shows? and difference is huge. Where is the rest of the hash going??

There are Nvidia miners out. My 1080 gets about 1700kh

Getting 1900khs with a 1070

How do you get 1900 kh/s on a 1070? Can you give some detail on your rig and which miner you are using please?

linklinklink

member

Activity: 68

Merit: 10

Quote from: zcoinofficial on March 01, 2017, 08:33:39 PM

Quote from: copychicken on March 01, 2017, 02:37:37 PM

Any news on nvidia miners? Still all pools dont show what the miner shows? and difference is huge. Where is the rest of the hash going??

There are Nvidia miners out. My 1080 gets about 1700kh

Getting 1900khs with a 1070

zcoinofficial

sr. member

Activity: 1004

Merit: 268

Firo (FIRO)

Quote from: copychicken on March 01, 2017, 02:37:37 PM

Any news on nvidia miners? Still all pools dont show what the miner shows? and difference is huge. Where is the rest of the hash going??

There are Nvidia miners out. My 1080 gets about 1700kh

Woz2000

jr. member

Activity: 85

Merit: 2

If your mac is at home, try connecting it directly to your modem and reboot your mac.

Quote from: franc0 on March 01, 2017, 12:01:59 AM

Quote from: zcoinofficial on February 28, 2017, 09:42:40 PM

Is that v.0.8.7.7? I have it running from my 10.12.3 as well with no issues. Is it always stuck at a particular block?

Try running it from terminal with ./zcoin-qt -reindex and see if it works.

That was before, now i have the 8.7.7 and still having the same problem. I can't run that command in the terminal, no such file or directory it says.

igorsantos

member

Activity: 179

Merit: 10

How many kh / s does the gtx 1050 have? (zcoin)

copychicken

hero member

Activity: 784

Merit: 1000

Pools Of Honor

Any news on nvidia miners? Still all pools dont show what the miner shows? and difference is huge. Where is the rest of the hash going??

crackfoo

legendary

Activity: 3556

Merit: 1126

Quote from: crackfoo on February 23, 2017, 09:26:39 AM

Hi,

We've added XZC to the miners multipool: www.zpool.ca

lyra2z pool:

http://www.zpool.ca/site/gomining?algo=lyra2z

Explorer:

http://www.zpool.ca/explorer/XZC

Peers:

http://www.zpool.ca/explorer/peers?id=1741

Blocks found by zpool:

http://www.zpool.ca/site/block?id=1741

Cheers!

still looking to get miners sticking around. can you add to OP?

Thanks

zcoinofficial

sr. member

Activity: 1004

Merit: 268

Firo (FIRO)

Quote from: nimbus2000 on March 01, 2017, 09:04:45 AM

Quote from: zcoinofficial on February 28, 2017, 10:40:37 PM

Quote from: irukandji on February 28, 2017, 10:30:50 PM

What is Poramin doing with all the Zcoin he is collecting from Zcoins 20% share of mining?

Is he hiring any developers?

Poramin is only collecting 4% of the mining.
Currently the Founder's Reward is 20% of the block reward with 5 different wallets.
3 investors (of which 2 are initial investors and mostly absorbed by Gary)
1 is the bounty wallet (used to fund the team and other efforts such as djm34)
1 is Poramin's own wallet.

All these addresses are public in the code and previously mentioned as well. The new investor has given us enough to definitely fund development for more than a year.

Aizensou is another full time dev of ours and Poramin has hired a few programmers under him to help him as well which is why MTP is progressing smoothly despite recent challenges. djm34 is also being engaged to develop the MTP miners so we will have decent public miners when MTP releases.

As the price of Zcoin rises, we would have more to work with on the bounty wallet. At the time of writing our price we've already recovered to near the $2.00 mark.

you mean still there are two wallets kept by gary?

No the wallets are not with Gary. He holds no founder wallets now.

Goruno

sr. member

Activity: 401

Merit: 257

Quote from: zcoinofficial on March 01, 2017, 04:03:56 AM

Quote from: sczmiaomiao on March 01, 2017, 12:13:22 AM

Quote from: zcoinofficial on February 26, 2017, 10:26:02 PM

Zpool has now Lyra2z support! (http://zpool.ca/)

This means there's another quality mining pool available!

when will zcoin start mtp? Huh

As mentioned before we are on track for a end of March release on testnet.

yes, that is good news I need . I will support this coin Just buy and hold it now.
I expect this month will get a good result for investment of zcoin .

nimbus2000

newbie

Activity: 12

Merit: 0

Quote from: zcoinofficial on February 28, 2017, 10:40:37 PM

Quote from: irukandji on February 28, 2017, 10:30:50 PM

What is Poramin doing with all the Zcoin he is collecting from Zcoins 20% share of mining?

Is he hiring any developers?

Poramin is only collecting 4% of the mining.
Currently the Founder's Reward is 20% of the block reward with 5 different wallets.
3 investors (of which 2 are initial investors and mostly absorbed by Gary)
1 is the bounty wallet (used to fund the team and other efforts such as djm34)
1 is Poramin's own wallet.

All these addresses are public in the code and previously mentioned as well. The new investor has given us enough to definitely fund development for more than a year.

Aizensou is another full time dev of ours and Poramin has hired a few programmers under him to help him as well which is why MTP is progressing smoothly despite recent challenges. djm34 is also being engaged to develop the MTP miners so we will have decent public miners when MTP releases.

As the price of Zcoin rises, we would have more to work with on the bounty wallet. At the time of writing our price we've already recovered to near the $2.00 mark.

you mean still there are two wallets kept by gary?

zcoinofficial

sr. member

Activity: 1004

Merit: 268

Firo (FIRO)

Quote from: sczmiaomiao on March 01, 2017, 12:13:22 AM

Quote from: zcoinofficial on February 26, 2017, 10:26:02 PM

Zpool has now Lyra2z support! (http://zpool.ca/)

This means there's another quality mining pool available!

when will zcoin start mtp? Huh

As mentioned before we are on track for a end of March release on testnet.

Topic: [ANN] Zcoin (XZC) - Implementing ZKP privacy without trusted setup - page 225. (Read 663312 times)