Author

Topic: [ANN] Zcoin (XZC) - Implementing ZKP privacy without trusted setup - page 229. (Read 663312 times)

legendary
Activity: 1820
Merit: 1092
~Full-Time Minter since 2016~
It seems zcoin is decreasing more deeply. There is no buy support and the volume is still down more.
Maybe the big whales have left this coin because of error typing in the code. Is there any new plan for this coin, DEV?

dont u think, it is btc bullrun now? and all alts are red.

ya thats what i think too, tho it would not surprise me to have people pulling out, people need a coin they can trust :/
guess thats anon coins tho, kinda opposite transparency haha.
Zcoin will survive, as a for profit project, the market will support itself IMO. MTP will bring people back hoping for great mining maybe ;p

im pretty much just lurking till MTP, mine, dump till then
sr. member
Activity: 616
Merit: 252
It seems zcoin is decreasing more deeply. There is no buy support and the volume is still down more.
Maybe the big whales have left this coin because of error typing in the code. Is there any new plan for this coin, DEV?

dont u think, it is btc bullrun now? and all alts are red.
sr. member
Activity: 490
Merit: 262
The World’s First Blockchain Core
It seems zcoin is decreasing more deeply. There is no buy support and the volume is still down more.
Maybe the big whales have left this coin because of error typing in the code. Is there any new plan for this coin, DEV?
legendary
Activity: 1049
Merit: 1001
Any news from xzc.maxminers.net or did they take the money and run?

Looks like they have been down for a day or so
sr. member
Activity: 255
Merit: 250
On suprnova 2 hours of mining with cpu - 1350-1500 kh/s got me 0.063 xzc is this legit??

it's not worth mining now. you should buy zcoin it's very cheap now. I had to stop all miners for zcoin 3 days ago.
member
Activity: 116
Merit: 10
On suprnova 2 hours of mining with cpu - 1350-1500 kh/s got me 0.063 xzc is this legit??
hero member
Activity: 636
Merit: 516

Sooo... if fork is at block 22,000, doesn't it mean the bug is still there until the block 22,000? So coins could be still minted and dumped? Do I miss something?

 still something wrong with the rich list on https://chainz.cryptoid.info/xzc/#!rich
there's no zcoin blockchain showing the real number of coins circulated. I think the devs should pay some collected coins to find some other coders to do this.

i think you need to go do some reading about what libzerocoin actually is and does.
your comments literally make you look retarded.

also:
http://www.newsbtc.com/2017/02/19/zerocoin-updates-about-a-bug-in-the-implementation-of-zerocoin/

well, smart guy. is there any correct blockchain explorer without showing the wrong richlist? i find non.
someone has had found something wrong with the rich list last december and reported to the devs, the devs said---something wrong's with the blockchain explorer...
well, it's ok, the chainz's doing this zcoin explorer for help and for free, there's nothing to blame. and i just didn't get it when the devs found something went wrong with chainz explorer, why didn't they just build one official explorer themselves. until now, after we just paid half a million dollars for them, still there's nothing.
possiblly the devs are toooooooo busy, so spending some coins collected to recuit some new coders could be a much more feasible plan.


sigh.
again.
once coins have been minted to anonymous; you arent able to simply 'check up on them via richlist'.
as is the entire underlying basis for this technology.
sr. member
Activity: 255
Merit: 250
Which pools are preferable for mining now?

Just use https://xzc.suprnova.cc it's safe and transperent pool.
member
Activity: 116
Merit: 10
Which pools are preferable for mining now?
legendary
Activity: 1400
Merit: 1050
is something wrong with pool.mn ?? i was mining these days there and the revenue was too low. Now login has become difficult.. Is something wrong with mining xzc in general?
hmm... that pool wasn't updating their wallet to the safe version, and it was told on slack to the miners to move away from the pool
member
Activity: 116
Merit: 10
is something wrong with pool.mn ?? i was mining these days there and the revenue was too low. Now login has become difficult.. Is something wrong with mining xzc in general?
newbie
Activity: 12
Merit: 0

Sooo... if fork is at block 22,000, doesn't it mean the bug is still there until the block 22,000? So coins could be still minted and dumped? Do I miss something?

 still something wrong with the rich list on https://chainz.cryptoid.info/xzc/#!rich
there's no zcoin blockchain showing the real number of coins circulated. I think the devs should pay some collected coins to find some other coders to do this.

i think you need to go do some reading about what libzerocoin actually is and does.
your comments literally make you look retarded.

also:
http://www.newsbtc.com/2017/02/19/zerocoin-updates-about-a-bug-in-the-implementation-of-zerocoin/

well, smart guy. is there any correct blockchain explorer without showing the wrong richlist? i find non.
someone has had found something wrong with the rich list last december and reported to the devs, the devs said---something wrong's with the blockchain explorer...
well, it's ok, the chainz's doing this zcoin explorer for help and for free, there's nothing to blame. and i just didn't get it when the devs found something went wrong with chainz explorer, why didn't they just build one official explorer themselves. until now, after we just paid half a million dollars for them, still there's nothing.
possiblly the devs are toooooooo busy, so spending some coins collected to recuit some new coders could be a much more feasible plan.

 
sr. member
Activity: 255
Merit: 250
What about the error in the code of Zcoin? is it fixed already? Huh When is the MTP available for Zcoin?
sr. member
Activity: 333
Merit: 250
hi,how to set founders block rewards USE NOMP to set up a zcoin pool?
legendary
Activity: 1260
Merit: 1046
new amd kernel: speed bump around +100kh/s https://github.com/djm34/sgminer-msvc2015 (free of charge however donation are welcomed here: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze (btc)
 or here aChWVb8CpgajadpLmiwDZvZaKizQgHxfh5 (zcoin)

worksize = 32 (or lower) at least on the 290x

 
my 290x runs around 450kh/s with worksize = 32 and intensity of 18 (instead of 330kh with old kernel)


(for more recent card, may-be it is possible to use bigger worksize depeding of how much shared memory there is... have only a 290x so it is up to the user to try)
Any new version in project for nVidia cards ?
currently the nvidia cards are doing fine (the point here was to close a little the gap)
Ok, thank you for the reply :-).
Sure, nVidia version of your miner works very fine, but we allway hope better ;-).
legendary
Activity: 1400
Merit: 1050
new amd kernel: speed bump around +100kh/s https://github.com/djm34/sgminer-msvc2015 (free of charge however donation are welcomed here: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze (btc)
 or here aChWVb8CpgajadpLmiwDZvZaKizQgHxfh5 (zcoin)

worksize = 32 (or lower) at least on the 290x

 
my 290x runs around 450kh/s with worksize = 32 and intensity of 18 (instead of 330kh with old kernel)


(for more recent card, may-be it is possible to use bigger worksize depeding of how much shared memory there is... have only a 290x so it is up to the user to try)

What nvidia cards do you have?
this message is about sgminer for amd card (and have a 1070, 980, 780,750 but this updagre isn't for them)
sr. member
Activity: 273
Merit: 250
new amd kernel: speed bump around +100kh/s https://github.com/djm34/sgminer-msvc2015 (free of charge however donation are welcomed here: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze (btc)
 or here aChWVb8CpgajadpLmiwDZvZaKizQgHxfh5 (zcoin)

worksize = 32 (or lower) at least on the 290x

 
my 290x runs around 450kh/s with worksize = 32 and intensity of 18 (instead of 330kh with old kernel)


(for more recent card, may-be it is possible to use bigger worksize depeding of how much shared memory there is... have only a 290x so it is up to the user to try)

What nvidia cards do you have?
hero member
Activity: 636
Merit: 516
We have pushed the fixes for the Zerocoin bug into Github. Windows binary is already up and the rest will be up shortly:
https://github.com/zcoinofficial/zcoin/releases

Please update your wallets and nodes as soon as you can.

Bittrex trading will re-open at noon PST giving everyone some time to react. Special thanks to Bittrex for being very professional and understanding. Nova Exchange is already updating and should be up immediately once they're done. BTC38 has been informed but trading is still open there.

Also shoutout to Suprnova and MPH for also working closely with us and updating in a very timely manner.

We will post a more detailed post mortem as soon as we can on the events that has happened and what we will do moving forward. We thank those who supported us during this difficult time.

For the latest updates you can always join us on Slack (http://invite.zcoin.io:3000) or Twitter (@zcoinofficial).

 



interesting typo causing this issue...

but, the dev seems just replace
                                        if (pubCoinItem.denomination == libzerocoin::ZQ_PEDERSEN && pubCoinItem.id == pubcoinId && pubCoinItem.nHeight != -1) {

etc by

                                        if (pubCoinItem.denomination == libzerocoin::ZQ_WILLIAMSON && pubCoinItem.id == pubcoinId && pubCoinItem.nHeight != -1) {

etc

isn't this will cause problem if you sync from scratch??

the correct way is to do a fork at given block height.

go and actually look at the source commits on the zcoin github.
i'm not sure where you're looking, there are at least 10+ changes
legendary
Activity: 1400
Merit: 1050
new amd kernel: speed bump around +100kh/s https://github.com/djm34/sgminer-msvc2015 (free of charge however donation are welcomed here: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze (btc)
 or here aChWVb8CpgajadpLmiwDZvZaKizQgHxfh5 (zcoin)

worksize = 32 (or lower) at least on the 290x

 
my 290x runs around 450kh/s with worksize = 32 and intensity of 18 (instead of 330kh with old kernel)


(for more recent card, may-be it is possible to use bigger worksize depeding of how much shared memory there is... have only a 290x so it is up to the user to try)
Any new version in project for nVidia cards ?
currently the nvidia cards are doing fine (the point here was to close a little the gap)
legendary
Activity: 1260
Merit: 1046
new amd kernel: speed bump around +100kh/s https://github.com/djm34/sgminer-msvc2015 (free of charge however donation are welcomed here: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze (btc)
 or here aChWVb8CpgajadpLmiwDZvZaKizQgHxfh5 (zcoin)

worksize = 32 (or lower) at least on the 290x

 
my 290x runs around 450kh/s with worksize = 32 and intensity of 18 (instead of 330kh with old kernel)


(for more recent card, may-be it is possible to use bigger worksize depeding of how much shared memory there is... have only a 290x so it is up to the user to try)
Any new version in project for nVidia cards ?
Jump to: