[ANN] Zcoin (XZC) - Implementing ZKP privacy without trusted setup - page 242.

bathrobehero

legendary

Activity: 2002

Merit: 1051

ICO? Not even once.

Quote from: thefix on February 12, 2017, 06:49:19 PM

The wallet is a bit slow, but three days is crazy

   It should take no longer than 1/2 day to a full day depending on your connection speeds

   What O/S are you running the wallet on?

Win7 x64, i7-6800k, SSD, 100 Mbps connection, 15 peers, wallet v0.8.7.5 (v0.2.1).

Quote from: krile on February 12, 2017, 06:49:39 PM

No rigs, ccminer is reporting 250MHs using just one nvidia 1050ti card lol Cheesy

Using linux, compiled from source. Moved the nvidia on another coin now, I wont bother with this weirdness...

A GTX 1070 does 1.3 Mh/s so there's an issue with your miner. Or maybe your card crashed.

franc0

hero member

Activity: 756

Merit: 500

Hire me! Spanish translator and community manager!

Quote from: zcoinofficial on February 09, 2017, 08:52:53 PM

Quote from: franc0 on February 09, 2017, 04:26:10 PM

Quote from: franc0 on February 08, 2017, 11:34:15 PM

no block source available my wallet says. MAc computer.

Help me please, i won't deposit my XZC to my mac wallet until i know what is that "no block source available" thing.

That just means that you aren't connected to any nodes. Are you behind a firewall?

Just little snitch but i'm allowing traffic so that can't be.

joblo

legendary

Activity: 1470

Merit: 1114

Quote from: forzendiablo on February 12, 2017, 09:15:47 PM

Quote from: joblo on February 12, 2017, 09:09:20 PM

Quote from: zcoinofficial on February 12, 2017, 08:45:48 PM

There's a new CPU miner out with some gains. some reporting 10-20% gains on this.

This is third party:

https://github.com/JayDDee/cpuminer-opt

Thanks to JayDDee for releasing this.

You're welcome, it was my pleasure.

windows binary ?

Folllow the link in my sig.

forzendiablo

legendary

Activity: 1526

Merit: 1000

the grandpa of cryptos

Quote from: joblo on February 12, 2017, 09:09:20 PM

Quote from: zcoinofficial on February 12, 2017, 08:45:48 PM

There's a new CPU miner out with some gains. some reporting 10-20% gains on this.

This is third party:

https://github.com/JayDDee/cpuminer-opt

Thanks to JayDDee for releasing this.

You're welcome, it was my pleasure.

windows binary ?

joblo

legendary

Activity: 1470

Merit: 1114

Quote from: zcoinofficial on February 12, 2017, 08:45:48 PM

There's a new CPU miner out with some gains. some reporting 10-20% gains on this.

This is third party:

https://github.com/JayDDee/cpuminer-opt

Thanks to JayDDee for releasing this.

You're welcome, it was my pleasure.

forzendiablo

legendary

Activity: 1526

Merit: 1000

the grandpa of cryptos

are we on GPU block yet?

zcoinofficial

sr. member

Activity: 1004

Merit: 268

Firo (FIRO)

There's a new CPU miner out with some gains. some reporting 10-20% gains on this.

This is third party:

https://github.com/JayDDee/cpuminer-opt

Thanks to JayDDee for releasing this.

rockmoney

sr. member

Activity: 439

Merit: 297

www.amazon.com/shops/MinersSupply

Quote from: linklinklink on February 12, 2017, 03:52:01 PM

Quote from: dntm on February 12, 2017, 02:54:04 PM

Quote from: linklinklink on February 12, 2017, 01:52:21 PM

Can anyone please walk me through the steps to setup the GPU miner with SuprNova?

Suprnova -> help -> getting started.
Same goes for any pool Wink

DNTM

I keep getting the error when I try to run it.

"The program can't start because VCRUNTIME140.dll is missing from your computer. Try reinstalling the program to fix this problem"

After reading several posts regarding missing .dll files, I thought to share some information with anyone who is ever missing any .dll files. First, you can always do a Google search with the name of needed .dll file, & then download it after you've ensured it's legit/virus-free. There is also a website that I often use myself called dll-files.com. I have never had a problem with any of the .dll files I've downloaded from that website, but you should still always scan them first! For the record, I do not have any affiliation to this website..

Website: https://www.dll-files.com/

Quote from: krile on February 12, 2017, 06:04:58 PM

Quote from: bathrobehero on February 11, 2017, 04:23:28 AM

This coin...
None of the reported network hashrates are correct (suprnova, mph, chainz), I can't make heads or tails of the difficulty trying to calculate how long would it take to find a block with my hashrate and at times the wallet syncs slower than the speed of new blocks being found.

This...

250MHs reported by ccminer, not a single share accepted for hours. What is up with the numbers here, nothing is right Cheesy

I was having this same problem (as other have also mentioned). [Assuming you are mining on suprnova's pool] I tried using the various ports ocminer posted for different rigs (see the XZC suprnova main-page for port numbers), & was getting so many different outcomes with crazy results. In the end, the solution was patience - after about an hour of mining on the proper port, it seems everything has made itself stable, & I'm regularly accepting shares with a steady hashrate.

krile

hero member

Activity: 746

Merit: 500

Quote from: bathrobehero on February 12, 2017, 06:39:53 PM

Quote from: krile on February 12, 2017, 06:04:58 PM

Quote from: bathrobehero on February 11, 2017, 04:23:28 AM

This coin...
None of the reported network hashrates are correct (suprnova, mph, chainz), I can't make heads or tails of the difficulty trying to calculate how long would it take to find a block with my hashrate and at times the wallet syncs slower than the speed of new blocks being found.

This...

250MHs reported by ccminer, not a single share accepted for hours. What is up with the numbers here, nothing is right Cheesy

250 Kh/s or 250 Mh/s with multiple rigs?

The default port for suprnova (1596/1569) has a difficulty of 32 which is huge, even for a 6 card rig (1.3 Mh/s per 1070). I'd argue that's way too high even for 10 minute blocktimes but Zcoin periodically have much faster blocks (closer to 1 minute). Blocks being found faster than you can send shares is wasted hash.

And if you use the lower difficulty port 1598 (difficulty 1) vardiff will soon kick the difficulty way up then way down which repeats over and over again.

Just did a test with 7.54 Mh/s and from diff 1 vardiff jumped to 7.5 > 20.83 > 5.68 > 1.16 > 2.27 > 16.28 > 8.88 > 2.22 > 1.28 > 8.64 in 10 minutes or 70 shares. That's way too much fluctuation.

As a completely different note, my wallet is still only at 13545 blocks after a bit over 3 days.

No rigs, ccminer is reporting 250MHs using just one nvidia 1050ti card lol Cheesy

Using linux, compiled from source. Moved the nvidia on another coin now, I wont bother with this weirdness...

Code:

[2017-02-13 00:50:42] 1 miner thread started, using 'lyra2Z' algorithm.
[2017-02-13 00:50:43] Stratum difficulty set to 1 (0.00391)
[2017-02-13 00:50:43] GPU #0: Intensity set to 17, 131072 cuda threads
[2017-02-13 00:50:43] GPU #0: Gigabyte GTX 1050 Ti, 203.24 MH/s
[2017-02-13 00:50:49] Stratum difficulty set to 0.01 (0.00004)
[2017-02-13 00:50:49] lyra2Z block 20837, diff 176.707
[2017-02-13 00:51:08] GPU #0: Gigabyte GTX 1050 Ti, 229.99 MH/s
[2017-02-13 00:51:27] GPU #0: Gigabyte GTX 1050 Ti, 230.10 MH/s
[2017-02-13 00:51:46] GPU #0: Gigabyte GTX 1050 Ti, 230.69 MH/s
[2017-02-13 00:52:05] GPU #0: Gigabyte GTX 1050 Ti, 231.01 MH/s
[2017-02-13 00:52:10] lyra2Z block 20838, diff 188.864

CPU, two threads on i7 report 111485.07 H/s which translates to 0.1 MHs and shares are being accepted regularly by the pool.

I restarted the sync now with fresh wallet.dat, still slow as hell, at block 3000 in 3 hours.

thefix

legendary

Activity: 1049

Merit: 1001

Quote from: bathrobehero on February 12, 2017, 06:39:53 PM

Quote from: krile on February 12, 2017, 06:04:58 PM

Quote from: bathrobehero on February 11, 2017, 04:23:28 AM

This coin...
None of the reported network hashrates are correct (suprnova, mph, chainz), I can't make heads or tails of the difficulty trying to calculate how long would it take to find a block with my hashrate and at times the wallet syncs slower than the speed of new blocks being found.

This...

250MHs reported by ccminer, not a single share accepted for hours. What is up with the numbers here, nothing is right Cheesy

250 Kh/s or 250 Mh/s with multiple rigs?

The default port for suprnova (1596/1569) has a difficulty of 32 which is huge, even for a 6 card rig (1.3 Mh/s per 1070). I'd argue that's way too high even for 10 minute blocktimes but Zcoin periodically have much faster blocks (closer to 1 minute). Blocks being found faster than you can send shares is wasted hash.

And if you use the lower difficulty port 1598 (difficulty 1) vardiff will soon kick the difficulty way up then way down which repeats over and over again.

Just did a test with 7.54 Mh/s and from diff 1 vardiff jumped to 7.5 > 20.83 > 5.68 > 1.16 > 2.27 > 16.28 > 8.88 > 2.22 > 1.28 > 8.64 in 10 minutes or 70 shares. That's way too much fluctuation.

As a completely different note, my wallet is still only at 13545 blocks after a bit over 3 days.

   The wallet is a bit slow, but three days is crazy

   It should take no longer than 1/2 day to a full day depending on your connection speeds

   What O/S are you running the wallet on?

goodminer

member

Activity: 120

Merit: 10

Can someone help me please?
My r7 370 gpu gives me accepted shares, but huge number of hw errors. Is this normal or what??
Can you tell me what is wrong with my bat file?
Here it is:
sgminer -k lyra2z -o stratum+tcp://xzc.suprnova.cc:1596 -u xxx-p xxx -I 18 -w 256 -g 2
Thanx forward.

bathrobehero

legendary

Activity: 2002

Merit: 1051

ICO? Not even once.

Quote from: krile on February 12, 2017, 06:04:58 PM

Quote from: bathrobehero on February 11, 2017, 04:23:28 AM

This coin...
None of the reported network hashrates are correct (suprnova, mph, chainz), I can't make heads or tails of the difficulty trying to calculate how long would it take to find a block with my hashrate and at times the wallet syncs slower than the speed of new blocks being found.

This...

250MHs reported by ccminer, not a single share accepted for hours. What is up with the numbers here, nothing is right Cheesy

250 Kh/s or 250 Mh/s with multiple rigs?

The default port for suprnova (1596/1569) has a difficulty of 32 which is huge, even for a 6 card rig (1.3 Mh/s per 1070). I'd argue that's way too high even for 10 minute blocktimes but Zcoin periodically have much faster blocks (closer to 1 minute). Blocks being found faster than you can send shares is wasted hash.

And if you use the lower difficulty port 1598 (difficulty 1) vardiff will soon kick the difficulty way up then way down which repeats over and over again.

Just did a test with 7.54 Mh/s and from diff 1 vardiff jumped to 7.5 > 20.83 > 5.68 > 1.16 > 2.27 > 16.28 > 8.88 > 2.22 > 1.28 > 8.64 in 10 minutes or 70 shares. That's way too much fluctuation.

As a completely different note, my wallet is still only at 13545 blocks after a bit over 3 days.

krile

hero member

Activity: 746

Merit: 500

Quote from: linklinklink on February 12, 2017, 06:21:17 PM

Quote from: krile on February 12, 2017, 06:04:58 PM

Quote from: bathrobehero on February 11, 2017, 04:23:28 AM

This coin...
None of the reported network hashrates are correct (suprnova, mph, chainz), I can't make heads or tails of the difficulty trying to calculate how long would it take to find a block with my hashrate and at times the wallet syncs slower than the speed of new blocks being found.

This...

250MHs reported by ccminer, not a single share accepted for hours. What is up with the numbers here, nothing is right Cheesy

I'm having the same problem, running 1,200khs and the website isn't registering my work on SuprNova

This is all so sketchy. Reminds me of the weird zcash launch phenomenon, just here it happened at block 20500. And I just realized it also has a founders reward. Where is the zcoin classic fork?? Cheesy

linklinklink

member

Activity: 68

Merit: 10

Quote from: krile on February 12, 2017, 06:04:58 PM

Quote from: bathrobehero on February 11, 2017, 04:23:28 AM

This coin...
None of the reported network hashrates are correct (suprnova, mph, chainz), I can't make heads or tails of the difficulty trying to calculate how long would it take to find a block with my hashrate and at times the wallet syncs slower than the speed of new blocks being found.

This...

250MHs reported by ccminer, not a single share accepted for hours. What is up with the numbers here, nothing is right Cheesy

I'm having the same problem, running 1,200khs and the website isn't registering my work on SuprNova

linklinklink

member

Activity: 68

Merit: 10

Quote from: dntm on February 12, 2017, 04:24:48 PM

Quote from: linklinklink on February 12, 2017, 03:52:01 PM

Quote from: dntm on February 12, 2017, 02:54:04 PM

Quote from: linklinklink on February 12, 2017, 01:52:21 PM

Can anyone please walk me through the steps to setup the GPU miner with SuprNova?

Suprnova -> help -> getting started.
Same goes for any pool Wink

DNTM

I keep getting the error when I try to run it.

"The program can't start because VCRUNTIME140.dll is missing from your computer. Try reinstalling the program to fix this problem"

You should update your computer to fix most .dll's, or a faster method is to search another windows computer for the .dll file and paste it into the folder of your miner.
Alternatively, if you trust me, here is the file - again, just paste it in the folder.

DNTM

Thanks, copied the file over from Windows. Working great.

krile

hero member

Activity: 746

Merit: 500

Quote from: bathrobehero on February 11, 2017, 04:23:28 AM

This coin...
None of the reported network hashrates are correct (suprnova, mph, chainz), I can't make heads or tails of the difficulty trying to calculate how long would it take to find a block with my hashrate and at times the wallet syncs slower than the speed of new blocks being found.

This...

250MHs reported by ccminer, not a single share accepted for hours. What is up with the numbers here, nothing is right Cheesy

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: linklinklink on February 12, 2017, 03:52:01 PM

Quote from: dntm on February 12, 2017, 02:54:04 PM

Quote from: linklinklink on February 12, 2017, 01:52:21 PM

Can anyone please walk me through the steps to setup the GPU miner with SuprNova?

Suprnova -> help -> getting started.
Same goes for any pool Wink

DNTM

I keep getting the error when I try to run it.

"The program can't start because VCRUNTIME140.dll is missing from your computer. Try reinstalling the program to fix this problem"

Had the same thing, just install vcredist 2015 update from microsoft.
https://www.microsoft.com/en-US/download/details.aspx?id=48145

Golku

full member

Activity: 263

Merit: 100

Quote from: linklinklink on February 12, 2017, 03:52:01 PM

Quote from: dntm on February 12, 2017, 02:54:04 PM

Quote from: linklinklink on February 12, 2017, 01:52:21 PM

Can anyone please walk me through the steps to setup the GPU miner with SuprNova?

Suprnova -> help -> getting started.
Same goes for any pool Wink

DNTM

I keep getting the error when I try to run it.

"The program can't start because VCRUNTIME140.dll is missing from your computer. Try reinstalling the program to fix this problem"

I got the same problem. Hope it will fixed soon

dntm

newbie

Activity: 7

Merit: 0

Quote from: linklinklink on February 12, 2017, 03:52:01 PM

Quote from: dntm on February 12, 2017, 02:54:04 PM

Quote from: linklinklink on February 12, 2017, 01:52:21 PM

Can anyone please walk me through the steps to setup the GPU miner with SuprNova?

Suprnova -> help -> getting started.
Same goes for any pool Wink

DNTM

I keep getting the error when I try to run it.

"The program can't start because VCRUNTIME140.dll is missing from your computer. Try reinstalling the program to fix this problem"

You should update your computer to fix most .dll's, or a faster method is to search another windows computer for the .dll file and paste it into the folder of your miner.
Alternatively, if you trust me, here is the file - again, just paste it in the folder.

DNTM

linklinklink

member

Activity: 68

Merit: 10

Quote from: dntm on February 12, 2017, 02:54:04 PM

Quote from: linklinklink on February 12, 2017, 01:52:21 PM

Can anyone please walk me through the steps to setup the GPU miner with SuprNova?

Suprnova -> help -> getting started.
Same goes for any pool Wink

DNTM

I keep getting the error when I try to run it.

"The program can't start because VCRUNTIME140.dll is missing from your computer. Try reinstalling the program to fix this problem"

Topic: [ANN] Zcoin (XZC) - Implementing ZKP privacy without trusted setup - page 242. (Read 663504 times)