Topic: [ANN] ZERO - fork of Zcash with harder mining params - page 14. (Read 131859 times)
It is not only the SSL, website is down!
What happens?
I am trying to mine zero with three GTX1070 gpus using optiminer zero 1.2, on Windows.
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:
[2017-11-21 11:13:54.345] [info] [GPU1] 4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0] 4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2] 4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total] 15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.
I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.
Any ideas? I mean, besides switching to ethos?
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:
[2017-11-21 11:13:54.345] [info] [GPU1] 4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0] 4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2] 4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total] 15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.
I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.
Any ideas? I mean, besides switching to ethos?
Any chance to run out of memory? RAM or GPU? The ram at least you can monitor.. I think i have the ram problem on linux too..
What cards do you run in your rigs? Nvidia or AMD? I think that the problem relates to the Nvidia cards/drivers, since the miner that runs the AMD cards has no problems.
Just went through this on Linux rig. After trying everything including swapping hardware and a couple of clean installs, it turned out that driver 384.98 fixes a couple of bugs. In my case it was the way the card interfaces with the CPU. Run 384.98 and see what happens
I am with 384.98 and having almost same problems...
Just went through this on Linux rig. After trying everything including swapping hardware and a couple of clean installs, it turned out that driver 384.98 fixes a couple of bugs. In my case it was the way the card interfaces with the CPU. Run 384.98 and see what happens
I run Optiminer for Windows and driver 388.31. There is no driver 394.98 for Windows, the closest ones to the version you mentioned are 384.94, 385.12 and 385.28.
I will give them a try.
Funny thing, I realized thanks to your post is that two of the nvidia cards were running driver 384.38 and the third one the latest driver 388.31. Now I 've updated them all and will do some tests, thanks for the suggestion.
I am trying to mine zero with three GTX1070 gpus using optiminer zero 1.2, on Windows.
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:
[2017-11-21 11:13:54.345] [info] [GPU1] 4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0] 4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2] 4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total] 15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.
I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.
Any ideas? I mean, besides switching to ethos?
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:
[2017-11-21 11:13:54.345] [info] [GPU1] 4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0] 4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2] 4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total] 15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.
I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.
Any ideas? I mean, besides switching to ethos?
Any chance to run out of memory? RAM or GPU? The ram at least you can monitor.. I think i have the ram problem on linux too..
What cards do you run in your rigs? Nvidia or AMD? I think that the problem relates to the Nvidia cards/drivers, since the miner that runs the AMD cards has no problems.
Just went through this on Linux rig. After trying everything including swapping hardware and a couple of clean installs, it turned out that driver 384.98 fixes a couple of bugs. In my case it was the way the card interfaces with the CPU. Run 384.98 and see what happens
Whoever is trying right now to use ZCASH mining software inside zero.forgetop.com - please download the proper software from this page:
Optiminers Equihash and Zero
Thank You
Optiminers Equihash and Zero
Thank You
I am trying to mine zero with three GTX1070 gpus using optiminer zero 1.2, on Windows.
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:
[2017-11-21 11:13:54.345] [info] [GPU1] 4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0] 4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2] 4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total] 15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.
I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.
Any ideas? I mean, besides switching to ethos?
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:
[2017-11-21 11:13:54.345] [info] [GPU1] 4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0] 4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2] 4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total] 15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.
I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.
Any ideas? I mean, besides switching to ethos?
Any chance to run out of memory? RAM or GPU? The ram at least you can monitor.. I think i have the ram problem on linux too..
What cards do you run in your rigs? Nvidia or AMD? I think that the problem relates to the Nvidia cards/drivers, since the miner that runs the AMD cards has no problems.
Both are NVIDIA , one of them run just fine the other one is as you like to say - malaka
I am trying to mine zero with three GTX1070 gpus using optiminer zero 1.2, on Windows.
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:
[2017-11-21 11:13:54.345] [info] [GPU1] 4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0] 4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2] 4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total] 15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.
I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.
Any ideas? I mean, besides switching to ethos?
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:
[2017-11-21 11:13:54.345] [info] [GPU1] 4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0] 4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2] 4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total] 15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.
I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.
Any ideas? I mean, besides switching to ethos?
Any chance to run out of memory? RAM or GPU? The ram at least you can monitor.. I think i have the ram problem on linux too..
What cards do you run in your rigs? Nvidia or AMD? I think that the problem relates to the Nvidia cards/drivers, since the miner that runs the AMD cards has no problems.
I'd like to mine this coin, but I can't see to figure out what's going on with the Windows wallet. Does anyone have a status update on a Windows wallet? How soon will we have a windows wallet for easy download?
I understand the necessity of a Windows Wallet and this will be done very soon
There is one you can use in Linux though if you can work with Linux?
We can't give a specific date currently and even if there was a specific date i don't think we should reveal it.
Since a Windows wallet would affect greatly the price (and people would try to profit from the increase in price) we wish to avoid any speculation
It is better to come as a surprise, one day you will wake up and there will be a fully working Windows wallet
Is there a way to run a Linux wallet on my Windows PC? Sorry for the noob question, but if it's possible, I'm all for it.
hi folks,
it is not a problem, install virtualbox
then download ubuntu as an image
paste ubuntu into virtualbox and install
then you can install the linux wallet as usual
the best thing is, you can then export the entire linux installation with your wallet and save it on usb stick as a backup
virtualbox offers the function to export and import the complete installation with all installed programs
and you already have a backup
If you change your computer, just reinstall your exported virtualbox linux system
best regards
minerentry
happy mining
I'd like to mine this coin, but I can't see to figure out what's going on with the Windows wallet. Does anyone have a status update on a Windows wallet? How soon will we have a windows wallet for easy download?
I understand the necessity of a Windows Wallet and this will be done very soon
There is one you can use in Linux though if you can work with Linux?
We can't give a specific date currently and even if there was a specific date i don't think we should reveal it.
Since a Windows wallet would affect greatly the price (and people would try to profit from the increase in price) we wish to avoid any speculation
It is better to come as a surprise, one day you will wake up and there will be a fully working Windows wallet
Is there a way to run a Linux wallet on my Windows PC? Sorry for the noob question, but if it's possible, I'm all for it.
Hi all, following the project,
can help a little with graphics and ideas,
The slack link seems obsolete, and might be great to redesign the thread soon,
here is a few ideas i have been playing with for branding / Zero visuals... (QR Code should redirect to this bitcointalk thread)
Drop me a PM if you need anything,
https://image.ibb.co/nHrboR/1.png
https://image.ibb.co/f4yNTR/2.png
https://image.ibb.co/mHeU8R/3.png
https://image.ibb.co/cAf2TR/4.png
can help a little with graphics and ideas,
The slack link seems obsolete, and might be great to redesign the thread soon,
here is a few ideas i have been playing with for branding / Zero visuals... (QR Code should redirect to this bitcointalk thread)
Drop me a PM if you need anything,
https://image.ibb.co/nHrboR/1.png
https://image.ibb.co/f4yNTR/2.png
https://image.ibb.co/mHeU8R/3.png
https://image.ibb.co/cAf2TR/4.png
Hi renk,
your idea is great and really cool.
I like the fourth graphic very much
simple and serious.
best regards
minerentry
zero pool: http://minerentry.com
We already have Estimated earnings calculation
Here we go, come miners and let's start forging coins together!
Here we go, come miners and let's start forging coins together!
ALL NEW ZERO POOL
very pleased to announce http://zero.mining4.co.uk is now live with EU and US stratum.
using the correct equihash 192/7 parameters
fast, efficient mining engine
PPLNT payout system, only 0.25% fee
come join us
very pleased to announce http://zero.mining4.co.uk is now live with EU and US stratum.
using the correct equihash 192/7 parameters
fast, efficient mining engine
PPLNT payout system, only 0.25% fee
come join us
dont forget to spread some of that love our way
we got around 28 blocks yesterday alone.... with only avg 200sols 
low fee 0.25%, what u mining4?
I go in...
Welcome
let the blocks rain How to make to send me more coins on one transaction. How to rise it to 100-200 for example?
I am trying to mine zero with three GTX1070 gpus using optiminer zero 1.2, on Windows.
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:
[2017-11-21 11:13:54.345] [info] [GPU1] 4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0] 4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2] 4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total] 15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.
I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.
Any ideas? I mean, besides switching to ethos?
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:
[2017-11-21 11:13:54.345] [info] [GPU1] 4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0] 4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2] 4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total] 15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.
I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.
Any ideas? I mean, besides switching to ethos?
Any chance to run out of memory? RAM or GPU? The ram at least you can monitor.. I think i have the ram problem on linux too..
Don't think that ethos works like a charm
Compare the graphs:
http://zero.forgetop.com/address?t=t1RinhfQ2Ni7U6GQiK4P6be5RLRW5vPCZo2
Both rigs work on ethos. The bigger one create me so much troubles that you can't imagine (as is visible on the graph).
The other one may work months on zero, no problem at all. I don't have any explanation about the differences then the number of cards. After working for 5 hours the rig runs out of memory and I can't even open a ssh connection, so I had to set it up on auto reboot for each 4 hrs...
I am trying to mine zero with three GTX1070 gpus using optiminer zero 1.2, on Windows.
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:
[2017-11-21 11:13:54.345] [info] [GPU1] 4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0] 4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2] 4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total] 15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.
I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.
Any ideas? I mean, besides switching to ethos?
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:
[2017-11-21 11:13:54.345] [info] [GPU1] 4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0] 4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2] 4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total] 15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.
I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.
Any ideas? I mean, besides switching to ethos?
I'd like to mine this coin, but I can't see to figure out what's going on with the Windows wallet. Does anyone have a status update on a Windows wallet? How soon will we have a windows wallet for easy download?
I understand the necessity of a Windows Wallet and this will be done very soon
There is one you can use in Linux though if you can work with Linux?
We can't give a specific date currently and even if there was a specific date i don't think we should reveal it.
Since a Windows wallet would affect greatly the price (and people would try to profit from the increase in price) we wish to avoid any speculation
It is better to come as a surprise, one day you will wake up and there will be a fully working Windows wallet
Is there any way to communicate with all the team members together ? If someone can send me a slack invite please ?
I'd like to get in touch with the devs and team members so that we can move on all together, marketing, developement...
Please PM or contact me on twitter @RenkBTC
thanks
I'd like to get in touch with the devs and team members so that we can move on all together, marketing, developement...
Please PM or contact me on twitter @RenkBTC
thanks
Hi my friend, Tearo can send you an invite but he is travelling at the moment
Please give him some time and he will revert
Is there any way to communicate with all the team members together ? If someone can send me a slack invite please ?
I'd like to get in touch with the devs and team members so that we can move on all together, marketing, developement...
Please PM or contact me on twitter @RenkBTC
thanks
I'd like to get in touch with the devs and team members so that we can move on all together, marketing, developement...
Please PM or contact me on twitter @RenkBTC
thanks
CPU computing power and computing power vary greatly?
BTC
zero.forgetop.com is waiting for you Dear miners!
And remember - the best profit not always come necessarily with big pools. Most of the time having a big share cut is a lot more profitable than that.
The only way to find out is to give it a try!
Start your engine miners!
GOOD LUCK
zero.forgetop.com is waiting for you Dear miners!
And remember - the best profit not always come necessarily with big pools. Most of the time having a big share cut is a lot more profitable than that.
The only way to find out is to give it a try!
Start your engine miners!
GOOD LUCK
Lutsifer,
I've been mining on your pool for about 24 hrs. and I have a little feed back.
1. I've noticed that the individual miner stats page seems to have a little trouble reporting my workers. It keeps cycling between my workers and the other miners with multiple rigs running. Specifically I keep seeing workers minko & ginko, then rig1 & rig2 (mine are also rig1 & rig 2, but the sol/s don't match) and then my rigs.
2. I would like to see a way to change the payout rate in order to minimize transaction fee cost. I'd prefer getting my coins say once a day rather than on every block.
Thanks for the pool. So far I'm making more coins than I was on supernova.
#1 has been cleared out!
Thank you again!
Jump to: