i heard some rumors that the issues are almost fixed...
Now I heard them too!
Topic: [ANN][AERO] Aero | 100% PoS | AeroME | Anonymous Sending - page 63. (Read 420739 times)
Now I heard them too!
i heard some rumors that the issues are almost fixed...
Majika is doing some awesome work in IRC, you should join if you wanna see some real developing action 
I resysnced my mac wallet yesterday and all the previous bad/orphan transactions I had disappeared and my coins were returned to my balance.
I believe I'm on the main chain now as it's keeping in sync with the top block on the block explorer.
As I mentioned earlier, I've had no luck getting a new install of the new windows wallet to fully sync the block chain.
I restored my previous wallet and perform a "-rescan". It's working and staking.
I'm also in sync with the block explorer.
Is it good ?
Yes its a promising sign however i cannot guarantee this 100% just at this moment so please hold from sending and Aero.. It was a pain in the butt retrieving the lost transactions we managed thus far so please hang on a little longer and we should be good to go.
Update will follow shortly.
Thanks,
Majika
quick update,
We have finally identified (and confirmed) the correct blockchain, we have linked up node 3 and the Block Explore to the correct chain, we are moving the other nodes code base over to the same as node 3 and the BE.
This should be done in the next few hours.
We have reinstated the features and will be available in this next release.
It should be noted that the OSX wallets are running on an out-dated trunk of the Aero code base. We will resolve this shortly with the correct repository and will make a fresh build once we have the exchanges back up and the windows wallet ready, tested and out.
Thanks you for continued support and patience,
Majika.
P.S.
I would appreciate it if you continue to withhold from making transactions as I cannot yet guarantee the validity of the network 100% and as such, if they will turn up at their destination addresses/accounts.
We have finally identified (and confirmed) the correct blockchain, we have linked up node 3 and the Block Explore to the correct chain, we are moving the other nodes code base over to the same as node 3 and the BE.
This should be done in the next few hours.
We have reinstated the features and will be available in this next release.
It should be noted that the OSX wallets are running on an out-dated trunk of the Aero code base. We will resolve this shortly with the correct repository and will make a fresh build once we have the exchanges back up and the windows wallet ready, tested and out.
Thanks you for continued support and patience,
Majika.
P.S.
I would appreciate it if you continue to withhold from making transactions as I cannot yet guarantee the validity of the network 100% and as such, if they will turn up at their destination addresses/accounts.
Just got back a good amount of coins, got my wallet restored thanks to Majika, awesome help. I'm quite impressed of his abilities, not that I've expected something else. Most promising project I've been involved it.
If our wallet (osx) is fine and staking. Do we need to update?
There is no new mac wallet to upgrade to.
Majika - are the forks in the network the result of an attack or an error?
I resysnced my mac wallet yesterday and all the previous bad/orphan transactions I had disappeared and my coins were returned to my balance.
I believe I'm on the main chain now as it's keeping in sync with the top block on the block explorer.
As I mentioned earlier, I've had no luck getting a new install of the new windows wallet to fully sync the block chain.
If our wallet (osx) is fine and staking. Do we need to update?
Aero Community,
Before I begin I would just like to emphasize one again, I am trying every conceivable option which is available to us to help get Aero back up and running.
Furthermore, I am doing my best to reduce any fallout caused but our fixes, by fallout i mean *potential* lost coins on the blockchain.
Once again, I am calling for a little more of the Aero community's time to help determine, from your own perspectives the following information:
I would like to know from users how have transactions which have not turned up to clarify their stuck transactions:
1) The TXID,
2) Search for the TXID on the explorer, if it is there, then that means you are on the same chain as the Block Explorer. If the TXID is not there then you are on a different chain
3) check the block height matches the Explorer
but one thing we do know for sure is that the Explorer and Seed nodes are not on the same chain which make things really difficult to diagnose...
So the majority of the community who are on the correct chain would identify the correct chain which we can code our fix for.
We made the assumption to use information from the Seednodes in the last wallet update because of the amount of wallet that were connected to is and fully in sync..
Now we are trying a different method. All this is aimed at reducing the chances of users loosing coins.
Again, I thank you for your continued patience and support,
Majika.
P.S. Paste your TX here or PM me in IRC (for privacy).. Make a shared google doc and paste in there or whatever.. so long as its available for cross reference by myself.
Before I begin I would just like to emphasize one again, I am trying every conceivable option which is available to us to help get Aero back up and running.
Furthermore, I am doing my best to reduce any fallout caused but our fixes, by fallout i mean *potential* lost coins on the blockchain.
Once again, I am calling for a little more of the Aero community's time to help determine, from your own perspectives the following information:
I would like to know from users how have transactions which have not turned up to clarify their stuck transactions:
1) The TXID,
2) Search for the TXID on the explorer, if it is there, then that means you are on the same chain as the Block Explorer. If the TXID is not there then you are on a different chain
3) check the block height matches the Explorer
So the majority of the community who are on the correct chain would identify the correct chain which we can code our fix for.
We made the assumption to use information from the Seednodes in the last wallet update because of the amount of wallet that were connected to is and fully in sync..
Now we are trying a different method. All this is aimed at reducing the chances of users loosing coins.
Again, I thank you for your continued patience and support,
Majika.
P.S. Paste your TX here or PM me in IRC (for privacy).. Make a shared google doc and paste in there or whatever.. so long as its available for cross reference by myself.
ok we are busy as always hold tight for more informed update..
Please also Stop and transactions.
Thanks you,
Majika
Please also Stop and transactions.
Thanks you,
Majika
This is why I bought into Aero, held all my Aero and wont sell either.
Top dev, working on a quick fix to the issue.
Top guy
ok we are busy as always hold tight for more informed update..
Please also Stop and transactions.
Thanks you,
Majika
Please also Stop and transactions.
Thanks you,
Majika
Update,
This is a Mandatory upgrade to the Aero Wallet,
Just to make it clear you should install the new Aero wallet (Aero-QT Win-Fix https://mega.co.nz/#!VoMAwBTS!TiQLAdo2YoqnPG4MDDy71gJfaXkPY3mmFmVEPYIDNfQ)
You must shut down your old wallet.
Also please delete the old wallet (keep wallet.dat).
Download and install the new wallet.
Then finally Resync your new wallet.
This is how we fix the situation in the fastest possible way!
Thank you,
Majika
This is a Mandatory upgrade to the Aero Wallet,
Just to make it clear you should install the new Aero wallet (Aero-QT Win-Fix https://mega.co.nz/#!VoMAwBTS!TiQLAdo2YoqnPG4MDDy71gJfaXkPY3mmFmVEPYIDNfQ)
You must shut down your old wallet.
Also please delete the old wallet (keep wallet.dat).
Download and install the new wallet.
Then finally Resync your new wallet.
This is how we fix the situation in the fastest possible way!
Thank you,
Majika
Idol, that's exactly what I've done.
So, first I didn't have any problem.
Then, I saw this post saying that it is a mandatory update.
So, I did exactly what is mentionned there and it doesn't work.
Don't worry. What you've described is to be expected. The old blockchain gotta die before your wallet can sync correctly.
Update,
This is a Mandatory upgrade to the Aero Wallet,
Just to make it clear you should install the new Aero wallet (Aero-QT Win-Fix https://mega.co.nz/#!VoMAwBTS!TiQLAdo2YoqnPG4MDDy71gJfaXkPY3mmFmVEPYIDNfQ)
You must shut down your old wallet.
Also please delete the old wallet (keep wallet.dat).
Download and install the new wallet.
Then finally Resync your new wallet.
This is how we fix the situation in the fastest possible way!
Thank you,
Majika
This is a Mandatory upgrade to the Aero Wallet,
Just to make it clear you should install the new Aero wallet (Aero-QT Win-Fix https://mega.co.nz/#!VoMAwBTS!TiQLAdo2YoqnPG4MDDy71gJfaXkPY3mmFmVEPYIDNfQ)
You must shut down your old wallet.
Also please delete the old wallet (keep wallet.dat).
Download and install the new wallet.
Then finally Resync your new wallet.
This is how we fix the situation in the fastest possible way!
Thank you,
Majika
guys why dont you just follow the instruction on the update?
dont go crying to the dve after you lose your coins
also lock your wallet until we get the problem fixed
dont go crying to the dve after you lose your coins
also lock your wallet until we get the problem fixed
Ive updated, done the conf file and im out of sync by a block.
Been like it all night.
Any suggestions guys?
Been like it all night.
Any suggestions guys?
The new Windows wallet doesn't work.
It won't go past block 113559. The status bar at the bottom of mine sometime reports 1 block behind and sometimes like 300 or 400.
I've deleted the whole thing and reinstalled a couple of times and it just keeps doing the same thing.
The current block is actualy 114530 per http://aero.blockexplorer.cc/chain/AeroCoin
I think we have to wait for another update from the dev.
Yea that's right. Ok thanks for the info.
I will just wait for the new wallet
Ive updated, done the conf file and im out of sync by a block.
Been like it all night.
Any suggestions guys?
Been like it all night.
Any suggestions guys?
The new Windows wallet doesn't work.
It won't go past block 113559. The status bar at the bottom of mine sometimes reports 1 block behind and sometimes like 300 or 400.
I've deleted the whole thing and reinstalled a couple of times and it just keeps doing the same thing.
The current block is actualy 114530 per http://aero.blockexplorer.cc/chain/AeroCoin
I think we have to wait for another update from the dev.
Ive updated, done the conf file and im out of sync by a block.
Been like it all night.
Any suggestions guys?
Been like it all night.
Any suggestions guys?
Any peer list to add to the conf file?
yes its in the op.. Example Aero.conf
rpcuser=aerouser
rpcpassword=aeropassword
rpcport=27715
port=27716
addnode=104.131.254.166
addnode=178.62.48.249
addnode=128.199.136.122
We are continuing our efforts with this issue and your continued patience is appreciated,
Majika
can you do a mac walkthrough as well?
hmmm... mine doesn't like it, running v2.1.0.0: Experimental, I will delete everything and try again...
Any peer list to add to the conf file?
yes its in the op.. Example Aero.conf
rpcuser=aerouser
rpcpassword=aeropassword
rpcport=27715
port=27716
addnode=104.131.254.166
addnode=178.62.48.249
addnode=128.199.136.122
We are continuing our efforts with this issue and your continued patience is appreciated,
Majika
Just for the record, i have been staking with the original wallet 24/7 for months with zero issues
Yes same here, but.. problem was not when staking, it was when making transactions.
So...Mr. nFox, are you saying i might have a problem moving all those coins in the future?
Im certainly not against updating to the new wallet (planned on that for the last few weeks anyway) but simply have not gotten around to do it yet.
Jump to: