[ANN][AMS] AmsterdamCoin™ | 100% PoS, Masternodes, Obfuscation, Seesaw - page 62.

startsts

sr. member

Activity: 1092

Merit: 273

Quote from: SpAcEDeViL on January 29, 2018, 05:21:54 AM

Hy,

again.... every day a chain split... nice.... very nice....

my pool is 10 blocks forward... but dont know how long... so... i know... my longest chain lost again...

so what say the miners? resync?

I decided to delist AMS from cryptohub. there will be no working exchange anymore

Koumonte

newbie

Activity: 17

Merit: 0

My Windows wallet is at 237585
My Linux wallet/masternode at 233012 after deleting all files and -reindex
http://www.amsterdamblockchain.info/ shows 237452.
So my wallet is on the real blockchain since it has highest number of blocks Cheesy

SpAcEDeViL

legendary

Activity: 986

Merit: 1027

Miner-Control.de Pooler

Hy,

again.... every day a chain split... nice.... very nice....

my pool is 10 blocks forward... but dont know how long... so... i know... my longest chain lost again...

so what say the miners? resync?

SpAcEDeViL

legendary

Activity: 986

Merit: 1027

Miner-Control.de Pooler

Hy,

again Chainsplit? Or only the reload wrong? last block on blockexplorer have 894 confirms

https://www.amsterdamblockchain.info/tx/ae0023e88b1f52c087c8d1dffbb9576ac7630e1645227842f77e2c340a792447
And i found it in my explorer: https://miner-control.de/explorer/AMS?txid=ae0023e88b1f52c087c8d1dffbb9576ac7630e1645227842f77e2c340a792447

Blockexplorer is on height: 236545. Last Block from 28.01.18 18:19h with 48 connections

My Pool is on height: 237435 Last block, last min. with 71 connections.

ronshappy

newbie

Activity: 10

Merit: 0

Quote from: Dima05 on January 28, 2018, 08:59:40 AM

Quote from: rumour93 on January 27, 2018, 05:12:55 PM

Quote from: SpAcEDeViL on January 27, 2018, 02:49:07 PM

Quote from: rumour93 on January 27, 2018, 01:44:06 PM

Is there a bootstrap available; can't seem to get synced on the correct chain. Usually stuck in the 23k'ish block section and have started over several times.

Added the nodes in the conf file as mentioned a few posts up. Any other tricks I can perform?

Hy,

Look at https://miner-control.de in Blockexplorer, there is a peerlist.
Copy that to your conf, plus „listen=0“. Stop node, delete all files in walletfolder, except the wallet.dat.
Start ams new to resync. After that, you are on the right chain. After that, you can stop wallet, remove „listen“ in conf and restart wallet.

Tried your suggestion but ended up at the same block. Picked one node that was on the right chain and re-did the sync with the listen=0 and only 1 node in the conf file.

Got back on the right chain; thanks!

how did you come about?
give advice, I can not do!

The instructions are correct --here is the step by step.
1. Open your Amsterdam wallet ver 4.1.0
2. click on Tools -> "Peers" - wait for the peers to show up.
3. then click on the "address/hostname" go through the list - look in right pane for "Starting height, sync height"
4. Compare this with the current block in http://www.amsterdamblockchain.info/ - write down the address that shows the correct block.
5. Close the Amsterdam wallet.
6. now go to the folder C:\Users\(user name)\AppData\Roaming\AmsterdamCoin -- this is for windows 10 -- this works for both linux and windows, file path is just different
7. Confirm this is the correct folder - you should see "Chainstate, Blocks, Amsterdam.conf"
8. Delete all files and folders making sure you do not touch **** Wallet.dat / Amsterdam.conf / masternode.conf - same for linux
9. Make a copy of the amsterdam.conf - edit the orginal file
9. Now edit the amsterdam.conf file to addnode=(the IP address you wrote down with :50020)
10. change listen=0 - save file
11. Run the Amsterdamn wallet, wait for it to completely sync, close wallet, delete amsterdam.conf and rename copied version to amsterdam.conf

And please don't use giga hash mining on AMS - the difficulty is too low and the chain breaks. Look at total network hash before blasting it.

Dima05

newbie

Activity: 82

Merit: 0

Quote from: rumour93 on January 27, 2018, 05:12:55 PM

Quote from: SpAcEDeViL on January 27, 2018, 02:49:07 PM

Quote from: rumour93 on January 27, 2018, 01:44:06 PM

Is there a bootstrap available; can't seem to get synced on the correct chain. Usually stuck in the 23k'ish block section and have started over several times.

Added the nodes in the conf file as mentioned a few posts up. Any other tricks I can perform?

Hy,

Look at https://miner-control.de in Blockexplorer, there is a peerlist.
Copy that to your conf, plus „listen=0“. Stop node, delete all files in walletfolder, except the wallet.dat.
Start ams new to resync. After that, you are on the right chain. After that, you can stop wallet, remove „listen“ in conf and restart wallet.

Tried your suggestion but ended up at the same block. Picked one node that was on the right chain and re-did the sync with the listen=0 and only 1 node in the conf file.

Got back on the right chain; thanks!

how did you come about?
give advice, I can not do!

rumour93

newbie

Activity: 27

Merit: 0

Quote from: SpAcEDeViL on January 27, 2018, 02:49:07 PM

Quote from: rumour93 on January 27, 2018, 01:44:06 PM

Is there a bootstrap available; can't seem to get synced on the correct chain. Usually stuck in the 23k'ish block section and have started over several times.

Added the nodes in the conf file as mentioned a few posts up. Any other tricks I can perform?

Hy,

Look at https://miner-control.de in Blockexplorer, there is a peerlist.
Copy that to your conf, plus „listen=0“. Stop node, delete all files in walletfolder, except the wallet.dat.
Start ams new to resync. After that, you are on the right chain. After that, you can stop wallet, remove „listen“ in conf and restart wallet.

Tried your suggestion but ended up at the same block. Picked one node that was on the right chain and re-did the sync with the listen=0 and only 1 node in the conf file.

Got back on the right chain; thanks!

SpAcEDeViL

legendary

Activity: 986

Merit: 1027

Miner-Control.de Pooler

Quote from: rumour93 on January 27, 2018, 01:44:06 PM

Is there a bootstrap available; can't seem to get synced on the correct chain. Usually stuck in the 23k'ish block section and have started over several times.

Added the nodes in the conf file as mentioned a few posts up. Any other tricks I can perform?

Hy,

Look at https://miner-control.de in Blockexplorer, there is a peerlist.
Copy that to your conf, plus „listen=0“. Stop node, delete all files in walletfolder, except the wallet.dat.
Start ams new to resync. After that, you are on the right chain. After that, you can stop wallet, remove „listen“ in conf and restart wallet.

rumour93

newbie

Activity: 27

Merit: 0

Quote from: greenhope on January 27, 2018, 02:03:34 PM

Quote from: rumour93 on January 27, 2018, 01:44:06 PM

Is there a bootstrap available; can't seem to get synced on the correct chain. Usually stuck in the 23k'ish block section and have started over several times.

Added the nodes in the conf file as mentioned a few posts up. Any other tricks I can perform?

Backup your wallet.dat.
Delete all files except wallet.dat in Amsterdamcoin folder.
Restart your wallet.

Tried that 4 times now and every time I'm stuck in block 233006 in the end... Is there a way to connect only to good nodes and ban the ones that are not on the correct chain?

greenhope

full member

Activity: 446

Merit: 105

Quote from: rumour93 on January 27, 2018, 01:44:06 PM

Is there a bootstrap available; can't seem to get synced on the correct chain. Usually stuck in the 23k'ish block section and have started over several times.

Added the nodes in the conf file as mentioned a few posts up. Any other tricks I can perform?

Backup your wallet.dat.
Delete all files except wallet.dat in Amsterdamcoin folder.
Restart your wallet.

rumour93

newbie

Activity: 27

Merit: 0

Is there a bootstrap available; can't seem to get synced on the correct chain. Usually stuck in the 23k'ish block section and have started over several times.

Added the nodes in the conf file as mentioned a few posts up. Any other tricks I can perform?

madmack1

member

Activity: 157

Merit: 11

Quote from: SpAcEDeViL on January 27, 2018, 03:35:04 AM

Resync with nodes from Block Explorer....
Pool is now on same height...

I Hope, when POS phase begin, and many clients post in fast time new blocks, the chain dont splits to fast.
Actuelly i thinks, the splits comes extremer

I thought dev said chain splits would stop at POS phase?
can any protection be added during pre POS?

SpAcEDeViL

legendary

Activity: 986

Merit: 1027

Miner-Control.de Pooler

Resync with nodes from Block Explorer....
Pool is now on same height...

I Hope, when POS phase begin, and many clients post in fast time new blocks, the chain dont splits to fast.
Actuelly i thinks, the splits comes extremer

SpAcEDeViL

legendary

Activity: 986

Merit: 1027

Miner-Control.de Pooler

resync finish, but the pool wallet goes again in the longest chain.

So we have a chain Split again!!!!!!!

Explorer Chain height 234017
Pool chain height 234038

So, dev? What now? Resync ? Or make the Explorer a Resync??

simbapapa

newbie

Activity: 7

Merit: 0

Quote from: polishfarmer on January 26, 2018, 03:15:59 PM

Hi, i withdrew my ams from coinexchange a day ago and it still hasnt shown up in my windows desktop client. does anyone know why? the exchange completed the transaction. But the txid and wallet address show nothing in the block explorer.

is this because of split chains? is there a solution to this problem?

I got my coins in my wallet on the exact TXID like 8 days after I sent it to my wallet. Supposed to be instant, but wasn't my case. Similar to yours I suppose.

Had filed a ticket with coinexchange when it first happened. Coinexchange took some time to respond, was sent on the same TXID. It is now safe in my wallet. I can finally see the TXID on the blockchain explorer for amsterdam coin.

I suspect there is something coinexchange is doing that is causing the problem. I hope they work with the dev to figure it out. I asked for free coin from amsterdamcoin.com to send and test my wallet, it arrived like almost instantly.

SpAcEDeViL

legendary

Activity: 986

Merit: 1027

Miner-Control.de Pooler

Again Chainsplit, direct seen on controlling , between 234007 and 234008

Resync my pool, was 10 Blocks forward...
I dont want to lost 3 days again.

EDIT: resync finish, but the pool wallet goes again in the longest chain.

So we have a chain Split again!!!!!!!

Explorer Chain height 234017
Pool chain height 234038

So, dev? What now? Resync ? Or make the Explorer a Resync??

polishfarmer

newbie

Activity: 42

Merit: 0

Hi, i withdrew my ams from coinexchange a day ago and it still hasnt shown up in my windows desktop client. does anyone know why? the exchange completed the transaction. But the txid and wallet address show nothing in the block explorer.

is this because of split chains? is there a solution to this problem?

yalkshire

newbie

Activity: 1

Merit: 0

@miner-control
I was just about to leave for the night and did a last checkup on the miner. AMS is starting to get rejected since ~0.5h. A quick check makes me believe you're in a split chain. Not sure though but I don't have the time to investigate further.
If I don't see some feedback tomorrow I'll have a better look, hope I'm wrong.

greenhope

full member

Activity: 446

Merit: 105

Where is this 0.05 MN reward coming?

madmack1

member

Activity: 157

Merit: 11

Quote from: vivland on January 26, 2018, 03:23:11 AM

Hello colleagues, someone can tell me the POS extraction of AMS is already underway? And if there is, what is the minimum amount suitable for POS. Installed wallet, the day is on the balance of nearly 3K coins and not one of the POS's to come. It may be that you have in your wallet to configure additionally? But usually adjustments are necessary. Prompt in what direction to go??

POS isnt active yet mate.

Topic: [ANN][AMS] AmsterdamCoin™ | 100% PoS, Masternodes, Obfuscation, Seesaw - page 62. (Read 272368 times)