[ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9 - page 104.

karen0929

newbie

Activity: 13

Merit: 0

Quote from: supermoew on May 15, 2018, 03:33:17 AM

Quote from: realbminer on May 14, 2018, 09:23:08 PM

Quote from: AykutCanturk on May 13, 2018, 05:35:56 PM

I run bminer for almost 15 days and I'm very happy about it.

My question is what happens if I run two instances of bminer one for ZEN and other is for BTCP ? both on same pool (suprnova). But without configuring GPU usage. Does one intercept other ? can I fully utilize my GPU power ?

thanks.

If you run two bminer programs on the same devices, they do not intercept each other. But, like running two processes on the same computer in general, they will compete for the computation resources. And there will be some process switching cost.

Will bminer adapt new Equihash algorithm?

What algorithm? will you support 192,7 or 144,5?

supermoew

newbie

Activity: 61

Merit: 0

Quote from: realbminer on May 14, 2018, 09:23:08 PM

Quote from: AykutCanturk on May 13, 2018, 05:35:56 PM

I run bminer for almost 15 days and I'm very happy about it.

My question is what happens if I run two instances of bminer one for ZEN and other is for BTCP ? both on same pool (suprnova). But without configuring GPU usage. Does one intercept other ? can I fully utilize my GPU power ?

thanks.

If you run two bminer programs on the same devices, they do not intercept each other. But, like running two processes on the same computer in general, they will compete for the computation resources. And there will be some process switching cost.

Will bminer adapt new Equihash algorithm?

nUm81

member

Activity: 126

Merit: 11

@realbminer,

With the most likely upcoming change of the equihash params from 200/9 to 144/5, is this going to be a significant re-work for your miner? Also would you be able to provide a dev build with the adjusted N and K values so that devs and pool operators can begin prepping for the change?

realbminer

member

Activity: 461

Merit: 49

Quote from: AykutCanturk on May 13, 2018, 05:35:56 PM

I run bminer for almost 15 days and I'm very happy about it.

My question is what happens if I run two instances of bminer one for ZEN and other is for BTCP ? both on same pool (suprnova). But without configuring GPU usage. Does one intercept other ? can I fully utilize my GPU power ?

thanks.

If you run two bminer programs on the same devices, they do not intercept each other. But, like running two processes on the same computer in general, they will compete for the computation resources. And there will be some process switching cost.

wetblanket

jr. member

Activity: 95

Merit: 2

Quote from: AykutCanturk on May 13, 2018, 05:35:56 PM

My question is what happens if I run two instances of bminer one for ZEN and other is for BTCP ? both on same pool (suprnova). But without configuring GPU usage. Does one intercept other ? can I fully utilize my GPU power ?

They're different pools, but both owned/run by Suprnova.

Yes, you can mine both ZEN/BTCP pools, you just need to specify GPU devices for each running instance of the mining software using whatever the device flag is. Otherwise, the miner will try to use all GPUs for both running instances.

AykutCanturk

newbie

Activity: 7

Merit: 0

I run bminer for almost 15 days and I'm very happy about it.

My question is what happens if I run two instances of bminer one for ZEN and other is for BTCP ? both on same pool (suprnova). But without configuring GPU usage. Does one intercept other ? can I fully utilize my GPU power ?

thanks.

wolf_miner

legendary

Activity: 1018

Merit: 1001

Quote from: realbminer on May 03, 2018, 11:36:49 PM

Quote from: wolf_miner on May 03, 2018, 01:09:28 AM

Hi, V.7 linux release on Hiveos has some problem, GPU goes offline often.

Cheers W_M

Hi, would you please give me more information about what error it is? what coins and pools you are using when it happens?

it would be great if you can send me logs to diagnose the problem.

thx!

Hi, this is the log. GPUs goes often offline with "[FATA] [2018-05-12T20:45:00+02:00] Irrecoverable errors: [Dx] GPU hang detected" so the miner restart every 3/5 minutes.

Quote

[INFO] [2018-05-12T20:42:30+02:00] [GPU 0] Speed: 270.40 Sol/s 145.69 Nonce/s Temp: 57C Fan: 60% Power: 73W 3.70 Sol/J
[INFO] [2018-05-12T20:42:31+02:00] [GPU 1] Speed: 274.56 Sol/s 146.39 Nonce/s Temp: 57C Fan: 58% Power: 74W 3.71 Sol/J
[INFO] [2018-05-12T20:42:32+02:00] [GPU 2] Speed: 271.47 Sol/s 145.27 Nonce/s Temp: 52C Fan: 56% Power: 75W 3.62 Sol/J
[INFO] [2018-05-12T20:42:55+02:00] Total 816.43 Sol/s 437.36 Nonce/s Accepted shares 23 Rejected shares 0
[INFO] [2018-05-12T20:43:00+02:00] [GPU 0] Speed: 272.38 Sol/s 146.60 Nonce/s Temp: 57C Fan: 60% Power: 72W 3.78 Sol/J
[INFO] [2018-05-12T20:43:00+02:00] Accepted share #27
[INFO] [2018-05-12T20:43:01+02:00] [GPU 1] Speed: 277.09 Sol/s 147.25 Nonce/s Temp: 57C Fan: 58% Power: 74W 3.74 Sol/J
[INFO] [2018-05-12T20:43:02+02:00] [GPU 2] Speed: 0.00 Sol/s 113.49 Nonce/s Temp: 46C Fan: 56% Power: 31W 0.00 Sol/J
[INFO] [2018-05-12T20:43:13+02:00] Received new job 342009553762048
[INFO] [2018-05-12T20:43:25+02:00] Total 549.47 Sol/s 407.35 Nonce/s Accepted shares 24 Rejected shares 0
[INFO] [2018-05-12T20:43:31+02:00] [GPU 0] Speed: 270.42 Sol/s 144.72 Nonce/s Temp: 57C Fan: 60% Power: 72W 3.76 Sol/J
[INFO] [2018-05-12T20:43:31+02:00] [GPU 1] Speed: 275.55 Sol/s 145.51 Nonce/s Temp: 57C Fan: 58% Power: 75W 3.67 Sol/J
[INFO] [2018-05-12T20:43:32+02:00] [GPU 2] Speed: 0.00 Sol/s 68.84 Nonce/s Temp: 43C Fan: 56% Power: 31W 0.00 Sol/J
[INFO] [2018-05-12T20:43:55+02:00] Total 545.97 Sol/s 359.07 Nonce/s Accepted shares 24 Rejected shares 0
[INFO] [2018-05-12T20:44:01+02:00] [GPU 0] Speed: 273.12 Sol/s 145.40 Nonce/s Temp: 57C Fan: 60% Power: 73W 3.74 Sol/J
[INFO] [2018-05-12T20:44:01+02:00] [GPU 1] Speed: 273.77 Sol/s 146.11 Nonce/s Temp: 56C Fan: 58% Power: 76W 3.60 Sol/J
[INFO] [2018-05-12T20:44:02+02:00] [GPU 2] Speed: 0.00 Sol/s 41.75 Nonce/s Temp: 40C Fan: 56% Power: 31W 0.00 Sol/J
[INFO] [2018-05-12T20:44:13+02:00] Accepted share #28
[INFO] [2018-05-12T20:44:23+02:00] Accepted share #29
[INFO] [2018-05-12T20:44:25+02:00] Total 546.89 Sol/s 333.26 Nonce/s Accepted shares 26 Rejected shares 0
[INFO] [2018-05-12T20:44:29+02:00] Accepted share #30
[INFO] [2018-05-12T20:44:30+02:00] [GPU 0] Speed: 275.71 Sol/s 146.50 Nonce/s Temp: 57C Fan: 60% Power: 74W 3.73 Sol/J
[INFO] [2018-05-12T20:44:31+02:00] [GPU 1] Speed: 275.71 Sol/s 147.39 Nonce/s Temp: 56C Fan: 58% Power: 73W 3.78 Sol/J
[INFO] [2018-05-12T20:44:32+02:00] [GPU 2] Speed: 0.00 Sol/s 25.32 Nonce/s Temp: 39C Fan: 56% Power: 31W 0.00 Sol/J
[INFO] [2018-05-12T20:44:40+02:00] Accepted share #31
[INFO] [2018-05-12T20:44:43+02:00] Accepted share #32
[INFO] [2018-05-12T20:44:56+02:00] Total 551.42 Sol/s 319.21 Nonce/s Accepted shares 29 Rejected shares 0
[FATA] [2018-05-12T20:45:00+02:00] Irrecoverable errors: [D2] GPU hang detected
[WARN] [2018-05-12T20:45:01+02:00] Miner died! It will be restarted soon...
[INFO] [2018-05-12T20:45:08+02:00] Turning on experimental support for Ethash mining
[INFO] [2018-05-12T20:45:08+02:00] Bminer: When Crypto-mining Made Fast (v7.0.0-9c7291b)
[INFO] [2018-05-12T20:45:08+02:00] Watchdog has started.
[INFO] [2018-05-12T20:45:08+02:00] Starting miner on devices [0 1 2]
[INFO] [2018-05-12T20:45:08+02:00] Connected to safe.pool.sexy:21002
[INFO] [2018-05-12T20:45:08+02:00] Starting miner on device 0...
[INFO] [2018-05-12T20:45:08+02:00] Subscribed to stratum server
[INFO] [2018-05-12T20:45:08+02:00] Set nonce to 00000000000000000000d6aa
[INFO] [2018-05-12T20:45:08+02:00] Authorized
[INFO] [2018-05-12T20:45:08+02:00] Set target to 0540e86ba64ed20cb538731b9fd9810540e86ba64ed20cb538731b9fd9810500
[INFO] [2018-05-12T20:45:08+02:00] Received new job 324397054914344
[INFO] [2018-05-12T20:45:08+02:00] Started miner on device 0
[INFO] [2018-05-12T20:45:09+02:00] Starting miner on device 1...
[INFO] [2018-05-12T20:45:09+02:00] Started miner on device 1
[INFO] [2018-05-12T20:45:09+02:00] Received new job 376163046058684
[INFO] [2018-05-12T20:45:10+02:00] Starting miner on device 2...
[INFO] [2018-05-12T20:45:10+02:00] Started miner on device 2
[INFO] [2018-05-12T20:45:10+02:00] Starting miner on device 2...
[INFO] [2018-05-12T20:45:10+02:00] Started miner on device 2
[INFO] [2018-05-12T20:45:20+02:00] Accepted share #4
[INFO] [2018-05-12T20:45:25+02:00] Accepted share #5
[INFO] [2018-05-12T20:45:26+02:00] Accepted share #6
[INFO] [2018-05-12T20:45:32+02:00] Starting the management API at 127.0.0.1:1880
[INFO] [2018-05-12T20:45:38+02:00] [GPU 0] Speed: 289.18 Sol/s 149.04 Nonce/s Temp: 56C Fan: 60% Power: 73W 3.96 Sol/J
[INFO] [2018-05-12T20:45:39+02:00] [GPU 1] Speed: 288.97 Sol/s 149.04 Nonce/s Temp: 55C Fan: 58% Power: 73W 3.96 Sol/J
[INFO] [2018-05-12T20:45:40+02:00] [GPU 2] Speed: 286.90 Sol/s 149.04 Nonce/s Temp: 44C Fan: 56% Power: 74W 3.88 Sol/J
[INFO] [2018-05-12T20:45:55+02:00] Accepted share #7
[INFO] [2018-05-12T20:45:58+02:00] Accepted share #8
[INFO] [2018-05-12T20:46:00+02:00] Accepted share #9
[INFO] [2018-05-12T20:46:01+02:00] Total 865.05 Sol/s 447.12 Nonce/s Accepted shares 6 Rejected shares 0
[INFO] [2018-05-12T20:46:06+02:00] Received new job 230890808912918
[INFO] [2018-05-12T20:46:08+02:00] [GPU 0] Speed: 280.12 Sol/s 146.79 Nonce/s Temp: 56C Fan: 60% Power: 75W 3.73 Sol/J
[INFO] [2018-05-12T20:46:09+02:00] [GPU 1] Speed: 281.98 Sol/s 146.79 Nonce/s Temp: 56C Fan: 58% Power: 75W 3.76 Sol/J
[INFO] [2018-05-12T20:46:09+02:00] [GPU 2] Speed: 273.55 Sol/s 146.79 Nonce/s Temp: 46C Fan: 56% Power: 75W 3.65 Sol/J
...
[INFO] [2018-05-12T20:58:18+02:00] [GPU 0] Speed: 272.56 Sol/s 144.94 Nonce/s Temp: 57C Fan: 60% Power: 75W 3.63 Sol/J
[INFO] [2018-05-12T20:58:18+02:00] [GPU 1] Speed: 0.00 Sol/s 32.78 Nonce/s Temp: 44C Fan: 58% Power: 30W 0.00 Sol/J
[INFO] [2018-05-12T20:58:19+02:00] [GPU 2] Speed: 270.45 Sol/s 144.11 Nonce/s Temp: 52C Fan: 56% Power: 76W 3.56 Sol/J
[FATA] [2018-05-12T20:58:47+02:00] Irrecoverable errors: [D1] GPU hang detected
[WARN] [2018-05-12T20:58:48+02:00] Miner died! It will be restarted soon...
[INFO] [2018-05-12T20:58:54+02:00] Turning on experimental support for Ethash mining
[INFO] [2018-05-12T20:58:54+02:00] Bminer: When Crypto-mining Made Fast (v7.0.0-9c7291b)
[INFO] [2018-05-12T20:58:54+02:00] Watchdog has started.
[INFO] [2018-05-12T20:58:54+02:00] Starting miner on devices [0 1 2]
[INFO] [2018-05-12T20:58:55+02:00] Connected to safe.pool.sexy:21002
[INFO] [2018-05-12T20:58:55+02:00] Starting miner on device 0...
[INFO] [2018-05-12T20:58:55+02:00] Subscribed to stratum server
[INFO] [2018-05-12T20:58:55+02:00] Set nonce to 00000000000000000000d6e5
[INFO] [2018-05-12T20:58:55+02:00] Authorized

Cheers W_M

supermoew

newbie

Activity: 61

Merit: 0

Quote from: swisstrader on May 08, 2018, 04:46:31 PM

8 x 1070 Ti
tuned and overclocked
PM = 1, PL = 112, OC 200/1200, Fan = 75/70%

With bminer I get the best results. Thank you, BMiner!

Please change in the dashboard Sols/W to Sols/J.

As next I need to check Ethash mining. Grin

https://i.imgur.com/0rWaMrG.png

any update about the Ethash mining result?

swisstrader

member

Activity: 128

Merit: 10

8 x 1070 Ti
tuned and overclocked
PM = 1, PL = 112, OC 200/1200, Fan = 75/70%

With bminer I get the best results. Thank you, BMiner!

Please change in the dashboard Sols/W to Sols/J.

As next I need to check Ethash mining. Grin

UselessGuru

jr. member

Activity: 200

Merit: 3

Quote from: realbminer on May 07, 2018, 10:46:46 PM

Quote from: UselessGuru on May 05, 2018, 11:05:32 AM

Some pools (ZergPool, Zpool etc.) require to specify the payout currency by setting it in the password field like this (example taken from http://zergpool.com/):

-o stratum+tcp://neoscrypt.mine.zergpool.com:PORT -u -p c=GUN,mc=GUN

where the required password is c=GUN,mc=GUN

BTW: Yes I am aware the bmnier does NOT do neoscrypt, this is just an example. The same applies however for any other algos like ethash or equihash.

Please refer https://www.bminer.me/examples/#escaping-characters-in-the-uri to solve your problem.
You can always follow RFC 1738 (https://tools.ietf.org/html/rfc1738) to escape special characters.

>> Please refer https://www.bminer.me/examples/#escaping-characters-in-the-uri to solve your problem.

That's what I do now, but it is not customer friendly. It would be much easier if the miner took care of it :-)

realbminer

member

Activity: 461

Merit: 49

Quote from: UselessGuru on May 05, 2018, 11:05:32 AM

Quote from: realbminer on May 04, 2018, 10:30:37 AM

Quote from: UselessGuru on May 03, 2018, 12:53:58 AM

Quote from: realbminer on May 02, 2018, 09:31:12 PM

Quote from: UselessGuru on May 02, 2018, 05:29:32 AM

How to pass additional parameters in the password field?

Some pools, e.g. zpool allow to define additional mining settings in the password field. See an example below:

BMiner.exe -api 127.0.0.1:1880 -uri stratum://1GSq8txFsg1je6yL8t6S94mYdF8cGqVQJF:BLACKBOX,c=BTC@equihash.mine.zpool.ca:2142 -devices 0

Bminer throws an error:

invalid value "stratum://1GSq8txFsg1je6yL8t6S94mYdF8cGqVQJF:BLACKBOX,[email protected]:2142" for flag -uri: Invalid port in the URI
Bminer: When Crypto-mining Made Fast (v7.0.0-9c7291b)

Thanks for your feedback! Please refer to our sample usage page for examples of setting passwords in the command: https://www.bminer.me/examples/.

Here is a concrete example:
bminer -uri stratum://foo.w:[email protected]:17023
The command above will mine towards the username foo, worker name w and password pwd

Hello

This does not help me Angry

This is what I tried - same error:
BMiner.exe -api 127.0.0.1:1880 -uri stratum://1GSq8txFsg1je6yL8t6S94mYdF8cGqVQJF.BLACKBOX:x,[email protected]:2142 -devices 0

Bminer still does not allow me to use ,c=BTC as part of password. Please fix.

Edit: As a workaround I encode the user & password parameters with '[System.Web.HttpUtility]::UrlEncode("StringToEncode")' (Powershell)

Hi, May I ask what is your password exactly? x,c=BTC or ,c=BTC or c=BTC?
The problem is caused by the comma inside the command. We suggest you choose a password without comma.

Some pools (ZergPool, Zpool etc.) require to specify the payout currency by setting it in the password field like this (example taken from http://zergpool.com/):

-o stratum+tcp://neoscrypt.mine.zergpool.com:PORT -u -p c=GUN,mc=GUN

where the required password is c=GUN,mc=GUN

BTW: Yes I am aware the bmnier does NOT do neoscrypt, this is just an example. The same applies however for any other algos like ethash or equihash.

Please refer https://www.bminer.me/examples/#escaping-characters-in-the-uri to solve your problem.
You can always follow RFC 1738 (https://tools.ietf.org/html/rfc1738) to escape special characters.

UselessGuru

jr. member

Activity: 200

Merit: 3

Quote from: realbminer on May 04, 2018, 10:30:37 AM

Quote from: UselessGuru on May 03, 2018, 12:53:58 AM

Quote from: realbminer on May 02, 2018, 09:31:12 PM

Quote from: UselessGuru on May 02, 2018, 05:29:32 AM

How to pass additional parameters in the password field?

Some pools, e.g. zpool allow to define additional mining settings in the password field. See an example below:

BMiner.exe -api 127.0.0.1:1880 -uri stratum://1GSq8txFsg1je6yL8t6S94mYdF8cGqVQJF:BLACKBOX,c=BTC@equihash.mine.zpool.ca:2142 -devices 0

Bminer throws an error:

invalid value "stratum://1GSq8txFsg1je6yL8t6S94mYdF8cGqVQJF:BLACKBOX,[email protected]:2142" for flag -uri: Invalid port in the URI
Bminer: When Crypto-mining Made Fast (v7.0.0-9c7291b)

Thanks for your feedback! Please refer to our sample usage page for examples of setting passwords in the command: https://www.bminer.me/examples/.

Here is a concrete example:
bminer -uri stratum://foo.w:[email protected]:17023
The command above will mine towards the username foo, worker name w and password pwd

Hello

This does not help me Angry

This is what I tried - same error:
BMiner.exe -api 127.0.0.1:1880 -uri stratum://1GSq8txFsg1je6yL8t6S94mYdF8cGqVQJF.BLACKBOX:x,[email protected]:2142 -devices 0

Bminer still does not allow me to use ,c=BTC as part of password. Please fix.

Edit: As a workaround I encode the user & password parameters with '[System.Web.HttpUtility]::UrlEncode("StringToEncode")' (Powershell)

Hi, May I ask what is your password exactly? x,c=BTC or ,c=BTC or c=BTC?
The problem is caused by the comma inside the command. We suggest you choose a password without comma.

Some pools (ZergPool, Zpool etc.) require to specify the payout currency by setting it in the password field like this (example taken from http://zergpool.com/):

-o stratum+tcp://neoscrypt.mine.zergpool.com:PORT -u -p c=GUN,mc=GUN

where the required password is c=GUN,mc=GUN

BTW: Yes I am aware the bmnier does NOT do neoscrypt, this is just an example. The same applies however for any other algos like ethash or equihash.

realbminer

member

Activity: 461

Merit: 49

Quote from: UselessGuru on May 02, 2018, 06:00:40 AM

Documentation clarification requested

I found this table:

* Equihash   Stratum   stratum://
* Equihash   Stratum over SSL   stratum+ssl://
* Ethash   Stratum   ethash://
* Ethash   Stratum over SSL   ethash+ssl://
* Ethash   Ethereum Proxy   ethproxy://
* Ethash   Ethereum Stratum   ethstratum://

During my tests I found that 'ethash' and' ethash+ssl' do NOT work properly (tried mining Ethereum on NiceHash and MiningPoolHub as well as Musicoin on MiningPoolHub).
It is creating DAGs over and over again...

[INFO] [2018-05-02T15:42:01+02:00] Received new job 422
[INFO] [2018-05-02T15:42:01+02:00] [D0] Creating DAG
[INFO] [2018-05-02T15:42:05+02:00] [D0] DAG has been created
[INFO] [2018-05-02T15:42:08+02:00] Received new job 423
[INFO] [2018-05-02T15:42:08+02:00] [D0] Creating DAG
[INFO] [2018-05-02T15:42:12+02:00] [GPU 0] Speed: 41.37 MH/s Temp: 69C Fan: 51% Power: 213W 0.19 MH/J
[INFO] [2018-05-02T15:42:12+02:00] Total 41.37 MH/s Accepted shares 0 Rejected shares 0
[INFO] [2018-05-02T15:42:12+02:00] [D0] DAG has been created
[INFO] [2018-05-02T15:42:17+02:00] Received new job 424
[INFO] [2018-05-02T15:42:17+02:00] [D0] Creating DAG
[INFO] [2018-05-02T15:42:21+02:00] [D0] DAG has been created
[WARN] [2018-05-02T15:42:39+02:00] Rejected share #4 ([21,"incorrect size of nonce"])
[INFO] [2018-05-02T15:42:42+02:00] [GPU 0] Speed: 42.92 MH/s Temp: 69C Fan: 52% Power: 212W 0.20 MH/J
[INFO] [2018-05-02T15:42:42+02:00] Total 42.92 MH/s Accepted shares 0 Rejected shares 1
[INFO] [2018-05-02T15:42:46+02:00] Received new job 425
[INFO] [2018-05-02T15:42:46+02:00] [D0] Creating DAG
[INFO] [2018-05-02T15:42:46+02:00] Received new job 426
[INFO] [2018-05-02T15:42:50+02:00] [D0] DAG has been created
[INFO] [2018-05-02T15:42:50+02:00] [D0] Creating DAG
[INFO] [2018-05-02T15:42:54+02:00] [D0] DAG has been created
[INFO] [2018-05-02T15:43:04+02:00] Received new job 427
[INFO] [2018-05-02T15:43:04+02:00] [D0] Creating DAG
[INFO] [2018-05-02T15:43:07+02:00] [D0] DAG has been created
[INFO] [2018-05-02T15:43:12+02:00] [GPU 0] Speed: 38.75 MH/s Temp: 70C Fan: 52% Power: 214W 0.18 MH/J
[INFO] [2018-05-02T15:43:12+02:00] Total 38.75 MH/s Accepted shares 0 Rejected shares 1
[INFO] [2018-05-02T15:43:12+02:00] Received new job 428

'Ethstratum' works for Ethereum (tested on NiceHash) and MusiCoin (tested on MininPoolHub). But how do I mine Ethereum Stratum over SSL ? There is no 'ethstratum+ssl' Huh

Which parameters should be used to mine which algos / coins?

Hi, Would you please paste your command line here?
like ' bminer -uri stratum://[email protected]:6666'
since the error can't reappear to us until we have your command line.

realbminer

member

Activity: 461

Merit: 49

Quote from: UselessGuru on May 03, 2018, 12:53:58 AM

Quote from: realbminer on May 02, 2018, 09:31:12 PM

Quote from: UselessGuru on May 02, 2018, 05:29:32 AM

How to pass additional parameters in the password field?

Some pools, e.g. zpool allow to define additional mining settings in the password field. See an example below:

BMiner.exe -api 127.0.0.1:1880 -uri stratum://1GSq8txFsg1je6yL8t6S94mYdF8cGqVQJF:BLACKBOX,c=BTC@equihash.mine.zpool.ca:2142 -devices 0

Bminer throws an error:

invalid value "stratum://1GSq8txFsg1je6yL8t6S94mYdF8cGqVQJF:BLACKBOX,[email protected]:2142" for flag -uri: Invalid port in the URI
Bminer: When Crypto-mining Made Fast (v7.0.0-9c7291b)

Thanks for your feedback! Please refer to our sample usage page for examples of setting passwords in the command: https://www.bminer.me/examples/.

Here is a concrete example:
bminer -uri stratum://foo.w:[email protected]:17023
The command above will mine towards the username foo, worker name w and password pwd

Hello

This does not help me Angry

This is what I tried - same error:
BMiner.exe -api 127.0.0.1:1880 -uri stratum://1GSq8txFsg1je6yL8t6S94mYdF8cGqVQJF.BLACKBOX:x,[email protected]:2142 -devices 0

Bminer still does not allow me to use ,c=BTC as part of password. Please fix.

Edit: As a workaround I encode the user & password parameters with '[System.Web.HttpUtility]::UrlEncode("StringToEncode")' (Powershell)

Hi, May I ask what is your password exactly? x,c=BTC or ,c=BTC or c=BTC?
The problem is caused by the comma inside the command. We suggest you choose a password without comma.

realbminer

member

Activity: 461

Merit: 49

Quote from: wolf_miner on May 03, 2018, 01:09:28 AM

Hi, V.7 linux release on Hiveos has some problem, GPU goes offline often.

Cheers W_M

Hi, would you please give me more information about what error it is? what coins and pools you are using when it happens?

it would be great if you can send me logs to diagnose the problem.

thx!

realbminer

member

Activity: 461

Merit: 49

Quote from: Quake4 on April 28, 2018, 05:20:24 AM

Where is hashrate for eth mine?

On stock settings:

21.0 MH/s on GTX 1060
26.5 MH/s on GTX 1070
32.2MH/s on GTX 1080Ti

Oliver81

newbie

Activity: 1

Merit: 0

http://prntscr.com/jdc3ze
help please
error

ayiphelmy

copper member

Activity: 416

Merit: 105

Quote from: Keko Fdez on May 03, 2018, 09:34:59 AM

that´s ok.

I pay 0.0840 Kw/h so is not that far off from yours. I will try these settings and see how much does the electricity increases.

Are those numbers with the new drivers 397.35 or with the previous ones 391.35?

i use 388.71 driver if i upgrade the driver hashrate us going down

Keko Fdez

jr. member

Activity: 108

Merit: 7

that´s ok.

I pay 0.0840 Kw/h so is not that far off from yours. I will try these settings and see how much does the electricity increases.

Are those numbers with the new drivers 397.35 or with the previous ones 391.35?

ayiphelmy

copper member

Activity: 416

Merit: 105

Quote from: Keko Fdez on May 03, 2018, 09:23:17 AM

Quote from: ayiphelmy on May 03, 2018, 08:51:30 AM

Quote from: Keko Fdez on May 03, 2018, 05:44:27 AM

For people with NVIDIA cards specially those with GTX 1070 Ti.

Has someone tried the new drivers 397.31 released on the 25th of april? if so any improvements compared to previous version 391.35??

I have installed 391.35 and with 70%TDP, +200 clock and +700 memory I get 3090 average hashrate with 6 GTX 1070 Ti.

Thanks everyone

try 80% tdp +200 clock and +600 memory i get 3280 with 6x 1070ti

Thanks.

the problem with those settings is that you only get 190 hashrate more than I do but the power draw from the wall is much higher so the cost of electricity doesn´t compensate the increase hashrate.

with my settings power draw is 830W total. Whats yours?

my power draw is 176w each vga but the cost for electricyty is cheap here only 0.09$/kwh

Topic: [ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9 - page 104. (Read 148347 times)