Topic: [ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9 - page 26. (Read 148347 times)
March 30, 2019, 04:02:32 PM
add more virtual memory
March 30, 2019, 01:37:43 PM
Can bminer only support 10 1070 gpu rigs??? The miner quits when it registers the 11th gpu. Im maxed out on virtual memory at 77000 mb, so not sure if thats the issue or if cpu can't handle it.
It seems that memory was the issue. I added RAM and now can mine with 12 gpus.
March 30, 2019, 06:53:44 AM
15.4.0 still showing this error sometimes, like previous versions:
[WARN] [2019-03-30T13:51:07+02:00] Rejected share #0 ({"code":-5,"message":"Invalid nonce; is miner not compatible with NiceHash?"})
[WARN] [2019-03-30T13:51:07+02:00] Rejected share #0 ({"code":-5,"message":"Invalid nonce; is miner not compatible with NiceHash?"})
March 30, 2019, 06:21:32 AM
yes, and more - 13 * 1060/1070/P104, but on linux. mining on windows is pain...
March 30, 2019, 06:16:33 AM
Can bminer only support 10 1070 gpu rigs??? The miner quits when it registers the 11th gpu. Im maxed out on virtual memory at 77000 mb, so not sure if thats the issue or if cpu can't handle it.
March 30, 2019, 05:33:14 AM
with some pools like sparkpool bminer has about 5% reject share rate. but usually it is still more profitable than gminer. which has much higher cpu usage and in general can not be used with 10+ gpu rigs.
just a hint. use pool with static diff and compare miners by amount of shares for the same time period. this method still depends on luck, but anyway more accurate than comparing reported hashrate...
just a hint. use pool with static diff and compare miners by amount of shares for the same time period. this method still depends on luck, but anyway more accurate than comparing reported hashrate...
March 30, 2019, 04:53:51 AM
Sorry to say, but can't get it stable on any of my rigs, to much rejected shares, -fast function doesn't work either.
Tested on Simplemining, 1060, 1070, 1070ti and 1080ti rigs.
Sticking with Gminer for the moment.
Tested on Simplemining, 1060, 1070, 1070ti and 1080ti rigs.
Sticking with Gminer for the moment.
--fast
several users have given me pretty positive feedbacks...
March 30, 2019, 04:07:02 AM
realbminer, please add job diff to miner output
March 29, 2019, 11:03:50 PM
I tried the new 15.4 with the --fast flag and it will not accept any shares on thegrinpool. I went back to version 15.3.1 and it will not work either now. Is there a way to disable the --fast flag once it has been activated or is simply removing it from the command line sufficient. I am on Windows 7 with a 1070
Just remove the --fast flag in your command line it will be diabled.
Have you tried combine intensity and --fast to see if it helps? since we have tried on our rig and it helps.
What is the default intensity? I need a base to start experimenting from. Thanks
March 29, 2019, 07:00:56 PM
Sorry to say, but can't get it stable on any of my rigs, to much rejected shares, -fast function doesn't work either.
Tested on Simplemining, 1060, 1070, 1070ti and 1080ti rigs.
Sticking with Gminer for the moment.
Tested on Simplemining, 1060, 1070, 1070ti and 1080ti rigs.
Sticking with Gminer for the moment.
--fast
several users have given me pretty positive feedbacks...
Well, on simplemining 1070ti, power 140 watts, core+ 50 mem 0 ....i get crap ...
Same on the 1080ti on 165 watts
28 accepted and 26 rejected is not good..
beepool
[WARN] [2019-03-30T00:58:55+01:00] Rejected share #57 ([23,_incorrect pow with n_])
[INFO] [2019-03-30T00:58:55+01:00] Accepted share #58
[INFO] [2019-03-30T00:59:04+01:00] Set target to 3fffc000 (4.000000)
[INFO] [2019-03-30T00:59:04+01:00] Received new job c157ea181
[INFO] [2019-03-30T00:59:10+01:00] [GPU 0] Speed: 5.03 H/s Fidelity 0.872 Temp: 53C Fan: 40% Power: 193W 0.03 H/J
[INFO] [2019-03-30T00:59:10+01:00] [GPU 1] Speed: 5.09 H/s Fidelity 0.964 Temp: 53C Fan: 40% Power: 116W 0.04 H/J
[INFO] [2019-03-30T00:59:10+01:00] [GPU 2] Speed: 5.06 H/s Fidelity 0.868 Temp: 55C Fan: 40% Power: 99W 0.05 H/J
[INFO] [2019-03-30T00:59:10+01:00] [GPU 3] Speed: 5.07 H/s Fidelity 0.866 Temp: 54C Fan: 40% Power: 111W 0.05 H/J
[INFO] [2019-03-30T00:59:10+01:00] [GPU 4] Speed: 5.08 H/s Fidelity 0.672 Temp: 49C Fan: 40% Power: 102W 0.05 H/J
[INFO] [2019-03-30T00:59:11+01:00] [GPU 5] Speed: 5.10 H/s Fidelity 1.057 Temp: 43C Fan: 40% Power: 97W 0.05 H/J
[INFO] [2019-03-30T00:59:11+01:00] Total 30.44 H/s Accepted shares 28 Rejected shares 26
March 29, 2019, 06:31:54 PM
CUDA error DRIVER: '2' in func 'bminer::cuckoo::CuckooStyleSolverCudaBase::InitializeCudaEnvironment' line 76
1080ti 419.67 drivers
85pl. +500 memory, 50 clock
can help me? what problem?
1080ti 419.67 drivers
85pl. +500 memory, 50 clock
can help me? what problem?
March 29, 2019, 06:21:47 PM
what the virtual memory setting I need to have to mine grin with 12 1070 gpus?
March 29, 2019, 02:13:25 PM
very short test on Grin29, luxor.tech pool, win 10 driver 419.35, single gpu pc i5 with gtx1070, core +160, mem +600, power 65%:
v15.3.1: 4.45 G/s
v15.4.0: 4.80 G/s with --fast option => close to 5.0 G/s after a few hours...
I noticed only a slight improvement in speed with gtx1070:v15.3.1: 4.45 G/s
v15.4.0: 4.80 G/s with --fast option => close to 5.0 G/s after a few hours...
4.41 G/s (v15.3.1) --> 4.45 G/s (v15.4.0)
my gtx1070 is around 5.0 G/s on 24 h, fidelity is 1.077 (was close to 1.0 on previous version)
my gtx1080ti went from 7.6 G/s to 8.0 G/s at 70% power load with v15.4.0 --fast (+120 core +600 mem), fidelity 0.993
March 29, 2019, 01:26:19 PM
working on it...
Small request from someone maintain an ethOS integration; https://github.com/cynixx3/third-party-miner-installer-for-ethos
Will you please add a version call to your miner. E.G. "./bminer --version"
Thank you for your work on this miner, its great.
No?
I have already shared your post to another dev, not sure the exact date to add yet.
March 29, 2019, 01:09:29 PM
working on it...
Small request from someone maintain an ethOS integration; https://github.com/cynixx3/third-party-miner-installer-for-ethos
Will you please add a version call to your miner. E.G. "./bminer --version"
Thank you for your work on this miner, its great.
No?
March 29, 2019, 12:58:23 PM
Sorry to say, but can't get it stable on any of my rigs, to much rejected shares, -fast function doesn't work either.
Tested on Simplemining, 1060, 1070, 1070ti and 1080ti rigs.
Sticking with Gminer for the moment.
Tested on Simplemining, 1060, 1070, 1070ti and 1080ti rigs.
Sticking with Gminer for the moment.
--fast
several users have given me pretty positive feedbacks...
March 29, 2019, 12:56:31 PM
We're pleased to release Bminer 15.4.0. The release provides:
* Improve performance of Cuckaroo29 / Aeternity.
* Improve compatibility on Windows.
* Add an experimental flag --fast to improve the performance for Cuckaroo29 / Aeternity, but it might lead to unstability on some systems.
Please see https://www.bminer.me/releases/ for more details.
Happy mining.
* Improve performance of Cuckaroo29 / Aeternity.
* Improve compatibility on Windows.
* Add an experimental flag --fast to improve the performance for Cuckaroo29 / Aeternity, but it might lead to unstability on some systems.
Please see https://www.bminer.me/releases/ for more details.
Happy mining.
Does this improve performance of Grin?
Grin mining on P102 is about 7.78G/s now. without using --fast flag.
March 29, 2019, 12:55:22 PM
I tried the new 15.4 with the --fast flag and it will not accept any shares on thegrinpool. I went back to version 15.3.1 and it will not work either now. Is there a way to disable the --fast flag once it has been activated or is simply removing it from the command line sufficient. I am on Windows 7 with a 1070
Just remove the --fast flag in your command line it will be diabled.
Have you tried combine intensity and --fast to see if it helps? since we have tried on our rig and it helps.
March 29, 2019, 11:53:04 AM
Am I able to use my old R9 290X's?
March 29, 2019, 11:24:49 AM
Is there an option to control the intensity for GPU? Also, what is the devfee when mining GRIN?
please try control cpu usage by -intensity first. please see https://bminer.me/faq/#how-to-adjust-the-cpu-usage-with-the-intensity-flag
grin devfee is 1%, please see https://bminer.me/
I tried that, didn't help. Actually I've been having constant issues with any version of bminer ever since I tried to undervolt my GPU's using this method: https://www.reddit.com/r/gpumining/comments/9d5i5r/undervolting_nvidia_on_linux/
After the miner crashed I had to reinstall every card again in order to get Ubuntu to detect my GPU's... And now bminer doesn't run stable anymore, crashes randomly after 30-90 minutes of mining.
The fans of some cards start spinning really hard then, and the miner just freezes and I have to manually reboot it. Did I break my cards with undervolting? I thought that wouldn't be possible.
Logs:
[INFO] [2019-03-29T16:53:48+01:00] [GPU 0] Speed: 4.57 G/s Fidelity 1.051 Temp: 61C Fan: 42% Power: 147W 0.03 G/J
[INFO] [2019-03-29T16:53:48+01:00] [GPU 1] Speed: 3.84 G/s Fidelity 1.355 Temp: 64C Fan: 46% Power: 128W 0.03 G/J
[INFO] [2019-03-29T16:53:48+01:00] [GPU 2] Speed: 4.35 G/s Fidelity 0.836 Temp: 65C Fan: 49% Power: 131W 0.03 G/J
[INFO] [2019-03-29T16:53:48+01:00] [GPU 3] Speed: 4.30 G/s Fidelity 1.012 Temp: 68C Fan: 54% Power: 120W 0.04 G/J
[INFO] [2019-03-29T16:53:48+01:00] [GPU 4] Speed: 4.32 G/s Fidelity 0.832 Temp: 70C Fan: 59% Power: 141W 0.03 G/J
[INFO] [2019-03-29T16:53:49+01:00] Total 21.38 G/s Accepted shares 41 Rejected shares 0
[INFO] [2019-03-29T16:54:00+01:00] Received new job 7
[INFO] [2019-03-29T16:54:01+01:00] Accepted share
[INFO] [2019-03-29T16:54:07+01:00] Accepted share
[INFO] [2019-03-29T16:54:07+01:00] Received new job 0
[INFO] [2019-03-29T16:54:18+01:00] [GPU 0] Speed: 4.58 G/s Fidelity 1.012 Temp: 62C Fan: 43% Power: 134W 0.03 G/J
[INFO] [2019-03-29T16:54:18+01:00] [GPU 1] Speed: 2.97 G/s Fidelity 1.295 Temp: 63C Fan: 47% Power: 124W 0.02 G/J
[ERRO] [2019-03-29T16:54:18+01:00] Failed to fetch device Status for device id: 1, Error code: 15
[INFO] [2019-03-29T16:54:18+01:00] [GPU 2] Speed: 4.32 G/s Fidelity 0.973 Temp: 65C Fan: 49% Power: 118W 0.04 G/J
[INFO] [2019-03-29T16:54:18+01:00] [GPU 3] Speed: 3.29 G/s Fidelity 0.968 Temp: 68C Fan: 55% Power: 162W 0.02 G/J
[ERRO] [2019-03-29T16:54:18+01:00] Failed to fetch device Status for device id: 3, Error code: 15
[INFO] [2019-03-29T16:54:18+01:00] [GPU 4] Speed: 3.32 G/s Fidelity 0.796 Temp: 70C Fan: 59% Power: 134W 0.02 G/J
[ERRO] [2019-03-29T16:54:18+01:00] Failed to fetch device Status for device id: 4, Error code: 15
[INFO] [2019-03-29T16:54:19+01:00] Total 18.48 G/s Accepted shares 43 Rejected shares 0
[INFO] [2019-03-29T16:54:22+01:00] Received new job 1
[INFO] [2019-03-29T16:54:33+01:00] Accepted share
[INFO] [2019-03-29T16:54:37+01:00] Received new job 2
[INFO] [2019-03-29T16:54:48+01:00] [GPU 0] Speed: 4.59 G/s Fidelity 0.980 Temp: 61C Fan: 43% Power: 124W 0.04 G/J
[INFO] [2019-03-29T16:54:48+01:00] [GPU 1] Speed: 1.80 G/s Fidelity 1.297 Temp: 1C Fan: 1% Power: 1W 1.80 G/J
[ERRO] [2019-03-29T16:54:48+01:00] Failed to fetch device Status for device id: 1, Error code: 15
[INFO] [2019-03-29T16:54:48+01:00] [GPU 2] Speed: 4.32 G/s Fidelity 0.975 Temp: 65C Fan: 50% Power: 132W 0.03 G/J
[INFO] [2019-03-29T16:54:48+01:00] [GPU 3] Speed: 2.00 G/s Fidelity 0.969 Temp: 1C Fan: 1% Power: 1W 2.00 G/J
[ERRO] [2019-03-29T16:54:48+01:00] Failed to fetch device Status for device id: 3, Error code: 15
[INFO] [2019-03-29T16:54:48+01:00] [GPU 4] Speed: 2.01 G/s Fidelity 0.797 Temp: 1C Fan: 1% Power: 1W 2.01 G/J
[ERRO] [2019-03-29T16:54:48+01:00] Failed to fetch device Status for device id: 4, Error code: 15
[INFO] [2019-03-29T16:54:49+01:00] Total 14.72 G/s Accepted shares 44 Rejected shares 0
[INFO] [2019-03-29T16:54:52+01:00] Received new job 3
[INFO] [2019-03-29T16:54:55+01:00] Accepted share
[INFO] [2019-03-29T16:54:59+01:00] Accepted share
Jump to: