[ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9 - page 28.

realbminer

member

Activity: 461

Merit: 49

Quote from: chuck732 on March 20, 2019, 07:56:00 AM

This is very funny --

Quote

Beam mining on stock settings
21 Sol/s on GTX 1070
12 Sol/s on GTX 1060 6G

I have rigs with GTX 1070's OC getting about 16.40 Sol/s

And rigs with GTX 1060 6G cards OC getting about 9.40- 11.20

And these were using bminer v15.3.1 I went back to v14.3.0.

My rigs run more stable with the older version. Why is this. I would love to get 21 Sol/s on stock setting for my GTX 1070's. I think the devs need to learn more. What cards are they using?

Our numbers are measured with the out-of-stock settings of GPUs.
The numbers can change drastically with different settings of power usages, core and memory clocks. Your results might vary.
https://bminer.me/performances/

topteam

newbie

Activity: 157

Merit: 0

Can you check connection to btc.com (beam coin)?

Code:

[INFO] Connected to eu-beam.ss.btc.com:1800
[WARN] Get error: Connection reset by peer, resetting in 5 seconds
[INFO] Connected to eu-beam.ss.btc.com:1800
[WARN] Get error: Connection reset by peer, resetting in 5 seconds

chuck732

member

Activity: 141

Merit: 10

Quote from: hustleman on March 20, 2019, 11:39:13 PM

Quote from: chuck732 on March 20, 2019, 11:26:50 PM

Quote from: hustleman on March 20, 2019, 11:08:19 PM

Quote from: chuck732 on March 20, 2019, 08:46:11 PM

Quote from: hustleman on March 20, 2019, 09:38:13 AM

Quote from: chuck732 on March 20, 2019, 07:56:00 AM

This is very funny --

Quote

Beam mining on stock settings
21 Sol/s on GTX 1070
12 Sol/s on GTX 1060 6G

I have rigs with GTX 1070's OC getting about 16.40 Sol/s

And rigs with GTX 1060 6G cards OC getting about 9.40- 11.20

And these were using bminer v15.3.1 I went back to v14.3.0.

My rigs run more stable with the older version. Why is this. I would love to get 21 Sol/s on stock setting for my GTX 1070's. I think the devs need to learn more. What cards are they using?

I hear ya!!! I asked the same question twice to the devs, what cards they were using. I was in the same range of 16-17 sols per card. Had to switch to gminer (which I didnt want to do) and getting 19-20.

Why didn't you want to use gminer?

Not sure of how true it is, but possible stolen code.

With out proof I'd use it. Then if proof is provided down the road you can stop using it. Is it stable? Is watchdog embedded in it?

True... Yes it is stable. Had no issue when running it.

Thank you. I just dropped bminer and went to gminer. Higher has rate. Grin

hustleman

jr. member

Activity: 155

Merit: 6

Quote from: chuck732 on March 20, 2019, 11:26:50 PM

Quote from: hustleman on March 20, 2019, 11:08:19 PM

Quote from: chuck732 on March 20, 2019, 08:46:11 PM

Quote from: hustleman on March 20, 2019, 09:38:13 AM

Quote from: chuck732 on March 20, 2019, 07:56:00 AM

This is very funny --

Quote

Beam mining on stock settings
21 Sol/s on GTX 1070
12 Sol/s on GTX 1060 6G

I have rigs with GTX 1070's OC getting about 16.40 Sol/s

And rigs with GTX 1060 6G cards OC getting about 9.40- 11.20

And these were using bminer v15.3.1 I went back to v14.3.0.

My rigs run more stable with the older version. Why is this. I would love to get 21 Sol/s on stock setting for my GTX 1070's. I think the devs need to learn more. What cards are they using?

I hear ya!!! I asked the same question twice to the devs, what cards they were using. I was in the same range of 16-17 sols per card. Had to switch to gminer (which I didnt want to do) and getting 19-20.

Why didn't you want to use gminer?

Not sure of how true it is, but possible stolen code.

With out proof I'd use it. Then if proof is provided down the road you can stop using it. Is it stable? Is watchdog embedded in it?

True... Yes it is stable. Had no issue when running it.

chuck732

member

Activity: 141

Merit: 10

Quote from: hustleman on March 20, 2019, 11:08:19 PM

Quote from: chuck732 on March 20, 2019, 08:46:11 PM

Quote from: hustleman on March 20, 2019, 09:38:13 AM

Quote from: chuck732 on March 20, 2019, 07:56:00 AM

This is very funny --

Quote

Beam mining on stock settings
21 Sol/s on GTX 1070
12 Sol/s on GTX 1060 6G

I have rigs with GTX 1070's OC getting about 16.40 Sol/s

And rigs with GTX 1060 6G cards OC getting about 9.40- 11.20

And these were using bminer v15.3.1 I went back to v14.3.0.

My rigs run more stable with the older version. Why is this. I would love to get 21 Sol/s on stock setting for my GTX 1070's. I think the devs need to learn more. What cards are they using?

I hear ya!!! I asked the same question twice to the devs, what cards they were using. I was in the same range of 16-17 sols per card. Had to switch to gminer (which I didnt want to do) and getting 19-20.

Why didn't you want to use gminer?

Not sure of how true it is, but possible stolen code.

With out proof I'd use it. Then if proof is provided down the road you can stop using it. Is it stable? Is watchdog embedded in it?

hustleman

jr. member

Activity: 155

Merit: 6

Quote from: chuck732 on March 20, 2019, 08:46:11 PM

Quote from: hustleman on March 20, 2019, 09:38:13 AM

Quote from: chuck732 on March 20, 2019, 07:56:00 AM

This is very funny --

Quote

Beam mining on stock settings
21 Sol/s on GTX 1070
12 Sol/s on GTX 1060 6G

I have rigs with GTX 1070's OC getting about 16.40 Sol/s

And rigs with GTX 1060 6G cards OC getting about 9.40- 11.20

And these were using bminer v15.3.1 I went back to v14.3.0.

My rigs run more stable with the older version. Why is this. I would love to get 21 Sol/s on stock setting for my GTX 1070's. I think the devs need to learn more. What cards are they using?

I hear ya!!! I asked the same question twice to the devs, what cards they were using. I was in the same range of 16-17 sols per card. Had to switch to gminer (which I didnt want to do) and getting 19-20.

Why didn't you want to use gminer?

Not sure of how true it is, but possible stolen code.

ohwhy

newbie

Activity: 14

Merit: 0

Hi Bminer,

Tried reaching out via Reddit, we operate TheGrinPool.com and were wondering if you can list us as a suggested miner! We have a growing mining community and also Ethash pool as well. Many of our miners switch between our pools for profitabiility reasons.

We currently user Bminer on all our machines mining Grin on our pool and it works fantastic! Highest hashrate of all miners we have tested!

chuck732

member

Activity: 141

Merit: 10

Quote from: hustleman on March 20, 2019, 09:38:13 AM

Quote from: chuck732 on March 20, 2019, 07:56:00 AM

This is very funny --

Quote

Beam mining on stock settings
21 Sol/s on GTX 1070
12 Sol/s on GTX 1060 6G

I have rigs with GTX 1070's OC getting about 16.40 Sol/s

And rigs with GTX 1060 6G cards OC getting about 9.40- 11.20

And these were using bminer v15.3.1 I went back to v14.3.0.

My rigs run more stable with the older version. Why is this. I would love to get 21 Sol/s on stock setting for my GTX 1070's. I think the devs need to learn more. What cards are they using?

I hear ya!!! I asked the same question twice to the devs, what cards they were using. I was in the same range of 16-17 sols per card. Had to switch to gminer (which I didnt want to do) and getting 19-20.

Why didn't you want to use gminer?

hustleman

jr. member

Activity: 155

Merit: 6

Quote from: chuck732 on March 20, 2019, 07:56:00 AM

This is very funny --

Quote

Beam mining on stock settings
21 Sol/s on GTX 1070
12 Sol/s on GTX 1060 6G

I have rigs with GTX 1070's OC getting about 16.40 Sol/s

And rigs with GTX 1060 6G cards OC getting about 9.40- 11.20

And these were using bminer v15.3.1 I went back to v14.3.0.

My rigs run more stable with the older version. Why is this. I would love to get 21 Sol/s on stock setting for my GTX 1070's. I think the devs need to learn more. What cards are they using?

I hear ya!!! I asked the same question twice to the devs, what cards they were using. I was in the same range of 16-17 sols per card. Had to switch to gminer (which I didnt want to do) and getting 19-20.

chuck732

member

Activity: 141

Merit: 10

This is very funny --

Quote

Beam mining on stock settings
21 Sol/s on GTX 1070
12 Sol/s on GTX 1060 6G

I have rigs with GTX 1070's OC getting about 16.40 Sol/s

And rigs with GTX 1060 6G cards OC getting about 9.40- 11.20

And these were using bminer v15.3.1 I went back to v14.3.0.

My rigs run more stable with the older version. Why is this. I would love to get 21 Sol/s on stock setting for my GTX 1070's. I think the devs need to learn more. What cards are they using?

yuzuak

member

Activity: 683

Merit: 16

@realbminer swap (xwp) added please

pbfarmer

member

Activity: 340

Merit: 29

Quote from: Scofield on March 18, 2019, 07:52:27 AM

Cannot get bminer to work with my 6x RX580 rig. Itś running Ubuntu 16.04 with AMDGPU-PRO drivers 17.40.
Getting the following errors:

How to fix?

Edit:

I also tried the latest version (15.3.1), gives a slightly different error:

...
15.1.0
Improve performance of Cuckaroo29 / Cuckatoo31.
Experimental support Cuckaroo29 on AMD cards ---->(ROCM only)<----
...

realbminer

member

Activity: 461

Merit: 49

Quote from: Digital_Seytan on March 17, 2019, 11:26:02 AM

Last version off this Bminer verry slow and works verry bad with Eth mining

solo or dual mining eth?
our numbers are measured with the out-of-stock settings of GPUs and the performance of mining Ethereum is measured with OhGodAnETHlargementPill enabled.

hustleman

jr. member

Activity: 155

Merit: 6

Quote from: stzcze on March 18, 2019, 01:59:48 AM

Quote from: hustleman on March 17, 2019, 10:00:04 PM

Quote from: stzcze on March 17, 2019, 03:35:49 PM

Quote from: hustleman on March 17, 2019, 10:15:01 AM

What am I doing wrong while mining BEAM (15.3.1v on leafpool) with 10 EVGA 1070 superclocked and superclocked 2s??? I have afterburner settings at 81 powerlimit +84 core and +500 memory and only obtaining 17 sols per card. The performance rating shown says 21 sols for 1070s.

I have another experience .... I use gminer, there it is ok.

Well that sucks... Trying to avoid gminer due to them having 2% dev fee

Both have a dev fee of 2% for the BEAM coin

Didnt know that. Thanks for the info.

Scofield

full member

Activity: 168

Merit: 100

Cannot get bminer to work with my 6x RX580 rig. Itś running Ubuntu 16.04 with AMDGPU-PRO drivers 17.40.
Getting the following errors:

How to fix?

Edit:

I also tried the latest version (15.3.1), gives a slightly different error:

stzcze

jr. member

Activity: 109

Merit: 1

Quote from: hustleman on March 17, 2019, 10:00:04 PM

Quote from: stzcze on March 17, 2019, 03:35:49 PM

Quote from: hustleman on March 17, 2019, 10:15:01 AM

What am I doing wrong while mining BEAM (15.3.1v on leafpool) with 10 EVGA 1070 superclocked and superclocked 2s??? I have afterburner settings at 81 powerlimit +84 core and +500 memory and only obtaining 17 sols per card. The performance rating shown says 21 sols for 1070s.

I have another experience .... I use gminer, there it is ok.

Well that sucks... Trying to avoid gminer due to them having 2% dev fee

Both have a dev fee of 2% for the BEAM coin

hustleman

jr. member

Activity: 155

Merit: 6

Quote from: stzcze on March 17, 2019, 03:35:49 PM

Quote from: hustleman on March 17, 2019, 10:15:01 AM

What am I doing wrong while mining BEAM (15.3.1v on leafpool) with 10 EVGA 1070 superclocked and superclocked 2s??? I have afterburner settings at 81 powerlimit +84 core and +500 memory and only obtaining 17 sols per card. The performance rating shown says 21 sols for 1070s.

I have another experience .... I use gminer, there it is ok.

Well that sucks... Trying to avoid gminer due to them having 2% dev fee

stzcze

jr. member

Activity: 109

Merit: 1

Quote from: hustleman on March 17, 2019, 10:15:01 AM

What am I doing wrong while mining BEAM (15.3.1v on leafpool) with 10 EVGA 1070 superclocked and superclocked 2s??? I have afterburner settings at 81 powerlimit +84 core and +500 memory and only obtaining 17 sols per card. The performance rating shown says 21 sols for 1070s.

I have another experience .... I use gminer, there it is ok.

Digital_Seytan

jr. member

Activity: 222

Merit: 2

[email protected]

Last version off this Bminer verry slow and works verry bad with Eth mining

iRonNuke

jr. member

Activity: 98

Merit: 6

Quote from: N2DCRYPT on March 16, 2019, 12:32:24 PM

Any planned support for C31 mean mining on AMD cards? Have polaris pro duos, Vega FEs, and Radeon VII's that would fit the bill in terms of mem size.

Yes I would like to see that, too.

Topic: [ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9 - page 28. (Read 148347 times)