Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 1070. (Read 2170895 times)
September 02, 2014, 05:37:40 AM
30 BTC wall at 600 satoshi now
September 02, 2014, 05:35:41 AM
30 btc buy wall at 500 sats.
Any speculation?
Edit: Now at 550 sats.
Any speculation?
Edit: Now at 550 sats.
Speculation -
1. Bittrex will add BURST soon.
2. Price will fly to 3k
That's on par with my early speculation... I suggested 3-5k for first large volume bubble...
Market cap is still only 195k. Coins have done crazier things than go 10 to even 100 times from this point.
September 02, 2014, 05:33:12 AM
trex just added NXT back, I guess they will be adding BURST soon aswell
https://twitter.com/richiela/status/506740972802158592
https://twitter.com/richiela/status/506740972802158592
September 02, 2014, 05:30:29 AM
ive been following this coin for a while now. and id say its not far off bursting 
into the 1k region atleast
into the 1k region atleast September 02, 2014, 05:28:13 AM
30 btc buy wall at 500 sats.
Any speculation?
Edit: Now at 550 sats.
Any speculation?
Edit: Now at 550 sats.
Speculation -
1. Bittrex will add BURST soon.
2. Price will fly to 3k
September 02, 2014, 05:23:22 AM
30 btc buy wall at 500 sats.
Any speculation?
Edit: Now at 550 sats.
Any speculation?
Edit: Now at 550 sats.
September 02, 2014, 05:17:04 AM
Am I the only one stuck on block 7789 
?
?{
"height": "7819",
"generationSignature": "eb5f3855062e4f0912c5ca4137022a9c5c816c713a6794d62f9c0b9b8a0e317c",
"baseTarget": "19106445",
"targetDeadline": "75000"
}
September 02, 2014, 05:15:30 AM
Am I the only one stuck on block 7789 ?
? September 02, 2014, 05:06:53 AM
Quote
NXT Support is back!
https://bittrex.zendesk.com/hc/en-us/articles/203150570Small
People.. We are going to Bittrex! Hold your coin and prepare for skyrocket!
Where do you request for coins to be added?
September 02, 2014, 05:06:30 AM
Quote
NXT Support is back!
https://bittrex.zendesk.com/hc/en-us/articles/203150570Small
People.. We are going to Bittrex! Hold your coin and prepare for skyrocket!
=O
BURST must have gotten their attention
September 02, 2014, 04:59:51 AM
enable prefetch should be 1 or 3?
1. edit your mine.bat's -Xmx parameter. Xmx sets the max memory each JVM instance is allowed.
2. Windows 7's prefetching has a tendency to attempt to load and keep in memory large amounts of plot data after it sees you keep reading the same files repeatedly. Ironically it sometimes can try to preload so much that there isn't enough memory left for the miner to actually function, causing instability. If you start mining, see the ram usage increasing, then close the miners and see that most of the memory has not been released, this is likely your issue. I had 2 machines that started fine, then started having stability issues like this, and disabling prefetching fixed both of them immediately. To do this, open the services manager, stop and disable superfetching, then open regedit, go to HKLM/system/currentcontrolset/control/sessionmanager/memory management/prefetchparameters, and set enable prefetch, and enable superfetch to 0. Then reboot
yes. at first start just using 16gb and keeps rising until fills up all memory. maybe im doing something wrong.
So your saying that you only start the miners and they start using 32 Gb of RAM?
There are 2 aspects to this.when i open 6 miner on 32gb machine memory usage at start 16gb and keeps rising and later fills up all memory. stagger size is 1024. total capacity is 6 tb.
The actual mining does not consume much memory. Plotting yes.
from the command "run_generate.bat 987654567890987612 0 80000 8000 7" that you are using to start plotting, 8000 represents the stagger size. The number of nonces to generate in a stack (stagger). And one nonce has 256 Kb of space/memory consumed/used
So, if you lower that you will lower the amount of memory needed to plot.
how can i configure windows machine or plots to use less memory?
The actual mining does not consume much memory. Plotting yes.
from the command "run_generate.bat 987654567890987612 0 80000 8000 7" that you are using to start plotting, 8000 represents the stagger size. The number of nonces to generate in a stack (stagger). And one nonce has 256 Kb of space/memory consumed/used
So, if you lower that you will lower the amount of memory needed to plot.
So your saying that you only start the miners and they start using 32 Gb of RAM?
1. edit your mine.bat's -Xmx parameter. Xmx sets the max memory each JVM instance is allowed.
2. Windows 7's prefetching has a tendency to attempt to load and keep in memory large amounts of plot data after it sees you keep reading the same files repeatedly. Ironically it sometimes can try to preload so much that there isn't enough memory left for the miner to actually function, causing instability. If you start mining, see the ram usage increasing, then close the miners and see that most of the memory has not been released, this is likely your issue. I had 2 machines that started fine, then started having stability issues like this, and disabling prefetching fixed both of them immediately. To do this, open the services manager, stop and disable superfetching, then open regedit, go to HKLM/system/currentcontrolset/control/sessionmanager/memory management/prefetchparameters, and set enable prefetch, and enable superfetch to 0. Then reboot
September 02, 2014, 04:58:26 AM
Quote
NXT Support is back!
https://bittrex.zendesk.com/hc/en-us/articles/203150570Small
People.. We are going to Bittrex! Hold your coin and prepare for skyrocket!
September 02, 2014, 04:48:47 AM
Any new for the generator of plot in C ? Or nothing else ?
September 02, 2014, 04:48:40 AM
Where are you block 7789?
September 02, 2014, 04:38:05 AM
sweet got the long message i don't care about, thank you for the coin. so everything looks good. i can finally go to bed. thanks a bunch guys! wonderful community here defiantly will be sticking around 
goodnight. i look forward to learning more and stacking some HDD's up tommorrow
goodnight. i look forward to learning more and stacking some HDD's up tommorrowGood night and come back with results
September 02, 2014, 04:28:07 AM
sweet got the long message i don't care about, thank you for the coin. so everything looks good. i can finally go to bed. thanks a bunch guys! wonderful community here defiantly will be sticking around goodnight. i look forward to learning more and stacking some HDD's up tommorrow
goodnight. i look forward to learning more and stacking some HDD's up tommorrow September 02, 2014, 04:23:42 AM
cheers! BURST-Q4TR-YKRW-6RAN-EDBC8 you've been an amazing help, friend
ok i renamed it, it was giving a deadline still
after i removed it from the same directory it still says "targetdeadline" 75000 and no valid shares to submit to the pool, am I missing something?
And 7 sent to you
And the messages it gives are normal. Chill
edit: thank you for the Doge
September 02, 2014, 04:23:36 AM
Could anyone from you send me some burst for test the pool v2 ?
This is my address : BURST-UA4H-FQ2V-6JRK-6JF6B thanks .
This is my address : BURST-UA4H-FQ2V-6JRK-6JF6B thanks
.7 sent to you.
Thank you , when I will generate some burst I will send you back the 7 burst
. September 02, 2014, 04:20:29 AM
does this look right for pool mining? its just sitting there not doing anything else
It shouldn't say that there is no share to submit to pool. If you want to solo mine, delete the pool ip from the bat file
Everything else looks golden
When I was plotting I didnt always finish the plot so sometime the miner says
Error reading file
Does the miner use the nounces that are available or does it not use that file at all because it's not complete?
If it still mines with whats there I guess it doesnt matter.. if it just skips that file then I am wasting space
edit: exactly like the person above xD
Error reading file
Does the miner use the nounces that are available or does it not use that file at all because it's not complete?
If it still mines with whats there I guess it doesnt matter.. if it just skips that file then I am wasting space
edit: exactly like the person above xD
It still uses the files, you're ok.
Also, just tested and simlinks work.
what is the pools wallet address? one of the steps is to put it for recepient im assuming so i can receive coin but i cant find the wallet adress to enter in the rewardassignment.html
BURST-8NZ9-X6AX-72BK-2KFM2
i enter my passphrase and copy and paste that wallet for recipient
and get this error {"errorCode":5,"errorDescription":"Unknown account"}
What version is your wallet?
1.0.3 do i have to have 1 burst for it to work?
Oh. Yes, you do. Give me your address, I'll send you
cheers! BURST-Q4TR-YKRW-6RAN-EDBC8 you've been an amazing help, friend
ok i renamed it, it was giving a deadline still
after i removed it from the same directory it still says "targetdeadline" 75000 and no valid shares to submit to the pool, am I missing something?
September 02, 2014, 04:19:12 AM
Could anyone from you send me some burst for test the pool v2 ?
This is my address : BURST-UA4H-FQ2V-6JRK-6JF6B thanks .
This is my address : BURST-UA4H-FQ2V-6JRK-6JF6B thanks
.7 sent to you.
Jump to: