[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 1073.

pattitheonly

newbie

Activity: 26

Merit: 0

Quote from: fanepatent on September 02, 2014, 02:49:23 AM

Quote from: pattitheonly on September 02, 2014, 02:47:19 AM

I had a question. When i mine in the pool V2 and i plot files at the moment, is it possible to mine at these files?
I get no valid shares and shares the are successfully transferd to the pool.

So i'm ban from pool? Help me...i'm confused 😩

If you just started plotting with the new ID for pool v2, you need to let it run longer. After 2-300 Gb of plots you will start seeing shares at a smaller interval

Thanks :-).
I hat the same id for all of my plots, is that right?

burstcoin

sr. member

Activity: 280

Merit: 250

Quote from: jamoes on September 02, 2014, 02:51:09 AM

Quote from: newuser01 on September 02, 2014, 02:33:17 AM

I somehow managed to fork myself yesterday so missed mining all night

noticed something was wrong when the block after mine hadn't been found for over 6 hours

how is something like this even possible?

edit: increased size so maybe someone will see and if something needs to be done we can fix it before we have forks all over the place.

This was probably because the clock on your computer was wrong. It's best to make sure your OS has its time synced with the internet to make sure it stays accurate.

Could also be if he was using an old client. 1.0.2 rejects the correct chain since about 2 days ago.

Razerglass

legendary

Activity: 1036

Merit: 1000

https://bmy.guide

Quote from: fanepatent on September 02, 2014, 02:47:05 AM

Quote from: Razerglass on September 02, 2014, 02:45:42 AM

Quote from: fanepatent on September 02, 2014, 02:43:26 AM

Quote from: Razerglass on September 02, 2014, 02:37:56 AM

Quote from: fanepatent on September 02, 2014, 02:36:16 AM

Quote from: Razerglass on September 02, 2014, 02:30:21 AM

starting at plot 1 and stopping at plot 80000 is that going to use as much space as possible on my HDD? ( for maximum hdd hash rate)?

No. Like I stated earlier, thats only 2 Gb .80000 x 256 Kb.

ok i think im starting to understand! i see my harddrive space being used! and i noticed the plots folder! so once its done i could re run the command starting at 80001-160000 for another 2 GB? and it would write some more plots, yes?

Exactly

great! ok almost got it. curious about adding harddrives now. so lets say i attach some sata hdd's and format them ntsc and give them drive letters, how does it know to plot them on that particular harddrive. and how does it know to look there for my plots?

It doesn't know. You have to run a miner on each drive and start plotting where you left off on the first drive.
As for the miner, it scans the "plots" folder when the block changes. So it knows if there is a new file.

that would entail copying my whole pocminer folder to the drive and run the bat from it?.. so you would have x amount of mining windows open for x amount of drives?

so each miner would scan its own plot folder on each drive? being that each drive has a identical miner it knows where to send thecoins and what the other miners are doing?

jamoes

member

Activity: 89

Merit: 10

Quote from: newuser01 on September 02, 2014, 02:33:17 AM

I somehow managed to fork myself yesterday so missed mining all night

noticed something was wrong when the block after mine hadn't been found for over 6 hours

how is something like this even possible?

edit: increased size so maybe someone will see and if something needs to be done we can fix it before we have forks all over the place.

This was probably because the clock on your computer was wrong. It's best to make sure your OS has its time synced with the internet to make sure it stays accurate.

fanepatent

full member

Activity: 224

Merit: 100

Quote from: pattitheonly on September 02, 2014, 02:47:19 AM

I had a question. When i mine in the pool V2 and i plot files at the moment, is it possible to mine at these files?
I get no valid shares and shares the are successfully transferd to the pool.

So i'm ban from pool? Help me...i'm confused 😩

If you just started plotting with the new ID for pool v2, you need to let it run longer. After 2-300 Gb of plots you will start seeing shares at a smaller interval

pattitheonly

newbie

Activity: 26

Merit: 0

I had a question. When i mine in the pool V2 and i plot files at the moment, is it possible to mine at these files?
I get no valid shares and shares the are successfully transferd to the pool.

So i'm ban from pool? Help me...i'm confused 😩

fanepatent

full member

Activity: 224

Merit: 100

Quote from: Razerglass on September 02, 2014, 02:45:42 AM

Quote from: fanepatent on September 02, 2014, 02:43:26 AM

Quote from: Razerglass on September 02, 2014, 02:37:56 AM

Quote from: fanepatent on September 02, 2014, 02:36:16 AM

Quote from: Razerglass on September 02, 2014, 02:30:21 AM

starting at plot 1 and stopping at plot 80000 is that going to use as much space as possible on my HDD? ( for maximum hdd hash rate)?

No. Like I stated earlier, thats only 2 Gb .80000 x 256 Kb.

ok i think im starting to understand! i see my harddrive space being used! and i noticed the plots folder! so once its done i could re run the command starting at 80001-160000 for another 2 GB? and it would write some more plots, yes?

Exactly

great! ok almost got it. curious about adding harddrives now. so lets say i attach some sata hdd's and format them ntsc and give them drive letters, how does it know to plot them on that particular harddrive. and how does it know to look there for my plots?

It doesn't know. You have to run a miner on each drive and start plotting where you left off on the first drive.
As for the miner, it scans the "plots" folder when the block changes. So it knows if there is a new file.

Razerglass

legendary

Activity: 1036

Merit: 1000

https://bmy.guide

Quote from: fanepatent on September 02, 2014, 02:43:26 AM

Quote from: Razerglass on September 02, 2014, 02:37:56 AM

Quote from: fanepatent on September 02, 2014, 02:36:16 AM

Quote from: Razerglass on September 02, 2014, 02:30:21 AM

starting at plot 1 and stopping at plot 80000 is that going to use as much space as possible on my HDD? ( for maximum hdd hash rate)?

No. Like I stated earlier, thats only 2 Gb .80000 x 256 Kb.

ok i think im starting to understand! i see my harddrive space being used! and i noticed the plots folder! so once its done i could re run the command starting at 80001-160000 for another 2 GB? and it would write some more plots, yes?

Exactly

great! ok almost got it. curious about adding harddrives now. so lets say i attach some sata hdd's and format them ntsc and give them drive letters, how does it know to plot them on that particular harddrive. and how does it know to look there for my plots?

fanepatent

full member

Activity: 224

Merit: 100

Quote from: RUNNY on September 02, 2014, 02:43:01 AM

Quote from: fanepatent on September 02, 2014, 01:55:01 AM

Quote from: koko2530 on September 02, 2014, 01:49:57 AM

i have 4x2tb
i has create plots on first disk
can i copy plots to other disk ?
thanks

Yes you can. I am moving plots as we speak

move or copy?

I am moving them. Don't copy them, since you don't need to overlap the nonces. Generate from 0 to whatever your space is. But don't overlap them. Its useless.
2 miners running with the same plots will have the same result as one single miner.

fanepatent

full member

Activity: 224

Merit: 100

Quote from: Razerglass on September 02, 2014, 02:37:56 AM

Quote from: fanepatent on September 02, 2014, 02:36:16 AM

Quote from: Razerglass on September 02, 2014, 02:30:21 AM

starting at plot 1 and stopping at plot 80000 is that going to use as much space as possible on my HDD? ( for maximum hdd hash rate)?

No. Like I stated earlier, thats only 2 Gb .80000 x 256 Kb.

ok i think im starting to understand! i see my harddrive space being used! and i noticed the plots folder! so once its done i could re run the command starting at 80001-160000 for another 2 GB? and it would write some more plots, yes?

Exactly

timk225

hero member

Activity: 955

Merit: 1004

I finally figured out through a PM to the developer where my coins were going. I was logging into the wallet with the 12 word pass phrase instead of the short password I made up, therefore I had 2 accounts and didn't know it. I have 13,300 BURST coins. What's that worth in BTC these days? Might want to sell them for BTC.

RUNNY

sr. member

Activity: 251

Merit: 250

Quote from: fanepatent on September 02, 2014, 01:55:01 AM

Quote from: koko2530 on September 02, 2014, 01:49:57 AM

i have 4x2tb
i has create plots on first disk
can i copy plots to other disk ?
thanks

Yes you can. I am moving plots as we speak

move or copy?

Sglasio

full member

Activity: 224

Merit: 100

Who try use Raspberry Pi and more 4 HDD?

nonlinearboy

hero member

Activity: 703

Merit: 500

Quote from: DailyModo on September 02, 2014, 02:35:06 AM

Quote from: Depredation on September 02, 2014, 02:26:35 AM

Quote from: DailyModo on September 02, 2014, 02:23:50 AM

How many coins are mined up to now?

7775 total blocks mined x 10,000 burst per block = 77,750,000 burst

So that makes around 3.5M coin a day being mined?

it seems like that.

Razerglass

legendary

Activity: 1036

Merit: 1000

https://bmy.guide

Quote from: fanepatent on September 02, 2014, 02:36:16 AM

Quote from: Razerglass on September 02, 2014, 02:30:21 AM

starting at plot 1 and stopping at plot 80000 is that going to use as much space as possible on my HDD? ( for maximum hdd hash rate)?

No. Like I stated earlier, thats only 2 Gb .80000 x 256 Kb.

ok i think im starting to understand! i see my harddrive space being used! and i noticed the plots folder! so once its done i could re run the command starting at 80001-160000 for another 2 GB? and it would write some more plots, yes?

pattitheonly

newbie

Activity: 26

Merit: 0

Quote from: Razerglass on September 02, 2014, 02:30:21 AM

starting at plot 1 and stopping at plot 80000 is that going to use as much space as possible on my HDD? ( for maximum hdd hash rate)?

No, starting at 1 and plot to 50gb (your max free space on you hd).

fanepatent

full member

Activity: 224

Merit: 100

Quote from: Razerglass on September 02, 2014, 02:30:21 AM

starting at plot 1 and stopping at plot 80000 is that going to use as much space as possible on my HDD? ( for maximum hdd hash rate)?

No. Like I stated earlier, thats only 2 Gb .80000 x 256 Kb.

DailyModo

hero member

Activity: 812

Merit: 1000

www.gamebet.gg

Quote from: Depredation on September 02, 2014, 02:26:35 AM

Quote from: DailyModo on September 02, 2014, 02:23:50 AM

How many coins are mined up to now?

7775 total blocks mined x 10,000 burst per block = 77,750,000 burst

So that makes around 3.5M coin a day being mined?

newuser01

sr. member

Activity: 434

Merit: 250

I somehow managed to fork yesterday so I missed mining all night

I noticed something was wrong when the block after mine hadn't been found for over 6 hours

how is it possible to fork yet stay connected and be working on my own block for hours?
After a restart the wallet it downloaded the correct blockchain and one of my solved blocks disappeared

edit: increased size so maybe someone will see and if something needs to be done we can fix it before we have forks all over the place.

Razerglass

legendary

Activity: 1036

Merit: 1000

https://bmy.guide

starting at plot 1 and stopping at plot 80000 is that going to use as much space as possible on my HDD? ( for maximum hdd hash rate)?

Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 1073. (Read 2171083 times)