Author

Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 1266. (Read 2170889 times)

member
Activity: 94
Merit: 10
what happen when created plot generate done?

Then you just mine with them forever, plot size = hashrate

My HDDs are almost full, pc will go back into idle once i am done ^^

you mean the next time for mining dont need a generate plot only minig with run mine.bat and use with last plot?
hero member
Activity: 644
Merit: 500
what happens in you run out of room on hdd before plot is done Huh
newbie
Activity: 49
Merit: 0
my run generate file finished all the nonces some time last night
and I still have my miner running,
so far its been 24 hours since I started the whole thing running on a 200gb plot I would go bigger, but wanted to test
and no blocks yet
Sy
legendary
Activity: 1484
Merit: 1003
Bounty Detective
It would be nice if someone is able to confirm if mining is possible on the network mapped drives. Thx.

If the network is fast enough, sure.

It has been said that USB2.0 isn't so you should't try it on 100 mbit but 1 gbit should work.
Sy
legendary
Activity: 1484
Merit: 1003
Bounty Detective
what happen when created plot generate done?

Then you just mine with them forever, plot size = hashrate

My HDDs are almost full, pc will go back into idle once i am done ^^
sr. member
Activity: 532
Merit: 250
I still dont understand POC.
Can i mine this coin whit my PC?
member
Activity: 94
Merit: 10
what happen when created plot generate done?
member
Activity: 83
Merit: 10
It would be nice if someone is able to confirm if mining is possible on the network mapped drives. Thx.
hero member
Activity: 644
Merit: 500
what happens in you run out of room on hdd before plot is done Huh
Sy
legendary
Activity: 1484
Merit: 1003
Bounty Detective
I am mining with 3 drives:

Drive 1: 200GB plot: Found 8 blocks
Drive 2: 250GB plot: Found 2 blocks
Drive 3: 1 TB Drive, found 0 blocks, plot is still being generated.

Today another 4tb drive should be delivered on which i will experiment in generating fast plots. Have a idea for that but if this succeeds and many perople do this the diff will just increase.

how to see which drive found the block? thanks!
I think each drive has its own wallet.

Na, at least that's not how i am doing it, all miner run against one wallet - so no way to tell unless you look at them all the time but...does it matter? Cheesy

it matters! because i don't kown different computers run with the same wallet and different wallet's difference, like if you have two computer, pc1 and pc2, each have 100GB hdd, these wallets shares the same account, so , what hashrate did you get? 200GB's hashrate or 100GB’s hashrate + 100GB's hashrate?, for example, if your computer have a core with 4GHz and another computer have two core with 2GHz, which is the faster one?,
so am trouble with this a long time .and wallets in each computer, share the same account or different account have any difference? and if wallets in each computer share the same account with different nxt.myAddress has any confilict? is it the same as different computers just open one wallet? these are all matters! because i don't know how it works, i can't see any hash infomation, so i care these problems!

CPU speed doesnt matter for mining nor does ram, the miner runs with 1-2% cpu usage and 200 mb ram plus your plots only work for one address - just chill and wait.
full member
Activity: 238
Merit: 100
I am mining with 3 drives:

Drive 1: 200GB plot: Found 8 blocks
Drive 2: 250GB plot: Found 2 blocks
Drive 3: 1 TB Drive, found 0 blocks, plot is still being generated.

Today another 4tb drive should be delivered on which i will experiment in generating fast plots. Have a idea for that but if this succeeds and many perople do this the diff will just increase.

how to see which drive found the block? thanks!
I think each drive has its own wallet.

Na, at least that's not how i am doing it, all miner run against one wallet - so no way to tell unless you look at them all the time but...does it matter? Cheesy

it matters! because i don't kown different computers run with the same wallet and different wallet's difference, like if you have two computer, pc1 and pc2, each have 100GB hdd, these wallets shares the same account, so , what hashrate did you get? 200GB's hashrate or 100GB’s hashrate + 100GB's hashrate?, for example, if your computer have a core with 4GHz and another computer have two core with 2GHz, which is the faster one?,
so am trouble with this a long time .and wallets in each computer, share the same account or different account have any difference? and if wallets in each computer share the same account with different nxt.myAddress has any confilict? is it the same as different computers just open one wallet? these are all matters! because i don't know how it works, i can't see any hash infomation, so i care these problems!
legendary
Activity: 1232
Merit: 1001
Can plots be used for anything by the network?
hero member
Activity: 979
Merit: 510
A config file with paths to look into would be nice so you could run one miner over multiple drives... xD
Was already planning on doing that.

Cool, just looked into the source, Miner.java Line 108 - read an .ini and loop the paths, done.  Be prepared to get paths with whitespaces though Smiley

Hmm i might try to do this myself ^^ are there .jar build instructions somewhere?
I was going to do json config since I already am using a parser for that, but that works too.

If you're using linux:
sudo apt-get install openjdk-7-jdk
chmod +x compile.sh
and then to build just do:
./compile.sh

Cheers, JSON would work but i think it would just over-complicate things for my dirty hack ^^

Would be a nice feature!
Any instructions on what the ini can handle and if it works in Linux as well?
Sy
legendary
Activity: 1484
Merit: 1003
Bounty Detective
I am mining with 3 drives:

Drive 1: 200GB plot: Found 8 blocks
Drive 2: 250GB plot: Found 2 blocks
Drive 3: 1 TB Drive, found 0 blocks, plot is still being generated.

Today another 4tb drive should be delivered on which i will experiment in generating fast plots. Have a idea for that but if this succeeds and many perople do this the diff will just increase.

how to see which drive found the block? thanks!
I think each drive has its own wallet.

Na, at least that's not how i am doing it, all miner run against one wallet - so no way to tell unless you look at them all the time but...does it matter? Cheesy
hero member
Activity: 672
Merit: 500
I am mining with 3 drives:

Drive 1: 200GB plot: Found 8 blocks
Drive 2: 250GB plot: Found 2 blocks
Drive 3: 1 TB Drive, found 0 blocks, plot is still being generated.

Today another 4tb drive should be delivered on which i will experiment in generating fast plots. Have a idea for that but if this succeeds and many perople do this the diff will just increase.

how to see which drive found the block? thanks!
I think each drive has its own wallet.
full member
Activity: 238
Merit: 100
I am mining with 3 drives:

Drive 1: 200GB plot: Found 8 blocks
Drive 2: 250GB plot: Found 2 blocks
Drive 3: 1 TB Drive, found 0 blocks, plot is still being generated.

Today another 4tb drive should be delivered on which i will experiment in generating fast plots. Have a idea for that but if this succeeds and many perople do this the diff will just increase.

how to see which drive found the block? thanks!
member
Activity: 84
Merit: 10
I am mining with 3 drives:

Drive 1: 200GB plot: Found 8 blocks
Drive 2: 250GB plot: Found 2 blocks
Drive 3: 1 TB Drive, found 0 blocks, plot is still being generated.

Today another 4tb drive should be delivered on which i will experiment in generating fast plots. Have a idea for that but if this succeeds and many perople do this the diff will just increase.
member
Activity: 84
Merit: 10
Every time I got a block ,I found the deadline value is vey small ,have just found  a block with a deadline:422,  nomally it's value would be larger than 5000,   what's the meanning of deadline value ??

This value is good comparing to the current diff. Gives you more chance to claim/find the block.
The lower the better.
sr. member
Activity: 336
Merit: 250
Is there anyone who found blocks  in the last 24 hours with plots between 10gb and 100gb?
Thanks.
sr. member
Activity: 341
Merit: 250
I'm trying to generate my second plot, this time on my usb drive.
It has more than 500gb free.
I try to make a plot of around 200gb but after writing 1gb it gives me this error:

Quote
Generating from nonce: 829201
Writing from nonce 829201
Generating from nonce: 831201
Writing from nonce 831201
Generating from nonce: 833201
Writing from nonce 833201
Generating from nonce: 835201
Writing from nonce 835201
[ERROR] [08/13/2014 11:13:52.668] [default-akka.actor.default-dispatcher-9] [akk
a://default/user/$a] There is not enough space on the disk
java.io.IOException: There is not enough space on the disk
        at java.io.FileOutputStream.writeBytes(Native Method)
        at java.io.FileOutputStream.write(Unknown Source)
        at pocminer.GenerateSupr.onReceive(GenerateSupr.java:36)
        at akka.actor.UntypedActor$$anonfun$receive$1.applyOrElse(UntypedActor.s
cala:167)
        at akka.actor.Actor$class.aroundReceive(Actor.scala:465)
        at akka.actor.UntypedActor.aroundReceive(UntypedActor.scala:97)
        at akka.actor.ActorCell.receiveMessage(ActorCell.scala:516)
        at akka.actor.ActorCell.invoke(ActorCell.scala:487)
        at akka.dispatch.Mailbox.processMailbox(Mailbox.scala:238)
        at akka.dispatch.Mailbox.run(Mailbox.scala:220)
        at akka.dispatch.ForkJoinExecutorConfigurator$AkkaForkJoinTask.exec(Abst
ractDispatcher.scala:393)
        at scala.concurrent.forkjoin.ForkJoinTask.doExec(ForkJoinTask.java:260)
        at scala.concurrent.forkjoin.ForkJoinPool$WorkQueue.runTask(ForkJoinPool
.java:1339)
        at scala.concurrent.forkjoin.ForkJoinPool.runWorker(ForkJoinPool.java:19
79)
        at scala.concurrent.forkjoin.ForkJoinWorkerThread.run(ForkJoinWorkerThre
ad.java:107)

Generating from nonce: 819201

As you can see it goes back to the beginning.
it happened two times on the same nonce...
any idea what it might be?
Jump to: