[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 642.

DrTrouble

member

Activity: 111

Merit: 10

Quote from: burstcoin on October 14, 2014, 01:00:16 AM

Quote from: DrTrouble on October 14, 2014, 12:55:07 AM

Quote from: burstcoin on October 14, 2014, 12:37:36 AM

Quote from: DrTrouble on October 14, 2014, 12:10:03 AM

Quote from: Blago on October 13, 2014, 12:32:40 AM

Quote from: DrTrouble on October 12, 2014, 11:33:51 PM

I am looking for advice on how to speed up mining. I am using Blago's latest miner. The PC my HDDs are hooked up to is a Tri-core Phenom w/ 16GB RAM, CPU only maxes when new block is found. I have 4x 2TB HDs that all report around ~30sec while mining (SATA 6Gbps). Then I have 10TB via eSATA, and a different 10TB sitting on a FreeNAS ZFS share that I am hooked up to via Gigabit. The eSATA reports around ~80 sec to scan and the Gigabit ZFS typically gets ~130sec. My question is, how much am I missing with these 'high' times to submit? Also, is there anything I can do to improve given my setup? I will admit that I have several other high-powered PCs that could probably be utilized to mine the eSATA 10TB or the 10TB Gigabit setup, but I am not sure it would help.

Any thoughts, suggestions, or tweaks would be much appreciated...

I have 1 eSata-3 HDD, mining speed = 380Gb / 8 sec = 47.5 Gb/sec (not merged, not defrag), other HDDs mining speed = ~67 Gb/sec (merged, defrag).

Blago - where can I see those stats?

Does anyone else have any suggestions?

Uray's block explorer shows under stats that 5849 blocks(about 25%) have been 1-180 seconds. That's a little larger range than you're asking for, but I don't know of any other stats on this.

Most important things for read speed are using a high stagger size, and you want to be using 1 thread to read on each drive. With blago's miner this means 1 folder of plots per drive.

Excellent info - thanks dev! I am looking at Uray's Block Explorer located at http://burst.cryptoport.io/ - how did you determine that 25%? I can only see the latest 10 blocks and I am unsure of how to expand further...

My stagger size is optimized at 1049600 for most so that should not be an issue. I do have some that are optimized at 1048576. Before your post, I had these plots in different folders based on stagger size. After placing them in the same folder it cut down ~sec slightly so that is good.

I sure would be interested in narrowing down that range but it definitely gives me a starting point - thx!

If you click "Stat" at the top, it brings up another page with several graphs. If you hover your cursor over a bar in "Block Generation Time Distribution" it shows you the block count and range. I had to divide by the total blocks to get the %.

I see it now, thank you. Uray - would you mind divulging any more specific stats than 1-180? Man I gotta get these ~secs down...

burstcoin

sr. member

Activity: 280

Merit: 250

Quote from: DrTrouble on October 14, 2014, 12:55:07 AM

Quote from: burstcoin on October 14, 2014, 12:37:36 AM

Quote from: DrTrouble on October 14, 2014, 12:10:03 AM

Quote from: Blago on October 13, 2014, 12:32:40 AM

Quote from: DrTrouble on October 12, 2014, 11:33:51 PM

I am looking for advice on how to speed up mining. I am using Blago's latest miner. The PC my HDDs are hooked up to is a Tri-core Phenom w/ 16GB RAM, CPU only maxes when new block is found. I have 4x 2TB HDs that all report around ~30sec while mining (SATA 6Gbps). Then I have 10TB via eSATA, and a different 10TB sitting on a FreeNAS ZFS share that I am hooked up to via Gigabit. The eSATA reports around ~80 sec to scan and the Gigabit ZFS typically gets ~130sec. My question is, how much am I missing with these 'high' times to submit? Also, is there anything I can do to improve given my setup? I will admit that I have several other high-powered PCs that could probably be utilized to mine the eSATA 10TB or the 10TB Gigabit setup, but I am not sure it would help.

Any thoughts, suggestions, or tweaks would be much appreciated...

I have 1 eSata-3 HDD, mining speed = 380Gb / 8 sec = 47.5 Gb/sec (not merged, not defrag), other HDDs mining speed = ~67 Gb/sec (merged, defrag).

Blago - where can I see those stats?

Does anyone else have any suggestions?

Uray's block explorer shows under stats that 5849 blocks(about 25%) have been 1-180 seconds. That's a little larger range than you're asking for, but I don't know of any other stats on this.

Most important things for read speed are using a high stagger size, and you want to be using 1 thread to read on each drive. With blago's miner this means 1 folder of plots per drive.

Excellent info - thanks dev! I am looking at Uray's Block Explorer located at http://burst.cryptoport.io/ - how did you determine that 25%? I can only see the latest 10 blocks and I am unsure of how to expand further...

My stagger size is optimized at 1049600 for most so that should not be an issue. I do have some that are optimized at 1048576. Before your post, I had these plots in different folders based on stagger size. After placing them in the same folder it cut down ~sec slightly so that is good.

I sure would be interested in narrowing down that range but it definitely gives me a starting point - thx!

If you click "Stat" at the top, it brings up another page with several graphs. If you hover your cursor over a bar in "Block Generation Time Distribution" it shows you the block count and range. I had to divide by the total blocks to get the %.

DrTrouble

member

Activity: 111

Merit: 10

Quote from: burstcoin on October 14, 2014, 12:37:36 AM

Quote from: DrTrouble on October 14, 2014, 12:10:03 AM

Quote from: Blago on October 13, 2014, 12:32:40 AM

Quote from: DrTrouble on October 12, 2014, 11:33:51 PM

I am looking for advice on how to speed up mining. I am using Blago's latest miner. The PC my HDDs are hooked up to is a Tri-core Phenom w/ 16GB RAM, CPU only maxes when new block is found. I have 4x 2TB HDs that all report around ~30sec while mining (SATA 6Gbps). Then I have 10TB via eSATA, and a different 10TB sitting on a FreeNAS ZFS share that I am hooked up to via Gigabit. The eSATA reports around ~80 sec to scan and the Gigabit ZFS typically gets ~130sec. My question is, how much am I missing with these 'high' times to submit? Also, is there anything I can do to improve given my setup? I will admit that I have several other high-powered PCs that could probably be utilized to mine the eSATA 10TB or the 10TB Gigabit setup, but I am not sure it would help.

Any thoughts, suggestions, or tweaks would be much appreciated...

I have 1 eSata-3 HDD, mining speed = 380Gb / 8 sec = 47.5 Gb/sec (not merged, not defrag), other HDDs mining speed = ~67 Gb/sec (merged, defrag).

Blago - where can I see those stats?

Does anyone else have any suggestions?

Uray's block explorer shows under stats that 5849 blocks(about 25%) have been 1-180 seconds. That's a little larger range than you're asking for, but I don't know of any other stats on this.

Most important things for read speed are using a high stagger size, and you want to be using 1 thread to read on each drive. With blago's miner this means 1 folder of plots per drive.

Excellent info - thanks dev! I am looking at Uray's Block Explorer located at http://burst.cryptoport.io/ - how did you determine that 25%? I can only see the latest 10 blocks and I am unsure of how to expand further...

My stagger size is optimized at 1049600 for most so that should not be an issue. I do have some that are optimized at 1048576. Before your post, I had these plots in different folders based on stagger size. After placing them in the same folder it cut down ~sec slightly so that is good.

I sure would be interested in narrowing down that range but it definitely gives me a starting point - thx!

burstcoin

sr. member

Activity: 280

Merit: 250

Quote from: DrTrouble on October 14, 2014, 12:10:03 AM

Quote from: Blago on October 13, 2014, 12:32:40 AM

Quote from: DrTrouble on October 12, 2014, 11:33:51 PM

I am looking for advice on how to speed up mining. I am using Blago's latest miner. The PC my HDDs are hooked up to is a Tri-core Phenom w/ 16GB RAM, CPU only maxes when new block is found. I have 4x 2TB HDs that all report around ~30sec while mining (SATA 6Gbps). Then I have 10TB via eSATA, and a different 10TB sitting on a FreeNAS ZFS share that I am hooked up to via Gigabit. The eSATA reports around ~80 sec to scan and the Gigabit ZFS typically gets ~130sec. My question is, how much am I missing with these 'high' times to submit? Also, is there anything I can do to improve given my setup? I will admit that I have several other high-powered PCs that could probably be utilized to mine the eSATA 10TB or the 10TB Gigabit setup, but I am not sure it would help.

Any thoughts, suggestions, or tweaks would be much appreciated...

I have 1 eSata-3 HDD, mining speed = 380Gb / 8 sec = 47.5 Gb/sec (not merged, not defrag), other HDDs mining speed = ~67 Gb/sec (merged, defrag).

Blago - where can I see those stats?

Does anyone else have any suggestions?

Uray's block explorer shows under stats that 5849 blocks(about 25%) have been 1-180 seconds. That's a little larger range than you're asking for, but I don't know of any other stats on this.

Most important things for read speed are using a high stagger size, and you want to be using 1 thread to read on each drive. With blago's miner this means 1 folder of plots per drive.

DrTrouble

member

Activity: 111

Merit: 10

Quote from: Blago on October 13, 2014, 12:32:40 AM

Quote from: DrTrouble on October 12, 2014, 11:33:51 PM

I am looking for advice on how to speed up mining. I am using Blago's latest miner. The PC my HDDs are hooked up to is a Tri-core Phenom w/ 16GB RAM, CPU only maxes when new block is found. I have 4x 2TB HDs that all report around ~30sec while mining (SATA 6Gbps). Then I have 10TB via eSATA, and a different 10TB sitting on a FreeNAS ZFS share that I am hooked up to via Gigabit. The eSATA reports around ~80 sec to scan and the Gigabit ZFS typically gets ~130sec. My question is, how much am I missing with these 'high' times to submit? Also, is there anything I can do to improve given my setup? I will admit that I have several other high-powered PCs that could probably be utilized to mine the eSATA 10TB or the 10TB Gigabit setup, but I am not sure it would help.

Any thoughts, suggestions, or tweaks would be much appreciated...

I have 1 eSata-3 HDD, mining speed = 380Gb / 8 sec = 47.5 Gb/sec (not merged, not defrag), other HDDs mining speed = ~67 Gb/sec (merged, defrag).

Blago - where can I see those stats?

Does anyone else have any suggestions?

Nevril

member

Activity: 108

Merit: 10

Again the same no-strategy from the "investors":
Buy as much as you can, whatever the price --> Huge gap between buy/sell orders and no wall creation to sustain the price which falls after few minutes.

mmmaybe

sr. member

Activity: 462

Merit: 250

196 on Bittrex...? Undecided

Darthpotatoe

member

Activity: 271

Merit: 10

Quote from: crowetic on October 13, 2014, 03:21:49 PM

Quote from: crowetic on October 13, 2014, 03:20:42 PM

Quote from: SaSeIv on October 13, 2014, 02:49:55 PM

Quote from: crowetic on October 13, 2014, 09:09:34 AM

-ANNOUNCEMENT-

The pool at http://mine.burstcoin.info needs miners. There is also an asset you can buy into there that will provide you with extra income. The connection was killed at a very unfortunate time, and thus the pool lost quite a few of it's miners. Now I am going to do this in order to get some back! So, here goes...

The next 25 miners to join the pool, PM me with their burst address, and wait for me to see them on the list of stats on the pool, will be sent 1,500 burst!

The 25 after that to do the same thing, will receive 1,000 burst.

The 25 after that will receive 750 burst.

We will start with that, and see how it goes. I am more than willing to do more giveaways.

The pool server has been solid now for a good while since the incident with the storm, and we shouldn't be experiencing issues like that again. So, let's get our power back and become the pool that we can be!

**Note, I also have another pool that's unofficially related to this pool, but it's private and no fee, and located in the US. If you're interested in that pool you can PM me. Not sure how long it will stick around, or if I will merge with the other pool, it all depends on the miner count and blocks found, etc.**

BURST-46BJ-C98Y-GYVF-ETBHG

gotcha, as soon as I see ya in stats I'll send the 1500. Thanks for joining!

FYI everyone, this guy is number 18!

Thank you all for your support, keep em coming, and I'll keep em donating!

1500 sent

BURST-E6SH-JM2C-HENW-6WMSL

Irontiga

hero member

Activity: 588

Merit: 500

Quote from: uray on October 13, 2014, 08:19:01 PM

huge buy order on c-cex, what happen?

Good things Wink

ajw7989

legendary

Activity: 924

Merit: 1000

Quote from: crowetic on October 13, 2014, 02:31:46 PM

Quote from: mig6r on October 13, 2014, 02:26:20 PM

Quote from: xuser on October 13, 2014, 02:06:59 PM

Just set my account, BURST-BWJ6-KJFE-M3CP-4XYW6

Quote from: crowetic on October 13, 2014, 12:45:15 PM

Quote from: DrTrouble on October 13, 2014, 12:35:11 PM

Quote from: crowetic on October 13, 2014, 12:29:13 PM

Quote from: go6ooo1212 on October 13, 2014, 12:22:09 PM

Quote from: crowetic on October 13, 2014, 09:09:34 AM

-ANNOUNCEMENT-

The pool at http://mine.burstcoin.info needs miners. There is also an asset you can buy into there that will provide you with extra income. The connection was killed at a very unfortunate time, and thus the pool lost quite a few of it's miners. Now I am going to do this in order to get some back! So, here goes...

The next 25 miners to join the pool, PM me with their burst address, and wait for me to see them on the list of stats on the pool, will be sent 1,500 burst!

The 25 after that to do the same thing, will receive 1,000 burst.

The 25 after that will receive 750 burst.

We will start with that, and see how it goes. I am more than willing to do more giveaways.

The pool server has been solid now for a good while since the incident with the storm, and we shouldn't be experiencing issues like that again. So, let's get our power back and become the pool that we can be!

**Note, I also have another pool that's unofficially related to this pool, but it's private and no fee, and located in the US. If you're interested in that pool you can PM me. Not sure how long it will stick around, or if I will merge with the other pool, it all depends on the miner count and blocks found, etc.**

Just set my account , already PMd you my address...

Got the PM thanks I already sent you your 1500!

Just so that everyone knows there are 13 people already taken me up on my giveaway, that means 12 left for the 1500.

Maybe if I'm feeling nice after the first 25, I'll do 1500 for the next 25 as well. We'll see how it goes!

Thank you everyone!

I'll give your pool another shot...sending 25TB your way...

Much appreciated good sir. I am going on my lunch break at work right now, so I will be gone for an hour or so, so don't think I disappeared, I'm still here, just at lunch, and I will reply when I get back to anyone who messages me during my lunch, check the stats then send payments for all who took me up on my offer. Thanks!

Just set my reassignement to test your pool Cool

Make sure to PM me your burst address because I don't have access to the pool's wallet. Thanks!

PMED hopefully I made it for the 1500 burst giveaway!

Cryptour

full member

Activity: 126

Merit: 100

Quote from: uray on October 13, 2014, 08:19:01 PM

huge buy order on c-cex, what happen?

Getting ready for take off.

uray

hero member

Activity: 1400

Merit: 505

huge buy order on c-cex, what happen?

bathrobehero

legendary

Activity: 2002

Merit: 1051

ICO? Not even once.

After using the plot merger I only get huge deadlines like 2 months or so with both of the C miners, with 4.6 TB. Staggersize is 768000 (x_1_768000_768000). What am I missing?

paradigmflux

sr. member

Activity: 378

Merit: 254

small fry

Quote from: Palad1n on October 12, 2014, 08:15:11 PM

Quote from: crazyearner on October 12, 2014, 08:11:52 PM

Quote from: Palad1n on October 12, 2014, 07:29:25 PM

Hey miners ))
burstmultipool.com wrote this: So far this shift you have earned: 1204.65471500000000005 BURST (estimate).

And as a result the payment does not come for the few day. Somebody mined on this multipool and how to pay this pool?

No idea fella am mining their also wating to hear when payments done but am assuming its done after sell orders been done on cryptsy and then bought into burst and converted into Burst and then sent to miners

Thanks, crazyearner.
And how long did you wait after mining your payment?

Hey guys,
Payouts are just waiting on a BTC withdrawal from Cryptsy to Polo to buy BURST

Palad1n

member

Activity: 113

Merit: 10

Quote from: crazyearner

I only just started their so going to see how long it is. Its a multi pool so its factors beyond our control if it on auto pilot it needs to sell the cryptos its mined from our side then sell on cryptsy then come back buy burst and give in exchange could be 24 hours could be longer depending on how fast rounds are and how quick it is at selling

OK. Remains therefore only wait...

uray

hero member

Activity: 1400

Merit: 505

Quote from: Cryptour on October 13, 2014, 05:11:01 PM

What's the progress on these following plans;
Advanced transactions(escrow, subscription, reserve funds then transfer not yet known portion later)
BurstId authentication system
Allow linking BurstId to burst account for transfers with spending limits.
DHT for off-chain services
Off-chain encrypted messaging and voip between burstid accounts
File storage(disclaimer: still figuring out a good way to do this. this will take a while.)

escrow is done, others are in progress

crowetic

legendary

Activity: 2282

Merit: 1072

https://crowetic.com | https://qortal.org

Person above me sent ^^^ Wink

There are only 3 left on the 1500 mark.

I will be gone in about 20 min, but keep sending me addresses and I will do all payouts later or tomorrow morning when I get back in.

Thanks!

ltcnim

legendary

Activity: 914

Merit: 1001

Quote from: crowetic on October 13, 2014, 04:18:16 PM

Quote from: thernady on October 13, 2014, 03:45:52 PM

Quote from: crowetic on October 13, 2014, 03:21:49 PM

Quote from: crowetic on October 13, 2014, 03:20:42 PM

Quote from: SaSeIv on October 13, 2014, 02:49:55 PM

Quote from: crowetic on October 13, 2014, 09:09:34 AM

-ANNOUNCEMENT-

The pool at http://mine.burstcoin.info needs miners. There is also an asset you can buy into there that will provide you with extra income. The connection was killed at a very unfortunate time, and thus the pool lost quite a few of it's miners. Now I am going to do this in order to get some back! So, here goes...

The next 25 miners to join the pool, PM me with their burst address, and wait for me to see them on the list of stats on the pool, will be sent 1,500 burst!

The 25 after that to do the same thing, will receive 1,000 burst.

The 25 after that will receive 750 burst.

We will start with that, and see how it goes. I am more than willing to do more giveaways.

The pool server has been solid now for a good while since the incident with the storm, and we shouldn't be experiencing issues like that again. So, let's get our power back and become the pool that we can be!

**Note, I also have another pool that's unofficially related to this pool, but it's private and no fee, and located in the US. If you're interested in that pool you can PM me. Not sure how long it will stick around, or if I will merge with the other pool, it all depends on the miner count and blocks found, etc.**

BURST-46BJ-C98Y-GYVF-ETBHG

gotcha, as soon as I see ya in stats I'll send the 1500. Thanks for joining!

FYI everyone, this guy is number 18!

Thank you all for your support, keep em coming, and I'll keep em donating!

1500 sent

i try your pool
BURST-HYYZ-56YY-KAFB-68UVK

1500 sent.

THIS IS THE 19TH PERSON

well, guess everyone deserves a 2nd chance

I'm in:

EVXX-L5NF-NSY5-4P7F3

Cryptour

full member

Activity: 126

Merit: 100

What's the progress on these following plans;
Advanced transactions(escrow, subscription, reserve funds then transfer not yet known portion later)
BurstId authentication system
Allow linking BurstId to burst account for transfers with spending limits.
DHT for off-chain services
Off-chain encrypted messaging and voip between burstid accounts
File storage(disclaimer: still figuring out a good way to do this. this will take a while.)

crowetic

legendary

Activity: 2282

Merit: 1072

https://crowetic.com | https://qortal.org

Quote from: thernady on October 13, 2014, 03:45:52 PM

Quote from: crowetic on October 13, 2014, 03:21:49 PM

Quote from: crowetic on October 13, 2014, 03:20:42 PM

Quote from: SaSeIv on October 13, 2014, 02:49:55 PM

Quote from: crowetic on October 13, 2014, 09:09:34 AM

-ANNOUNCEMENT-

The pool at http://mine.burstcoin.info needs miners. There is also an asset you can buy into there that will provide you with extra income. The connection was killed at a very unfortunate time, and thus the pool lost quite a few of it's miners. Now I am going to do this in order to get some back! So, here goes...

The next 25 miners to join the pool, PM me with their burst address, and wait for me to see them on the list of stats on the pool, will be sent 1,500 burst!

The 25 after that to do the same thing, will receive 1,000 burst.

The 25 after that will receive 750 burst.

We will start with that, and see how it goes. I am more than willing to do more giveaways.

The pool server has been solid now for a good while since the incident with the storm, and we shouldn't be experiencing issues like that again. So, let's get our power back and become the pool that we can be!

**Note, I also have another pool that's unofficially related to this pool, but it's private and no fee, and located in the US. If you're interested in that pool you can PM me. Not sure how long it will stick around, or if I will merge with the other pool, it all depends on the miner count and blocks found, etc.**

BURST-46BJ-C98Y-GYVF-ETBHG

gotcha, as soon as I see ya in stats I'll send the 1500. Thanks for joining!

FYI everyone, this guy is number 18!

Thank you all for your support, keep em coming, and I'll keep em donating!

1500 sent

i try your pool
BURST-HYYZ-56YY-KAFB-68UVK

1500 sent.

THIS IS THE 19TH PERSON

Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 642. (Read 2171078 times)