[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 701.

pattitheonly

newbie

Activity: 26

Merit: 0

Quote from: burstcoin on September 29, 2014, 06:46:54 PM

Quote from: pattitheonly on September 29, 2014, 06:35:37 PM

Quote from: Irontiga on September 29, 2014, 06:13:34 PM

Quote from: pattitheonly on September 29, 2014, 05:26:05 PM

Quote from: Irontiga on September 29, 2014, 05:01:13 PM

Quote from: pattitheonly on September 29, 2014, 04:54:28 PM

Hi Miners,

i had some questions, the answers i don't found in the forum or here.
What is the best configuration on a Xeon server with 5 x 4TB?

I had 128GB Ram. So i so verry confused about plotsize and staggersize.

How could i exactly calculate the plotsize? Is it important, that the value must divideable through 256?

Could someone help me with the calculation?

File 1: wplotgenerator xx 0 14200000 20096 4 /async
File 2: wplotgenerator xx 14200001 28400001 20096 4 /async

Is this a correct calculation? Is it better to do this with a staggersize of 40000 or 60000? An is this only important for the generation? Or when i then use 5 Miners, so i require 5 x staggersize?

I realy confused...sorry for the basics questions...

1 nonce = 256kb. Stagger the higher the better for your disks.

Is this only for the generation important?

The higher stagger the better for your disks when mining.

Why is this overlapping?

xx_0_14423040_240384
xx_14423040_29086464_240384
xx_29086464_43749888_240384

it confuse me...is somewhere a tool to do the exact plots?

Because the 2nd plot is 29086464 nonces starting on 14423040 is the range 14423040 - 43509503, which goes past the start of the next file.

omg...i see it...its to late...

burstcoin

sr. member

Activity: 280

Merit: 250

Quote from: pattitheonly on September 29, 2014, 06:35:37 PM

Quote from: Irontiga on September 29, 2014, 06:13:34 PM

Quote from: pattitheonly on September 29, 2014, 05:26:05 PM

Quote from: Irontiga on September 29, 2014, 05:01:13 PM

Quote from: pattitheonly on September 29, 2014, 04:54:28 PM

Hi Miners,

i had some questions, the answers i don't found in the forum or here.
What is the best configuration on a Xeon server with 5 x 4TB?

I had 128GB Ram. So i so verry confused about plotsize and staggersize.

How could i exactly calculate the plotsize? Is it important, that the value must divideable through 256?

Could someone help me with the calculation?

File 1: wplotgenerator xx 0 14200000 20096 4 /async
File 2: wplotgenerator xx 14200001 28400001 20096 4 /async

Is this a correct calculation? Is it better to do this with a staggersize of 40000 or 60000? An is this only important for the generation? Or when i then use 5 Miners, so i require 5 x staggersize?

I realy confused...sorry for the basics questions...

1 nonce = 256kb. Stagger the higher the better for your disks.

Is this only for the generation important?

The higher stagger the better for your disks when mining.

Why is this overlapping?

xx_0_14423040_240384
xx_14423040_29086464_240384
xx_29086464_43749888_240384

it confuse me...is somewhere a tool to do the exact plots?

Because the 2nd plot is 29086464 nonces starting on 14423040 is the range 14423040 - 43509503, which goes past the start of the next file.

uray

hero member

Activity: 1400

Merit: 505

Quote from: remulan on September 29, 2014, 06:21:23 PM

Quote from: remulan on September 29, 2014, 06:15:30 PM

Uray Looks like your pool in down ...
Minner:

Code:

Submission Max Delay : 30
Submission Max Retry : 5
Buffer Size : 4096MB
Pool Host : burst-pool2.cryptoport.io port 80
resolving hostname burst-pool2.cryptoport.io
Remote IP 54.169.43.72
unable to connect to remote host
unable to connect to remote host
unable to connect to remote host
unable to connect to remote host
unable to connect to remote host

site also in down

looks the pool fixed now, thanks

sorry i need to stop it a moment, because there are some residual payment got stuck, and it take longer than I expected (about 2 block time), and i made slight adjustment to pool settings

now US and SG pool has different share value curve, you can compare it on "How It Works" tab, you can choose which one is more preferable to your mining capacity.

FYI geographical location for mining does not have any effect on burst, unlike usual PoW mining when we are submitting more nonce as possible (quantity), on burst we look for nonce "Quality" so if you are on US or EU and using SG pool does not have any effect on your earning

cryptoport has two pools (US & SG), US pool curve is less "steep" than SG pool, curve which has less steep is preferable for "small" capacity miner as it will reward you better, as pool with high steep will reward high capacity better because nonce with small deadline has exponentially better share value

I am planning to make one more pool in EU, it will has linear curve, but with deadline limit, so miner will have 3 options soon

US : for miner who prefer steady earning and want their low deadline rewarded better

SG : for miner who love surprise earning just like on solo mining

EU : for conventional miner who love steady & fairness above anything

planned EU curve, graph above show deadline limit at 6120 seconds, it just for example, the actual will use higher deadline about 75000 seconds or so

pattitheonly

newbie

Activity: 26

Merit: 0

Quote from: Irontiga on September 29, 2014, 06:13:34 PM

Quote from: pattitheonly on September 29, 2014, 05:26:05 PM

Quote from: Irontiga on September 29, 2014, 05:01:13 PM

Quote from: pattitheonly on September 29, 2014, 04:54:28 PM

Hi Miners,

i had some questions, the answers i don't found in the forum or here.
What is the best configuration on a Xeon server with 5 x 4TB?

I had 128GB Ram. So i so verry confused about plotsize and staggersize.

How could i exactly calculate the plotsize? Is it important, that the value must divideable through 256?

Could someone help me with the calculation?

File 1: wplotgenerator xx 0 14200000 20096 4 /async
File 2: wplotgenerator xx 14200001 28400001 20096 4 /async

Is this a correct calculation? Is it better to do this with a staggersize of 40000 or 60000? An is this only important for the generation? Or when i then use 5 Miners, so i require 5 x staggersize?

I realy confused...sorry for the basics questions...

1 nonce = 256kb. Stagger the higher the better for your disks.

Is this only for the generation important?

The higher stagger the better for your disks when mining.

Why is this overlapping?

xx_0_14423040_240384
xx_14423040_29086464_240384
xx_29086464_43749888_240384

it confuse me...is somewhere a tool to do the exact plots?

remulan

member

Activity: 71

Merit: 10

Quote from: remulan on September 29, 2014, 06:15:30 PM

Uray Looks like your pool in down ...
Minner:

Code:

Submission Max Delay : 30
Submission Max Retry : 5
Buffer Size : 4096MB
Pool Host : burst-pool2.cryptoport.io port 80
resolving hostname burst-pool2.cryptoport.io
Remote IP 54.169.43.72
unable to connect to remote host
unable to connect to remote host
unable to connect to remote host
unable to connect to remote host
unable to connect to remote host

site also in down

looks the pool fixed now, thanks

Irontiga

hero member

Activity: 588

Merit: 500

PEOPLE, does someone have a higher res burst "B" or the skills to make it again in a higher resolution?

remulan

member

Activity: 71

Merit: 10

Uray Looks like your pool in down ...
Minner:

Code:

Submission Max Delay : 30
Submission Max Retry : 5
Buffer Size : 4096MB
Pool Host : burst-pool2.cryptoport.io port 80
resolving hostname burst-pool2.cryptoport.io
Remote IP 54.169.43.72
unable to connect to remote host
unable to connect to remote host
unable to connect to remote host
unable to connect to remote host
unable to connect to remote host

site also in down

Irontiga

hero member

Activity: 588

Merit: 500

Quote from: pattitheonly on September 29, 2014, 05:26:05 PM

Quote from: Irontiga on September 29, 2014, 05:01:13 PM

Quote from: pattitheonly on September 29, 2014, 04:54:28 PM

Hi Miners,

i had some questions, the answers i don't found in the forum or here.
What is the best configuration on a Xeon server with 5 x 4TB?

I had 128GB Ram. So i so verry confused about plotsize and staggersize.

How could i exactly calculate the plotsize? Is it important, that the value must divideable through 256?

Could someone help me with the calculation?

File 1: wplotgenerator xx 0 14200000 20096 4 /async
File 2: wplotgenerator xx 14200001 28400001 20096 4 /async

Is this a correct calculation? Is it better to do this with a staggersize of 40000 or 60000? An is this only important for the generation? Or when i then use 5 Miners, so i require 5 x staggersize?

I realy confused...sorry for the basics questions...

1 nonce = 256kb. Stagger the higher the better for your disks.

Is this only for the generation important?

The higher stagger the better for your disks when mining.

Irontiga

hero member

Activity: 588

Merit: 500

Only 447 Hardinvest left, get your buy order's in before it's too late Wink

fivebells

sr. member

Activity: 462

Merit: 250

Timk, please go tell everyone on the bittrex trollbox about your terrible experiences with burst. If you can get it below 100s in the next week, I'll give you 10k more burst.

dcct

sr. member

Activity: 280

Merit: 250

Quote from: Irontiga on September 29, 2014, 05:44:42 PM

Really, that's some tough math!!

Code:

$ (800 > 500)
true

Hmm. Computer says true. Maybe its wrong. Huh

Irontiga

hero member

Activity: 588

Merit: 500

Quote from: dcct on September 29, 2014, 05:42:18 PM

Quote from: Nevril on September 29, 2014, 05:27:39 PM

I know this can be really, really difficult to understand but: 800 > 500

.....

Nu'ff said.

Really, that's some tough math!!

crowetic

legendary

Activity: 2282

Merit: 1072

https://crowetic.com | https://qortal.org

Quote from: timk225 on September 29, 2014, 05:16:08 PM

You people still trying to mine this crapcoin? LOL. I have had the most stress-free week ever. No fighting with mining PCs, no constantly checking this forum topic, no coming home from work to see NO new coins in my account, etc.

My 10900-whatever coins are waiting in C-CEX for a price pop to be sold off, although I maintain that this crapcoin will never get over 500 satoshis again. It is only the deluded idiots here that are keeping the price as high as it is.

My 10900 coins are for sale at 800 satoshis EACH.

you ARE aware, that you're directly contradicting yourself here right?

First you say that you don't think the price will ever go above 500 (which is purely idiotic to think, if you look at the markets, it's pretty blatant, even to someone like me who doesn't know a shit ton about charts, that the price is going to go higher than 500, easily. In fact, the new base should be close around 500.)

Then you say, you're selling at 800, so by your own admission, you would say that your sale will never happen, right?

Once again, please tell me why you are here, if this is your thought on the coin?

AFN

newbie

Activity: 37

Merit: 0

Quote from: timk225 on September 29, 2014, 05:16:08 PM

You people still trying to mine this crapcoin? LOL. I have had the most stress-free week ever. No fighting with mining PCs, no constantly checking this forum topic, no coming home from work to see NO new coins in my account, etc.

My 10900-whatever coins are waiting in C-CEX for a price pop to be sold off, although I maintain that this crapcoin will never get over 500 satoshis again. It is only the deluded idiots here that are keeping the price as high as it is.

My 10900 coins are for sale at 800 satoshis EACH

timk225 - our director of marketing. Bad PR is good PR.

dcct

sr. member

Activity: 280

Merit: 250

Quote from: Nevril on September 29, 2014, 05:27:39 PM

I know this can be really, really difficult to understand but: 800 > 500

.....

Nu'ff said.

Nevril

member

Activity: 108

Merit: 10

Quote from: timk225 on September 29, 2014, 05:16:08 PM

You people still trying to mine this crapcoin? LOL. I have had the most stress-free week ever. No fighting with mining PCs, no constantly checking this forum topic, no coming home from work to see NO new coins in my account, etc.

My 10900-whatever coins are waiting in C-CEX for a price pop to be sold off, although I maintain that this crapcoin will never get over 500 satoshis again. It is only the deluded idiots here that are keeping the price as high as it is.

My 10900 coins are for sale at 800 satoshis EACH.

I know this can be really, really difficult to understand but: 800 > 500

.....

uray

hero member

Activity: 1400

Merit: 505

Quote from: timk225 on September 29, 2014, 05:16:08 PM

You people still trying to mine this crapcoin? LOL. I have had the most stress-free week ever. No fighting with mining PCs, no constantly checking this forum topic, no coming home from work to see NO new coins in my account, etc.

My 10900-whatever coins are waiting in C-CEX for a price pop to be sold off, although I maintain that this crapcoin will never get over 500 satoshis again. It is only the deluded idiots here that are keeping the price as high as it is.

My 10900 coins are for sale at 800 satoshis EACH.

as you said burst is crap coin, why dont you sell it for 1 satoshi each ? well its crap coin right? it has no value!

pattitheonly

newbie

Activity: 26

Merit: 0

Quote from: Irontiga on September 29, 2014, 05:01:13 PM

Quote from: pattitheonly on September 29, 2014, 04:54:28 PM

Hi Miners,

i had some questions, the answers i don't found in the forum or here.
What is the best configuration on a Xeon server with 5 x 4TB?

I had 128GB Ram. So i so verry confused about plotsize and staggersize.

How could i exactly calculate the plotsize? Is it important, that the value must divideable through 256?

Could someone help me with the calculation?

File 1: wplotgenerator xx 0 14200000 20096 4 /async
File 2: wplotgenerator xx 14200001 28400001 20096 4 /async

Is this a correct calculation? Is it better to do this with a staggersize of 40000 or 60000? An is this only important for the generation? Or when i then use 5 Miners, so i require 5 x staggersize?

I realy confused...sorry for the basics questions...

1 nonce = 256kb. Stagger the higher the better for your disks.

Is this only for the generation important?

timk225

hero member

Activity: 955

Merit: 1004

You people still trying to mine this crapcoin? LOL. I have had the most stress-free week ever. No fighting with mining PCs, no constantly checking this forum topic, no coming home from work to see NO new coins in my account, etc.

My 10900-whatever coins are waiting in C-CEX for a price pop to be sold off, although I maintain that this crapcoin will never get over 500 satoshis again. It is only the deluded idiots here that are keeping the price as high as it is.

My 10900 coins are for sale at 800 satoshis EACH.

uray

hero member

Activity: 1400

Merit: 505

Cryptoport Pool Update

I am developing a system that allows you to sell share of your mining capacity on my pool, to do this :

your account should be mining at burst-pool.cryptoport.io or burst-pool2.cryptoport.io
issue an asset in asset exchange using that account, and set your asset description with exactly "cryptoport capacity lease asset" (without quote) , you can name your asset anything you want, how many as you want, and set the price anything you like on asset exchange
pool will check if a miner has an asset issued with description as above, if it is then their mining payout will be distributed proportionally to that asset holder

this feature will allows people to mine burst without doing technical job, like plotting, maintaining disk, install wallet & miner etc and less risk for them, all their need is to buy some mining share anytime they want from anyone providing this asset, and if they think they want to stop mining just re-sell that asset anytime they want

issuer can also improve this mechanism that allows for renting and leasing mining capacity, by playing with "buy-back" buy order, if their renting time is out

this feature will be available soon, I announce it to promote BCPT [ Asset ID 12791182347560578640 ] and as an assurance to BCPT holder that I keep developing and make better service & feature for the pool to make pool more profitable

I will make another announcement when this feature is ready

please post any question or suggestion to my own pool thread here :
https://bitcointalksearch.org/topic/pool-poolburstcoinio-no-deadline-limit-instant-payout-769473

Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 701. (Read 2171056 times)