[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 887.

deevilknight

jr. member

Activity: 37

Merit: 10

Quote from: taaku on September 10, 2014, 09:41:21 AM

Quote from: deevilknight on September 10, 2014, 09:37:48 AM

Can someone explain me something about creating plots. I have 3 computers and each one of them has 2TB HDD. So i start creating plots with first 2TB HDD drive, and i start from 0 to 7200000 After it finish, when i start creating plots on secend HDD on my different computers, do i need to start again from 0 to 7200000, or continue from 7200000 to 14400000? I want to mine on pool not solo. Thanks in advance.

7200000 to 14400000

That's big help. Thank you on answer.

timk225

hero member

Activity: 955

Merit: 1004

Quote from: AnonymousEconomist on September 10, 2014, 06:30:07 AM

If we can get BURST on Bittrex as it heads toward the end of the wedge, we could see a really nice breakout.

Or it could go into an unrestrained lumpkin dive......

crowetic

legendary

Activity: 2282

Merit: 1072

https://crowetic.com | https://qortal.org

Quote from: ?? on ??

Did someone get a payout from burstmultipool.com? I have been mining for one day now and no payout.

STILL NO PAYOUT HERE, AND MY BALANCE IS RAPIDLY APPROACHING 5500 BURST...

Any word from paradigm about this?

I want to keep my 900GH SHA there, but I can't if I am not getting paid.

Thanks!

fanepatent

full member

Activity: 224

Merit: 100

Quote from: cad_cdn on September 10, 2014, 09:18:00 AM

a lot of complaining...
a lot of demanding...
a lot of asking the same questions over and over...
a lot of whining...
a lot of asking the same questions over and over...

1. Thanks to dev, and ALL those others making web sites, web pages, tools, custom apps, drivers, answering the same questions over and over etc.
2. People, read the tutorials, search the threads for answers to your questions before you post
3. If You have not contributed anything to the coin or the community, you have no right to demand, complain, or whine.

In it's simplest sense, as someone outside looking in might see -

it looks and sounds like 'we all got something for free' and then are 'demanding and complaining about it'

once again, thx dev and all the contributors.

I want to say a word about #2 there. Its hard to search 400+ pages for something you might miss. I am one of the guys at #1. I posted over 200 posts on this thread alone, helping others.
Someone offered a place to move all this. A place were it can be organized, were new people can find what they are looking for.
Someone made our own forum.
http://burstforum.com/
Otherwise we will have the same discussions over and over again, and the important stuff will get buried beneath tons of posts that can be avoided.

taaku

full member

Activity: 145

Merit: 100

Quote from: deevilknight on September 10, 2014, 09:37:48 AM

Can someone explain me something about creating plots. I have 3 computers and each one of them has 2TB HDD. So i start creating plots with first 2TB HDD drive, and i start from 0 to 7200000 After it finish, when i start creating plots on secend HDD on my different computers, do i need to start again from 0 to 7200000, or continue from 7200000 to 14400000? I want to mine on pool not solo. Thanks in advance.

7200000 to 14400000

timk225

hero member

Activity: 955

Merit: 1004

Quote from: fanepatent on September 10, 2014, 02:11:32 AM

Quote from: timk225 on September 10, 2014, 01:54:06 AM

Quote from: BurstBurst on September 09, 2014, 11:59:28 PM

Just got my 8 pieces of 5TB (Seagate) and started plotting now. With GPU Plotter, I'm should be able to complete 40TB PLOT in a week.

Should get 28000 BURST per day next week onward so with current rate I'm should get 0.112 BTC per day just purely by POC.

ROI should be 30 days from next week.

. Happy POC.

You have failed to take into account the major price crash coming this weekend when serious problems are revealed in the POC algorithm.

What are you talking about?
When you state something like this you better have proof to back up your claims.
There are no problems with the PoC algo.

I'm referring to the back line faults in the Java code that allow hackers to basically reroute mining coins to their own wallets. It's a fairly well known Java fault, but only in this coin mining case is it useful for anything, so I'm not surprised it was never heard of for the most part until now.

deevilknight

jr. member

Activity: 37

Merit: 10

Can someone explain me something about creating plots. I have 3 computers and each one of them has 2TB HDD. So i start creating plots with first 2TB HDD drive, and i start from 0 to 7200000 After it finish, when i start creating plots on secend HDD on my different computers, do i need to start again from 0 to 7200000, or continue from 7200000 to 14400000? I want to mine on pool not solo. Thanks in advance.

Sglasio

full member

Activity: 224

Merit: 100

i have Radeon R9 280x Vapor-X and try run 409600 nonces + stagger 4096 but i have error (((
If i run 1024 then ok, but any action with GPU (run GPUz or video) do crash driver (((
Driver 13.12 + patch + SDK 2.9
An OpenCL error occured in the generation process, aborting.
>>> [-61] Unable to create the OpenCL GPU generation buffer

tibolt

full member

Activity: 138

Merit: 100

which pool is better? official or unofficial?

crowetic

legendary

Activity: 2282

Merit: 1072

https://crowetic.com | https://qortal.org

Quote from: fanepatent on September 09, 2014, 09:53:49 PM

Guys, someone made a forum just for us. Why don't we start moving discussions there where they can be split by categories.
http://burstforum.com
Instead of just flooding one single thread, we can flood an entire forum

Just kidding.
The idea is that it will be easier to follow since all the problems will be in the support area, announcements in announcements and so on. People would find things a lot easier.

I joined the forum, I like it, well done mod!

coin1974

newbie

Activity: 46

Merit: 0

Quote from: LivsUA on September 10, 2014, 09:21:07 AM

THANKS! I had figured out it few minutes ago Cheesy

Before this post Cheesy

That's cool, glad you get it working. Happy mining

unsoindovo

legendary

Activity: 1932

Merit: 1042

https://locktrip.com/?refId=40964

Quote from: dcct on September 10, 2014, 08:22:57 AM

Quote from: alphateam on September 10, 2014, 08:19:36 AM

Quote from: dcct on September 10, 2014, 08:05:08 AM

Quote from: vaxman on September 10, 2014, 08:02:57 AM

Not if you are solo mining and have the Burst-Client (wallet) running.
My client has transferred ~2 GB in 24 hours, as can be seen in the "Peers" section.
That equals a bandwidth of 23 KBytes/s or ~ 200 kbit/s, 90% of that outgoing.

If you are pool mining and don't have the Client running, its much less.

Something is wrong there.
Here its 137 MB down/42MB up in ~3 days with 20TB+ solo-mining.

Did you find block with this 20TB, on?

Sure.

what is your configuration?

5HD 4TB each and 5 miners active, one for each HD?
or just a big 20TB JBOD or something else with just one miner active?

thank you!!

LivsUA

full member

Activity: 210

Merit: 100

Quote from: coin1974 on September 10, 2014, 09:12:17 AM

Quote from: LivsUA on September 10, 2014, 08:31:40 AM

Quote from: coin1974 on September 10, 2014, 08:24:51 AM

Quote from: LivsUA on September 10, 2014, 08:14:30 AM

Hi EVERYONE!!!

i read most of this pages and have few questions..

I have 3 PC's with generated plots, on ich one is 600GB plot. I know that exist some SYMLINK or something.. But, how can i mine with this on pool like if i were mining with one PC or with one big capacity Cheesy

?
Mining on pool V1 now, dont get anything for quite long time Sad

Or how i can effectively use my 3 PC's where on every PC is 600 GB plot ?

THANKS a lot for responses!!!

You need to generate plot on pool address if you are on v1 pool i think. Are you mining on solo plots you generated? If so then you are mining on wrong pool may be that is why you didnt get anything for long time. Change pool and see Wink

About 3 pc's separate plot you join the pool from each pc and mine, i dunno if they can be merged and mine like one space.. Or wait for experts to comment, i can be wrong also i dont read all posts here so

Yes, i have plots genereted for pool V1.

My command line: "C:\Program Files\Java\jre7\bin\java.exe" -Xmx2500m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate NUMBER_ADRESS 5242902 409600 6000 4

And my generated plots looks like this:

NUMBER_ADRESS_2867204_409600_2000

So, to mine on pool V2 i need to "register" on V2 with different wallet on ich PC or.?

And do wallet need to be open/runnig all the time? Or how pool recognize that i send him "share"?

Maybe some kind soul explains how to do it? Cheesy

THANKS!!!!!

V2 pool works on your solo plot, you just need some settings from pool and edit your miner folder and you ll need poc pool miner. Pool instructions here http://178.62.39.204:8121/ ... Pool miner link must be on OP, please check there. Wink

Yes you need to register with different wallet and mine on pool from each pc for now Grin

THANKS! I had figured out it few minutes ago Cheesy

Before this post Cheesy

cad_cdn

hero member

Activity: 560

Merit: 500

a lot of complaining...
a lot of demanding...
a lot of asking the same questions over and over...
a lot of whining...
a lot of asking the same questions over and over...

1. Thanks to dev, and ALL those others making web sites, web pages, tools, custom apps, drivers, answering the same questions over and over etc.
2. People, read the tutorials, search the threads for answers to your questions before you post
3. If You have not contributed anything to the coin or the community, you have no right to demand, complain, or whine.

In it's simplest sense, as someone outside looking in might see -

it looks and sounds like 'we all got something for free' and then are 'demanding and complaining about it'

once again, thx dev and all the contributors.

coin1974

newbie

Activity: 46

Merit: 0

Quote from: LivsUA on September 10, 2014, 08:31:40 AM

Quote from: coin1974 on September 10, 2014, 08:24:51 AM

Quote from: LivsUA on September 10, 2014, 08:14:30 AM

Hi EVERYONE!!!

i read most of this pages and have few questions..

I have 3 PC's with generated plots, on ich one is 600GB plot. I know that exist some SYMLINK or something.. But, how can i mine with this on pool like if i were mining with one PC or with one big capacity Cheesy

?
Mining on pool V1 now, dont get anything for quite long time Sad

Or how i can effectively use my 3 PC's where on every PC is 600 GB plot ?

THANKS a lot for responses!!!

You need to generate plot on pool address if you are on v1 pool i think. Are you mining on solo plots you generated? If so then you are mining on wrong pool may be that is why you didnt get anything for long time. Change pool and see Wink

About 3 pc's separate plot you join the pool from each pc and mine, i dunno if they can be merged and mine like one space.. Or wait for experts to comment, i can be wrong also i dont read all posts here so

Yes, i have plots genereted for pool V1.

My command line: "C:\Program Files\Java\jre7\bin\java.exe" -Xmx2500m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate NUMBER_ADRESS 5242902 409600 6000 4

And my generated plots looks like this:

NUMBER_ADRESS_2867204_409600_2000

So, to mine on pool V2 i need to "register" on V2 with different wallet on ich PC or.?

And do wallet need to be open/runnig all the time? Or how pool recognize that i send him "share"?

Maybe some kind soul explains how to do it? Cheesy

THANKS!!!!!

V2 pool works on your solo plot, you just need some settings from pool and edit your miner folder and you ll need poc pool miner. Pool instructions here http://178.62.39.204:8121/ ... Pool miner link must be on OP, please check there. Wink

Yes you need to register with different wallet and mine on pool from each pc for now Grin

alexzerg11

newbie

Activity: 31

Merit: 0

gpu_generator must add the intensity parameter

coinits

legendary

Activity: 1582

Merit: 1019

011110000110110101110010

Quote from: taaku on September 10, 2014, 09:05:56 AM

how do i know that the file generated successfully....my plot runner was running ...i am not sure when it closed..the size is good....but how do i make sure the file generated fine? Huh

Is the size of file spaced used up equal to what you specified in your generate bat? With me it was easy. My drives were full

LivsUA

full member

Activity: 210

Merit: 100

Quote from: taaku on September 10, 2014, 09:05:56 AM

how do i know that the file generated successfully....my plot runner was running ...i am not sure when it closed..the size is good....but how do i make sure the file generated fine? Huh

You easy recognize it when you start to mine and you will see in that window something like this:

ERROR file reading <----- that means you have generated file that is not full but you can mine with it like with full generated
no valid shares to submit to pool

taaku

full member

Activity: 145

Merit: 100

how do i know that the file generated successfully....my plot runner was running ...i am not sure when it closed..the size is good....but how do i make sure the file generated fine? Huh

soulmann

full member

Activity: 221

Merit: 100

The difficult history doesnt seem to work properly
http://burst.cryptoport.io/stat

Is there other site to monitor the difficult history?

Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 887. (Read 2171056 times)