can't wait to see pluto as this coin has already visited the moon once!
Topic: [ANN][BWK] BULWARK | NO ICO | Masternodes | Accelerated PoW | Seesaw PoS/MN - page 18. (Read 125752 times)
July 04, 2018, 12:43:12 PM
this coin/project and team are awesome! so on top of things!
can't wait to see pluto as this coin has already visited the moon once!
can't wait to see pluto as this coin has already visited the moon once!
July 04, 2018, 12:17:04 PM
Deposits and withdrawals have been reenabled on CryptoBridge.
https://wallet.crypto-bridge.org/market/BRIDGE.BWK_BRIDGE.BTC
Thank you all for your support!
https://wallet.crypto-bridge.org/market/BRIDGE.BWK_BRIDGE.BTC
Thank you all for your support!
July 04, 2018, 12:13:23 PM
Bulwark BWK listed on Gincoin Platform.
Gincoin One - Click Masternode LIVE | Shared Masternode Platform.
Congratulation !
Gincoin One - Click Masternode LIVE | Shared Masternode Platform.
Congratulation !
GIN platform continues its coin listing with two more projects: BulwarkCoin and Dystemio! You can now launch BWK and DTEM masternodes in the easiest way possible: on the GIN platform: https://p.gincoin.io/ !
July 03, 2018, 01:27:05 PM
!Final Warning!
In approximately six hours we will be turning on the spork that bans all peers that are lower than version 1.3.1
Please be sure to update your wallets and masternodes to 1.3.1 as soon as possible.
https://github.com/bulwark-crypto/Bulwark/releases …
Thank you for your patience! $BWK
In approximately six hours we will be turning on the spork that bans all peers that are lower than version 1.3.1
Please be sure to update your wallets and masternodes to 1.3.1 as soon as possible.
https://github.com/bulwark-crypto/Bulwark/releases …
Thank you for your patience! $BWK
July 02, 2018, 02:59:31 PM
Wow, my masternode got paid twice today. Two consecutive blocks!
I didn't even know that was possible
I didn't even know that was possible
course it is, it just doesnt happen often enough
July 02, 2018, 02:46:04 PM
Wow, my masternode got paid twice today. Two consecutive blocks!
I didn't even know that was possible
I didn't even know that was possible
June 30, 2018, 10:04:58 PM
I downloaded the last wallet, but it is not synchronized after the block 182700 . deleted blockchain, downloaded again - does not go further
You should add active nodes into your conf file and try re-installing, then re-syncing wallet again.Please remember backing up your wallet, and saving your backup file at different safely places for later usage, especially in the worst case.
There is no need to add nodes.
This would be a simple fix:
Wallet Syncing Issues
Make sure you have the newest Wallet version.Now close your wallet and head over to the Bulwark folder and delete everything except wallet.dat, masternode.conf and the backups folder.
How to find your Bulwark folder:
Windows: Press Windows+R and write %appdata%
macOS: Paste ~/Library/Application Support/Bulwark into Spotlight and press Enter.
Linux: Open ~/.bulwark/
June 30, 2018, 08:50:04 PM
How many coin for daily reward POS?
is there any good site to do POS pool with BWK?
is there any good site to do POS pool with BWK?
It depends on quite a few variables so it'd be difficult to determine exactly what "daily reward" would equal.
As far as PoS pools are concerned, I don't believe I've seen any pop up yet.
June 30, 2018, 07:35:51 PM
How many coin for daily reward POS?
is there any good site to do POS pool with BWK?
is there any good site to do POS pool with BWK?
June 30, 2018, 10:27:29 AM
Any POS calculators?
June 30, 2018, 06:18:52 AM
I downloaded the last wallet, but it is not synchronized after the block 182700 . deleted blockchain, downloaded again - does not go further
June 30, 2018, 02:49:03 AM
I got no stacking rewards in the last 2 days, when normally i would get 1, or2/day, anyone else got this problem also? can it be related to the wallet update?
I saw that starting from block 200k, the shares will be 65-35 in favor of masternodes, what are the percentages now?
thanks
I saw that starting from block 200k, the shares will be 65-35 in favor of masternodes, what are the percentages now?
thanks
Percentages now are based on seesaw so it varies. The wallet update wouldn't have affected that at all unless you've set your stake split threshold too low to receive rewards in the time frame you're expecting or if you're not unlocking your wallet for staking.
Here is our Discord link: https://discord.gg/a7vhegP
If you continue to have issues, feel free to join the server and somebody can assist you in figuring out whether or not there is a problem.
June 30, 2018, 02:20:29 AM
I got no stacking rewards in the last 2 days, when normally i would get 1, or2/day, anyone else got this problem also? can it be related to the wallet update?
I saw that starting from block 200k, the shares will be 65-35 in favor of masternodes, what are the percentages now?
thanks
I saw that starting from block 200k, the shares will be 65-35 in favor of masternodes, what are the percentages now?
thanks
June 29, 2018, 02:14:52 PM
haha good, looks like be keeping my MN running for good coin w00t!
BWK moon will bring mad hookers and blow for alllllllll! errr, i mean good results...yes...results, that's it...
BWK moon will bring mad hookers and blow for alllllllll! errr, i mean good results...yes...results, that's it...
June 29, 2018, 11:29:12 AM
I think I may have got it all now, just checking on this last staking status for a bit
you mentioned a way to see what was going on like minted coins and staking reward, etc..how do you do that?
you mentioned a way to see what was going on like minted coins and staking reward, etc..how do you do that?
June 28, 2018, 11:38:40 PM
Important Announcement!
This is a mandatory update to Bulwark v1.3.1 that will be removing the SeeSaw system while adding some UI fixes, improvements, and security upgrades.
While the system does work, "Good Enough" does not meet our standards as there are certain stability issues that are preventing the network from running as stable as we'd like it to.
We will instead be adopting a fixed reward system in which Masternodes receive 65% of the Block Reward and PoS receives 35%. This changeover will take place on block 200,000.
Please be sure to update your wallets and masternodes accordingly. We will allow 5-6 days for the majority of the network to update before activating the spork that will enforce this new version.
The new update is available at https://github.com/bulwark-crypto/Bulwark/releases
Updating Local Wallet:
Close wallet, download new binaries from our github, open wallet with new binaries.
Updating VPS MN:
bash <( curl https://raw.githubusercontent.com/bulwark-crypto/Bulwark-MN-Install/master/update_node.sh )
Updating SHN:
bash <( curl https://raw.githubusercontent.com/bulwark-crypto/shn/master/update.sh )
Update VPS Staking Wallet:
bash <( curl https://gist.githubusercontent.com/kewagi/c09e5b4b7bf01f88e5231f2b4ea1b191/raw/042e69c38a722600d440ecc617aa9df6929b5d84/staking-update.sh )
The community as well as ourselves were rather excited for SeeSaw, we do profusely apologize for the quick succession of mandatory updates required for us to remove it and appreciate everyone's patience and confidence with us.
Thank you all for your support!
This is a mandatory update to Bulwark v1.3.1 that will be removing the SeeSaw system while adding some UI fixes, improvements, and security upgrades.
While the system does work, "Good Enough" does not meet our standards as there are certain stability issues that are preventing the network from running as stable as we'd like it to.
We will instead be adopting a fixed reward system in which Masternodes receive 65% of the Block Reward and PoS receives 35%. This changeover will take place on block 200,000.
Please be sure to update your wallets and masternodes accordingly. We will allow 5-6 days for the majority of the network to update before activating the spork that will enforce this new version.
The new update is available at https://github.com/bulwark-crypto/Bulwark/releases
Updating Local Wallet:
Close wallet, download new binaries from our github, open wallet with new binaries.
Updating VPS MN:
bash <( curl https://raw.githubusercontent.com/bulwark-crypto/Bulwark-MN-Install/master/update_node.sh )
Updating SHN:
bash <( curl https://raw.githubusercontent.com/bulwark-crypto/shn/master/update.sh )
Update VPS Staking Wallet:
bash <( curl https://gist.githubusercontent.com/kewagi/c09e5b4b7bf01f88e5231f2b4ea1b191/raw/042e69c38a722600d440ecc617aa9df6929b5d84/staking-update.sh )
The community as well as ourselves were rather excited for SeeSaw, we do profusely apologize for the quick succession of mandatory updates required for us to remove it and appreciate everyone's patience and confidence with us.
Thank you all for your support!
June 28, 2018, 01:17:52 PM
Just want to disclose I had to put in a support ticket for deposit stuck at 19/20 on cryptopia but it was pushed through a couple hours after i submitted the support ticket, good for cryptopia being fast with their tickets now.
Think we are at a solid floor around 9500-11k sats, hopefully will stay sideways (or up of course) from here.
Think we are at a solid floor around 9500-11k sats, hopefully will stay sideways (or up of course) from here.
June 28, 2018, 01:07:30 PM
Hi. Why my masternode is mising all time(i start it couple times)? Can somebody paste all lines of bulwark.conf?
Did you update to v1.3? If not, then that's why and you'll have to update.
The instructions for updating your masternode can be found at https://github.com/bulwark-crypto/Bulwark-MN-Install
Specifically this portion:
Updating Node
To update your node please run this command and follow the instructions. Please note that this script must be run as root.
bash <( curl https://raw.githubusercontent.com/bulwark-crypto/Bulwark-MN-Install/master/update_node.sh )
"Quote from: robo2 on June 17, 2018, 07:17:09 AM
Hi. Why my masternode is mising all time(i start it couple times)? Can somebody paste all lines of bulwark.conf?
For the vps wallet
rpcuser=
rpcpassword=
port=52543
rpcallowip=127.0.0.1
externalip=
server=1
daemon=1
listen=1
promode=1
masternode=1
masternodeprivkey=
Fill in the missing values like IP and masternodeprivkey. You also need rpcuser and passwords to not be empty
The local, controller wallet only needs rpcuser and rpcpassword
If you are having trouble starting the masternode try
startmasternode "all" 0
from the controller wallet, after you unlock it with passphrase
If it can't start, make sure the masternode input is not locked by the wallet, that happens sometimes.
Enable coin control, go to inputs (in send) and unlock the 5000 bwk. Then start the masternode again"
Hi again
After:
Enable coin control, go to inputs (in send) and unlock the 5000 bwk + startmasternode "all" 0
masternode start first time and i earn 4 transactions but finally wallet freeze.
Now i cant start this masternode again "missing":
masternode status -> "Masternode not found in the list of avalible masternodes. Current status: Not capable masternode: Could not connect to ...:52543 (code -1)
I use windows vps and other two coin masternodes works perfect on this vps
May i suggest using a Linux VPS and using our script? Our ability to troubleshoot issues on platforms we don't have official documentation for is kind of limited.
That said, unlocking the input shouldn't have any effect on the issues you're having. Also, just because it isn't 100% clear, did you update the node to the latest wallet?
June 27, 2018, 09:35:03 PM
Thanks.
June 27, 2018, 07:05:27 PM
Hi. Why my masternode is mising all time(i start it couple times)? Can somebody paste all lines of bulwark.conf?
Did you update to v1.3? If not, then that's why and you'll have to update.
The instructions for updating your masternode can be found at https://github.com/bulwark-crypto/Bulwark-MN-Install
Specifically this portion:
Updating Node
To update your node please run this command and follow the instructions. Please note that this script must be run as root.
bash <( curl https://raw.githubusercontent.com/bulwark-crypto/Bulwark-MN-Install/master/update_node.sh )
"Quote from: robo2 on June 17, 2018, 07:17:09 AM
Hi. Why my masternode is mising all time(i start it couple times)? Can somebody paste all lines of bulwark.conf?
For the vps wallet
rpcuser=
rpcpassword=
port=52543
rpcallowip=127.0.0.1
externalip=
server=1
daemon=1
listen=1
promode=1
masternode=1
masternodeprivkey=
Fill in the missing values like IP and masternodeprivkey. You also need rpcuser and passwords to not be empty
The local, controller wallet only needs rpcuser and rpcpassword
If you are having trouble starting the masternode try
startmasternode "all" 0
from the controller wallet, after you unlock it with passphrase
If it can't start, make sure the masternode input is not locked by the wallet, that happens sometimes.
Enable coin control, go to inputs (in send) and unlock the 5000 bwk. Then start the masternode again"
Hi again
After:
Enable coin control, go to inputs (in send) and unlock the 5000 bwk + startmasternode "all" 0
masternode start first time and i earn 4 transactions but finally wallet freeze.
Now i cant start this masternode again "missing":
masternode status -> "Masternode not found in the list of avalible masternodes. Current status: Not capable masternode: Could not connect to ...:52543 (code -1)
I use windows vps and other two coin masternodes works perfect on this vps
Jump to: