why does the exchange make us wait 2000 blocks 
for confirmation??
It's not like it takes very long for 2000 blocks to be mined... Mine usually confirm in under 2 minutes. for confirmation??
Topic: [ANN][CRT][CRT100M] Cryptotarget - Dual Wallet Updated! v1.0.2 - page 34. (Read 47858 times)
ok makes sence
why does the exchange make us wait 2000 blocks for confirmation??
for confirmation?? 
This coin won't trade at 1 latoshi either, we are looking at single digit Doge value - maybe.
4 billion 10 second blocks. 100 quadrillion total coins. Why would you assume 1 satoshi? makes me think you have no idea how many coins this is.
4 billion 10 second blocks. 100 quadrillion total coins. Why would you assume 1 satoshi? makes me think you have no idea how many coins this is.
Let's get it on exchanges and see how well it works for BTC, LTC, DOGE or other. Consider it an experiment in this case. I'm only saying that the lowest value you can value an alt is at 1 satoshi in BTC. You can't trade at 0 satoshi (can't multiply/divide by 0 so exchanges can't go lower than 1 satoshi). Same goes for 1 latoshi or 1 dogetoshi.
Of course I know how many coins there are, I made the coin
I made the changes in the BTC source code to support such a large coin supply that BTC doesn't natively support.I want to make this coin independent of BTC/LTC/DOGE value as it grows in the future, being restrained by value of other coins is annoying and I do see CRT as a chance to break away from this current trend.
well this what i noticed last night hope he will fix the payout issue
We need it on an exchange!!
how could i solo mine this with my antminers?
Antminers cannot solo mine by themselves, at least not yet. To solo mine with standalone miners like the Antminer, you must set up a stratum server, the same type of things that pools use. There's a lot of configuration that goes on and it's a lot of work, but in some cases it's worth it. I set up a Zetacoin stratum just so I could solo mine, but I also wanted the fun of running a pool so I added the most popular free pool software called MPOS. So now I run a solo mine, but it's open to anyone who PMs me. Setting up either of those things takes a lot of time and a lot of knowledge, as well as some patience. I recommend following Whatthefluxable's tutorials here: https://www.youtube.com/playlist?list=PL3VHTMe_nFkyFN5VMakrjcFtmk2TKO42iIn most cases, it's just not worth the effort unless you want to do it for some fun too.
selling these coins @ .1 SAT each, discount for larger bundles
I will sell 100,000,000,000 coins for 0.10 BTC. Send me message if want.
I mined 3.8 times that in 6 hours with 450gh/s.yes people mining coins often try and kill price they get is nothing new. i mined with 1300gh/s for 12 hrs and got 311,000,000 coins. i sold some already at my price. i have a few more to sell. if you really want to sell yours for 1/8 my price send me pm i will buy them.
I will sell 100,000,000,000 coins for 0.10 BTC. Send me message if want.
still have 60,000,000 coins left to sell send me message if want for 0.05
how could i solo mine this with my antminers?
I will sell 100,000,000,000 coins for 0.10 BTC. Send me message if want.
I mined 3.8 times that in 6 hours with 450gh/s.hmm i had 1 Th/s for 12 hrs .. and only mined 423 Billion your math seems a little off
Q
I will sell 100,000,000,000 coins for 0.10 BTC. Send me message if want.
I mined 3.8 times that in 6 hours with 450gh/s.hmm i had 1 Th/s for 12 hrs .. and only mined 423 Billion your math seems a little off
Q
I just received my coins from the pool. It was from an auto payout. The coins are still pending in my wallet but I'm assuming that they'll confirm with time.
Update 1: DO NOT TURN ON AUTO PAYOUT ON THE POOL! My wallet almost crashed because it had to create about 100 pop ups for the coins I received! If you have auto payout on, turn it off or keep your wallet open constantly!
Update 2: The majority of my coins just became confirmed. Everything appears to be working normally for me.
Update 3: I can definitely confirm that the Minerpools Cryptotarget Coin pool is functioning normally. I've received multiple payouts and they have all been confirmed.
Update 1: DO NOT TURN ON AUTO PAYOUT ON THE POOL! My wallet almost crashed because it had to create about 100 pop ups for the coins I received! If you have auto payout on, turn it off or keep your wallet open constantly!
Update 2: The majority of my coins just became confirmed. Everything appears to be working normally for me.
Update 3: I can definitely confirm that the Minerpools Cryptotarget Coin pool is functioning normally. I've received multiple payouts and they have all been confirmed.
I can confirm if you set the pool to auto payout it works , just received all my coins in 1 transaction
wows Just missing the 100 billion from the manual payout, missing a quarter of my investment sucks hopefully pool will resolve
Q
I will sell 100,000,000,000 coins for 0.10 BTC. Send me message if want.
I mined 3.8 times that in 6 hours with 450gh/s.
I just received my coins from the pool. It was from an auto payout. The coins are still pending in my wallet but I'm assuming that they'll confirm with time.
Update 1: DO NOT TURN ON AUTO PAYOUT ON THE POOL! My wallet almost crashed because it had to create about 100 pop ups for the coins I received! If you have auto payout on, turn it off or keep your wallet open constantly!
Update 2: The majority of my coins just became confirmed. Everything appears to be working normally for me.
Update 3: I can definitely confirm that the Minerpools Cryptotarget Coin pool is functioning normally. I've received multiple payouts and they have all been confirmed.
Update 1: DO NOT TURN ON AUTO PAYOUT ON THE POOL! My wallet almost crashed because it had to create about 100 pop ups for the coins I received! If you have auto payout on, turn it off or keep your wallet open constantly!
Update 2: The majority of my coins just became confirmed. Everything appears to be working normally for me.
Update 3: I can definitely confirm that the Minerpools Cryptotarget Coin pool is functioning normally. I've received multiple payouts and they have all been confirmed.
I will sell 100,000,000,000 coins for 0.10 BTC. Send me message if want.
Pool has removed warning of everything suspended my 100 Billion still not arrived that was withdrawn , dare not withdraw total ...
Wallet is sync'd no coins
Hope i didn't lose 100 Billion
Q
Wallet is sync'd no coins
Hope i didn't lose 100 Billion
Q
I would stop using the pool for now until the issue has been resolved.
If the issue persists then I will intervene and make sure that each person is compensated. However, I doubt it will come to that. The pool owner is busy implementing a fix. Your coins are still with the pool wallet, the database has been updated to account for a withdrawal that hasn't actually happened which is why it the withdrawal appears to be successful on the front end.
The fix I proposed to the pool owner is to send the whole number amount and to ignore everything after the decimal place as this isn't worth anything. I'm waiting on a response from them.
Pool has yet to address the payment, pool's host is waiting for dev support.If the issue persists then I will intervene and make sure that each person is compensated. However, I doubt it will come to that. The pool owner is busy implementing a fix. Your coins are still with the pool wallet, the database has been updated to account for a withdrawal that hasn't actually happened which is why it the withdrawal appears to be successful on the front end.
The fix I proposed to the pool owner is to send the whole number amount and to ignore everything after the decimal place as this isn't worth anything. I'm waiting on a response from them.
pool workers panic evacuated.
I've PM'd minerpools the solution after looking through MPOS source and speaking to xisi. It's up to him to test it and ensure the payouts happen.
The solution in question is:
Code:
Open cronjob\payouts.php, go to line 94 and 177.
Replace
$rpc_txid = $bitcoin->sendtoaddress($aUserData['coin_address'], $aUserData['confirmed'] - $config['txfee_auto']);
With
$rpc_txid = $bitcoin->sendtoaddress($aUserData['coin_address'], round($aUserData['confirmed']) - ceil($config['txfee_auto']));
Or set the tx fee manually and remove the ceil function.
This will round the payout amount and round up the tx fee to whole numbers. It should work fine however suggestions are welcome.
All that is above my pay grade. Set the transaction fee manually if that is easier. I doubt anyone is worried about a few hundred coins here or there. I mined 500 billion coins in a few hours yesterday on there!
I would solomine but I'm having network issues and I cannot seem to get solomining going for some reason. It's not the coin, home network issues. I'll mine more at the pool and just trust the payout issues get fixed eventually.
For the record, I think this is a bit of a silly concept, but meh, its worth it to mine at the moment if it ends up trading in the single digit dogetoshi range.
This coin won't trade at 1 latoshi either, we are looking at single digit Doge value - maybe.
4 billion 10 second blocks. 100 quadrillion total coins. Why would you assume 1 satoshi? makes me think you have no idea how many coins this is.
4 billion 10 second blocks. 100 quadrillion total coins. Why would you assume 1 satoshi? makes me think you have no idea how many coins this is.
I would stop using the pool for now until the issue has been resolved.
If the issue persists then I will intervene and make sure that each person is compensated. However, I doubt it will come to that. The pool owner is busy implementing a fix. Your coins are still with the pool wallet, the database has been updated to account for a withdrawal that hasn't actually happened which is why it the withdrawal appears to be successful on the front end.
The fix I proposed to the pool owner is to send the whole number amount and to ignore everything after the decimal place as this isn't worth anything. I'm waiting on a response from them.
Pool has yet to address the payment, pool's host is waiting for dev support.If the issue persists then I will intervene and make sure that each person is compensated. However, I doubt it will come to that. The pool owner is busy implementing a fix. Your coins are still with the pool wallet, the database has been updated to account for a withdrawal that hasn't actually happened which is why it the withdrawal appears to be successful on the front end.
The fix I proposed to the pool owner is to send the whole number amount and to ignore everything after the decimal place as this isn't worth anything. I'm waiting on a response from them.
pool workers panic evacuated.
Jump to: