[ANN][CRW] CROWN (SHA256) | Platform | Governance | Systemnodes | Masternodes | - page 208.

1_Pablo_Angel

newbie

Activity: 16

Merit: 0

Quote from: defunctec on September 20, 2016, 03:44:56 PM

Quote from: 1_Pablo_Angel on September 20, 2016, 03:41:22 PM

Quote from: stonehedge on September 20, 2016, 02:38:29 PM

I have experienced this in the past too. I'm not sure exactly what is causing it.

I'll look into the root cause and report back.

When it happened for me before, I tried again a few hours later and it worked fine. Needs to be fixed though.

I've reinstalled the second VPS OS and gone through the guide again - just waiting for the blockchain to download and I'll give it another go.

How i fixed this.

Shut down the QT

Goto throne.conf

Copy paste the working throne info to a temp txt file.

Start the wallet again

Do throne start, or if more than one needs fixing throne start-many

This should activate the throne.

Turn the wallet off

Goto throne.conf

Add the throne you copy pasted from before

Restart wallet

----====----

Like stone said, this needs fixing and is on the list, cheers

Nice one, that worked a treat

FYI, I tried doing a normal throne start-many after sorting out the 2nd VPS - it worked, but I got a VIN error on the first one! 2nd one appeared on list, first did not. Followed the advice above and now both are on the active list.

Happy to help Stonehedge, cheers for the quick responses guys.

M8BWNNRFMNdak68c

sr. member

Activity: 373

Merit: 250

soo, updated.. are we on the correct chain now..? i still see only 6 masternodes..

Quote

"version" : 90350,
"protocolversion" : 70020,
"walletversion" : 60000,

Quote

{
"192.99.73.200:9340" : "ENABLED",
"146.0.32.101:9340" : "ENABLED",
"159.203.31.42:9340" : "ENABLED",
"163.172.64.208:9340" : "ENABLED",
"45.32.156.157:9340" : "ENABLED",
"163.172.177.131:9340" : "ENABLED"
}

defunctec

legendary

Activity: 1092

Merit: 1000

Quote from: 1_Pablo_Angel on September 20, 2016, 03:41:22 PM

Quote from: stonehedge on September 20, 2016, 02:38:29 PM

I have experienced this in the past too. I'm not sure exactly what is causing it.

I'll look into the root cause and report back.

When it happened for me before, I tried again a few hours later and it worked fine. Needs to be fixed though.

I've reinstalled the second VPS OS and gone through the guide again - just waiting for the blockchain to download and I'll give it another go.

How i fixed this.

Shut down the QT

Goto throne.conf

Copy paste the working throne info to a temp txt file.

Start the wallet again

Do throne start, or if more than one needs fixing throne start-many

This should activate the throne.

Turn the wallet off

Goto throne.conf

Add the throne you copy pasted from before

Restart wallet

----====----

Like stone said, this needs fixing and is on the list, cheers

1_Pablo_Angel

newbie

Activity: 16

Merit: 0

Quote from: stonehedge on September 20, 2016, 02:38:29 PM

I have experienced this in the past too. I'm not sure exactly what is causing it.

I'll look into the root cause and report back.

When it happened for me before, I tried again a few hours later and it worked fine. Needs to be fixed though.

I've reinstalled the second VPS OS and gone through the guide again - just waiting for the blockchain to download and I'll give it another go.

IconFirm

hero member

Activity: 1438

Merit: 574

Always ask questions. #StandWithHongKong

After compiling from git the wallet is showing as:

Code:

"version" : 90350

& the latest win 64 wallet is showing as:

Code:

v0.9.2.0-gc405d6c

but the repo staes they should be v0.9.5...... Huh

stonehedge

legendary

Activity: 1722

Merit: 1002

Decentralize Everything

I hope you guys understand this.

It feels really nice for people to be reporting problems like this. We've been doing these things in a small group for a while. Its great to be getting some help from new community members!

stonehedge

legendary

Activity: 1722

Merit: 1002

Decentralize Everything

Quote from: 1_Pablo_Angel on September 20, 2016, 02:23:01 PM

Quote from: defunctec on September 16, 2016, 04:28:21 PM

Quote from: 1_Pablo_Angel on September 16, 2016, 01:59:54 PM

Quote from: defunctec on September 16, 2016, 01:35:00 PM

Quote from: 1_Pablo_Angel on September 16, 2016, 01:18:24 PM

Quote from: crowncoin_knight on September 16, 2016, 12:25:21 PM

Go ahead mate, the more Thrones we have more stable the Crowncoin network becomes and our primary goal with the project approaches faster! Have a Good weekend!

Quote from: 1_Pablo_Angel on September 16, 2016, 02:09:40 AM

Quote from: defunctec on September 15, 2016, 12:51:31 PM

Quote from: 1_Pablo_Angel on September 15, 2016, 12:00:48 PM

Seems to be working now, thanks for that.

Great to hear, welcome to the club Cool

Did the Throne setup guide help you much?

Thanks, and yep, wouldn't have had a clue how to set it up without the guide!

Should have a couple more up over the weekend.

I've set up a second VPS, blockchain all downloaded, but I'm not sure what to put in my local crowncoin.conf file now. At the moment, it's got the following lines in it:

externalip=x.x.x.x
throne=1
throneprivkey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

which refer to the first throne I set up, as per the guide (I think. It's been working off the first one since I set it up anyway).

Does anyone know how I reference the second throne in there as well?

Thanks again!

Are you trying to run more than one throne from local wallet?

Yeah, is that possible?

Start-many Instructions

This only tells you how to setup LOCAL side... I recommend using a hosting service to help you setup REMOTE side.

Thanks for this. I've followed the instructions, and when I go to throne start-many I get the following error message:

{
"overall" : "Successfully started 0 thrones, failed to start 2, total 2",
"detail" : {
"status" : {
"alias" : "Throne1",
"result" : "failed",
"errorMessage" : "Throne has already been started and your IP added to the list."
},
"status" : {
"alias" : "Throne2",
"result" : "failed",
"errorMessage" : "Throne has already been started and your IP added to the list."
}
}
}

the first throne is in the list of those running when I do throne list, but the second isn't there. Both appear to be running fine on the VPS and are up to date. Any ideas what I might have done wrong?

I have experienced this in the past too. I'm not sure exactly what is causing it.

I'll look into the root cause and report back.

When it happened for me before, I tried again a few hours later and it worked fine. Needs to be fixed though.

1_Pablo_Angel

newbie

Activity: 16

Merit: 0

Quote from: defunctec on September 16, 2016, 04:28:21 PM

Quote from: 1_Pablo_Angel on September 16, 2016, 01:59:54 PM

Quote from: defunctec on September 16, 2016, 01:35:00 PM

Quote from: 1_Pablo_Angel on September 16, 2016, 01:18:24 PM

Quote from: crowncoin_knight on September 16, 2016, 12:25:21 PM

Go ahead mate, the more Thrones we have more stable the Crowncoin network becomes and our primary goal with the project approaches faster! Have a Good weekend!

Quote from: 1_Pablo_Angel on September 16, 2016, 02:09:40 AM

Quote from: defunctec on September 15, 2016, 12:51:31 PM

Quote from: 1_Pablo_Angel on September 15, 2016, 12:00:48 PM

Seems to be working now, thanks for that.

Great to hear, welcome to the club Cool

Did the Throne setup guide help you much?

Thanks, and yep, wouldn't have had a clue how to set it up without the guide!

Should have a couple more up over the weekend.

I've set up a second VPS, blockchain all downloaded, but I'm not sure what to put in my local crowncoin.conf file now. At the moment, it's got the following lines in it:

externalip=x.x.x.x
throne=1
throneprivkey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

which refer to the first throne I set up, as per the guide (I think. It's been working off the first one since I set it up anyway).

Does anyone know how I reference the second throne in there as well?

Thanks again!

Are you trying to run more than one throne from local wallet?

Yeah, is that possible?

Start-many Instructions

This only tells you how to setup LOCAL side... I recommend using a hosting service to help you setup REMOTE side.

Thanks for this. I've followed the instructions, and when I go to throne start-many I get the following error message:

{
"overall" : "Successfully started 0 thrones, failed to start 2, total 2",
"detail" : {
"status" : {
"alias" : "Throne1",
"result" : "failed",
"errorMessage" : "Throne has already been started and your IP added to the list."
},
"status" : {
"alias" : "Throne2",
"result" : "failed",
"errorMessage" : "Throne has already been started and your IP added to the list."
}
}
}

the first throne is in the list of those running when I do throne list, but the second isn't there. Both appear to be running fine on the VPS and are up to date. Any ideas what I might have done wrong?

jeliman

full member

Activity: 227

Merit: 125

Wallets have been also updated on btc talk OP

Quote from: CHAOSiTEC on September 20, 2016, 12:56:57 PM

i found the culprit for the few thrones shown, its been fixed, in github, and wallets on crowncoin.org

CHAOSiTEC

legendary

Activity: 1358

Merit: 1002

i found the culprit for the few thrones shown, its been fixed, in github, and wallets on crowncoin.org

defunctec

legendary

Activity: 1092

Merit: 1000

ACP

hero member

Activity: 612

Merit: 520

stonehedge

legendary

Activity: 1722

Merit: 1002

Decentralize Everything

Quote from: ACP on September 20, 2016, 08:46:57 AM

Quote from: stonehedge on September 20, 2016, 08:19:35 AM

Quote from: CHAOSiTEC on September 20, 2016, 07:59:56 AM

Quote from: M8BWNNRFMNdak68c on September 20, 2016, 07:53:51 AM

jep.. from github..

Quote

"version" : 90200,
"protocolversion" : 70020,
"walletversion" : 60000

Quote

{
   "139.59.255.88:9340" : "ENABLED",
   "146.0.32.101:9340" : "ENABLED",
   "192.99.73.200:9340" : "ENABLED"
}

both of you, please update your thrones wallet from github
and your windows wallet via OP of this thread

this should fix all your problems.

This hardfork has been a bumpy ride, and i apologies to everyone, we are setting up procedures on how things will be from here on out
this latest wallet will support the hardforking happening sunday 25th at 10 AM UTC

The hard fork that we haven't announced yet Grin

We're implementing Dark Gravity Wave so we can enjoy more rapid diff adjustments.

We've been squeezed by a few >1Ph pools in the last few weeks and it is creating a bit too much of a sell pressure to be healthy.

yeah I see 13hrs ago you guys updated the GitHub, everyone needs to be on the same page .

I agree. Basic screw up on our part. I'm going to be taking responsibility for release management from now on so hopefully this will be the last time.

ACP

hero member

Activity: 612

Merit: 520

Quote from: stonehedge on September 20, 2016, 08:19:35 AM

Quote from: CHAOSiTEC on September 20, 2016, 07:59:56 AM

Quote from: M8BWNNRFMNdak68c on September 20, 2016, 07:53:51 AM

jep.. from github..

Quote

"version" : 90200,
"protocolversion" : 70020,
"walletversion" : 60000

Quote

{
   "139.59.255.88:9340" : "ENABLED",
   "146.0.32.101:9340" : "ENABLED",
   "192.99.73.200:9340" : "ENABLED"
}

both of you, please update your thrones wallet from github
and your windows wallet via OP of this thread

this should fix all your problems.

This hardfork has been a bumpy ride, and i apologies to everyone, we are setting up procedures on how things will be from here on out
this latest wallet will support the hardforking happening sunday 25th at 10 AM UTC

The hard fork that we haven't announced yet Grin

We're implementing Dark Gravity Wave so we can enjoy more rapid diff adjustments.

We've been squeezed by a few >1Ph pools in the last few weeks and it is creating a bit too much of a sell pressure to be healthy.

yeah I see 13hrs ago you guys updated the GitHub, everyone needs to be on the same page .

stonehedge

legendary

Activity: 1722

Merit: 1002

Decentralize Everything

Quote from: ACP on September 20, 2016, 08:28:15 AM

Quote from: stonehedge on September 20, 2016, 08:19:35 AM

Quote from: CHAOSiTEC on September 20, 2016, 07:59:56 AM

Quote from: M8BWNNRFMNdak68c on September 20, 2016, 07:53:51 AM

jep.. from github..

Quote

"version" : 90200,
"protocolversion" : 70020,
"walletversion" : 60000

Quote

{
   "139.59.255.88:9340" : "ENABLED",
   "146.0.32.101:9340" : "ENABLED",
   "192.99.73.200:9340" : "ENABLED"
}

both of you, please update your thrones wallet from github
and your windows wallet via OP of this thread

this should fix all your problems.

This hardfork has been a bumpy ride, and i apologies to everyone, we are setting up procedures on how things will be from here on out
this latest wallet will support the hardforking happening sunday 25th at 10 AM UTC

The hard fork that we haven't announced yet Grin

We're implementing Dark Gravity Wave so we can enjoy more rapid diff adjustments.

We've been squeezed by a few >1Ph pools in the last few weeks and it is creating a bit too much of a sell pressure to be healthy.

Block explorer reported I was/am on correct chain, I git cloned directly from your GitHub . I hope that ccex and the block explorer have updated to the latest from GitHub because that's the place we are getting the latest src from. Now, the second master node I have thrown up today is getting rewards and I am double checking the first one that was reportedly getting most the rewards that M8BWNNRFMNdak68c mentioned. We are trying to help with this;
"159.203.31.42:9340" : "ENABLED",
"146.0.32.101:9340" : "ENABLED",
"192.99.73.200:9340" : "ENABLED"
fresh master node from src today- this is whats it's reporting with "throne list", it was reporting back the one mentioned but I am double checking it currently and it is expired until then.

This is what I can see from the console on one of my Thrones. I can only see two of those three IPs.

My thought is that it is essential that you are running the same wallet version locally and remote. We screwed up and while Git was updated, the builds in OP were still for 700010. If you have 700020 remote and 700010 locally, could that explain the problem?

Code:

{
" 80.233.175.26:9340" : " ENABLED 70010 1FmEkTTa18s5PmuzDrR3hFkmd7ceFNYrH9 2470ff73f777249046334b6fccc029a5492dd82e63dcc2efad738ddf14d8c0e0 1474377338 1126706",
" 167.114.249.190:9340" : " ENABLED 70010 17u9YpYmVv1JLg389FnVnSPEXUvXXv6BK6 0304566d46efd2be4056ffce7557eb1827414ae3eda4fbe001f713ef31e780df 1474377844 1909132",
" 149.202.170.238:9340" : " ENABLED 70010 1LV6hX9BqR1i42JFGv1DZ7g3LG2Hy8p2Pe 13b8fac7f8d471a9da5d6ee2aaa7a321acb85ec973e686474acac3e2e860c43a 1474378629 1909935",
" 149.202.164.150:9340" : " ENABLED 70010 1Biby5dYYG1YSDpXBFbbukpg6DCZpbUQQ9 0461a3f6ebf0e213a1a223f22a9dcf8ac024bb7e8e5d770ff15c5f07058e68bb 1474378536 1307188",
" 149.202.170.56:9340" : " ENABLED 70010 1PkvXnRsDbqbJ9SLh7rFyEGM2e5Np8SxWw 6809f235f344eedd4f17ba8386f2afb1c5c540faa7ffe7857d87e002f97126e4 1474375536 1906835",
" 108.61.10.90:9340" : " ENABLED 70010 158JhEUUuQLe1qMHNa2cX6debdSHpvxt5P 2ca33107605864737cb7ef297452d67da31e768b9d15446373818bf371bd3ed2 1474377661 967790",
" 163.172.64.208:9340" : " ENABLED 70010 1P8PWUyYifD9gEmFKNhfgt6ENnfRtXvbwH e25fd6ba424bb3d802979e7af55f6d1cfb114b23206ec2aba92669460389d871 1474378835 1024668",
" 92.222.9.28:9340" : " ENABLED 70010 1GAHKmGtUE25gHMwmnFgdEoYVq6WyU8FAp 409b833dedee3165021083ae84851a5f497fa91c6eda2ef7ff3208191c386809 1474378900 875777",
" 149.202.170.236:9340" : " ENABLED 70010 13snuFwJGChyPFS3ySZsywoJN9eGeUtnb8 1c288c3f4d96376c4b2d985c60d46f04be1180d7d01e7c9bccbd082dbd82a8f1 1474378818 1910123",
" 158.69.66.51:9340" : " ENABLED 70010 1nBo67JM4sMDjRmgUuKBimWG15swDFuwY d2dbc33150185dd3814c56af018c8bb4424a614003deb2fa50d6fea4802b582b 1474378851 1910144",
" 158.69.66.52:9340" : " ENABLED 70010 1AhZE9VhexN5ctscdFd554fB67br9rYaPN db4d40779384a36f3f38b20ab08b8c268aa113ec3e8f4f0e1857037dd41865e1 1474378894 1910186",
" 163.172.177.131:9340" : " ENABLED 70010 1NYxtDcjFxUtsmjcaoHjt5LnjAHgDmGe59 eee3968601be050afc5f732822fd87a6c8a3124ad0235e47f20ef33fe8019ba5 1474377195 1012172",
" 45.32.156.157:9340" : " ENABLED 70010 1Fe9jBtqxJVcaLTmtYmcxy9noSpGunkkFY 67e5e9bc420b9e274eb35bd1329a8228e8cee214e374acb7e1513fc6301f48ef 1474377169 943597",
" 158.69.66.54:9340" : " ENABLED 70010 1ASDZcVWQ9McVHuSqQXdDFefkEHNY11tTc 7cc0f4b0d39e17af4cd82e1962d3ec68766097b23c21eaa38755187ec7ecb9f1 1474377816 1830926",
" 51.254.131.226:9340" : " ENABLED 70010 12F8KzzZAmceAEb2evCcYYgnZdTVutMUcA 409b833dedee3165021083ae84851a5f497fa91c6eda2ef7ff3208191c386809 1474378315 1193199",
" 149.202.170.35:9340" : " ENABLED 70010 1ALMjFg4zw5p23apYu6oAzQB6vaCkBSS4g 1ecde6006ff296e07388b5b497267621f9d31abce97a0f6dc9ba1a9ab910ec46 1474377495 1908799",
" 158.69.66.58:9340" : " ENABLED 70010 1LapNMzHBrPrRyNoJrvyBLL3TQ3J8nx7tT cff2134ec924e61ed6080ad1aca8c07b039804f5551960b1fbb3eefd46473adb 1474378409 1831331",
" 149.202.170.53:9340" : " ENABLED 70010 1PoD3oFQ58dzxbaHwJhM9FHegCasNLatnQ 3b5c92fcdbfe1aed74c82ca025cee3736f78a8f4dc81476c40a7bf0b34a48c2e 1474377289 1908591",
" 149.202.170.34:9340" : " ENABLED 70010 1Lgqxw8nNezeAJf1mG5Q3RwkerhhoWu7W6 29c97be3faa4b0eaadea18bca90a9364e0fbc4f039d36d3dd0456d7d866770df 1474377295 1908598",
" 149.202.171.123:9340" : " ENABLED 70010 1F6CTu95hqj7mcX3n6Tra4JnuXQMZzo82F 5c12cab8cf7f44bb6129759da52c074d1ef96b1870ef3c679342dd0f43a30efa 1474377961 1909262",
" 149.202.170.48:9340" : " ENABLED 70010 12RgvqhMbe4HhfHKCFLaD3CTSYyxKBNQVg 405c27cf8fd21f26fe02ef3fa261cc22e674e7a684ffecbd8ad2a9f7d3b04682 1474378594 1909895",
" 149.202.170.46:9340" : " ENABLED 70010 1Nd8ymnyNcBKLgrYFE55WmqJYgmtVKjmDL 5d9b65b1a4a73a801fb82ba3100db51eaf36ce2f1cd5ddfa408af65f32d775ab 1474377333 1908633",
" 158.69.94.122:9340" : " ENABLED 70010 15fbYwJG8JWAMtzcRUUNiLLrmfdspx3ZV9 68cd01ffd7a01829f9295f82d6f6a2c93e5dbc2ac8411d51ffe94c45a6ad1421 1474377397 1830585",
" 167.114.246.82:9340" : " ENABLED 70010 1NXYxUp6AXoRsAjZbypRmKNXyEHKE4BVSb 692b5f3fb863c2601c3df8d7b975d80d75cdccf7fcb9c85ea65cf0a348c733d5 1474377488 1908777",
" 158.69.66.49:9340" : " ENABLED 70010 1Cg2dfzMu97g4G39SUWTrrwCMMfkKt7PDS f32274c54705cbdafff6bf02821dbdf9ff02483e3bfcb647061156b4fd2719be 1474377883 1909174",
" 158.69.66.50:9340" : " ENABLED 70010 1D3abmwgPhdiEMdKQDNMEGD5gSzMN5QWRv f541f7b36435593ca1c671e42adb71ed665b2948b9cf8b9b87ed2c8b6ea51ffd 1474378108 1909398",
" 158.69.66.59:9340" : " ENABLED 70010 1N1tqyb2GDXX9398a8DpSTF7pvQtvbfHWc 996282f85939f61088be89bd3e9cd05ad6973c89feed1f6b96634122ec88d471 1474378305 1831323",
" 158.69.66.57:9340" : " ENABLED 70010 1GoL6ptSouurGkmg3XByFsgzzBNaLpPMVH d14aedd6cdb2018253771fcd0d09576d75ef152c36a644b5c6efd3dbfbb612ee 1474378421 1831334",
" 75.130.163.51:9340" : " ENABLED 70010 13rcHZcDRExcn6xEUcqt6w8ZE7Hhiw35H2 af59b2f9e4a835a756898c4156f445334a36ac9b76d6fba4cef1b2d7cfb9a573 1474378221 650722",
" 158.69.66.6:9340" : " ENABLED 70010 1FEwwtpbdxU71XJDoMV8JyTNA4Vixgucrr b32ed6918604410d1d4bfd1dcb8c8f8fec25a6aa09704c68983d1f69f842fa16 1474378354 1831283",
" 91.134.143.187:9340" : " ENABLED 70010 1Q555PD2RuHm8YKKhuWGhrtGV8ps8MTWFd ef73c4b9c1844f5fca0921d7c40a082693d3913174cd1521f8819a38cc5b48bf 1474378255 68455",
" 159.203.31.42:9340" : " ENABLED 70020 13o6pVPzTcFzS3qJLsMAJet6gRbXs1ARQa 6b42f4c9221be40565baae58da6a5edb21a3250f265f4fe04bc933ed216dfc3f 1474378456 7232",
" 192.99.73.200:9340" : " ENABLED 70020 1CUeDmYn4RWEpxs8wbKUQSYEPgRitAJ4UQ 371a02c8774121fb97bc92e4d4782810a7cd0c4598c2a2d547c7690adbb33a72 1474377442 3627"
}

ACP

hero member

Activity: 612

Merit: 520

Quote from: stonehedge on September 20, 2016, 08:19:35 AM

Quote from: CHAOSiTEC on September 20, 2016, 07:59:56 AM

Quote from: M8BWNNRFMNdak68c on September 20, 2016, 07:53:51 AM

jep.. from github..

Quote

"version" : 90200,
"protocolversion" : 70020,
"walletversion" : 60000

Quote

{
   "139.59.255.88:9340" : "ENABLED",
   "146.0.32.101:9340" : "ENABLED",
   "192.99.73.200:9340" : "ENABLED"
}

both of you, please update your thrones wallet from github
and your windows wallet via OP of this thread

this should fix all your problems.

This hardfork has been a bumpy ride, and i apologies to everyone, we are setting up procedures on how things will be from here on out
this latest wallet will support the hardforking happening sunday 25th at 10 AM UTC

The hard fork that we haven't announced yet Grin

We're implementing Dark Gravity Wave so we can enjoy more rapid diff adjustments.

We've been squeezed by a few >1Ph pools in the last few weeks and it is creating a bit too much of a sell pressure to be healthy.

Block explorer reported I was/am on correct chain, I git cloned directly from your GitHub . I hope that ccex and the block explorer have updated to the latest from GitHub because that's the place we are getting the latest src from. Now, the second master node I have thrown up today is getting rewards and I am double checking the first one that was reportedly getting most the rewards that M8BWNNRFMNdak68c mentioned. We are trying to help with this;
"159.203.31.42:9340" : "ENABLED",
"146.0.32.101:9340" : "ENABLED",
"192.99.73.200:9340" : "ENABLED"
fresh master node from src today- this is whats it's reporting with "throne list", it was reporting back the one mentioned but I am double checking it currently and it is expired until then.

stonehedge

legendary

Activity: 1722

Merit: 1002

Decentralize Everything

Quote from: CHAOSiTEC on September 20, 2016, 07:59:56 AM

Quote from: M8BWNNRFMNdak68c on September 20, 2016, 07:53:51 AM

jep.. from github..

Quote

"version" : 90200,
"protocolversion" : 70020,
"walletversion" : 60000

Quote

{
   "139.59.255.88:9340" : "ENABLED",
   "146.0.32.101:9340" : "ENABLED",
   "192.99.73.200:9340" : "ENABLED"
}

both of you, please update your thrones wallet from github
and your windows wallet via OP of this thread

this should fix all your problems.

This hardfork has been a bumpy ride, and i apologies to everyone, we are setting up procedures on how things will be from here on out
this latest wallet will support the hardforking happening sunday 25th at 10 AM UTC

The hard fork that we haven't announced yet Grin

We're implementing Dark Gravity Wave so we can enjoy more rapid diff adjustments.

We've been squeezed by a few >1Ph pools in the last few weeks and it is creating a bit too much of a sell pressure to be healthy.

CHAOSiTEC

legendary

Activity: 1358

Merit: 1002

Quote from: M8BWNNRFMNdak68c on September 20, 2016, 07:53:51 AM

jep.. from github..

Quote

"version" : 90200,
"protocolversion" : 70020,
"walletversion" : 60000

Quote

{
   "139.59.255.88:9340" : "ENABLED",
   "146.0.32.101:9340" : "ENABLED",
   "192.99.73.200:9340" : "ENABLED"
}

both of you, please update your thrones wallet from github
and your windows wallet via OP of this thread

this should fix all your problems.

This hardfork has been a bumpy ride, and i apologies to everyone, we are setting up procedures on how things will be from here on out
this latest wallet will support the hardforking happening sunday 25th at 10 AM UTC

defunctec

legendary

Activity: 1092

Merit: 1000

Quote from: ACP on September 20, 2016, 06:44:48 AM

Quote from: M8BWNNRFMNdak68c on September 20, 2016, 01:40:52 AM

so now i got a throne running an 9340 and receive payments. but

1.) can i anyhow bypass this port restriction ( and run two masternodes on one IP )?

2.) i now only see two masternodes: ( the second ins mine and belongs to 127upReTKmcsw9AbvadUnsNwrX4KZLuNqM )

Quote

throne list
{
"139.59.255.88:9340" : "ENABLED",
"146.0.32.101:9340" : "ENABLED"
}

I can see the same
only two ,
Running GitHub master branch
You should see a third populate soon.

Sorry guys, if you use the OP to download the latest LOCAL wallet you should see the rest of the thrones.

If your LOCAL is windows, download latest windows wallet.

Your remote side shouldn't need touching

Thanks for the help

M8BWNNRFMNdak68c

sr. member

Activity: 373

Merit: 250

jep.. from github..

Quote

"version" : 90200,
"protocolversion" : 70020,
"walletversion" : 60000

Quote

{
"139.59.255.88:9340" : "ENABLED",
"146.0.32.101:9340" : "ENABLED",
"192.99.73.200:9340" : "ENABLED"
}

Topic: [ANN][CRW] CROWN (SHA256) | Platform | Governance | Systemnodes | Masternodes | - page 208. (Read 317079 times)