Of course I did not delete anything. I followed word by word . now will dowload TV
Ok send me a message when you're ready.
Topic: [ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency - page 3751. (Read 9723733 times)
October 16, 2014, 11:50:17 AM
Ok send me a message when you're ready.
October 16, 2014, 11:46:04 AM
[/quote]
It sounds like you've now created three wallets. Do not delete anything! I'm not using Windows but I believe if you should open control panel, go to folder options and enable "show file extensions".
After that you should see the .dat, .dat.old, .dat.new modifiers.
Once again though, if you download teamviewer, I'll fix it for you.
[/quote]
Of course I did not delete anything. I followed word by word . now will dowload TV
October 16, 2014, 11:43:28 AM
can someone please show a way updating my wallet to the latest...i mean i just need to replace the wallet.dat file??or is more complecated??and i want also to setup 12 masternodes !! can this be done by me on windows just following the guides or i do need help?
on windows on the search bar type in:
%appdata%
A folder will pop up. Go to Roaming and then Darkcoin.
Inside the darkcoin folder, you'll see a "wallet.dat" file.
Rename it to "wallet.dat.old" and then start the new QT. This will generate a new wallet. Copy the first address to a notepad and close the wallet.
Back in the Darkcoin folder, rename the "wallet.dat" file to wallet.dat.new and rename the "wallet.dat.old" to "wallet.dat"
Open QT again. Send your entire balance to the new address and let it get one confirmation. After that, close QT, rename "wallet.dat" to "wallet.dat.old" and "wallet.dat.new" to "wallet.dat".
Open QT again. Now your entire balance should be in the new wallet format.
If you have trouble with this, I don't recommend you trying to run your own Masternode.
Why not simply run new wallet over old?
Because the keypool size changed from 100 to 1000.
Great. I did it and... when I first opened new QT there was 1 adress. I did all as said, copied that to notepad and closed wallet. changed wallet.dat as said, and at the end when opened new wallet again: nothing. ! And adress at receive is not the same now?? Help?
Did you send your funds to the new address you copied from the new wallet? That's what you need to do in the old wallet. If you are partial to the receiving address of the old wallet, you need to go to the console and dump the private key, then import it into the new wallet.
I dont know how to dump privkey. I see I just sent All from old wallet to one adress and my new QT has some new adress woth zero funds. Where is that privkey, is it wallet.bak ( new file in darkcoin folder?
It sounds like you've now created three wallets. Do not delete anything! I'm not using Windows but I believe if you should open control panel, go to folder options and enable "show file extensions".
After that you should see the .dat, .dat.old, .dat.new modifiers.
Once again though, if you download teamviewer, I'll fix it for you.
October 16, 2014, 11:39:12 AM
can someone please show a way updating my wallet to the latest...i mean i just need to replace the wallet.dat file??or is more complecated??and i want also to setup 12 masternodes !! can this be done by me on windows just following the guides or i do need help?
on windows on the search bar type in:
%appdata%
A folder will pop up. Go to Roaming and then Darkcoin.
Inside the darkcoin folder, you'll see a "wallet.dat" file.
Rename it to "wallet.dat.old" and then start the new QT. This will generate a new wallet. Copy the first address to a notepad and close the wallet.
Back in the Darkcoin folder, rename the "wallet.dat" file to wallet.dat.new and rename the "wallet.dat.old" to "wallet.dat"
Open QT again. Send your entire balance to the new address and let it get one confirmation. After that, close QT, rename "wallet.dat" to "wallet.dat.old" and "wallet.dat.new" to "wallet.dat".
Open QT again. Now your entire balance should be in the new wallet format.
If you have trouble with this, I don't recommend you trying to run your own Masternode.
Why not simply run new wallet over old?
Because the keypool size changed from 100 to 1000.
Great. I did it and... when I first opened new QT there was 1 adress. I did all as said, copied that to notepad and closed wallet. changed wallet.dat as said, and at the end when opened new wallet again: nothing. ! And adress at receive is not the same now?? Help?
Did you send your funds to the new address you copied from the new wallet? That's what you need to do in the old wallet. If you are partial to the receiving address of the old wallet, you need to go to the console and dump the private key, then import it into the new wallet.
I dont know how to dump privkey. I see I just sent All from old wallet to one adress and my new QT has some new adress woth zero funds. Where is that privkey, is it wallet.bak ( new file in darkcoin folder?
October 16, 2014, 11:33:30 AM
Hi,
sorry if this has been addressed already but I was trying to download a drk wallet from darkcoin.io but when I press on the windows (32-bit) option is says the page is not found? tried it an several computers in my house but all the same. Is this a problem on my side?
thanks
sorry if this has been addressed already but I was trying to download a drk wallet from darkcoin.io but when I press on the windows (32-bit) option is says the page is not found? tried it an several computers in my house but all the same. Is this a problem on my side?
thanks
October 16, 2014, 11:33:27 AM
can someone please show a way updating my wallet to the latest...i mean i just need to replace the wallet.dat file??or is more complecated??and i want also to setup 12 masternodes !! can this be done by me on windows just following the guides or i do need help?
on windows on the search bar type in:
%appdata%
A folder will pop up. Go to Roaming and then Darkcoin.
Inside the darkcoin folder, you'll see a "wallet.dat" file.
Rename it to "wallet.dat.old" and then start the new QT. This will generate a new wallet. Copy the first address to a notepad and close the wallet.
Back in the Darkcoin folder, rename the "wallet.dat" file to wallet.dat.new and rename the "wallet.dat.old" to "wallet.dat"
Open QT again. Send your entire balance to the new address and let it get one confirmation. After that, close QT, rename "wallet.dat" to "wallet.dat.old" and "wallet.dat.new" to "wallet.dat".
Open QT again. Now your entire balance should be in the new wallet format.
If you have trouble with this, I don't recommend you trying to run your own Masternode.
Why not simply run new wallet over old?
Because the keypool size changed from 100 to 1000.
Great. I did it and... when I first opened new QT there was 1 adress. I did all as said, copied that to notepad and closed wallet. changed wallet.dat as said, and at the end when opened new wallet again: nothing. ! And adress at receive is not the same now?? Help?
If you download teamviewer, I'll fix it for you. http://www.teamviewer.com/en/download/windows.aspx
October 16, 2014, 11:31:32 AM
Nice wallpaper.. looking for higher resolution..
October 16, 2014, 11:31:03 AM
I'd just like to interject with a public service message.
I just deleted a wallet.dat containing over 10,000 DRK.
Even though I knew that I had redundant secure backups the last five minutes has been awful.
BACK EVERYTHING UP ALL THE TIME!
I just deleted a wallet.dat containing over 10,000 DRK.
Even though I knew that I had redundant secure backups the last five minutes has been awful.
BACK EVERYTHING UP ALL THE TIME!
Yes! BACKUP! It's very very important to have several copies your wallet.dat, always on different medias.
I am never confortable unless I dump my private keys and put them on paper wallets (always being careful with eventual change adresses)
I do the same, before puting it on usb or some memorystick I dumpprivkey first! - my early days with bitcoinqt wallet was hmmmm quite expensive when I did format of my harddisk and could restore with some tools my wallet.dat... lessons are expensive but once you learn them you will never do the same mistake anymore. (only ppl who camo call them idiots do the same mistakes one time after another)
October 16, 2014, 11:29:53 AM
can someone please show a way updating my wallet to the latest...i mean i just need to replace the wallet.dat file??or is more complecated??and i want also to setup 12 masternodes !! can this be done by me on windows just following the guides or i do need help?
on windows on the search bar type in:
%appdata%
A folder will pop up. Go to Roaming and then Darkcoin.
Inside the darkcoin folder, you'll see a "wallet.dat" file.
Rename it to "wallet.dat.old" and then start the new QT. This will generate a new wallet. Copy the first address to a notepad and close the wallet.
Back in the Darkcoin folder, rename the "wallet.dat" file to wallet.dat.new and rename the "wallet.dat.old" to "wallet.dat"
Open QT again. Send your entire balance to the new address and let it get one confirmation. After that, close QT, rename "wallet.dat" to "wallet.dat.old" and "wallet.dat.new" to "wallet.dat".
Open QT again. Now your entire balance should be in the new wallet format.
If you have trouble with this, I don't recommend you trying to run your own Masternode.
Why not simply run new wallet over old?
Because the keypool size changed from 100 to 1000.
Great. I did it and... when I first opened new QT there was 1 adress. I did all as said, copied that to notepad and closed wallet. changed wallet.dat as said, and at the end when opened new wallet again: nothing. ! And adress at receive is not the same now?? Help?
Right now, before making any changes. Create a duplicate back up of ALL wallet.dat files. Inlcuding any .old or .new.
October 16, 2014, 11:29:45 AM
can someone please show a way updating my wallet to the latest...i mean i just need to replace the wallet.dat file??or is more complecated??and i want also to setup 12 masternodes !! can this be done by me on windows just following the guides or i do need help?
on windows on the search bar type in:
%appdata%
A folder will pop up. Go to Roaming and then Darkcoin.
Inside the darkcoin folder, you'll see a "wallet.dat" file.
Rename it to "wallet.dat.old" and then start the new QT. This will generate a new wallet. Copy the first address to a notepad and close the wallet.
Back in the Darkcoin folder, rename the "wallet.dat" file to wallet.dat.new and rename the "wallet.dat.old" to "wallet.dat"
Open QT again. Send your entire balance to the new address and let it get one confirmation. After that, close QT, rename "wallet.dat" to "wallet.dat.old" and "wallet.dat.new" to "wallet.dat".
Open QT again. Now your entire balance should be in the new wallet format.
If you have trouble with this, I don't recommend you trying to run your own Masternode.
Why not simply run new wallet over old?
Because the keypool size changed from 100 to 1000.
Great. I did it and... when I first opened new QT there was 1 adress. I did all as said, copied that to notepad and closed wallet. changed wallet.dat as said, and at the end when opened new wallet again: nothing. ! And adress at receive is not the same now?? Help?
Did you send your funds to the new address you copied from the new wallet? That's what you need to do in the old wallet. If you are partial to the receiving address of the old wallet, you need to go to the console and dump the private key, then import it into the new wallet.
October 16, 2014, 11:28:52 AM
I'd just like to interject with a public service message.
I just deleted a wallet.dat containing over 10,000 DRK.
Even though I knew that I had redundant secure backups the last five minutes has been awful.
BACK EVERYTHING UP ALL THE TIME!
I just deleted a wallet.dat containing over 10,000 DRK.
Even though I knew that I had redundant secure backups the last five minutes has been awful.
BACK EVERYTHING UP ALL THE TIME!
Yes! BACKUP! It's very very important to have several copies your wallet.dat, always on different medias.
I am never confortable unless I dump my private keys and put them on paper wallets (always being careful with eventual change adresses)
October 16, 2014, 11:28:50 AM
I'd just like to interject with a public service message.
I just deleted a wallet.dat containing over 10,000 DRK.
Even though I knew that I had redundant secure backups the last five minutes has been awful.
BACK EVERYTHING UP ALL THE TIME!
Run 10 masternodes. That way you'll only lose 1000 at a time. I just deleted a wallet.dat containing over 10,000 DRK.
Even though I knew that I had redundant secure backups the last five minutes has been awful.
BACK EVERYTHING UP ALL THE TIME!
I hope your backups are OK.
October 16, 2014, 11:27:10 AM
option 5. Friend of the family wants some DRK
I knew it! Evan has all his family IN so you can assume long live dark I`m ALL IN TOO EVAN, FOLLOW YOU!
We need some more friends like Bill Gates, Eric Schmidt, ...
hehe
you never know POOL FRIENDLY REMINDER - STATUS ON
darkcointalkorg updated
xpool updated
October 16, 2014, 11:26:40 AM
can someone please show a way updating my wallet to the latest...i mean i just need to replace the wallet.dat file??or is more complecated??and i want also to setup 12 masternodes !! can this be done by me on windows just following the guides or i do need help?
on windows on the search bar type in:
%appdata%
A folder will pop up. Go to Roaming and then Darkcoin.
Inside the darkcoin folder, you'll see a "wallet.dat" file.
Rename it to "wallet.dat.old" and then start the new QT. This will generate a new wallet. Copy the first address to a notepad and close the wallet.
Back in the Darkcoin folder, rename the "wallet.dat" file to wallet.dat.new and rename the "wallet.dat.old" to "wallet.dat"
Open QT again. Send your entire balance to the new address and let it get one confirmation. After that, close QT, rename "wallet.dat" to "wallet.dat.old" and "wallet.dat.new" to "wallet.dat".
Open QT again. Now your entire balance should be in the new wallet format.
If you have trouble with this, I don't recommend you trying to run your own Masternode.
Why not simply run new wallet over old?
Because the keypool size changed from 100 to 1000.
Great. I did it and... when I first opened new QT there was 1 adress. I did all as said, copied that to notepad and closed wallet. changed wallet.dat as said, and at the end when opened new wallet again: nothing. ! And adress at receive is not the same now?? Help?
October 16, 2014, 11:22:39 AM
The DarkcoinTalk Pool has been updated for the new daemon and payment system. Currently there are 37 Masternodes on the network. If you are mining or are a MN operator, you'll want to mine on a pool that has been updated to the latest version.
You'd be hard pressed to find a pool that updates as frequently and quickly as the DarkcoinTalk pool.
Support is also top notch too!
You'd be hard pressed to find a pool that updates as frequently and quickly as the DarkcoinTalk pool.
Support is also top notch too!
October 16, 2014, 11:21:04 AM
I'd just like to interject with a public service message.
I just deleted a wallet.dat containing over 10,000 DRK.
Even though I knew that I had redundant secure backups the last five minutes has been awful.
BACK EVERYTHING UP ALL THE TIME!
I just deleted a wallet.dat containing over 10,000 DRK.
Even though I knew that I had redundant secure backups the last five minutes has been awful.
BACK EVERYTHING UP ALL THE TIME!
October 16, 2014, 11:18:08 AM
Why not simply run new wallet over old?
[/quote]
Because the keypool size changed from 100 to 1000.
[/quote]
Aha, TKS!
[/quote]
So you have two options:
1. Send your funds to a newly generated wallet.dat file
2. If you are partial to the address, dump your private key and then import into a newly generated wallet.dat file
October 16, 2014, 11:16:31 AM
[/quote]
Why not simply run new wallet over old?
[/quote]
Because the keypool size changed from 100 to 1000.
[/quote]
Aha, TKS!
October 16, 2014, 11:05:59 AM
can someone please show a way updating my wallet to the latest...i mean i just need to replace the wallet.dat file??or is more complecated??and i want also to setup 12 masternodes !! can this be done by me on windows just following the guides or i do need help?
on windows on the search bar type in:
%appdata%
A folder will pop up. Go to Roaming and then Darkcoin.
Inside the darkcoin folder, you'll see a "wallet.dat" file.
Rename it to "wallet.dat.old" and then start the new QT. This will generate a new wallet. Copy the first address to a notepad and close the wallet.
Back in the Darkcoin folder, rename the "wallet.dat" file to wallet.dat.new and rename the "wallet.dat.old" to "wallet.dat"
Open QT again. Send your entire balance to the new address and let it get one confirmation. After that, close QT, rename "wallet.dat" to "wallet.dat.old" and "wallet.dat.new" to "wallet.dat".
Open QT again. Now your entire balance should be in the new wallet format.
If you have trouble with this, I don't recommend you trying to run your own Masternode.
Why not simply run new wallet over old?
Because the keypool size changed from 100 to 1000.
October 16, 2014, 11:02:38 AM
can someone please show a way updating my wallet to the latest...i mean i just need to replace the wallet.dat file??or is more complecated??and i want also to setup 12 masternodes !! can this be done by me on windows just following the guides or i do need help?
on windows on the search bar type in:
%appdata%
A folder will pop up. Go to Roaming and then Darkcoin.
Inside the darkcoin folder, you'll see a "wallet.dat" file.
Rename it to "wallet.dat.old" and then start the new QT. This will generate a new wallet. Copy the first address to a notepad and close the wallet.
Back in the Darkcoin folder, rename the "wallet.dat" file to wallet.dat.new and rename the "wallet.dat.old" to "wallet.dat"
Open QT again. Send your entire balance to the new address and let it get one confirmation. After that, close QT, rename "wallet.dat" to "wallet.dat.old" and "wallet.dat.new" to "wallet.dat".
Open QT again. Now your entire balance should be in the new wallet format.
If you have trouble with this, I don't recommend you trying to run your own Masternode.
Why not simply run new wallet over old?
Jump to: