Topic: [ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency - page 4451. (Read 9723733 times)
August 13, 2014, 10:56:09 AM
I'm getting a MN count of 179. I'm guessing most people haven't had the opportunity to upgrade yet.
August 13, 2014, 10:54:59 AM
Does "masternode list" in RC4 windows wallet show a list of MN for everyone? I don't have any show up. Wondering if this command is deprecated or why I am not showing any MN?
Yep I get a massive list when I type it.
list and count works fine. Maybe in stable version it does not work. You have to use v.10.12.25 not v.09.12.25
August 13, 2014, 10:53:20 AM
Does "masternode list" in RC4 windows wallet show a list of MN for everyone? I don't have any show up. Wondering if this command is deprecated or why I am not showing any MN?
Yep I get a massive list when I type it.
August 13, 2014, 10:51:12 AM
rc4 launch but... decepcion price 
darkcoin to the floor
darkcoin to the floorsome speculate spork will fail, but it won´t fail
There is no spork. If you want to use the new Darksend+, you download the RC4 wallet. If you don't, you're free to continue using the RC3 wallet.
Well enforcement will be turned on later...
August 13, 2014, 10:50:32 AM
Getting this "transaction not valid" message everytime.
Quote
2014-08-13 15:16:04 CDarkSendPool::SendMoney() - Added transaction to pool.
2014-08-13 15:16:04 RelayDarkSendIn - found master, relaying message - 54.92.60.123:9999
2014-08-13 15:16:04 DoAutomaticDenominating : Running darksend denominate. Return ''
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 2
2014-08-13 15:16:05 DarkSendStatusUpdate - state: 2 entriesCount: 0 accepted: 0 error: transaction not valid
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 6
2014-08-13 15:16:05 darkSend Status => ERROR : transaction not valid
2014-08-13 15:16:06 Added 288 addresses from 54.92.60.123: 74 tried, 10336 new
2014-08-13 15:16:06 Added 287 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Added 170 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Flushing wallet.dat
2014-08-13 15:16:06 Flushed wallet.dat 12ms
2014-08-13 15:16:15 CDarkSendPool::Check() -- RESETTING MESSAGE
2014-08-13 15:16:15 darkSend Status => Idle
2014-08-13 15:16:04 RelayDarkSendIn - found master, relaying message - 54.92.60.123:9999
2014-08-13 15:16:04 DoAutomaticDenominating : Running darksend denominate. Return ''
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 2
2014-08-13 15:16:05 DarkSendStatusUpdate - state: 2 entriesCount: 0 accepted: 0 error: transaction not valid
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 6
2014-08-13 15:16:05 darkSend Status => ERROR : transaction not valid
2014-08-13 15:16:06 Added 288 addresses from 54.92.60.123: 74 tried, 10336 new
2014-08-13 15:16:06 Added 287 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Added 170 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Flushing wallet.dat
2014-08-13 15:16:06 Flushed wallet.dat 12ms
2014-08-13 15:16:15 CDarkSendPool::Check() -- RESETTING MESSAGE
2014-08-13 15:16:15 darkSend Status => Idle
What are you actually trying to do?
If the wallet is denominating then you need to WAIT until it is finished. It may take several hours depending on the number of coins you have and the number of rounds.
I was trying to upgrade from the stable version to the rc4 version and get the same debug messages as the quote above.
Same question to you.well i thought something was wrong reading those debug msgs (like 'transaction not valid and such'). Or is this normal ?
Before you can use darksend, the coins you want to send via darksend have to denominate.
This process takes a while. It depends on how much denominate rounds you have in your config.
Also this denomination uses a few transactions you have to pay tx fees for it.
As soon as you have anon balance available you are able to send.
If you need to send coins without darksend configure "disable darksend"
For further information have a look here -> https://darkcointalk.org/threads/rc4-launch.2033/
Any more questions ? Feel free to join www.darkcointalk.org
This board here is getting more and more worse. First hand information over there !
August 13, 2014, 10:49:21 AM
Does "masternode list" in RC4 windows wallet show a list of MN for everyone? I don't have any show up. Wondering if this command is deprecated or why I am not showing any MN?
August 13, 2014, 10:48:30 AM
Hi Dev Team.
The OP should be updated to clearly state the RC4 version to download. Should also clearly state that Windows version of RC4 wallet coming soon. And there should a couple of DRK ambassadors on the thread to help those that need assistance. Thoughts?
The OP should be updated to clearly state the RC4 version to download. Should also clearly state that Windows version of RC4 wallet coming soon. And there should a couple of DRK ambassadors on the thread to help those that need assistance. Thoughts?
Windows wallet is already out.
Direct Download: https://raw.githubusercontent.com/darkcoinproject/darkcoin-binaries/master/rc/darkcoin-0.10.12.25-win.zip
https://www.darkcoin.io/getstarted.html
Thanks?
August 13, 2014, 10:47:31 AM
rc4 launch but... decepcion price darkcoin to the floor
darkcoin to the floorsome speculate spork will fail, but it won´t fail
There is no spork. If you want to use the new Darksend+, you download the RC4 wallet. If you don't, you're free to continue using the RC3 wallet.
August 13, 2014, 10:46:07 AM
Getting this "transaction not valid" message everytime.
Quote
2014-08-13 15:16:04 CDarkSendPool::SendMoney() - Added transaction to pool.
2014-08-13 15:16:04 RelayDarkSendIn - found master, relaying message - 54.92.60.123:9999
2014-08-13 15:16:04 DoAutomaticDenominating : Running darksend denominate. Return ''
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 2
2014-08-13 15:16:05 DarkSendStatusUpdate - state: 2 entriesCount: 0 accepted: 0 error: transaction not valid
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 6
2014-08-13 15:16:05 darkSend Status => ERROR : transaction not valid
2014-08-13 15:16:06 Added 288 addresses from 54.92.60.123: 74 tried, 10336 new
2014-08-13 15:16:06 Added 287 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Added 170 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Flushing wallet.dat
2014-08-13 15:16:06 Flushed wallet.dat 12ms
2014-08-13 15:16:15 CDarkSendPool::Check() -- RESETTING MESSAGE
2014-08-13 15:16:15 darkSend Status => Idle
2014-08-13 15:16:04 RelayDarkSendIn - found master, relaying message - 54.92.60.123:9999
2014-08-13 15:16:04 DoAutomaticDenominating : Running darksend denominate. Return ''
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 2
2014-08-13 15:16:05 DarkSendStatusUpdate - state: 2 entriesCount: 0 accepted: 0 error: transaction not valid
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 6
2014-08-13 15:16:05 darkSend Status => ERROR : transaction not valid
2014-08-13 15:16:06 Added 288 addresses from 54.92.60.123: 74 tried, 10336 new
2014-08-13 15:16:06 Added 287 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Added 170 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Flushing wallet.dat
2014-08-13 15:16:06 Flushed wallet.dat 12ms
2014-08-13 15:16:15 CDarkSendPool::Check() -- RESETTING MESSAGE
2014-08-13 15:16:15 darkSend Status => Idle
What are you actually trying to do?
If the wallet is denominating then you need to WAIT until it is finished. It may take several hours depending on the number of coins you have and the number of rounds.
I was trying to upgrade from the stable version to the rc4 version and get the same debug messages as the quote above.
Same question to you.well i thought something was wrong reading those debug msgs (like 'transaction not valid and such'). Or is this normal ?
A lot of debugging lines where added by Evan during the test phase and he just probably forgot to remove all of them. You coins will eventually show up as anonymized. So long as that happens then there is no problem.
August 13, 2014, 10:45:15 AM
Glad that the launch was not hyped. I'm getting really tired of the traders and their expectations. The price will go up with organic growth and real world use. If you want a pump and dump, there are better options. I even doubt the price will go up significantly in the near term. There will be bugs, because that's software development. In spite of that, I think Darkcoin has a lot going for it. What encourages me is Evan's dedication and commitment to getting it done.
August 13, 2014, 10:42:53 AM
rc4 launch but... decepcion price darkcoin to the floor
darkcoin to the floorsome speculate spork will fail, but it won´t fail
August 13, 2014, 10:41:27 AM
Getting this "transaction not valid" message everytime.
Quote
2014-08-13 15:16:04 CDarkSendPool::SendMoney() - Added transaction to pool.
2014-08-13 15:16:04 RelayDarkSendIn - found master, relaying message - 54.92.60.123:9999
2014-08-13 15:16:04 DoAutomaticDenominating : Running darksend denominate. Return ''
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 2
2014-08-13 15:16:05 DarkSendStatusUpdate - state: 2 entriesCount: 0 accepted: 0 error: transaction not valid
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 6
2014-08-13 15:16:05 darkSend Status => ERROR : transaction not valid
2014-08-13 15:16:06 Added 288 addresses from 54.92.60.123: 74 tried, 10336 new
2014-08-13 15:16:06 Added 287 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Added 170 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Flushing wallet.dat
2014-08-13 15:16:06 Flushed wallet.dat 12ms
2014-08-13 15:16:15 CDarkSendPool::Check() -- RESETTING MESSAGE
2014-08-13 15:16:15 darkSend Status => Idle
2014-08-13 15:16:04 RelayDarkSendIn - found master, relaying message - 54.92.60.123:9999
2014-08-13 15:16:04 DoAutomaticDenominating : Running darksend denominate. Return ''
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 2
2014-08-13 15:16:05 DarkSendStatusUpdate - state: 2 entriesCount: 0 accepted: 0 error: transaction not valid
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 6
2014-08-13 15:16:05 darkSend Status => ERROR : transaction not valid
2014-08-13 15:16:06 Added 288 addresses from 54.92.60.123: 74 tried, 10336 new
2014-08-13 15:16:06 Added 287 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Added 170 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Flushing wallet.dat
2014-08-13 15:16:06 Flushed wallet.dat 12ms
2014-08-13 15:16:15 CDarkSendPool::Check() -- RESETTING MESSAGE
2014-08-13 15:16:15 darkSend Status => Idle
What are you actually trying to do?
If the wallet is denominating then you need to WAIT until it is finished. It may take several hours depending on the number of coins you have and the number of rounds.
I was trying to upgrade from the stable version to the rc4 version and get the same debug messages as the quote above.
Same question to you.well i thought something was wrong reading those debug msgs (like 'transaction not valid and such'). Or is this normal ?
August 13, 2014, 10:40:49 AM
rc4 launch but... decepcion price darkcoin to the floor
darkcoin to the floorGrow up, not everything is a trade.
August 13, 2014, 10:39:33 AM
rc4 launch but... decepcion price darkcoin to the floor
darkcoin to the floor August 13, 2014, 10:37:04 AM
Getting this "transaction not valid" message everytime.
Quote
2014-08-13 15:16:04 CDarkSendPool::SendMoney() - Added transaction to pool.
2014-08-13 15:16:04 RelayDarkSendIn - found master, relaying message - 54.92.60.123:9999
2014-08-13 15:16:04 DoAutomaticDenominating : Running darksend denominate. Return ''
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 2
2014-08-13 15:16:05 DarkSendStatusUpdate - state: 2 entriesCount: 0 accepted: 0 error: transaction not valid
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 6
2014-08-13 15:16:05 darkSend Status => ERROR : transaction not valid
2014-08-13 15:16:06 Added 288 addresses from 54.92.60.123: 74 tried, 10336 new
2014-08-13 15:16:06 Added 287 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Added 170 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Flushing wallet.dat
2014-08-13 15:16:06 Flushed wallet.dat 12ms
2014-08-13 15:16:15 CDarkSendPool::Check() -- RESETTING MESSAGE
2014-08-13 15:16:15 darkSend Status => Idle
2014-08-13 15:16:04 RelayDarkSendIn - found master, relaying message - 54.92.60.123:9999
2014-08-13 15:16:04 DoAutomaticDenominating : Running darksend denominate. Return ''
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 2
2014-08-13 15:16:05 DarkSendStatusUpdate - state: 2 entriesCount: 0 accepted: 0 error: transaction not valid
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 6
2014-08-13 15:16:05 darkSend Status => ERROR : transaction not valid
2014-08-13 15:16:06 Added 288 addresses from 54.92.60.123: 74 tried, 10336 new
2014-08-13 15:16:06 Added 287 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Added 170 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Flushing wallet.dat
2014-08-13 15:16:06 Flushed wallet.dat 12ms
2014-08-13 15:16:15 CDarkSendPool::Check() -- RESETTING MESSAGE
2014-08-13 15:16:15 darkSend Status => Idle
What are you actually trying to do?
If the wallet is denominating then you need to WAIT until it is finished. It may take several hours depending on the number of coins you have and the number of rounds.
I was trying to upgrade from the stable version to the rc4 version and get the same debug messages as the quote above.
Same question to you. August 13, 2014, 10:34:38 AM
Getting this "transaction not valid" message everytime.
Quote
2014-08-13 15:16:04 CDarkSendPool::SendMoney() - Added transaction to pool.
2014-08-13 15:16:04 RelayDarkSendIn - found master, relaying message - 54.92.60.123:9999
2014-08-13 15:16:04 DoAutomaticDenominating : Running darksend denominate. Return ''
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 2
2014-08-13 15:16:05 DarkSendStatusUpdate - state: 2 entriesCount: 0 accepted: 0 error: transaction not valid
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 6
2014-08-13 15:16:05 darkSend Status => ERROR : transaction not valid
2014-08-13 15:16:06 Added 288 addresses from 54.92.60.123: 74 tried, 10336 new
2014-08-13 15:16:06 Added 287 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Added 170 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Flushing wallet.dat
2014-08-13 15:16:06 Flushed wallet.dat 12ms
2014-08-13 15:16:15 CDarkSendPool::Check() -- RESETTING MESSAGE
2014-08-13 15:16:15 darkSend Status => Idle
2014-08-13 15:16:04 RelayDarkSendIn - found master, relaying message - 54.92.60.123:9999
2014-08-13 15:16:04 DoAutomaticDenominating : Running darksend denominate. Return ''
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 2
2014-08-13 15:16:05 DarkSendStatusUpdate - state: 2 entriesCount: 0 accepted: 0 error: transaction not valid
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 6
2014-08-13 15:16:05 darkSend Status => ERROR : transaction not valid
2014-08-13 15:16:06 Added 288 addresses from 54.92.60.123: 74 tried, 10336 new
2014-08-13 15:16:06 Added 287 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Added 170 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Flushing wallet.dat
2014-08-13 15:16:06 Flushed wallet.dat 12ms
2014-08-13 15:16:15 CDarkSendPool::Check() -- RESETTING MESSAGE
2014-08-13 15:16:15 darkSend Status => Idle
I was trying to upgrade from the stable version to the rc4 version and get the same debug messages as the quote above.
August 13, 2014, 10:30:52 AM
RC4 Update - We are live!
https://darkcointalk.org/threads/rc4-launch.2033/
https://darkcointalk.org/threads/rc4-launch.2033/
WOW, I have just woke up for the great news! Congratulations eduffield, the Dev team and DRK community!
I hope everything goes smooth and wish success to us all!
August 13, 2014, 10:30:33 AM
Hi Dev Team.
The OP should be updated to clearly state the RC4 version to download. Should also clearly state that Windows version of RC4 wallet coming soon. And there should a couple of DRK ambassadors on the thread to help those that need assistance. Thoughts?
The OP should be updated to clearly state the RC4 version to download. Should also clearly state that Windows version of RC4 wallet coming soon. And there should a couple of DRK ambassadors on the thread to help those that need assistance. Thoughts?
Windows wallet is already out.
Direct Download: https://raw.githubusercontent.com/darkcoinproject/darkcoin-binaries/master/rc/darkcoin-0.10.12.25-win.zip
https://www.darkcoin.io/getstarted.html
August 13, 2014, 10:29:39 AM
Hi Dev Team.
The OP should be updated to clearly state the RC4 version to download. Should also clearly state that Windows version of RC4 wallet coming soon. And there should a couple of DRK ambassadors on the thread to help those that need assistance. Thoughts?
The OP should be updated to clearly state the RC4 version to download. Should also clearly state that Windows version of RC4 wallet coming soon. And there should a couple of DRK ambassadors on the thread to help those that need assistance. Thoughts?
August 13, 2014, 10:21:58 AM
Getting this "transaction not valid" message everytime.
Quote
2014-08-13 15:16:04 CDarkSendPool::SendMoney() - Added transaction to pool.
2014-08-13 15:16:04 RelayDarkSendIn - found master, relaying message - 54.92.60.123:9999
2014-08-13 15:16:04 DoAutomaticDenominating : Running darksend denominate. Return ''
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 2
2014-08-13 15:16:05 DarkSendStatusUpdate - state: 2 entriesCount: 0 accepted: 0 error: transaction not valid
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 6
2014-08-13 15:16:05 darkSend Status => ERROR : transaction not valid
2014-08-13 15:16:06 Added 288 addresses from 54.92.60.123: 74 tried, 10336 new
2014-08-13 15:16:06 Added 287 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Added 170 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Flushing wallet.dat
2014-08-13 15:16:06 Flushed wallet.dat 12ms
2014-08-13 15:16:15 CDarkSendPool::Check() -- RESETTING MESSAGE
2014-08-13 15:16:15 darkSend Status => Idle
2014-08-13 15:16:04 RelayDarkSendIn - found master, relaying message - 54.92.60.123:9999
2014-08-13 15:16:04 DoAutomaticDenominating : Running darksend denominate. Return ''
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 2
2014-08-13 15:16:05 DarkSendStatusUpdate - state: 2 entriesCount: 0 accepted: 0 error: transaction not valid
2014-08-13 15:16:05 CDarkSendPool::UpdateState() == 2 | 6
2014-08-13 15:16:05 darkSend Status => ERROR : transaction not valid
2014-08-13 15:16:06 Added 288 addresses from 54.92.60.123: 74 tried, 10336 new
2014-08-13 15:16:06 Added 287 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Added 170 addresses from 54.92.60.123: 74 tried, 10324 new
2014-08-13 15:16:06 Flushing wallet.dat
2014-08-13 15:16:06 Flushed wallet.dat 12ms
2014-08-13 15:16:15 CDarkSendPool::Check() -- RESETTING MESSAGE
2014-08-13 15:16:15 darkSend Status => Idle
Jump to: