Topic: [ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency - page 6438. (Read 9723858 times)
March 29, 2014, 10:22:51 PM
I'm noticing my cpu miners are not finding any accepted shares anymore (or very few) and I'm wondering if there is a way to adjust things for minerd that might give me better acceptance rates? I never see this talked about?
March 29, 2014, 10:18:26 PM
Dammit, one GPU went SICK. Dropped to I19 and 975 core, will see how that goes... the ones in this rig are XFXs which do not have a stellar rep but were dirt cheap. Other rigs are Sapphires, and Gigabyte Windforce jobbies, which will hopefully take a bit more abuse when I get around to it tomorrow.
You run 270's at I19? My 270x's run best at 13.
Well I am now as I20 killified one of them after 30 minutes.
Fingers crossed.What clocks are you running? Maybe I should drop the intensity and up the core/mem speeds? I'm new to X11, still experimenting.
1150 core and 1480 mem, get 1.36 Mh/s each @ I-13.
March 29, 2014, 10:09:29 PM
Some FUD agents ratted out to The Armory that it is closed source beta and they stopped accepting Darkcoin.
I think the competition is really heating up for anonymous coins. Lot of Anoncoin agents in the Alt section don't even mention Darkcoin in their statements to folks who are beginning to wonder about truly private coins and also Zerocash is being pushed down peoples throats.
I think the competition is really heating up for anonymous coins. Lot of Anoncoin agents in the Alt section don't even mention Darkcoin in their statements to folks who are beginning to wonder about truly private coins and also Zerocash is being pushed down peoples throats.
March 29, 2014, 10:05:25 PM
Dammit, one GPU went SICK. Dropped to I19 and 975 core, will see how that goes... the ones in this rig are XFXs which do not have a stellar rep but were dirt cheap. Other rigs are Sapphires, and Gigabyte Windforce jobbies, which will hopefully take a bit more abuse when I get around to it tomorrow.
You run 270's at I19? My 270x's run best at 13.
Well I am now as I20 killified one of them after 30 minutes.
Fingers crossed.What clocks are you running? Maybe I should drop the intensity and up the core/mem speeds? I'm new to X11, still experimenting.
March 29, 2014, 10:03:02 PM
Ah, yeah XFX is going to be a different story I'm afraid. A shame how cheaply those things are made..
The Gigabytes are so much better, 5C cooler and literally half the noise. Well worth the extra few £s. Mind you if I was building another rig I'd go with 750Tis or whatever the new Maxwells are when they arrive... 2MH(X11)/120W/£150... I hope, haha...
March 29, 2014, 10:00:21 PM
Eduffield
Can we get some guestimation dates and update on progress?
including clarification about what happend to V4 ?
Can we get some guestimation dates and update on progress?
including clarification about what happend to V4 ?
He just forgot it, LOL. he just skipped the number.
I know you're asking Eduffield, but thought I'd let you know what I know in case it takes him a while to answer
March 29, 2014, 09:57:15 PM
Dammit, one GPU went SICK. Dropped to I19 and 975 core, will see how that goes... the ones in this rig are XFXs which do not have a stellar rep but were dirt cheap. Other rigs are Sapphires, and Gigabyte Windforce jobbies, which will hopefully take a bit more abuse when I get around to it tomorrow.
You run 270's at I19? My 270x's run best at 13.
March 29, 2014, 09:52:53 PM
http://www.darkcoin.io/
fix your htaccess or whatever is causing the www. not to be valid and not redirected.
Youre indexed with www. in google
https://www.google.com/search?q=darkcoin+whitepaper&ie=UTF-8&sa=Search&channel=fe&client=browser-ubuntu&hl=en
fix your htaccess or whatever is causing the www. not to be valid and not redirected.
Youre indexed with www. in google
https://www.google.com/search?q=darkcoin+whitepaper&ie=UTF-8&sa=Search&channel=fe&client=browser-ubuntu&hl=en
triple dubs works for me
March 29, 2014, 09:41:07 PM
Ah, yeah XFX is going to be a different story I'm afraid. A shame how cheaply those things are made..
March 29, 2014, 09:40:40 PM
http://www.darkcoin.io/
fix your htaccess or whatever is causing the www. not to be valid and not redirected.
Youre indexed with www. in google
https://www.google.com/search?q=darkcoin+whitepaper&ie=UTF-8&sa=Search&channel=fe&client=browser-ubuntu&hl=en
fix your htaccess or whatever is causing the www. not to be valid and not redirected.
Youre indexed with www. in google
https://www.google.com/search?q=darkcoin+whitepaper&ie=UTF-8&sa=Search&channel=fe&client=browser-ubuntu&hl=en
March 29, 2014, 09:30:03 PM
Dammit, one GPU went SICK. Dropped to I19 and 975 core, will see how that goes... the ones in this rig are XFXs which do not have a stellar rep but were dirt cheap. Other rigs are Sapphires, and Gigabyte Windforce jobbies, which will hopefully take a bit more abuse when I get around to it tomorrow.
March 29, 2014, 08:55:08 PM
I have a couple 270s that run at about 1.37Mh. Just bump your clock speeds to ~1130 core / 1500 mem and you should be all set. You can also turn the fans down on them, they don't need to run at 2.8k rpm when your GPU is so cool .
.Thanks, getting 1.275MH/card with I20 and 1050/1450 clocks @ 49C. WU up to 0.080-0.084ish. Have also lowered fanspeed
Bit nervous of clocking up further, best I could do on scrypt-n was I18 and 975 core (1250 mem gave best hast weirdly) without HW errors creeping in. Will leave it overnight and see if it's still chugging happily in the morning.
Have another two 270 rigs currently mining vertcoin, but temps are getting a bit tropical in my garage/gym. This might be my summer coin.
Yeah it's definitely great for summer. If it makes you feel any better I mine 24/7 with my 270s @ 1130/1500 and I have zero issues with them, they take overclocking quite well. Not sure what brand you have though (MSI for me) and that could make a difference. Of course there's also driver/bios/undervolt/all that fun stuff if you really want to tweak it.
March 29, 2014, 08:47:43 PM
Looks like Nyancoin is going to adopt X11 w/POS.
Loads of coin's devs are talking about copying darkcoin's ideas, but darkcoin devs invented them. It just gives darkcoin more publicity.
March 29, 2014, 08:44:25 PM
Looks like Nyancoin is going to adopt X11 w/POS.
March 29, 2014, 08:41:08 PM
I have a couple 270s that run at about 1.37Mh. Just bump your clock speeds to ~1130 core / 1500 mem and you should be all set. You can also turn the fans down on them, they don't need to run at 2.8k rpm when your GPU is so cool .
.Thanks, getting 1.275MH/card with I20 and 1050/1450 clocks @ 49C. WU up to 0.080-0.084ish. Have also lowered fanspeed
Bit nervous of clocking up further, best I could do on scrypt-n was I18 and 975 core (1250 mem gave best hast weirdly) without HW errors creeping in. Will leave it overnight and see if it's still chugging happily in the morning.
Have another two 270 rigs currently mining vertcoin, but temps are getting a bit tropical in my garage/gym. This might be my summer coin.
March 29, 2014, 08:40:29 PM
So I have a question for the community here about X11 mining on Darkcoin:
I'm mining with two sapphire R9 290x Tri-X cards. I run SGminer 4.1.0 and use a .bat file to start it and CGwatcher to keep things going.
Usually I set my --gpu-threads value to "2,2" but recently I tried setting it as high as "10,10". When I do this then in SGminer I see my hashrate go up to about 3.5 to 3.7 MH/s per card (from my usual of 2.7). This is awesome, however I start getting boatloads of stale shares. On the dashboard on my pool (lotterymining or coinmine, either one) I see a super low hashrate of like 1.2 to 2.0 MH/s, when it should be up near 7.0 MH/s. Does anyone know why I start getting all these stale shares when I put the threads up?
I'm mining with two sapphire R9 290x Tri-X cards. I run SGminer 4.1.0 and use a .bat file to start it and CGwatcher to keep things going.
Usually I set my --gpu-threads value to "2,2" but recently I tried setting it as high as "10,10". When I do this then in SGminer I see my hashrate go up to about 3.5 to 3.7 MH/s per card (from my usual of 2.7). This is awesome, however I start getting boatloads of stale shares. On the dashboard on my pool (lotterymining or coinmine, either one) I see a super low hashrate of like 1.2 to 2.0 MH/s, when it should be up near 7.0 MH/s. Does anyone know why I start getting all these stale shares when I put the threads up?
March 29, 2014, 08:39:05 PM
Eduffield
Can we get some guestimation dates and update on progress?
including clarification about what happend to V4 ?
Can we get some guestimation dates and update on progress?
including clarification about what happend to V4 ?
March 29, 2014, 07:59:59 PM
you guys are being delusional cheerleaders and fanboys and trying to reason with any of you in the slightest is pretty much pointless.. your blind period.
and i have the experience from inspecting and watching coin after coin go down here and inspecting miners and coin source long before most of you got here,
kissing coin cloners ass's.. if i was wrong one of YOU would have "put up" putting me in my place but what has happened actually
is 3 of the negative points i made was confirmed by you guys after.. so i have already put up or i should say you guys have for me lol
You are acting like an arrogant, all knowing oracle, master of C++, cryptocurrency etc. trying to explain everyone else - who you deem as inferior, dumb, fan boys etc. - how all the altcoins are clones, scams etc.
If you are as good as you say you are, why not develop something or help others, rather than wasting your and others time on pointless discussion and false accusations?
Evan has done more in several months than you did since joining bitcointalk (and will ever do - my educated guess).
Either be constructive or pack your bags before getting any more annoying than you already are.
This guy is Anonymint v2.0.
"Hey my cryptocurrency which is coming out
Sadly for Anonymint v2.0, he lacks the grammar and technical knowledge of v1.0 .
March 29, 2014, 07:53:57 PM
I have a couple 270s that run at about 1.37Mh. Just bump your clock speeds to ~1130 core / 1500 mem and you should be all set. You can also turn the fans down on them, they don't need to run at 2.8k rpm when your GPU is so cool .
. March 29, 2014, 07:44:59 PM
OK, first off, the wallet compiled in Xubuntu 13.10 WITHOUT HOURS OF BUGGERING ABOUT FIXING STUFF, which is a first for me. Thank you Darkcoin devs!
Now does this look right for my 270 rig:
conf file:
Performance about right for 270s or could I extract more?
For scrypt/scrypt-n I usually specify core/mem speeds, haven't here, just stuck a pool in the example file that came with BAMT 1.6. (sgminer-sph)
Any help welcomed!
Now does this look right for my 270 rig:
conf file:
Code:
"auto-fan": true,
"gpu-fan": "80-100",
"temp-cutoff": "85",
"temp-overheat": "80",
"temp-target": "75",
"worksize": "256",
"intensity": "18",
"thread-concurrency": "6336",
"api-port": "4028",
"api-listen": true,
"api-allow": "W:127.0.0.1",
"failover-only" : true,
"no-pool-disable": true,
"no-submit-stale" : true,
"queue": "0",
"kernel" : "darkcoin",
"kernel-path": "/usr/local/bin"
Performance about right for 270s or could I extract more?
For scrypt/scrypt-n I usually specify core/mem speeds, haven't here, just stuck a pool in the example file that came with BAMT 1.6. (sgminer-sph)
Any help welcomed!
Jump to: