AMD miner? When is that coming? 
AMD miner is still not created, if one is not made by tomorrow user https://bitcointalksearch.org/user/djm34-215787 who made the nvidia miner will make one. So the rest of us amd miners can jump in
Topic: [ANN][Doomcoin](DOOM) ToR Anon/Luffa-512 Algo on *Bittrex/C-CEX* Merch Service! - page 24. (Read 49444 times)
July 28, 2014, 10:55:27 PM
AMD miner is still not created, if one is not made by tomorrow user https://bitcointalksearch.org/user/djm34-215787 who made the nvidia miner will make one. So the rest of us amd miners can jump in
July 28, 2014, 10:52:13 PM
i can't solo mine with ccminer. It says connection refuse.
July 28, 2014, 10:43:30 PM
Sounds good!
July 28, 2014, 10:41:06 PM
AMD miner? When is that coming?
July 28, 2014, 10:34:33 PM
here it is: https://mega.co.nz/#!oFdSBDoQ!6b7UZVYvPe2BXAagCAWlSEYKUK4-EMKsIJ0ODYZIsZs
It was compiled for compute_30;compute_35 and compute_50
It was compiled for compute_30;compute_35 and compute_50
Awesome! Cheers. Working great on my 760m gtx. Getting 15500, basicaly 10x what I was getting on my cpu. On hashharder
Please give command line .
July 28, 2014, 10:23:25 PM
ok, I have updated my github with doom kernel: https://github.com/djm34/ccminer
ccminer -a luffa (I recommend on pool to use -f 0.25 or -f 0.125, depending on pool difficulty, if the difficulty is too low, you will get many rejected share, so -f 0.25, and -f 0.125 multiply the difficulty by 4 or 8... I tested it on hashharder, may-be it will be different on suprnova...).
The windows binaries should follow soon. It is compiled with cuda 6.5 for compute 3.0, 3.5 and 5.0.
It requires absolutely the latest beta driver 340.something (it won't work otherwise and I won't compile with cuda 5.5 as it takes more than 2 hours...). From the github, it is set to compile with cuda 5.5
by the way before compiling, you need to remove "ccminer.rc" from visual otherwise it fails at the end... (I am not sure from where this is coming actually...)
ccminer -a luffa (I recommend on pool to use -f 0.25 or -f 0.125, depending on pool difficulty, if the difficulty is too low, you will get many rejected share, so -f 0.25, and -f 0.125 multiply the difficulty by 4 or 8... I tested it on hashharder, may-be it will be different on suprnova...).
The windows binaries should follow soon. It is compiled with cuda 6.5 for compute 3.0, 3.5 and 5.0.
It requires absolutely the latest beta driver 340.something (it won't work otherwise and I won't compile with cuda 5.5 as it takes more than 2 hours...). From the github, it is set to compile with cuda 5.5
by the way before compiling, you need to remove "ccminer.rc" from visual otherwise it fails at the end... (I am not sure from where this is coming actually...)
Commond line for mining ?
ccminer.exe -a luffa -o stratum+tcp -u -p 1234
This is the basic command line before pool info is entered.
Wallet could not sync please give nodes or upload peer.dat file .
Here are some nodes, this coin is ToR anonymous if you live in china or japan your internet provider blocks this network and you will need to use a VPN to connect(info posted in the OP)
Code:
addnode=t2tfssfrq6b776py.onion
addnode=vhubvebadrdf65ry.onion
addnode=neuhiedv3fbgfitb.onion
addnode=pwdnoink5g2tdjrr.onion
addnode=iyc6jzyo7utnv5cd.onion
addnode=6wrayjttun6b3pb5.onion
addnode=gkerttb4reqdr3ys.onion
addnode=ds6je3qagznbo7br.onion
July 28, 2014, 10:21:30 PM
ok, I have updated my github with doom kernel: https://github.com/djm34/ccminer
ccminer -a luffa (I recommend on pool to use -f 0.25 or -f 0.125, depending on pool difficulty, if the difficulty is too low, you will get many rejected share, so -f 0.25, and -f 0.125 multiply the difficulty by 4 or 8... I tested it on hashharder, may-be it will be different on suprnova...).
The windows binaries should follow soon. It is compiled with cuda 6.5 for compute 3.0, 3.5 and 5.0.
It requires absolutely the latest beta driver 340.something (it won't work otherwise and I won't compile with cuda 5.5 as it takes more than 2 hours...). From the github, it is set to compile with cuda 5.5
by the way before compiling, you need to remove "ccminer.rc" from visual otherwise it fails at the end... (I am not sure from where this is coming actually...)
ccminer -a luffa (I recommend on pool to use -f 0.25 or -f 0.125, depending on pool difficulty, if the difficulty is too low, you will get many rejected share, so -f 0.25, and -f 0.125 multiply the difficulty by 4 or 8... I tested it on hashharder, may-be it will be different on suprnova...).
The windows binaries should follow soon. It is compiled with cuda 6.5 for compute 3.0, 3.5 and 5.0.
It requires absolutely the latest beta driver 340.something (it won't work otherwise and I won't compile with cuda 5.5 as it takes more than 2 hours...). From the github, it is set to compile with cuda 5.5
by the way before compiling, you need to remove "ccminer.rc" from visual otherwise it fails at the end... (I am not sure from where this is coming actually...)
Commond line for mining ?
ccminer.exe -a luffa -o stratum+tcp -u -p 1234
This is the basic command line before pool info is entered.
Luffa miner works with this code but ccminer doesn't .
July 28, 2014, 10:17:54 PM
ok, I have updated my github with doom kernel: https://github.com/djm34/ccminer
ccminer -a luffa (I recommend on pool to use -f 0.25 or -f 0.125, depending on pool difficulty, if the difficulty is too low, you will get many rejected share, so -f 0.25, and -f 0.125 multiply the difficulty by 4 or 8... I tested it on hashharder, may-be it will be different on suprnova...).
The windows binaries should follow soon. It is compiled with cuda 6.5 for compute 3.0, 3.5 and 5.0.
It requires absolutely the latest beta driver 340.something (it won't work otherwise and I won't compile with cuda 5.5 as it takes more than 2 hours...). From the github, it is set to compile with cuda 5.5
by the way before compiling, you need to remove "ccminer.rc" from visual otherwise it fails at the end... (I am not sure from where this is coming actually...)
ccminer -a luffa (I recommend on pool to use -f 0.25 or -f 0.125, depending on pool difficulty, if the difficulty is too low, you will get many rejected share, so -f 0.25, and -f 0.125 multiply the difficulty by 4 or 8... I tested it on hashharder, may-be it will be different on suprnova...).
The windows binaries should follow soon. It is compiled with cuda 6.5 for compute 3.0, 3.5 and 5.0.
It requires absolutely the latest beta driver 340.something (it won't work otherwise and I won't compile with cuda 5.5 as it takes more than 2 hours...). From the github, it is set to compile with cuda 5.5
by the way before compiling, you need to remove "ccminer.rc" from visual otherwise it fails at the end... (I am not sure from where this is coming actually...)
Commond line for mining ?
ccminer.exe -a luffa -o stratum+tcp -u -p 1234
This is the basic command line before pool info is entered.
Wallet could not sync please give nodes or upload peer.dat file .
July 28, 2014, 10:09:18 PM
ok, I have updated my github with doom kernel: https://github.com/djm34/ccminer
ccminer -a luffa (I recommend on pool to use -f 0.25 or -f 0.125, depending on pool difficulty, if the difficulty is too low, you will get many rejected share, so -f 0.25, and -f 0.125 multiply the difficulty by 4 or 8... I tested it on hashharder, may-be it will be different on suprnova...).
The windows binaries should follow soon. It is compiled with cuda 6.5 for compute 3.0, 3.5 and 5.0.
It requires absolutely the latest beta driver 340.something (it won't work otherwise and I won't compile with cuda 5.5 as it takes more than 2 hours...). From the github, it is set to compile with cuda 5.5
by the way before compiling, you need to remove "ccminer.rc" from visual otherwise it fails at the end... (I am not sure from where this is coming actually...)
ccminer -a luffa (I recommend on pool to use -f 0.25 or -f 0.125, depending on pool difficulty, if the difficulty is too low, you will get many rejected share, so -f 0.25, and -f 0.125 multiply the difficulty by 4 or 8... I tested it on hashharder, may-be it will be different on suprnova...).
The windows binaries should follow soon. It is compiled with cuda 6.5 for compute 3.0, 3.5 and 5.0.
It requires absolutely the latest beta driver 340.something (it won't work otherwise and I won't compile with cuda 5.5 as it takes more than 2 hours...). From the github, it is set to compile with cuda 5.5
by the way before compiling, you need to remove "ccminer.rc" from visual otherwise it fails at the end... (I am not sure from where this is coming actually...)
Commond line for mining ?
ccminer.exe -a luffa -o stratum+tcp -u -p 1234
This is the basic command line before pool info is entered.
July 28, 2014, 10:07:49 PM
Sorry guys, but better late than never :-)
Doom Pool for you:
https://doom.suprnova.cc
This is a Suprnova NG Pool, you can use your unified login there and all your pool workers from earlier setups too.
SSO Single-Sign-On on this Pool - You can also use your previously set up workers !
Payouts every 30 seconds
DDoS protected
Suprnova Quality, lots of experience in all kind of hashes - we had the first X13 Stratum and were among the first X11 and NIST5 Pools !
Highly optimized Stratums and MPOS implementations.
Idle Worker Notifications
Two Factor Authentication if wanted
Support 24x7 via IRC,Mail,PM etc.
Only 1 % fee ! (thats 50% lower than most other Pools !)
We have full SSL encryption on all pools ! (https:// instead of http:// !!)
From miners to miners - we're mining ourselves on the pool, with our own, self built rigs !
A OP that actually knows what he's doing - in crypto and mining since 2011 !
We are on the bright side ! ;-)
We are running our own, legit Block Explorers for the coins we host ! Stay safe !
Doom Pool for you:
https://doom.suprnova.cc
This is a Suprnova NG Pool, you can use your unified login there and all your pool workers from earlier setups too.
SSO Single-Sign-On on this Pool - You can also use your previously set up workers !
Payouts every 30 seconds
DDoS protected
Suprnova Quality, lots of experience in all kind of hashes - we had the first X13 Stratum and were among the first X11 and NIST5 Pools !
Highly optimized Stratums and MPOS implementations.
Idle Worker Notifications
Two Factor Authentication if wanted
Support 24x7 via IRC,Mail,PM etc.
Only 1 % fee ! (thats 50% lower than most other Pools !)
We have full SSL encryption on all pools ! (https:// instead of http:// !!)
From miners to miners - we're mining ourselves on the pool, with our own, self built rigs !
A OP that actually knows what he's doing - in crypto and mining since 2011 !
We are on the bright side ! ;-)
We are running our own, legit Block Explorers for the coins we host ! Stay safe !
Added to the OP, appreciate it OCminer
If possible a trusted Bitcointalk member could review Doomcoins source so we have a third party evaluation to ease the fear that other teams have caused lately it would be very good!
Paying 100 DOOM bounty for this.
Sure I will, I'll add a Block Explorer soon, but i need some time to get the block explorer onto the new algo
Ok OC please pm us your DOOM address after you complete it. If you create a BE for our coin and verify nothing evil to our community(besides the Doom demons haha) The bounty is larger and you will be taken care of, great stuff keep the Daemons posted
edit: We should have some good news from djm shortly for you cudaminers, hoping he will post for everyone though.
OCminer, which port for your doomcoin pool? I couldn't find it in your get started.
ah sorry, i've fixed the getting started, its port 5111
July 28, 2014, 10:04:36 PM
ok, I have updated my github with doom kernel: https://github.com/djm34/ccminer
ccminer -a luffa (I recommend on pool to use -f 0.25 or -f 0.125, depending on pool difficulty, if the difficulty is too low, you will get many rejected share, so -f 0.25, and -f 0.125 multiply the difficulty by 4 or 8... I tested it on hashharder, may-be it will be different on suprnova...).
The windows binaries should follow soon. It is compiled with cuda 6.5 for compute 3.0, 3.5 and 5.0.
It requires absolutely the latest beta driver 340.something (it won't work otherwise and I won't compile with cuda 5.5 as it takes more than 2 hours...). From the github, it is set to compile with cuda 5.5
by the way before compiling, you need to remove "ccminer.rc" from visual otherwise it fails at the end... (I am not sure from where this is coming actually...)
ccminer -a luffa (I recommend on pool to use -f 0.25 or -f 0.125, depending on pool difficulty, if the difficulty is too low, you will get many rejected share, so -f 0.25, and -f 0.125 multiply the difficulty by 4 or 8... I tested it on hashharder, may-be it will be different on suprnova...).
The windows binaries should follow soon. It is compiled with cuda 6.5 for compute 3.0, 3.5 and 5.0.
It requires absolutely the latest beta driver 340.something (it won't work otherwise and I won't compile with cuda 5.5 as it takes more than 2 hours...). From the github, it is set to compile with cuda 5.5
by the way before compiling, you need to remove "ccminer.rc" from visual otherwise it fails at the end... (I am not sure from where this is coming actually...)
Commond line for mining ?
July 28, 2014, 10:01:28 PM
CMD line for mining ?
July 28, 2014, 09:58:46 PM
here it is: https://mega.co.nz/#!oFdSBDoQ!6b7UZVYvPe2BXAagCAWlSEYKUK4-EMKsIJ0ODYZIsZs
It was compiled for compute_30;compute_35 and compute_50
It was compiled for compute_30;compute_35 and compute_50
Awesome! Cheers. Working great on my 760m gtx. Getting 15500, basicaly 10x what I was getting on my cpu. On hashharder
July 28, 2014, 09:55:05 PM
here it is: https://mega.co.nz/#!oFdSBDoQ!6b7UZVYvPe2BXAagCAWlSEYKUK4-EMKsIJ0ODYZIsZs
It was compiled for compute_30;compute_35 and compute_50
It was compiled for compute_30;compute_35 and compute_50
Thank you for helping the Doomcoin community, awesome work today, added the ccminer link to the OP.
July 28, 2014, 09:51:47 PM
Sorry guys, but better late than never :-)
Doom Pool for you:
https://doom.suprnova.cc
This is a Suprnova NG Pool, you can use your unified login there and all your pool workers from earlier setups too.
SSO Single-Sign-On on this Pool - You can also use your previously set up workers !
Payouts every 30 seconds
DDoS protected
Suprnova Quality, lots of experience in all kind of hashes - we had the first X13 Stratum and were among the first X11 and NIST5 Pools !
Highly optimized Stratums and MPOS implementations.
Idle Worker Notifications
Two Factor Authentication if wanted
Support 24x7 via IRC,Mail,PM etc.
Only 1 % fee ! (thats 50% lower than most other Pools !)
We have full SSL encryption on all pools ! (https:// instead of http:// !!)
From miners to miners - we're mining ourselves on the pool, with our own, self built rigs !
A OP that actually knows what he's doing - in crypto and mining since 2011 !
We are on the bright side ! ;-)
We are running our own, legit Block Explorers for the coins we host ! Stay safe !
Doom Pool for you:
https://doom.suprnova.cc
This is a Suprnova NG Pool, you can use your unified login there and all your pool workers from earlier setups too.
SSO Single-Sign-On on this Pool - You can also use your previously set up workers !
Payouts every 30 seconds
DDoS protected
Suprnova Quality, lots of experience in all kind of hashes - we had the first X13 Stratum and were among the first X11 and NIST5 Pools !
Highly optimized Stratums and MPOS implementations.
Idle Worker Notifications
Two Factor Authentication if wanted
Support 24x7 via IRC,Mail,PM etc.
Only 1 % fee ! (thats 50% lower than most other Pools !)
We have full SSL encryption on all pools ! (https:// instead of http:// !!)
From miners to miners - we're mining ourselves on the pool, with our own, self built rigs !
A OP that actually knows what he's doing - in crypto and mining since 2011 !
We are on the bright side ! ;-)
We are running our own, legit Block Explorers for the coins we host ! Stay safe !
Added to the OP, appreciate it OCminer
If possible a trusted Bitcointalk member could review Doomcoins source so we have a third party evaluation to ease the fear that other teams have caused lately it would be very good!
Paying 100 DOOM bounty for this.
Sure I will, I'll add a Block Explorer soon, but i need some time to get the block explorer onto the new algo
Ok OC please pm us your DOOM address after you complete it. If you create a BE for our coin and verify nothing evil to our community(besides the Doom demons haha) The bounty is larger and you will be taken care of, great stuff keep the Daemons posted
edit: We should have some good news from djm shortly for you cudaminers, hoping he will post for everyone though.
OCminer, which port for your doomcoin pool? I couldn't find it in your get started.
July 28, 2014, 09:45:18 PM
There are just two pools in the dev's thread, and,their hash sum < 150M, where is the 850M hash? Yes,in the dev,they are laughing now by them alone. 
July 28, 2014, 09:43:25 PM
Shit!NET 1GH/S?THE DEV still don't release the GPU-Miner,play by themself 
1G/H isn't much a 780ti does 110MHash/s July 28, 2014, 09:38:54 PM
here it is: https://mega.co.nz/#!oFdSBDoQ!6b7UZVYvPe2BXAagCAWlSEYKUK4-EMKsIJ0ODYZIsZs
It was compiled for compute_30;compute_35 and compute_50
It was compiled for compute_30;compute_35 and compute_50
July 28, 2014, 09:38:46 PM
Shit!NET 1GH/S?THE DEV still don't release the GPU-Miner,play by themself
July 28, 2014, 09:37:01 PM
ok, I have updated my github with doom kernel: https://github.com/djm34/ccminer
ccminer -a luffa (I recommend on pool to use -f 0.25 or -f 0.125, depending on pool difficulty, if the difficulty is too low, you will get many rejected share, so -f 0.25, and -f 0.125 multiply the difficulty by 4 or 8... I tested it on hashharder, may-be it will be different on suprnova...).
The windows binaries should follow soon. It is compiled with cuda 6.5 for compute 3.0, 3.5 and 5.0.
It requires absolutely the latest beta driver 340.something (it won't work otherwise and I won't compile with cuda 5.5 as it takes more than 2 hours...). From the github, it is set to compile with cuda 5.5
by the way before compiling, you need to remove "ccminer.rc" from visual otherwise it fails at the end... (I am not sure from where this is coming actually...)
ccminer -a luffa (I recommend on pool to use -f 0.25 or -f 0.125, depending on pool difficulty, if the difficulty is too low, you will get many rejected share, so -f 0.25, and -f 0.125 multiply the difficulty by 4 or 8... I tested it on hashharder, may-be it will be different on suprnova...).
The windows binaries should follow soon. It is compiled with cuda 6.5 for compute 3.0, 3.5 and 5.0.
It requires absolutely the latest beta driver 340.something (it won't work otherwise and I won't compile with cuda 5.5 as it takes more than 2 hours...). From the github, it is set to compile with cuda 5.5
by the way before compiling, you need to remove "ccminer.rc" from visual otherwise it fails at the end... (I am not sure from where this is coming actually...)
You're the man, djm34. Waiting for your compiled binary. Already upgraded the driver to 340.46.
Jump to: