Topic: [ANN][ENT] Eternity - X11 - No Premine - page 41. (Read 83947 times)
I think its similar to Chain Coin.. What makes it worth when compared to Chain coin ?
Guys lets get serious, where is the dev? This should be our first concern before asking all those questions about masternodes. Does ANYONE have more information on this topic?
is there any other way to check if the MN is working ?
because after 1 day no payment at all
if i check the network traffic i see 50 mb received and send
so you should say its working
because after 1 day no payment at all
if i check the network traffic i see 50 mb received and send
so you should say its working
on your VPS execute ./eternity-cli eternitynode status
and you should see output as:
"status" : "Eternitynode successfully started"
if you see that, its working and maybe it takes a bit longer now for first reward to come
you can join the slack and get assistance there, here is the invite:
https://join.slack.com/t/eternitycoin/shared_invite/MjEzNTgxMjUwNzI1LTE1MDAyMDA3MzEtZTQ3NGQyN2RkZQ
im on windows
"overall" : "Successfully started 1 eternitynodes, failed to start 0, total 1",
"detail" : {
"status" : {
"alias" : "Smoke",
"result" : "successful"
How many Eternity coins required to create master node ?
1000 ENT for a Masternode
ENT should be 1usd by now coin supply low and tech is good
How many Eternity coins required to create master node ?
is there any other way to check if the MN is working ?
because after 1 day no payment at all
if i check the network traffic i see 50 mb received and send
so you should say its working
because after 1 day no payment at all
if i check the network traffic i see 50 mb received and send
so you should say its working
on your VPS execute ./eternity-cli eternitynode status
and you should see output as:
"status" : "Eternitynode successfully started"
if you see that, its working and maybe it takes a bit longer now for first reward to come
you can join the slack and get assistance there, here is the invite:
https://join.slack.com/t/eternitycoin/shared_invite/MjEzNTgxMjUwNzI1LTE1MDAyMDA3MzEtZTQ3NGQyN2RkZQ
is there any other way to check if the MN is working ?
because after 1 day no payment at all
if i check the network traffic i see 50 mb received and send
so you should say its working
because after 1 day no payment at all
if i check the network traffic i see 50 mb received and send
so you should say its working
any guide/script for masternode setup on vps maybe mutliple nodes with ipv6?
btw link on op to website shows 404 page not found error:
http://ent.eternity-group.org/en/
not very trustworthy for new people
its the wrong page, try: http://ent.eternity-group.org/
(just remove "/en" at the end)
any guide/script for masternode setup on vps maybe mutliple nodes with ipv6?
btw link on op to website shows 404 page not found error:
http://ent.eternity-group.org/en/
not very trustworthy for new people
I tried to make a IPv6 multiple installation with the help of mersmsxn (sorry, I know I always write horribly wrong your nick
) but there is something inherently wrong with the wallet which avoid us of getting it.Salute
I had success with the following conf settings (relevant parts bolded):
Quote
rpcuser=eternityrpc
rpcpassword=x
listen = 1
rpcport = (something)
daemon = 1
server = 1
gen = 0
discover = 1
eternitynode = 1
externalip = [ipv6]:4855
eternitynodeaddr = [ipv6]:4855
bind = 127.0.0.x
bind = [ipv6]
eternitynodeprivkey = xxx
rpcpassword=x
listen = 1
rpcport = (something)
daemon = 1
server = 1
gen = 0
discover = 1
eternitynode = 1
externalip = [ipv6]:4855
eternitynodeaddr = [ipv6]:4855
bind = 127.0.0.x
bind = [ipv6]
eternitynodeprivkey = xxx
bind should be the ipv6 address AND a loopback (127.0.0.1-255, different for each instance). This means you can have no more than 255 instances running on a single server, though I doubt that will be a problem. Also each node should have a different rpcport just in case. Each instance should also run on a separate user account.
The local conf file should include [ipv6]:4855 as the bind address.
If that doesn't work, check to make sure that the ipv6 addresses are actually bound (ifconfig). Many hosts offer ipv6 but activate it only by manual request.
standard windows wallet setup for masternode please ?
also is there a masternode pro page to monitor?
thanks
also is there a masternode pro page to monitor?
thanks
here is masternode monitor page:
http://ent.eternity-group.org/
join the slack, there is a manual and you'll get help there
https://join.slack.com/t/eternitycoin/shared_invite/MjEzNTgxMjUwNzI1LTE1MDAyMDA3MzEtZTQ3NGQyN2RkZQ
standard windows wallet setup for masternode please ?
also is there a masternode pro page to monitor?
thanks
also is there a masternode pro page to monitor?
thanks
wow, coin is going up
yes, it is:
Slack group Invitation
Join my Slack team! https://join.slack.com/t/eternitycoin/shared_invite/MjEzNTgxMjUwNzI1LTE1MDAyMDA3MzEtZTQ3NGQyN2RkZQ
Slack group Invitation
Join my Slack team! https://join.slack.com/t/eternitycoin/shared_invite/MjEzNTgxMjUwNzI1LTE1MDAyMDA3MzEtZTQ3NGQyN2RkZQ
Hi, just picked up the 1k for the node. Is there a slack group?
Thanks
Thanks
Do you know what are the masternode rewards right now also I have concerns whether the dev have has abandoned this project?
I believe it's roughly 9 coins per day.
Check the nodes section below.
http://ent.eternity-group.org/
With 10% going back to development you would think they are making some money now. You are right though that there has been 0 activity since release.
Okay thanks I guess I will just run the MN anyways since it's cheap and who knows this project might pick up some pace in the future if the dev decides to give it some time or the project get's taken over by new devs. Also this is crypto and it might pump for no reason at all who knows
Do you know what are the masternode rewards right now also I have concerns whether the dev have has abandoned this project?
I believe it's roughly 9 coins per day.
Check the nodes section below.
http://ent.eternity-group.org/
With 10% going back to development you would think they are making some money now. You are right though that there has been 0 activity since release.
Guide to put a remote EN in a VPS server like Vultr or VPS.ag in Ubuntu 16.04 x64
I know that put this in root should be avoided, but don't have time to make users and so on for all the nodes I have.
After looging for the first time in the VPS follow this instructions. VPS is refered to the remote wallet. Controller wallet is the one with your ENT in your computer. If yo have installed masternodes of other coins, this is quite similar, but wording is always eternitynode.
Change default pass for security:
Some simple firewall rules to improve security a bit:
Install the repo:
Wallet first start to create folders and files:
After the error message we create our eternity.conf file:
Write in it and save:
In the controller wallet, open console and:
Send the collateral (exactly 1000 ENT in one trasaction) to the address generated before.
Back in the VPS:
Put your private_key obtained with enternitynode genkey before in the place XXXX and save.
Then:
In the wallet:
We open eternitynode.conf in our controller wallet and put a new line as:
Close and reopen controller wallet
In VPS, check the wallet is already synced:
Check node creation transaction has already at least 16 confirmations. In the console:
Message : eternitynode succesfully started blablablablabla...
Back in the VPS:
"status" : "Eternitynode successfully started"
And done. My nodes have the bad habit to fall down every 10-15 days, take a look sometimes to their status with:
Donation address (give me a bit of your returns, I'm a poor man ) : EenLewAUJNYR2EWVd4qRCyq7vrzysLkpRb
Salute, and any correction will be appreciated.
I know that put this in root should be avoided, but don't have time to make users and so on for all the nodes I have.
After looging for the first time in the VPS follow this instructions. VPS is refered to the remote wallet. Controller wallet is the one with your ENT in your computer. If yo have installed masternodes of other coins, this is quite similar, but wording is always eternitynode.
Change default pass for security:
Quote
passwd root
Some simple firewall rules to improve security a bit:
Quote
ufw default deny
ufw logging on
ufw allow 22/tcp
ufw allow 4854/tcp
ufw allow 4855/tcp
ufw limit OpenSSH
ufw --force enable
ufw logging on
ufw allow 22/tcp
ufw allow 4854/tcp
ufw allow 4855/tcp
ufw limit OpenSSH
ufw --force enable
Install the repo:
Quote
wget https://github.com/eternity-group/eternity/releases/download/v0.12.0.61/eternity-0.12.0-linux64.tar.gz
tar -xzvf eternity-0.12.0-linux64.tar.gz
cd eternity-0.12.0/bin
tar -xzvf eternity-0.12.0-linux64.tar.gz
cd eternity-0.12.0/bin
Wallet first start to create folders and files:
Quote
./eternityd
After the error message we create our eternity.conf file:
Quote
cd
cd .eternity/
nano eternity.conf
cd .eternity/
nano eternity.conf
Write in it and save:
Quote
rpcuser=long random username
rpcpassword=longer random password
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
logtimestamps=1
maxconnections=256
eternitynode=1
eternitynodeprivkey=XXXX
addnode=176.65.120.174
addnode=176.65.120.5
addnode=2.95.220.18
addnode=46.119.117.105
addnode=5.19.241.85
rpcpassword=longer random password
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
logtimestamps=1
maxconnections=256
eternitynode=1
eternitynodeprivkey=XXXX
addnode=176.65.120.174
addnode=176.65.120.5
addnode=2.95.220.18
addnode=46.119.117.105
addnode=5.19.241.85
In the controller wallet, open console and:
Quote
eternitynode genkey
You get the EN private_keyQuote
getaccountaddress
Associated address to the EN.Send the collateral (exactly 1000 ENT in one trasaction) to the address generated before.
Back in the VPS:
Quote
cd
cd .eternity/
nano eternity.conf
cd .eternity/
nano eternity.conf
Put your private_key obtained with enternitynode genkey before in the place XXXX and save.
Then:
Quote
cd
cd eternity-0.12.0/bin
./eternityd
cd eternity-0.12.0/bin
./eternityd
In the wallet:
Quote
eternitynode getoutputs
We get the collateral TX_ID and TX_INDEX(0 or 1) (85898ae7956757657ced9689687687a 1 for example)We open eternitynode.conf in our controller wallet and put a new line as:
Quote
Node-alias VPS_IP:4855 Private_key TX_ID TX_INDEX
Save the fileClose and reopen controller wallet
In VPS, check the wallet is already synced:
Quote
./eternity-cli getinfo
And take a look at block number to be sure EN is synced.Check node creation transaction has already at least 16 confirmations. In the console:
Quote
Eternitynode start-alias
Message : eternitynode
Back in the VPS:
Quote
./eternity-cli eternitynode status
"status" : "Eternitynode successfully started"
And done. My nodes have the bad habit to fall down every 10-15 days, take a look sometimes to their status with:
Quote
eternitynode list-conf
Donation address (give me a bit of your returns, I'm a poor man
) : EenLewAUJNYR2EWVd4qRCyq7vrzysLkpRbSalute, and any correction will be appreciated.
Thanks for the guide, I've just added a masternode
Also for those who need it more visually I found a video on youtube: https://www.youtube.com/watch?v=yaeZ-qKgK7I&feature=youtu.be
Do you know what are the masternode rewards right now also I have concerns whether the dev have has abandoned this project?
The exact details of the bounty haven't come out yet Can I participate in this new account?
Sure, join the slack and get help there, the invitation link is in previous message
The exact details of the bounty haven't come out yet Can I participate in this new account?
Jump to: