{
"pools" : [
{
"url" :"stratum+tcp://erebor.dwarfpool.com:3345",
"user" : "unknown",
"pass" : "workerpassword"
}
]
,
"intensity" : "20,20,20,20",
"worksize" : "256",
"kernel" : "groestlcoin",
"lookup-gap" : "0",
"thread-concurrency" : "30592,20481,8192,8192",
"gpu-engine" : "947,975,1100,1100",
"gpu-memclock" : "1250,1500,1465,1465",
"expiry" : "5",
"failover-only" : true,
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"device" : "0-3",
"no-submit-stale" : true,
"gpu-threads" : "1"
}
is this setting okay? there is no thread-concurrency on 290. I just use above tc. is that okay?
Topic: [ANN][GRS] Groestlcoin | 1st to activate Segwit | Building Lightning Network - page 214. (Read 558212 times)
April 27, 2014, 12:24:12 AM
April 27, 2014, 12:19:46 AM
I have 2 x 290 and 2 x 270x. what is a good conf for this coin?
https://docs.google.com/spreadsheets/d/1hTOUdJZrKqrNDXTIbXgNvJtj_fnpECREcs-eHxaGrZc/edit?usp=sharing
April 26, 2014, 11:43:42 PM
I have 2 x 290 and 2 x 270x. what is a good conf for this coin?
April 26, 2014, 10:42:23 PM
Hi all!
I added a FAQ section to groestcoin.org yesterday with the questions regarding no accepts/rejects.
Also see a few pages back regarding a solution to the same problem.
Look at the bottom of first post in sph-sgminer thread: https://bitcointalksearch.org/topic/ann-sph-sgminer-multi-coin-multi-algorithm-gpu-miner-added-marucoin-475795.
Basically, without that option, your difficulty is 256 times larger than necessary.
Thanks
I added a FAQ section to groestcoin.org yesterday with the questions regarding no accepts/rejects.
Also see a few pages back regarding a solution to the same problem.
Look at the bottom of first post in sph-sgminer thread: https://bitcointalksearch.org/topic/ann-sph-sgminer-multi-coin-multi-algorithm-gpu-miner-added-marucoin-475795.
Quote
Important! A new option was added: --difficulty-multiplier. It allows to set stratum difficulty multiplier. For QubitCoin, Quark and Animecoin it will be usually 256. For Groestlcoin, Fuguecoin and Twecoin it will be usually 0.0039062500 (1/256). Default value is 1.0. If you have "share above target" errors then set it to 256. If difficulty required by pool is strangely large, set it to 0.0039062500 (1/256). Other values are unlikely to be used. Hopefully this will fix all remaining stratum problems.
Basically, without that option, your difficulty is 256 times larger than necessary.
Thanks
April 26, 2014, 07:58:38 PM
My GPUs are not at screaming fan speeds now mining this algo, getting around 32Mh/s with 2x 290x and 2x 7970L.
Est next diff. 36,166.7606, I know it changes each block but that is a huge diff change from 108.226.
Est next diff. 36,166.7606, I know it changes each block but that is a huge diff change from 108.226.
April 26, 2014, 07:49:07 PM
Hey guys, I am running 2 Nvidia 770 gtxs using this bat file. The pool dashboard isn't registering that my miners are working, but the both GPU threads are running. No accepts/declines/Yay.
Any advice to solve this would be greatly appreciated. TY in advance.
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ccminer.exe -t 2 -a groestl -o stratum+tcp://cryptohunger.com:3333 -u username.workername -p password
Any advice to solve this would be greatly appreciated. TY in advance.
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ccminer.exe -t 2 -a groestl -o stratum+tcp://cryptohunger.com:3333 -u username.workername -p password
hmm… perhaps cryptohunger is having an issue atm?
could u try a differnt pool pls?
give grs.suprnova.cc or coinmine.pl/grs a try
thx
I couldnt even connect to coinmine.pl . Thats why i switched over. Having the miner actually connect and run is the best its been for GRS so far. I wonder how long the delay is on the site dashboard before it shows my productivity... i would assume around 1 or so rounds.
OK coinmine has got little hashrate, maybe adding confusion here - try grs.suprnova.cc (still must wait ~10 mins for first dashboard activity)
p.s. u did create ur own account on coinmine , then create a worker name and password right, and enetr that into ur command : ccminer.exe -t 2 -a groestl -o stratum+tcp://cryptohunger.com:3333 -u username.workername -p password ?
yes yes i do create accounts and workers for each site/pool. Unfortunately I find it funny to give them names that may be considered rude... or racist... so i just wanted to refrain from putting those miner names out there. LoL .. I am now on Suprnova 5 minutes in. I think I am going to try and redownload CCminer and make sure its the most relevant version.
April 26, 2014, 07:42:52 PM
I have several wallets on the machine, and only this one looks like this. I normally use sandbox for the wallets, just in case.
Sandbox always runs out of mem when i try to run a wallet in it. How do you get around that?
Quote
Dev is horizontally challenged atm
ROTFLMFAO!
Did you see my post above about that fix not helping?
Indeed I did…
Hmmm Still the same.
Batch file
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
"C:\Coins and pools\GroestlCoin\Gpu-DwarfPool-grs\sgminer\sgminer.exe" --config "C:\Coins and pools\GroestlCoin\Gpu-DwarfPool-grs\sgminer\Cgminer.conf"
I even added scrypt=false to config just to be sure.
Batch file
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
"C:\Coins and pools\GroestlCoin\Gpu-DwarfPool-grs\sgminer\sgminer.exe" --config "C:\Coins and pools\GroestlCoin\Gpu-DwarfPool-grs\sgminer\Cgminer.conf"
I even added scrypt=false to config just to be sure.
and was wondering if ur using the correct miner
u should b e using SPH-Sgminer 4.1 for AMD GPUs (Windows binary) available here: http://www.groestlcoin.org/pools/
also:
-k groestlcoin
or
kernel = groestlcoin
may be required
PS… scrypt=false - now im laughing my ass off too
OK, It was the Sgminer I got from the SGminer page that did me in.
https://bitcointalksearch.org/topic/ann-sph-sgminer-multi-coin-multi-algorithm-gpu-miner-added-marucoin-475795 I used the latest version Version 4.2.0
Quote
Windows binaries (compiled by badman74):
Builds are sorted from newest to oldest:
https://mega.co.nz/#!uAp12DYa!vhfp1wDb43mB1KCo_5ZfwXehYhBXeKcVYWbmkTB2ldg (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS + SIC + TWE + MARU)
https://mega.co.nz/#!eZhiCZbA!BDE1xMfi_6iE-PVzXxda5KtAmMbBY5tMGwXKm-sIgKY (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS + SIC + TWE)
https://mega.co.nz/#!jMx1wSQZ!FQVD-ADPhiz8Eep9yQig8_WyP43oO6dC0I5z3_Gr93Y (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS + SIC)
https://mega.co.nz/#!6ExQEIZR!skZC-GTW2ESXdue4R7DwF0CfbkzhoFq3qhLRkfbX_WI (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS)
https://mega.co.nz/#!6RhCkTyZ!vjKvleVVGWCOn4a_8myMEBw45-KaESIYzXOj-we0uZQ (DRK + Q2C + QRK + MYR + FC + INK + ANI)
https://mega.co.nz/#!vZAQwaob!MBbM81RRQUNUB6d1jgJCT7olfmCvkUH_lQSy4tYttV4 (DRK + Q2C + QRK + MYR + FC)
https://mega.co.nz/#!XAYgiDbT!8dQtGr2H5C5JKbH9ljUn7oHzB9ij3If7HFCKmSEFw48 (DRK + Q2C + QRK + MYR)
https://mega.co.nz/#!SQJC2ZQQ!w-m3MtZW2UcBxpp6c0Tewo0edeW8e30BP50lG2xcxwk (DRK + Q2C + QRK)
https://mega.co.nz/#!2JYXHDpD!OOiFOdsh5rnvk1zhz5niXENNzbgnw1UXwmFcicBzevI (DRK only)
Builds are sorted from newest to oldest:
https://mega.co.nz/#!uAp12DYa!vhfp1wDb43mB1KCo_5ZfwXehYhBXeKcVYWbmkTB2ldg (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS + SIC + TWE + MARU)
https://mega.co.nz/#!eZhiCZbA!BDE1xMfi_6iE-PVzXxda5KtAmMbBY5tMGwXKm-sIgKY (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS + SIC + TWE)
https://mega.co.nz/#!jMx1wSQZ!FQVD-ADPhiz8Eep9yQig8_WyP43oO6dC0I5z3_Gr93Y (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS + SIC)
https://mega.co.nz/#!6ExQEIZR!skZC-GTW2ESXdue4R7DwF0CfbkzhoFq3qhLRkfbX_WI (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS)
https://mega.co.nz/#!6RhCkTyZ!vjKvleVVGWCOn4a_8myMEBw45-KaESIYzXOj-we0uZQ (DRK + Q2C + QRK + MYR + FC + INK + ANI)
https://mega.co.nz/#!vZAQwaob!MBbM81RRQUNUB6d1jgJCT7olfmCvkUH_lQSy4tYttV4 (DRK + Q2C + QRK + MYR + FC)
https://mega.co.nz/#!XAYgiDbT!8dQtGr2H5C5JKbH9ljUn7oHzB9ij3If7HFCKmSEFw48 (DRK + Q2C + QRK + MYR)
https://mega.co.nz/#!SQJC2ZQQ!w-m3MtZW2UcBxpp6c0Tewo0edeW8e30BP50lG2xcxwk (DRK + Q2C + QRK)
https://mega.co.nz/#!2JYXHDpD!OOiFOdsh5rnvk1zhz5niXENNzbgnw1UXwmFcicBzevI (DRK only)
Thanks again! I thought I wasn't going to get this running before I had to run tonight.
Happy to help
p.s. scrypt=false
thank you
April 26, 2014, 07:39:06 PM
I have several wallets on the machine, and only this one looks like this. I normally use sandbox for the wallets, just in case.
Sandbox always runs out of mem when i try to run a wallet in it. How do you get around that?
Quote
Dev is horizontally challenged atm
ROTFLMFAO!
Did you see my post above about that fix not helping?
Indeed I did…
Hmmm Still the same.
Batch file
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
"C:\Coins and pools\GroestlCoin\Gpu-DwarfPool-grs\sgminer\sgminer.exe" --config "C:\Coins and pools\GroestlCoin\Gpu-DwarfPool-grs\sgminer\Cgminer.conf"
I even added scrypt=false to config just to be sure.
Batch file
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
"C:\Coins and pools\GroestlCoin\Gpu-DwarfPool-grs\sgminer\sgminer.exe" --config "C:\Coins and pools\GroestlCoin\Gpu-DwarfPool-grs\sgminer\Cgminer.conf"
I even added scrypt=false to config just to be sure.
and was wondering if ur using the correct miner
u should b e using SPH-Sgminer 4.1 for AMD GPUs (Windows binary) available here: http://www.groestlcoin.org/pools/
also:
-k groestlcoin
or
kernel = groestlcoin
may be required
PS… scrypt=false - now im laughing my ass off too
OK, It was the Sgminer I got from the SGminer page that did me in.
https://bitcointalksearch.org/topic/ann-sph-sgminer-multi-coin-multi-algorithm-gpu-miner-added-marucoin-475795 I used the latest version Version 4.2.0
Quote
Windows binaries (compiled by badman74):
Builds are sorted from newest to oldest:
https://mega.co.nz/#!uAp12DYa!vhfp1wDb43mB1KCo_5ZfwXehYhBXeKcVYWbmkTB2ldg (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS + SIC + TWE + MARU)
https://mega.co.nz/#!eZhiCZbA!BDE1xMfi_6iE-PVzXxda5KtAmMbBY5tMGwXKm-sIgKY (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS + SIC + TWE)
https://mega.co.nz/#!jMx1wSQZ!FQVD-ADPhiz8Eep9yQig8_WyP43oO6dC0I5z3_Gr93Y (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS + SIC)
https://mega.co.nz/#!6ExQEIZR!skZC-GTW2ESXdue4R7DwF0CfbkzhoFq3qhLRkfbX_WI (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS)
https://mega.co.nz/#!6RhCkTyZ!vjKvleVVGWCOn4a_8myMEBw45-KaESIYzXOj-we0uZQ (DRK + Q2C + QRK + MYR + FC + INK + ANI)
https://mega.co.nz/#!vZAQwaob!MBbM81RRQUNUB6d1jgJCT7olfmCvkUH_lQSy4tYttV4 (DRK + Q2C + QRK + MYR + FC)
https://mega.co.nz/#!XAYgiDbT!8dQtGr2H5C5JKbH9ljUn7oHzB9ij3If7HFCKmSEFw48 (DRK + Q2C + QRK + MYR)
https://mega.co.nz/#!SQJC2ZQQ!w-m3MtZW2UcBxpp6c0Tewo0edeW8e30BP50lG2xcxwk (DRK + Q2C + QRK)
https://mega.co.nz/#!2JYXHDpD!OOiFOdsh5rnvk1zhz5niXENNzbgnw1UXwmFcicBzevI (DRK only)
Builds are sorted from newest to oldest:
https://mega.co.nz/#!uAp12DYa!vhfp1wDb43mB1KCo_5ZfwXehYhBXeKcVYWbmkTB2ldg (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS + SIC + TWE + MARU)
https://mega.co.nz/#!eZhiCZbA!BDE1xMfi_6iE-PVzXxda5KtAmMbBY5tMGwXKm-sIgKY (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS + SIC + TWE)
https://mega.co.nz/#!jMx1wSQZ!FQVD-ADPhiz8Eep9yQig8_WyP43oO6dC0I5z3_Gr93Y (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS + SIC)
https://mega.co.nz/#!6ExQEIZR!skZC-GTW2ESXdue4R7DwF0CfbkzhoFq3qhLRkfbX_WI (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS)
https://mega.co.nz/#!6RhCkTyZ!vjKvleVVGWCOn4a_8myMEBw45-KaESIYzXOj-we0uZQ (DRK + Q2C + QRK + MYR + FC + INK + ANI)
https://mega.co.nz/#!vZAQwaob!MBbM81RRQUNUB6d1jgJCT7olfmCvkUH_lQSy4tYttV4 (DRK + Q2C + QRK + MYR + FC)
https://mega.co.nz/#!XAYgiDbT!8dQtGr2H5C5JKbH9ljUn7oHzB9ij3If7HFCKmSEFw48 (DRK + Q2C + QRK + MYR)
https://mega.co.nz/#!SQJC2ZQQ!w-m3MtZW2UcBxpp6c0Tewo0edeW8e30BP50lG2xcxwk (DRK + Q2C + QRK)
https://mega.co.nz/#!2JYXHDpD!OOiFOdsh5rnvk1zhz5niXENNzbgnw1UXwmFcicBzevI (DRK only)
Thanks again! I thought I wasn't going to get this running before I had to run tonight.
April 26, 2014, 07:34:12 PM
Hey guys, I am running 2 Nvidia 770 gtxs using this bat file. The pool dashboard isn't registering that my miners are working, but the both GPU threads are running. No accepts/declines/Yay.
Any advice to solve this would be greatly appreciated. TY in advance.
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ccminer.exe -t 2 -a groestl -o stratum+tcp://cryptohunger.com:3333 -u username.workername -p password
Any advice to solve this would be greatly appreciated. TY in advance.
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ccminer.exe -t 2 -a groestl -o stratum+tcp://cryptohunger.com:3333 -u username.workername -p password
hmm… perhaps cryptohunger is having an issue atm?
could u try a differnt pool pls?
give grs.suprnova.cc or coinmine.pl/grs a try
thx
I couldnt even connect to coinmine.pl . Thats why i switched over. Having the miner actually connect and run is the best its been for GRS so far. I wonder how long the delay is on the site dashboard before it shows my productivity... i would assume around 1 or so rounds.
OK coinmine has got little hashrate, maybe adding confusion here - try grs.suprnova.cc (still must wait ~10 mins for first dashboard activity)
p.s. u did create ur own account on coinmine , then create a worker name and password right, and enetr that into ur command : ccminer.exe -t 2 -a groestl -o stratum+tcp://cryptohunger.com:3333 -u username.workername -p password ?
April 26, 2014, 07:30:48 PM
Hey guys, I am running 2 Nvidia 770 gtxs using this bat file. The pool dashboard isn't registering that my miners are working, but the both GPU threads are running. No accepts/declines/Yay.
Any advice to solve this would be greatly appreciated. TY in advance.
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ccminer.exe -t 2 -a groestl -o stratum+tcp://cryptohunger.com:3333 -u username.workername -p password
Any advice to solve this would be greatly appreciated. TY in advance.
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ccminer.exe -t 2 -a groestl -o stratum+tcp://cryptohunger.com:3333 -u username.workername -p password
hmm… perhaps cryptohunger is having an issue atm?
could u try a differnt pool pls?
give grs.suprnova.cc or coinmine.pl/grs a try
thx
I couldnt even connect to coinmine.pl . Thats why i switched over. Having the miner actually connect and run is the best its been for GRS so far. I wonder how long the delay is on the site dashboard before it shows my productivity... i would assume around 1 or so rounds.
April 26, 2014, 07:28:17 PM
Hey guys, I am running 2 Nvidia 770 gtxs using this bat file. The pool dashboard isn't registering that my miners are working, but the both GPU threads are running. No accepts/declines/Yay.
Any advice to solve this would be greatly appreciated. TY in advance.
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ccminer.exe -t 2 -a groestl -o stratum+tcp://cryptohunger.com:3333 -u username.workername -p password
Any advice to solve this would be greatly appreciated. TY in advance.
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ccminer.exe -t 2 -a groestl -o stratum+tcp://cryptohunger.com:3333 -u username.workername -p password
hmm… perhaps cryptohunger is having an issue atm?
could u try a differnt pool pls?
give grs.suprnova.cc or coinmine.pl/grs a try
thx
April 26, 2014, 07:23:40 PM
Hey guys, I am running 2 Nvidia 770 gtxs using this bat file. The pool dashboard isn't registering that my miners are working, but the both GPU threads are running. No accepts/declines/Yay.
Any advice to solve this would be greatly appreciated. TY in advance.
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ccminer.exe -t 2 -a groestl -o stratum+tcp://cryptohunger.com:3333 -u username.workername -p password
Any advice to solve this would be greatly appreciated. TY in advance.
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ccminer.exe -t 2 -a groestl -o stratum+tcp://cryptohunger.com:3333 -u username.workername -p password
April 26, 2014, 07:18:23 PM
I have several wallets on the machine, and only this one looks like this. I normally use sandbox for the wallets, just in case.
Sandbox always runs out of mem when i try to run a wallet in it. How do you get around that?
Quote
Dev is horizontally challenged atm
ROTFLMFAO!
Did you see my post above about that fix not helping?
Indeed I did…
Hmmm Still the same.
Batch file
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
"C:\Coins and pools\GroestlCoin\Gpu-DwarfPool-grs\sgminer\sgminer.exe" --config "C:\Coins and pools\GroestlCoin\Gpu-DwarfPool-grs\sgminer\Cgminer.conf"
I even added scrypt=false to config just to be sure.
Batch file
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
"C:\Coins and pools\GroestlCoin\Gpu-DwarfPool-grs\sgminer\sgminer.exe" --config "C:\Coins and pools\GroestlCoin\Gpu-DwarfPool-grs\sgminer\Cgminer.conf"
I even added scrypt=false to config just to be sure.
and was wondering if ur using the correct miner
u should b e using SPH-Sgminer 4.1 for AMD GPUs (Windows binary) available here: http://www.groestlcoin.org/pools/
also:
-k groestlcoin
or
kernel = groestlcoin
may be required
PS… scrypt=false - now im laughing my ass off too
April 26, 2014, 07:12:33 PM
I have several wallets on the machine, and only this one looks like this. I normally use sandbox for the wallets, just in case.
Sandbox always runs out of mem when i try to run a wallet in it. How do you get around that?
Quote
Dev is horizontally challenged atm
ROTFLMFAO!
Did you see my post above about that fix not helping?
April 26, 2014, 07:11:42 PM
Downloaded wallet today, v1.0.1.3, found no button to generate address ??
I'm new to this coin but that does not look like a real wallet. I'd scan for trojans quick if i were you.
NO trojan if DL'd from proper link
Dev is horizontally challenged atm
in meantime suggest u retry.
cheers
April 26, 2014, 07:10:44 PM
Downloaded wallet today, v1.0.1.3, found no button to generate address ??
I'm new to this coin but that does not look like a real wallet. I'd scan for trojans quick if i were you.
I have several wallets on the machine, and only this one looks like this. I normally use sandbox for the wallets, just in case.
April 26, 2014, 07:10:12 PM
Hmmm Still the same.
Batch file
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
"C:\Coins and pools\GroestlCoin\Gpu-DwarfPool-grs\sgminer\sgminer.exe" --config "C:\Coins and pools\GroestlCoin\Gpu-DwarfPool-grs\sgminer\Cgminer.conf"
I even added scrypt=false to config just to be sure.
Batch file
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
"C:\Coins and pools\GroestlCoin\Gpu-DwarfPool-grs\sgminer\sgminer.exe" --config "C:\Coins and pools\GroestlCoin\Gpu-DwarfPool-grs\sgminer\Cgminer.conf"
I even added scrypt=false to config just to be sure.
April 26, 2014, 07:05:59 PM
np 
THANKS MAN! I'll send u some when I get um.
this can happen if u do not add
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
to ur .bat
or run them in command prompt b4 executing miner
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
to ur .bat
or run them in command prompt b4 executing miner
Can someone tell me why I'm getting Zero Accepts/rejects/Hw errors?
I have "-k groestlcoin" in command line and this is my config with correct sgminer.
{
"pools" : [
{
…
I have "-k groestlcoin" in command line and this is my config with correct sgminer.
{
"pools" : [
{
…
THANKS MAN! I'll send u some when I get um.
April 26, 2014, 07:02:48 PM
this can happen if u do not add
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
to ur .bat
or run them in command prompt b4 executing miner
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
to ur .bat
or run them in command prompt b4 executing miner
Can someone tell me why I'm getting Zero Accepts/rejects/Hw errors?
I have "-k groestlcoin" in command line and this is my config with correct sgminer.
{
"pools" : [
{
"url" : "stratum+tcp://moria.dwarfpool.com:3345",
"user" : "FrxfH1QS3ym4dNENyQCcu27CrBVKU56dXM",
"pass" : "p",
"pool-priority" : "0"
},
{
"url" : "stratum+tcp://erebor.dwarfpool.com:3345",
"user" : "FrxfH1QS3ym4dNENyQCcu27CrBVKU56dXM",
"pass" : "p",
"pool-priority" : "1"
}
],
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "1",
"failover-only" : true,
"hotplug" : "5",
"kernel-path" : "/usr/local/bin",
"kernel" : "groestlcoin",
"log" : "5",
"no-submit-stale" : true,
"queue" : "0",
"scan-time" : "1",
"shares" : "0",
"verbose" : true,
"auto-fan" : true,
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "1239,1169",
"gpu-fan" : "0-85",
"gpu-platform" : "1",
"gpu-memclock" : "1500,1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.938",
"intensity" : "13,18",
"temp-target" : "70",
"temp-overheat" : "85",
"temp-cutoff" : "88",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "256,256",
"lookup-gap" : "2",
"shaders" : "1536,1280",
"thread-concurrency" : "8128,10239",
"no-pool-disable" : true
}
Says it is hashing at 4.2M on a 7870xt.
I have "-k groestlcoin" in command line and this is my config with correct sgminer.
{
"pools" : [
{
"url" : "stratum+tcp://moria.dwarfpool.com:3345",
"user" : "FrxfH1QS3ym4dNENyQCcu27CrBVKU56dXM",
"pass" : "p",
"pool-priority" : "0"
},
{
"url" : "stratum+tcp://erebor.dwarfpool.com:3345",
"user" : "FrxfH1QS3ym4dNENyQCcu27CrBVKU56dXM",
"pass" : "p",
"pool-priority" : "1"
}
],
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "1",
"failover-only" : true,
"hotplug" : "5",
"kernel-path" : "/usr/local/bin",
"kernel" : "groestlcoin",
"log" : "5",
"no-submit-stale" : true,
"queue" : "0",
"scan-time" : "1",
"shares" : "0",
"verbose" : true,
"auto-fan" : true,
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "1239,1169",
"gpu-fan" : "0-85",
"gpu-platform" : "1",
"gpu-memclock" : "1500,1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0.938",
"intensity" : "13,18",
"temp-target" : "70",
"temp-overheat" : "85",
"temp-cutoff" : "88",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "256,256",
"lookup-gap" : "2",
"shaders" : "1536,1280",
"thread-concurrency" : "8128,10239",
"no-pool-disable" : true
}
Says it is hashing at 4.2M on a 7870xt.
THANKS MAN! I'll send u some when I get um.
April 26, 2014, 07:02:00 PM
Downloaded wallet today, v1.0.1.3, found no button to generate address ??
I'm new to this coin but that does not look like a real wallet. I'd scan for trojans quick if i were you.
Jump to: