Topic: [ANN]INNOVA - We strive for innovation and adoption! | Hybrid Tribus coin - page 66. (Read 154447 times)

Are you running any firewall? The guides don't mention allowing the extra port added with rpcport commands called for in the sentinel part of the guide. In my understanding - this rpcport command is an option used when you want a custom port for that - it should just use the default port coded into the software. Many times I haven't included these rpcport commands and all works well -but- here with the addition of Sentinel and the Sentinel code being clipped right from DASH, the code might be defaulting to a port used by DASH - So a mis-match with native Innova code. The rpcport commands in both .conf files would be important to allow the rpc crosstalk. (just fishing for your problem..)

I have gotten another reward just less than 12hrs from previous. Crossed fingers and best luck to others.
have missed about 3 rewards (30 coins) while hacking through all this...

Are you using a linux vps? If you are, when you in the sentinel folder and issue this command " venv/bin/python bin/sentinel.py " what response do you get?

If status on your VPS node is ENABLED, then don't care about home wallet status as it's usually not accuracy. I got different status for the past few days like NEW_START_REQUIRED and WATCHDOG_EXPIRED but on VPS node it's showing ENABLED. So I just let the node run for a while, after 3 days I got 80 INN , so I guess I was right 

Hope that helps

11:22:35
masternode start

11:22:35
Not capable masternode: Broadcasted IP doesn't match our external address. Make sure you issued a new broadcast if IP of this masternode changed recently.

How to solve this? I have a normal white IP, a normal computer, other nodes work fine.

Thanks good to know, I might avoid it for a while.  My VIVO nodes went through this but they are working ok after sentinel install.  

If you like solid nodes you should get some Crave nodes..  They are very stable and pretty cheap right now.

So anyone can tell me why my MN is shit?!  I know MN setups inside and out, I have Vivo, Desire, Bitcloud, Solaris....Why is Innova such a pain in the ass? I show everything that I should in my VPS including correct sentinel responses and VPS reports masternode started successfully, However I still show watchdog expired on the local wallet and have not received any payouts for 2 days! And when I have been able to get it to show "ENABLED" god only knows the reason, it shortly within hours returs to watchdog or expired.
If I am doing something wrong I would LOVE someone to tell me what it is, in fact you get me the answer I swear I will pay you a bounty in the coin of your choice. Otherwise I will off this shit on the market and move on! I am also irritated at the lack of Dev/Support, whoever they are, response to such a problem.
Honestly I would like an answer more than anything as to what the CAUSE of this is.
Thanks for any help   And yes I have been on BCT to check answers there and have follwed the guides, I am no crypto noob been around since there were only 12 coins listed on CMC. I also realize that payments can still be received with the watchdog expired warning, and yes  cron for sentinel is running! Like I said in the beginning I have all the affected MN coins, only this one has wasted more of my time than all of the others combined. Hope I sound pissed because I am!!!

Hello Guys,

I just joined this one, good luck to all!

Let's hope it was the right time to do so...

Happy trading. Keep it up devs.

Reward coins arrive into the same address holding your 1000 stake. Since masternode set-up uses "Coin Control" active your wallet will break each transaction into a detail-sub-list. After getting a reward or two, click [Send] and then always click [Inputs] to select which coins that you will allow sending. Coins clicked will total up to a spendable balance. The idea is to NEVER click on that one with the 1000 coins unless you are closing node - BUT YOU SHOULD JUST HODL!  Hold on to those coins - i plan to save mine for another node...

Not much talk about running hot/cold masternode with sentinel.
My MN runs a local WIN-QT cold control wallet and a remote ubuntu 14 VPS hot node wallet.
IT CAN WORK. (It would have been nice to hear THAT instead of all my head banging).
-
The deleting of listed files and "re-index" were needed on both wallets to get them synced on chain.
There was a list of updated addnodes posted that I edit/replaced on on both .conf files.
I've got sentinel loaded with its cron job running only on the VPS, it is holding as "status ENABLED" 24/7 (finally)
-
One trick was remember to allow the new port through your firewall if you added rpcport commands in .conf.
-
The WIN-QT wallet without sentinel will still report "watchdog expired" as status from the masternode tab.
If I log into the VPS, it reports it's status as "ENABLED" during the same time..
The Win-QT always goes back to "ENABLED" after a bit.
-
So here is a question: Will I lose any rewards while WIN-QT without sentinel toggles into "watchdog expired" status?
It does not make sense that this also needs to run Sentinel and report every 5 min - it is normally off anyway.
Otherwise any cold wallet set-up will be a cripple.
I'm just betting on that little note saying "this wallet reports wrong status" or whatever...

Look for post there by user lentyna - November 10, 2017, 03:48:48 AM (page 75? - it changes.)
The original posted by bluelight123 gets cleaned up a bit...
Thanks to both, I also referred to the VIVO and DASH guides.

Quite a hack job but I'm now on the right chain with sentinel running and getting rewards (one in 23 hours so slow start).

No, I want to say my wallet innova in cryptopia exchange. I can't do anything, just wait. I opened a ticket two days ago, but they do not answer.

- More than 90% MNs back online, enabled and receiving rewards including mines without any problem
- Watchdog_expired issue can be solved by installing sentinel, all guides are already there, you just need to follow like all of us did
- Crytopia re-synced their wallet , all new transactions are working perfectly. Old transactions required opening a ticket to remind them

Things are going just fine

If you have 1000 INN in your wallet( Masternode) and you mine a block where does that go? Dos the 10 add to your masternode? or do you get it in another address?

Maybe you can try to type in the debug console "repairwallet".

It stayts that the coins is 50/50 POS/POW and the block reward is 20

does that meen that this calc is right? https://www.coinwarz.com/calculators/feathercoin-mining-calculator/?h=50000.00&p=0.00&pc=0.00&pf=0.00&d=214.60499386&r=10.00000000&er=0.00049962&btcer=7837.67730000&hc=0.00

I have 50Mh/s farm and want to know how long it will take to mine 1000 INN

what's the matter? why the problem of fckn watchdogs is not solved?! Many complaints!

I'm glad that with this coin everything is fine for me, at least until everything goes well.

MasterNode guide link on first page going to 76 page of this topic, and there I can't found any MN-Guide!!! WTF  

So I went through all kinds of problems with this sentinel upgrade. I'm not a programmer, but not technically ignorant either.
But I have felt like a complete idiot for days!!! LOL 

Unlike me normally, I finally gave up, sent all my coins to an exchange, uninstalled everything. Started over... still had problems... I must be an idiot.
So, I gave up again(this never happens, but my frustration levels were seriously maxed).

Then I set up an account on nodevps, had everything running in about 45 min to an hr (first time using them, so took a minute to familiarize myself)
and success!!! ENABLED in a few minutes and first payment this morning.. FINALLY

I cant speak for anything else about the service yet, but that was one of the best decisions Ive made, especially for the 5 bucks it cost me.
Now... to set up another mn on there.. 

How to run mascot using Node-vps.com? I could not get rid of the watchdog expired. I did not find a solution to my problem