[ANN]INNOVA - We strive for innovation and adoption! | Hybrid Tribus coin - page 70.

armspec

newbie

Activity: 62

Merit: 0

Quote from: GhostMinerBox on November 16, 2017, 08:25:13 PM

Go back to the masternode setup guide you used and setup you masternode.conf file. I followed this guide https://docs.google.com/document/d/1L8AbY225aaoWc3XRxRsWNI8ROLI7QNlZ5RmuW3uQBuI/edit# which is universal for all coins. In your single wallet setup all manipulations are done on a single wallet where it refers to VPS or PC wallet.

After you setup your masternode.conf file, restart your wallet, start your MN by Start alias from the Masternodes Tab of your wallet, then run the Sentinel, then (just in case) Start aliase again, and you should see ENABLED in a short while,

shit... ok...doing this now

GhostMinerBox

member

Activity: 98

Merit: 10

Go back to the masternode setup guide you used and setup you masternode.conf file. I followed this guide https://docs.google.com/document/d/1L8AbY225aaoWc3XRxRsWNI8ROLI7QNlZ5RmuW3uQBuI/edit# which is universal for all coins. In your single wallet setup all manipulations are done on a single wallet where it refers to VPS or PC wallet.

After you setup your masternode.conf file, restart your wallet, start your MN by Start alias from the Masternodes Tab of your wallet, then run the Sentinel, then (just in case) Start aliase again, and you should see ENABLED in a short while,

armspec

newbie

Activity: 62

Merit: 0

Quote from: GhostMinerBox on November 16, 2017, 08:11:28 PM

Quote from: armspec on November 16, 2017, 08:09:50 PM

Quote from: GhostMinerBox on November 16, 2017, 08:00:05 PM

Quote from: armspec on November 16, 2017, 07:47:33 PM

Quote from: GhostMinerBox on November 16, 2017, 07:43:08 PM

Those of you who just discovered your MN with the WATCHDOG_EXPIRED status, look a couple of pages back where I posted how to fix this problem if you run you MN on a Windows qt wallet.

Thank you for that. I just finished going through the process. I have it set up, but now it says NEW START REQUIRED...

Start alias and wait for a bit - it will turn to ENABLED

Ok, but there is this... My masternode is not listed under My Masternodes, but it does show under All Masternodes... So when I click Start Alias nothing happens..

I literally just set this mn up and got one payment and woke up to this... but when I got the payment it wasnt showing in My Masternodes tab either...

Are you running it on a single wallet or dual wallet setup?

I have a single wallet setup.. I have another wallet on my pc, but its not setup with the mn wallet on my vps (sorry my newbie status is not letting me post very quickly)

GhostMinerBox

member

Activity: 98

Merit: 10

Quote from: armspec on November 16, 2017, 08:09:50 PM

Quote from: GhostMinerBox on November 16, 2017, 08:00:05 PM

Quote from: armspec on November 16, 2017, 07:47:33 PM

Quote from: GhostMinerBox on November 16, 2017, 07:43:08 PM

Those of you who just discovered your MN with the WATCHDOG_EXPIRED status, look a couple of pages back where I posted how to fix this problem if you run you MN on a Windows qt wallet.

Thank you for that. I just finished going through the process. I have it set up, but now it says NEW START REQUIRED...

Start alias and wait for a bit - it will turn to ENABLED

Ok, but there is this... My masternode is not listed under My Masternodes, but it does show under All Masternodes... So when I click Start Alias nothing happens..

I literally just set this mn up and got one payment and woke up to this... but when I got the payment it wasnt showing in My Masternodes tab either...

Are you running it on a single wallet or dual wallet setup?

armspec

newbie

Activity: 62

Merit: 0

Quote from: GhostMinerBox on November 16, 2017, 08:00:05 PM

Quote from: armspec on November 16, 2017, 07:47:33 PM

Quote from: GhostMinerBox on November 16, 2017, 07:43:08 PM

Those of you who just discovered your MN with the WATCHDOG_EXPIRED status, look a couple of pages back where I posted how to fix this problem if you run you MN on a Windows qt wallet.

Thank you for that. I just finished going through the process. I have it set up, but now it says NEW START REQUIRED...

Start alias and wait for a bit - it will turn to ENABLED

Ok, but there is this... My masternode is not listed under My Masternodes, but it does show under All Masternodes... So when I click Start Alias nothing happens..

I literally just set this mn up and got one payment and woke up to this... but when I got the payment it wasnt showing in My Masternodes tab either...

GhostMinerBox

member

Activity: 98

Merit: 10

Quote from: armspec on November 16, 2017, 07:47:33 PM

Quote from: GhostMinerBox on November 16, 2017, 07:43:08 PM

Those of you who just discovered your MN with the WATCHDOG_EXPIRED status, look a couple of pages back where I posted how to fix this problem if you run you MN on a Windows qt wallet.

Thank you for that. I just finished going through the process. I have it set up, but now it says NEW START REQUIRED...

Start alias and wait for a bit - it will turn to ENABLED

armspec

newbie

Activity: 62

Merit: 0

Quote from: GhostMinerBox on November 16, 2017, 07:43:08 PM

Those of you who just discovered your MN with the WATCHDOG_EXPIRED status, look a couple of pages back where I posted how to fix this problem if you run you MN on a Windows qt wallet.

Thank you for that. I just finished going through the process. I have it set up, but now it says NEW START REQUIRED...

GhostMinerBox

member

Activity: 98

Merit: 10

Those of you who just discovered your MN with the WATCHDOG_EXPIRED status, look a couple of pages back where I posted how to fix this problem if you run you MN on a Windows qt wallet.

danspasiva

full member

Activity: 417

Merit: 105

Quote from: piramid on November 16, 2017, 07:03:33 PM

Don't panic, these problems occur regularly on crytopia.
All repaired and will be credited your coins, only sometimes they do it for a very long time.

This. I think just like many of us, their wallet must be out of sync and many of us haven't received our coins. Just be patient as I'm certain none of our coins are lost, they are just stuck temporarily until Topia re-syncs.

piramid

full member

Activity: 400

Merit: 101

Don't panic, these problems occur regularly on crytopia.
All repaired and will be credited your coins, only sometimes they do it for a very long time.

clementina

newbie

Activity: 59

Merit: 0

Quote from: Dizz999 on November 16, 2017, 05:31:54 PM

Quote from: darklion84 on November 16, 2017, 04:16:42 PM

500 coins stuck on Cryptopia. In status "confirmed" and has tx id, but this tx id didn't exist on block explorer. So I think it's from another chain.
But two other transactions came well. So I think there're TWO wallets at least in Cryptopia. And one of them is in the wrong chain.
And they don't answer tickets.

I have the same problem stuck with 303 coins
And they don't answer tickets.

What is happening today with Master nodes?
all the master nodes are now in the status WATCHDOG_EXPIRED
looked masternode list there right now half of nodes with such status
what does one hundred think about this?

the same problem happens to me, the transaction has many confirmations, but in my cryptopia wallet do not appear my innova coins

lentyna

full member

Activity: 280

Merit: 100

Quote from: Dizz999 on November 16, 2017, 06:14:10 PM

http://innovacoin.info/masternode-guides/sentinel-guide/

it is impossible to put on this instrument

Code:

root@vultr:~/sentinel# venv/bin/python bin/sentinel.py
dashd not synced with network! Awaiting full sync before running Sentinel.

How can this be?
why it is requested dashd?

all the master nodes are now in the status WATCHDOG_EXPIRED

I suspect that it is necessary to install sentinel
But I can not install according to this instruction

Instructions are good.

ma7555

member

Activity: 65

Merit: 11

Quote from: Aleksiusha on November 16, 2017, 03:59:10 PM

Quote from: finthebar on November 16, 2017, 03:21:07 PM

Quote from: Aleksiusha on November 16, 2017, 03:07:53 PM

Still didnt receive coins that i send to cryptopia today and some stuck few days ago. cryptopia actually just garbage. need better exchange. i like coinmarket.com more

anyone receive coinst on his cryptopia account in last few hours?

Its funny, most people seem to have the reverse of this view. I actually find Cryptopia to be pretty good - Coinsmarket is not that bad either, but it does seem to be much lower volume which can lead to difficult trading.

You could try backup your InnovaCore directory and then reopen the qt again - shut it down and restore just your wallet.dat and leave the whole thing sync from scratch - just incase for some reason there was something funny going on.

4 times coinst just stuck on cryptopia, i never had issues like that with othere exchanges, and i am not the only one who have this problem. that actually looks really strange to me and support really slow.

It's not only you, their wallet is still not synced till now

Dizz999

newbie

Activity: 51

Merit: 0

http://innovacoin.info/masternode-guides/sentinel-guide/

it is impossible to put on this instrument

Code:

root@vultr:~/sentinel# venv/bin/python bin/sentinel.py
dashd not synced with network! Awaiting full sync before running Sentinel.

How can this be?
why it is requested dashd?

all the master nodes are now in the status WATCHDOG_EXPIRED

I suspect that it is necessary to install sentinel
But I can not install according to this instruction

diptocoli

member

Activity: 89

Merit: 10

A few hours ago, I sent the coin to cryptotia but I have not received it yet. What happened?

lombo66

newbie

Activity: 21

Merit: 0

Quote from: firesec on November 16, 2017, 02:28:55 PM

Quote from: sc0rp1on on November 16, 2017, 04:16:23 AM

-342: non-JSON HTTP response with '401 Unauthorized' from server
Cannot connect to dashd. Please ensure dashd is running and the JSONRPC port is open to Sentinel.

Can anyone help on this error?

sounds like the innovad daemon wasn't started

what does it mean for win vps?

Dizz999

newbie

Activity: 51

Merit: 0

Quote from: darklion84 on November 16, 2017, 04:16:42 PM

500 coins stuck on Cryptopia. In status "confirmed" and has tx id, but this tx id didn't exist on block explorer. So I think it's from another chain.
But two other transactions came well. So I think there're TWO wallets at least in Cryptopia. And one of them is in the wrong chain.
And they don't answer tickets.

I have the same problem stuck with 303 coins
And they don't answer tickets.

What is happening today with Master nodes?
all the master nodes are now in the status WATCHDOG_EXPIRED
looked masternode list there right now half of nodes with such status
what does one hundred think about this?

darklion84

newbie

Activity: 53

Merit: 0

500 coins stuck on Cryptopia. In status "confirmed" and has tx id, but this tx id didn't exist on block explorer. So I think it's from another chain.
But two other transactions came well. So I think there're TWO wallets at least in Cryptopia. And one of them is in the wrong chain.
And they don't answer tickets.

oddity2505

member

Activity: 120

Merit: 10

I also stopped receiving my coins on Cryptopia. Neither from the pool nor from another exchange. I contacted the support as well - hope they will resync or fix the problem any other way soon.

Slog

member

Activity: 197

Merit: 10

Quote from: coco23 on November 16, 2017, 03:25:08 PM

So I got some rewards and shortly after again WATCHDOG EXPIRED. Almost all the MN have this status according to the MN-tab.

The blockchain seemed to be stuck, so I reindexed and restarted the MN, but still got it. So are there problems again? What to do?

Did you create a cron job to run Sentinel every 5 min?

Topic: [ANN]INNOVA - We strive for innovation and adoption! | Hybrid Tribus coin - page 70. (Read 154438 times)