Topic: [ANN][JPC]MAKE JACKPOTCOIN GREAT AGAIN! - page 296. (Read 470275 times)
Is the pow end？
about AMD miner errors.. you guys i am not that gear with it but do have some knowledge on it PM me if you want eh for help..
i know for a fact if the TC is too high your will get that exact error.. i get it lots pushing the TC up myself..
and YES i do know you guys keep saying your using the stock settings auto configured but maybe try setting manually to a Low / Safe amount ?
the auto-detection routines may be screwing you guys because your have rare gpu's etc.. if you don't want to specify the TC then google search your card and
try using the stream processor count and put that in a conf as your shader count and put 0 for TC.
if TC is specified it over-rides the shader count setting.. you can only use one or the other.
The point of TC is to manually over ride the shader count option.. and the auto routines that get triggered.
i know for a fact if the TC is too high your will get that exact error.. i get it lots pushing the TC up myself..
and YES i do know you guys keep saying your using the stock settings auto configured but maybe try setting manually to a Low / Safe amount ?
the auto-detection routines may be screwing you guys because your have rare gpu's etc.. if you don't want to specify the TC then google search your card and
try using the stream processor count and put that in a conf as your shader count and put 0 for TC.
if TC is specified it over-rides the shader count setting.. you can only use one or the other.
The point of TC is to manually over ride the shader count option.. and the auto routines that get triggered.
The TC error while compiling, you speak about, is "error -61" clCreateBuffer and it has nothing to do (in my opinion) with the "error -43" which is clBuildProgram. I've made a conf file with shaders only (for 6770m with Turks it's 480 shaders) and it didn't helped. Also I've tried changing "lookup-gap", "thread-concurrency", "gpu-threads", "worksize" without any luck -.-'
also i said earlier pack up (winrar or 7zip etc) and share your miner install so i can verify it using hex compare tools..
if i find 1 single byte different then that could be enough to screw you eh..
if i find 1 single byte different then that could be enough to screw you eh..
Already did, so check your e-mail pls. Sended from domain @op.pl. As you can see it's only a pure miner downloaded from 1st page (the same error with main link and the mirror). There's only batch file changed with the pool name, worker, pass, --no-adl command; nothing more.
and guy i told you sgminer is not detecting your card.. so ya that compiler is going to fail building the kernel.. it never found the card lol
i also think it's odd you have soooo much trouble getting the wallet to sync and how like i said earlier i have had corrupt file cause that.
if the miner didn't detect your card don't expect it to work..
notice several pages back i posted my devices picture to compare to your and i said look how yours does NOT say GPU: device 0 assigned ? but mine does ?
i also think it's odd you have soooo much trouble getting the wallet to sync and how like i said earlier i have had corrupt file cause that.
if the miner didn't detect your card don't expect it to work..
notice several pages back i posted my devices picture to compare to your and i said look how yours does NOT say GPU: device 0 assigned ? but mine does ?
I know the miner is not "recognizing" my card properly. It's caused by switchable graphic, but only sgminer can't build the kernel of jackpotcoin. F.e. my scrypt cgminer (3.7.2) gaves me the same "error" with recognizing, but it starts properly with only HW monitoring off, the miner works fine and mine with it's best hashrate without any HW errors or rejections (beside the "stales"). So my questions is wtf is wrong with that jackpot kernel. More of that, just a while ago I've used sgminer 4.1.0 with ckolivas kernel to mine doge's. Works perfectly beside the HW monitoring error. So it seems that only jackpotcoin kernel has the problem with compiling/initialising gpu.
If the bin file created by the miner be a good way for devs to check for the error I'm getting, just let me know and I'll share it with you via email or some hosting site.
pack up all your files.. do both maybe the roaming folder (just remove your wallet .dat before sharing publicly) and also the miner folder and all it's contents) censor your login info etc
i will take the time to verify it's not corrupt or you missed something or have a bad config etc.. i keep offering but i am still waiting.
trouble shooting is starting at step one guys lol
send it publicly or to me via pm or email [email protected] and tell me to check my mail though i don't check it too often lol
i will take the time to verify it's not corrupt or you missed something or have a bad config etc.. i keep offering but i am still waiting.
trouble shooting is starting at step one guys lol
send it publicly or to me via pm or email [email protected] and tell me to check my mail though i don't check it too often lol
I've already solved the problem with nonsynchronizing wallet and state the solution in my last post to "others who would have the same problem"
edit:
i see something worked i suggest just glad you got it fixed i hate pulling my hair out so i know how you feel eh when stuff gets stuck in your craw lol
gl with the wallet though.
editz:
i don't know as much as some guys but they don't say fuck all.. they will sit in the corner being experts waiting to tell you your wrong while contributing nothing ever.
got game ? want some crypto clout then you ONLY get it by being apart of the scene and stepping up.. the quiet guy in the corner is nobody !
i don't care what the title is.. super mega ultra hero member or what ever.. title means squat
anyway
i did more work on the cpu miner pretty quick moved init out of loop like on quark but it's still based on Nek's code so that means it's slow lol
if the OP or who ever made the first miner used UncleBob's quark miner as the base it would have bee a LOT faster..
looked into a what chubner said too.. another "watcher" lol
making progress with compiler options too.
cloudminer went down while back too no idea what is goin on there.. can't connect to pool and site is not respond.. DDOS ?
Here is the summary of pools' policy about the Jackpot (it's in OP as well of course)
https://www.minep.it/pool/jpc/ Split the reward as with any other normal block. Based on shares that round
http://www.verters.com/mvpool/jackpotcoin
http://www.hashharder.com/jha/jackpotcoin We will share the block proportionally amongst the miners of the jackpot round.
http://jpc.cloudminers.net/ Block finder gets 50% of the jackpot, the rest of other miners that round will get the other 50% according to their share contribution.
http://jackpotcoin.miningpoolhub.com/ Block finder gets 50% of jackpot, rest of other miners will get proportional to their share contribution.
I didn't find a way to contact verters so if anyone is in contact with them, please ask them to reply.
https://www.minep.it/pool/jpc/ Split the reward as with any other normal block. Based on shares that round
http://www.verters.com/mvpool/jackpotcoin
http://www.hashharder.com/jha/jackpotcoin We will share the block proportionally amongst the miners of the jackpot round.
http://jpc.cloudminers.net/ Block finder gets 50% of the jackpot, the rest of other miners that round will get the other 50% according to their share contribution.
http://jackpotcoin.miningpoolhub.com/ Block finder gets 50% of jackpot, rest of other miners will get proportional to their share contribution.
I didn't find a way to contact verters so if anyone is in contact with them, please ask them to reply.
great job on that !
hm the whole value of verything mined amounts to about 10 btc? am I missing something here?
hey to the two guy saying they couldn't get the kernel to compile on launch error.. i ran --help
and i seen a command that may help and i also verified it actually does something lol
i also replied with some ideas earlier too if you missed it..
so i tried that for testing and it did not make me any slower and hex comparing the compiled kernels it for sure changed a lot of the code optimized.
worth a shot if your still struggling eh guys
In case it's not obvious the kernels files are raw source code and the miner compiles the code into a binary form of the kernel on launch (*.bin)
and i seen a command that may help and i also verified it actually does something lol
i also replied with some ideas earlier too if you missed it..
Quote
--gpu-opt Select OpenCL compiler optimization level (0~5, default: 5)
so i tried that for testing and it did not make me any slower and hex comparing the compiled kernels it for sure changed a lot of the code optimized.
worth a shot if your still struggling eh guys
In case it's not obvious the kernels files are raw source code and the miner compiles the code into a binary form of the kernel on launch (*.bin)
MAAAAANNNN , you're just a fckn brilliant guy with awesome ideas
It finally SOLVED the problem !!!!!!!!!!!!!!! From that moment we should start something like building the "wiki" for that coin so all problems solutions (especially those with hardware) had their own place to stay For my switchable notebook gpu radeon 6770m works --gpu-opt
Mining hashrate for 6770m (@850MHz GPU 900MHz memory) on jackpot is around 700 kH/s with intensity of 18 and no HW/ reject errors^^
Thank you once again Spoetnik. Really great job done^^
Also remember to vote 5 times per hour
JackpotCoin has just been added to Mintpal's public voting page so
VOTE!
https://www.mintpal.com/voting
JackpotCoin has just been added to Mintpal's public voting page so
VOTE!
https://www.mintpal.com/voting
Twitter giveaway!
5000 JPC for everyone* doing the following:
1.Follow our twitter https://twitter.com/JackpotCoin
2.Retweet this tweet https://twitter.com/JackpotCoin/status/461970623041142784, and favorite it
3.Reply the tweet with your JackpotCoin address.
*(limited to the first 1000)
Facebook giveaway!
5000 JPC for everyone* doing the following:
1. Like our page https://www.facebook.com/pages/JackpotCoin/1444360855808732
2. Post your JPC address here and only here https://www.facebook.com/permalink.php?story_fbid=1450359411875543&id=1444360855808732&stream_ref=10
*(limited to the first 1000)
5000 JPC for everyone* doing the following:
1.Follow our twitter https://twitter.com/JackpotCoin
2.Retweet this tweet https://twitter.com/JackpotCoin/status/461970623041142784, and favorite it
3.Reply the tweet with your JackpotCoin address.
*(limited to the first 1000)
Facebook giveaway!
5000 JPC for everyone* doing the following:
1. Like our page https://www.facebook.com/pages/JackpotCoin/1444360855808732
2. Post your JPC address here and only here https://www.facebook.com/permalink.php?story_fbid=1450359411875543&id=1444360855808732&stream_ref=10
*(limited to the first 1000)
Nice giveaways
Twitter giveaway!
5000 JPC for everyone* doing the following:
1.Follow our twitter https://twitter.com/JackpotCoin
2.Retweet this tweet https://twitter.com/JackpotCoin/status/461970623041142784, and favorite it
3.Reply the tweet with your JackpotCoin address.
*(limited to the first 1000)
Facebook giveaway!
5000 JPC for everyone* doing the following:
1. Like our page https://www.facebook.com/pages/JackpotCoin/1444360855808732
2. Post your JPC address here and only here https://www.facebook.com/permalink.php?story_fbid=1450359411875543&id=1444360855808732&stream_ref=10
*(limited to the first 1000)
5000 JPC for everyone* doing the following:
1.Follow our twitter https://twitter.com/JackpotCoin
2.Retweet this tweet https://twitter.com/JackpotCoin/status/461970623041142784, and favorite it
3.Reply the tweet with your JackpotCoin address.
*(limited to the first 1000)
Facebook giveaway!
5000 JPC for everyone* doing the following:
1. Like our page https://www.facebook.com/pages/JackpotCoin/1444360855808732
2. Post your JPC address here and only here https://www.facebook.com/permalink.php?story_fbid=1450359411875543&id=1444360855808732&stream_ref=10
*(limited to the first 1000)
about AMD miner errors.. you guys i am not that gear with it but do have some knowledge on it PM me if you want eh for help..
i know for a fact if the TC is too high your will get that exact error.. i get it lots pushing the TC up myself..
and YES i do know you guys keep saying your using the stock settings auto configured but maybe try setting manually to a Low / Safe amount ?
the auto-detection routines may be screwing you guys because your have rare gpu's etc.. if you don't want to specify the TC then google search your card and
try using the stream processor count and put that in a conf as your shader count and put 0 for TC.
if TC is specified it over-rides the shader count setting.. you can only use one or the other.
The point of TC is to manually over ride the shader count option.. and the auto routines that get triggered.
i know for a fact if the TC is too high your will get that exact error.. i get it lots pushing the TC up myself..
and YES i do know you guys keep saying your using the stock settings auto configured but maybe try setting manually to a Low / Safe amount ?
the auto-detection routines may be screwing you guys because your have rare gpu's etc.. if you don't want to specify the TC then google search your card and
try using the stream processor count and put that in a conf as your shader count and put 0 for TC.
if TC is specified it over-rides the shader count setting.. you can only use one or the other.
The point of TC is to manually over ride the shader count option.. and the auto routines that get triggered.
The TC error while compiling, you speak about, is "error -61" clCreateBuffer and it has nothing to do (in my opinion) with the "error -43" which is clBuildProgram. I've made a conf file with shaders only (for 6770m with Turks it's 480 shaders) and it didn't helped. Also I've tried changing "lookup-gap", "thread-concurrency", "gpu-threads", "worksize" without any luck -.-'
also i said earlier pack up (winrar or 7zip etc) and share your miner install so i can verify it using hex compare tools..
if i find 1 single byte different then that could be enough to screw you eh..
if i find 1 single byte different then that could be enough to screw you eh..
Already did, so check your e-mail pls. Sended from domain @op.pl. As you can see it's only a pure miner downloaded from 1st page (the same error with main link and the mirror). There's only batch file changed with the pool name, worker, pass, --no-adl command; nothing more.
and guy i told you sgminer is not detecting your card.. so ya that compiler is going to fail building the kernel.. it never found the card lol
i also think it's odd you have soooo much trouble getting the wallet to sync and how like i said earlier i have had corrupt file cause that.
if the miner didn't detect your card don't expect it to work..
notice several pages back i posted my devices picture to compare to your and i said look how yours does NOT say GPU: device 0 assigned ? but mine does ?
i also think it's odd you have soooo much trouble getting the wallet to sync and how like i said earlier i have had corrupt file cause that.
if the miner didn't detect your card don't expect it to work..
notice several pages back i posted my devices picture to compare to your and i said look how yours does NOT say GPU: device 0 assigned ? but mine does ?
I know the miner is not "recognizing" my card properly. It's caused by switchable graphic, but only sgminer can't build the kernel of jackpotcoin. F.e. my scrypt cgminer (3.7.2) gaves me the same "error" with recognizing, but it starts properly with only HW monitoring off, the miner works fine and mine with it's best hashrate without any HW errors or rejections (beside the "stales"). So my questions is wtf is wrong with that jackpot kernel. More of that, just a while ago I've used sgminer 4.1.0 with ckolivas kernel to mine doge's. Works perfectly beside the HW monitoring error. So it seems that only jackpotcoin kernel has the problem with compiling/initialising gpu.
If the bin file created by the miner be a good way for devs to check for the error I'm getting, just let me know and I'll share it with you via email or some hosting site.
pack up all your files.. do both maybe the roaming folder (just remove your wallet .dat before sharing publicly) and also the miner folder and all it's contents) censor your login info etc
i will take the time to verify it's not corrupt or you missed something or have a bad config etc.. i keep offering but i am still waiting.
trouble shooting is starting at step one guys lol
send it publicly or to me via pm or email [email protected] and tell me to check my mail though i don't check it too often lol
i will take the time to verify it's not corrupt or you missed something or have a bad config etc.. i keep offering but i am still waiting.
trouble shooting is starting at step one guys lol
send it publicly or to me via pm or email [email protected] and tell me to check my mail though i don't check it too often lol
I've already solved the problem with nonsynchronizing wallet and state the solution in my last post to "others who would have the same problem"
JackpotCoin has just been added to Mintpal's public voting page so
VOTE!
https://www.mintpal.com/voting
5 votes per hour!
VOTE!
https://www.mintpal.com/voting
5 votes per hour!
Will vote 5/hour when im at the computer which I am A LOT
I also sponsor voted, its just 0.02 for 100 votes... if everyone does that I guess JPC will be added even faster!
hey to the two guy saying they couldn't get the kernel to compile on launch error.. i ran --help
and i seen a command that may help and i also verified it actually does something lol
i also replied with some ideas earlier too if you missed it..
so i tried that for testing and it did not make me any slower and hex comparing the compiled kernels it for sure changed a lot of the code optimized.
worth a shot if your still struggling eh guys
In case it's not obvious the kernels files are raw source code and the miner compiles the code into a binary form of the kernel on launch (*.bin)
and i seen a command that may help and i also verified it actually does something lol
i also replied with some ideas earlier too if you missed it..
Quote
--gpu-opt Select OpenCL compiler optimization level (0~5, default: 5)
so i tried that for testing and it did not make me any slower and hex comparing the compiled kernels it for sure changed a lot of the code optimized.
worth a shot if your still struggling eh guys
In case it's not obvious the kernels files are raw source code and the miner compiles the code into a binary form of the kernel on launch (*.bin)
JackpotCoin has just been added to Mintpal's public voting page so
VOTE!
https://www.mintpal.com/voting
5 votes per hour!
VOTE!
https://www.mintpal.com/voting
5 votes per hour!
voted!
Their eyes are on other high volume coins at the moment, let's organically work up the volume. Patience everyone, the devs are great, launch was seamless, coin structure/algo is unique, and the community has been pleasant since launch. We will get there!
Agreed. A few weeks yet possibly.
Difficulty is going up. I think that means it's getting more miners.
what volume?
Trading volume on current exchange(s).
Exchanges never want to be left out of the action if there's any to be had because thats where they make their money.
Their eyes are on other high volume coins at the moment, let's organically work up the volume. Patience everyone, the devs are great, launch was seamless, coin structure/algo is unique, and the community has been pleasant since launch. We will get there!
JackpotCoin has just been added to Mintpal's public voting page so
VOTE!
https://www.mintpal.com/voting
5 votes per hour!
VOTE!
https://www.mintpal.com/voting
5 votes per hour!
Oh ~ yes, let us vote ~~~~~
what volume?
Trading volume on current exchange(s).
Exchanges never want to be left out of the action if there's any to be had because thats where they make their money.
I just received a message form Mintpal:
*********************************************************************************
b.t.w. If the volume goes up enough they'll add it regardless of voting.
*********************************************************************************
Quote
Hi,
Your coin has now been added to our public voting page (https://www.mintpal.com/voting). Periodically we will select the top coin from the list and add it to the website.
Happy voting!
Regards,
Jay
MintPal
Ticket Details
Ticket #: NNNNNN
Subject: Jackpot Coin
Department: Coin Suggestions
Status: Open
Priority: Medium
Your coin has now been added to our public voting page (https://www.mintpal.com/voting). Periodically we will select the top coin from the list and add it to the website.
Happy voting!
Regards,
Jay
MintPal
Ticket Details
Ticket #: NNNNNN
Subject: Jackpot Coin
Department: Coin Suggestions
Status: Open
Priority: Medium
b.t.w. If the volume goes up enough they'll add it regardless of voting.
what volume?
I just received a message form Mintpal:
*********************************************************************************
b.t.w. If the volume goes up enough they'll add it regardless of voting.
*********************************************************************************
Quote
Hi,
Your coin has now been added to our public voting page (https://www.mintpal.com/voting). Periodically we will select the top coin from the list and add it to the website.
Happy voting!
Regards,
Jay
MintPal
Ticket Details
Ticket #: NNNNNN
Subject: Jackpot Coin
Department: Coin Suggestions
Status: Open
Priority: Medium
Your coin has now been added to our public voting page (https://www.mintpal.com/voting). Periodically we will select the top coin from the list and add it to the website.
Happy voting!
Regards,
Jay
MintPal
Ticket Details
Ticket #: NNNNNN
Subject: Jackpot Coin
Department: Coin Suggestions
Status: Open
Priority: Medium
b.t.w. If the volume goes up enough they'll add it regardless of voting.
JackpotCoin has just been added to Mintpal's public voting page so
VOTE!
https://www.mintpal.com/voting
5 votes per hour!
VOTE!
https://www.mintpal.com/voting
5 votes per hour!
cool.
im voting like crazy now.
JackpotCoin has just been added to Mintpal's public voting page so
VOTE!
VOTE!
Voted.
Jump to: