Author

Topic: [ANN][JPC]MAKE JACKPOTCOIN GREAT AGAIN! - page 308. (Read 470275 times)

legendary
Activity: 1540
Merit: 1011
FUD Philanthropist™
@Criss
Dual graphics on Notebook(HP). Possible Solution
http://www.insanelymac.com/forum/topic/285836-dual-graphics-on-notebookhp-possible-solution/
the OP on that said..

Quote
So I read a lot of threads about it, and every thread ended like there is no solution, until you can disable your onboard graphics"."

and he also said..

Quote
Does anyone know, which settings I need to change?
For example Primary Display. It's on SG (Switchable Graphics), but can be put on PEG, PCI, Auto.

my mobo has some kind of "Virtu tech" eh and i bet it would screw with sgminer..
It works by setting it on in the bios and then you have you have a special driver installed that work as a driver filter..
which means the filter is loaded and not the original Intel and AMD drivers they are loaded used on the fly based on the filters criteria..
and your notebook sounds like it employes a similar kind of system based on what it does and what mine does eh. (i never used mine at all once)

all i know is it's crazy if you say the one version that don't work is this one and all other sgminer and cgminer versions work for you.. that would mega weird for sure !
legendary
Activity: 1540
Merit: 1011
FUD Philanthropist™
4. About gpu mapping... I'm asking about that almost up from the beginning XD I've tried to change it according to sgminer readme, but combination like --gpu-map 0:1, --gpu-map 0:2, --gpu-map 0:3, or --gpu-map 0:4 just don't work for me. I thought that you ppl would give me some advices according to the pic of mapping i've gaved Cheesy
6. Yea, I've tried running with "device" (-d 0) command and then "--gpu-map" but all time fails.

And one more thing came to my mind - I've read somewhere that "--no-adl" sometimes helps. It disables ATI display library used for monitoring and setting GPU parameters. You will not see GPU temp and fan speed, but sometimes it makes easier to manually map graphics cards.
Also:
Code:
-d    Select device to use, one value, range and/or comma separated (e.g. 0-2,4) default: all
Is your 6770m really device 0? Have you tried another values?

Edit: I would also try to play with
Code:
--gpu-reorder       Attempt to reorder GPU devices according to PCI Bus ID


Yeah that is good suggestion too..

@Criss
gotta get the noob stuff out of the way when you try and help someone online right Wink lol
we ALL make little noob mistakes occasionally so it never hurts to hammer home the dumb stuff AND i always gear my replies towards the public reading eh.
you did have a Newbie tag here with activity of 2 Wink

Soo try what zuludrag suggested for sure and there is all kinds of advanced cgminer commands you can try if you dig around online for cgminer problems.
Not sure what to suggest really..
i don't think you we're using the gpu map function properly though i suggested something like this..  --gpu-map 2:1,1:2
and you said this..
Quote
but combination like --gpu-map 0:1, --gpu-map 0:2, --gpu-map 0:3, or --gpu-map 0:4 just don't work for me.
Or was i using it wrong ? LOL ..i copied the command from the cgminer Readme doc's example on it eh
may try specify the device specificaly too
such as this.. sgminer.exe --gpu-platform 2 --device 0

comparing my device list and your picture i don't see you have device 0 assigned eh
maybe run your device list command -n @pause on some other working sgminer install then on the problem one compare the difference ?
If you want i can show what my device listing looks like.. i'll upload a screen cap if it helps you at all.. it's weird other sgminers would work for you and not this one.
hell maybe pack up your sgminer install in an archive and upload it somewhere and i will hex compare your install and see if it matches mine exactly.

edit:
here is my devices listing..
Notice how mine says GPU 0 assigned: and yours does not ?


member
Activity: 97
Merit: 10
So 7 days has passed without the super jackpot-block appearing.

Oh, how about a richlist on JPC? Would add some excitement... Smiley

What I am wondering about is how a user by the name of Bussty is finding so many blocks on miningpoolhub when he's not even in the top 15?! He know a secret way or is the pool just reporting him as anonymous on the list but not in the block finder list?  Weird.

Which Top 15? How can I access the richlist?
sr. member
Activity: 343
Merit: 250
New pool for JackpotCoin



MineP.it JackpotCoin Pool

Register now, if you haven't already done so, and prepare your workers get mining!

Stratum connection example:
stratum+tcp://jpc.minep.it:3366 -u MinepitUsername.anything -p anything

MinePit Pools
  • Rock solid security and stability
  • One registration to access all our pools
  • Auto payouts every minute
  • 24/7 on-site IRC chat
  • Super fast, powerful, scale-able servers
  • Unbeatable DDOS protection
  • Unique, custom interface and back-end infrastructure
  • Super fast compile times - we aim to be one of the first pools running at every launch

Sign up now!



thanks for your support. OP updated!
full member
Activity: 182
Merit: 100
New pool for JackpotCoin



MineP.it JackpotCoin Pool

Register now, if you haven't already done so, and prepare your workers get mining!

Stratum connection example:
stratum+tcp://jpc.minep.it:3366 -u MinepitUsername.anything -p anything

MinePit Pools
  • Rock solid security and stability
  • One registration to access all our pools
  • Auto payouts every minute
  • 24/7 on-site IRC chat
  • Super fast, powerful, scale-able servers
  • Unbeatable DDOS protection
  • Unique, custom interface and back-end infrastructure
  • Super fast compile times - we aim to be one of the first pools running at every launch

Sign up now!

sr. member
Activity: 307
Merit: 250
Anyone else getting faster hashrate with HD6970 GPUs over R9 280X??

My 280x gpus hash at 2.2MH/s and the 6970s hash at 3.2MH/s!!
WTF,really?

Yea lol.
I have tried many settings and nothing seems to make a difference on the 280s.

I am using Powercolor PCS+ 6970 GPUs.
member
Activity: 81
Merit: 10
JACKPOT RANDOMNESS GRAPHICAL EXPLAINATION

Random Number Distribution for 6 days

For jackpot, at each pow we generate a random number from 1-25200, if the number is between 15001 and 15010 (inclusive), then the pow will hit the jackpot.
This is 10/25200 = 1/2520 chance, which corresponds to 1 in 3.5 days on average (720 x 3.5 = 2520)

This graph shows the generated random number distribution since launch


Random Number with Jackpot Zone

The colored area is the jackpot zone, if the random number is inside this area, it triggers the Jackpot. As you can see, it hasn't happened so far (at the time of this writing). If nobody gets the prize, this zone will be expanded till somebody hits the jackpot.

This graph shows the Jackpot zone detail



From now on the Jackpot zone in second graph is going to widen so the probability for the Jackpot to be hit is increasing.

Any chance you could tell us how often and by how much the "hit zone" is increasing?


And Bussty is usually the 38th - 42nd biggest contributor for each round.
sr. member
Activity: 476
Merit: 250
A better question would be how the guys doing 350 MH/s are NOT finding any blocks, but they are sure reaping the rewards.

I assumed they were finding them but it lists them as anonymous.  The round information doesn't work and I haven't looked into it much, so I'm just guessing on that.

If he does have a low hash rate and is finding that many blocks then either he's running something custom, or the pool isn't working that well for the others for some reason.
member
Activity: 81
Merit: 10
Any idea what kind of hashrates the other pools are getting?  I'm showing mininpoolhub around 2.4 GH/s.
sr. member
Activity: 343
Merit: 250
JACKPOT RANDOMNESS GRAPHICAL EXPLAINATION

Random Number Distribution for 6 days

For jackpot, at each pow we generate a random number from 1-25200, if the number is between 15001 and 15010 (inclusive), then the pow will hit the jackpot.
This is 10/25200 = 1/2520 chance, which corresponds to 1 in 3.5 days on average (720 x 3.5 = 2520)

This graph shows the generated random number distribution since launch


Random Number with Jackpot Zone

The colored area is the jackpot zone, if the random number is inside this area, it triggers the Jackpot. As you can see, it hasn't happened so far (at the time of this writing). If nobody gets the prize, this zone will be expanded till somebody hits the jackpot.

This graph shows the Jackpot zone detail



From now on the Jackpot zone in second graph is going to widen so the probability for the Jackpot to be hit is increasing.
member
Activity: 81
Merit: 10
A better question would be how the guys doing 350 MH/s are NOT finding any blocks, but they are sure reaping the rewards.
sr. member
Activity: 476
Merit: 250
So 7 days has passed without the super jackpot-block appearing.

Can anyone say what the odds are for that happening? Can anyone do the mathematical calculations and predict the chances?
I would like to know if we can expect this scenario between every super block. I also wonder if something could be wrong...
This is the very first Jackpot right? I hope it will be possible to determine something about the winner, I guess maybe that can be seen on the blockchain. Of this, I know nothing...

Oh, how about a richlist on JPC? Would add some excitement... Smiley

I was thinking maybe there was something wrong as well, but I'm going to assume for now it's just really unlucky.

What I am wondering about is how a user by the name of Bussty is finding so many blocks on miningpoolhub when he's not even in the top 15?! He know a secret way or is the pool just reporting him as anonymous on the list but not in the block finder list?  Weird.
member
Activity: 81
Merit: 10
Once I hit the jackpot with my single 750TI I'll come back and crow about it  Grin
member
Activity: 97
Merit: 10
So 7 days has passed without the super jackpot-block appearing.

Can anyone say what the odds are for that happening? Can anyone do the mathematical calculations and predict the chances?
I would like to know if we can expect this scenario between every super block. I also wonder if something could be wrong...
This is the very first Jackpot right? I hope it will be possible to determine something about the winner, I guess maybe that can be seen on the blockchain. Of this, I know nothing...

Oh, how about a richlist on JPC? Would add some excitement... Smiley
member
Activity: 97
Merit: 10
Can someone explain to me how this "interest" thing works.

- PoS daily interest payout initially at 0.1% per day (equivalent to 44% annual interest rate), gradually dropping down to 0.01% per day (equivalent to 3.7% annual rate), the decrease will be over a period of 5 years (rate adjusted each 3 months). Then it will stay at this rate.
(from the OP)
legendary
Activity: 1400
Merit: 1050
Can someone explain to me how this "interest" thing works.

So I have mined a bunch of blocks and received the 90-100k reward and I get those 0.1% amounts... for how long? and when/why are they actually paid out?

Thanks.
for ever, it will never end aaaaaaahhhhhhhhhhhh !!!  Grin
sr. member
Activity: 392
Merit: 250
Anyone else getting faster hashrate with HD6970 GPUs over R9 280X??

My 280x gpus hash at 2.2MH/s and the 6970s hash at 3.2MH/s!!
WTF,really?
sr. member
Activity: 697
Merit: 254
Can someone explain to me how this "interest" thing works.

So I have mined a bunch of blocks and received the 90-100k reward and I get those 0.1% amounts... for how long? and when/why are they actually paid out?

Thanks.
sr. member
Activity: 308
Merit: 250
Any info on hashspead with 7970 or 290x  ?
sr. member
Activity: 396
Merit: 250
I speak: LT, RU, EN
4. About gpu mapping... I'm asking about that almost up from the beginning XD I've tried to change it according to sgminer readme, but combination like --gpu-map 0:1, --gpu-map 0:2, --gpu-map 0:3, or --gpu-map 0:4 just don't work for me. I thought that you ppl would give me some advices according to the pic of mapping i've gaved Cheesy
6. Yea, I've tried running with "device" (-d 0) command and then "--gpu-map" but all time fails.

And one more thing came to my mind - I've read somewhere that "--no-adl" sometimes helps. It disables ATI display library used for monitoring and setting GPU parameters. You will not see GPU temp and fan speed, but sometimes it makes easier to manually map graphics cards.
Also:
Code:
-d    Select device to use, one value, range and/or comma separated (e.g. 0-2,4) default: all
Is your 6770m really device 0? Have you tried another values?

Edit: I would also try to play with
Code:
--gpu-reorder       Attempt to reorder GPU devices according to PCI Bus ID
Jump to: