Topic: [ANN][JPC]MAKE JACKPOTCOIN GREAT AGAIN! - page 314. (Read 470275 times)

It's working again!

something wrong with website, we're investigating...

Difficulty 66.666

That is the spirit of lottery , with one small investment you can hit the jackpot. Even with 10khs , someone could be rich. This will stimulate everybody to mine the coin.

Jackpotcoin Mining Pool Hub

http://jackpotcoin.miningpoolhub.com

Now we adjusted coin payouts when Jackpot block is found!

Block finder will get 50% of all and others will get 50% of it.
How do you think this payout?
I think it would satisfy solo miners who want big jackpot for himself alone.


We can roll back at anytime, we just want to hear from you.

Here is my settings for my 290's cards:

"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "1",
"auto-fan" : true,
"auto-gpu" : true,
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"lookup-gap" : "2",
"gpu-threads" : "1",
"gpu-engine" : "1100",
"gpu-fan" : "0-85",
"gpu-memclock" : "1500",
"gpu-powertune" : "20",
"gpu-vddc" : "0.000",
"intensity" : "20",
"shaders" : "2048",
"thread-concurrency" : "24550",
"xintensity" : "0",
"rawintensity" : "0",
"failover-switch-delay" : "60",
"no-pool-disable" : true

Gets me around 3.2-3.3 Mh/s per card.

In 6 days and 16 hours, we've generated 782 million coins.

At the average rate, it is about 4.8 million/hr and 117.3 million/day. Obviously the increased difficulty plays a factor and more coins we're generated early on. It would increase the total supply a good amount but nothing to fret over. Also, this will be the largest jackpot for the lifetime of jackpotcoin if it exceeds 90 million.


Keep in mind as well that there is a high probability that a block will be found within a pool and distributed among many people instead of one individual becoming a large bagholder.

So we have to sell everything we got , cause there will be inflation after such a big amount of money??

Someone is going to wake up with quite a nice bonus in the morning! 

jackpot will soon go to 100 millions...

I believe that is right.

I got greedy and only tried it solo mining. I wanted the JackPot.

Tried pool and no go.

is this working? I thought you should use "jackpotcoin"

you mean it is not working for pool mining?

NOTICE: Scratch mine for now. Checking something out.

DISREGARD mine for now.

I only tried it on solo not on a pool. SO this may not work

This is my exact config file. Minus my ip address. For the 7850

{
"pools" : [
   {
      "url" : "xxx.xxx.x.xxx:15372",
      "user" : "user",
      "pass" : "pass"
   },
   {
      
   },
   {
      
   }
]
,
"intensity" : "19",
"nfactor" : "6",
"worksize" : "256",
"kernel" : "ckolivas",
"lookup-gap" : "2",
"thread-concurrency" : "24000",
"shaders" : "0",
"gpu-threads" : "1",
"gpu-engine" : "1100",
"gpu-fan" : "65-80",
"gpu-memclock" : "1500",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"api-mcast-port" : "4028",
"api-port" : "4028",
 "expiry" : "10",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"no-client-reconnect" : true
}

And here is my bat

del *.bin
Color 0d
sgminer -o xxx.xxx.x.xxx:15372 -u user -p pass -d 0 -w 256 -I 19 -g 2 --lookup-gap 2 --thread-concurrency 8192
pause

Edit: Sorry for the edits. I believe anything in the config will over ride the bat file.

Can you share your settings? Thank you.

looks good

deleted bin - all ok & return 13.12 drivers

did you make sure to delete your .bin file ?
sometimes you have to delete them for settings to actually take effect..
that is why a lot of people use a delete command in a .bat file.

such as this..


or


also verify you are using 100% GPU usage.. i use a desktop sensor panel i made with Aida64
or i sometimes use EVGA Precision or even better MSI Afterburner newest beta.
if you get anything under 100% usage something is not right then such as Intensity is set too low or other misc issues..
This can show you what is going on.. http://www.techpowerup.com/gpuz/

maybe check if these windows environmental variables exist too ?


not sure that makes any difference really but people always advise using those two variables
and they usually add them into their bat file too but you can enter them in manually.. they only have to be added one time.

experiment a bit with Intensity too.. you may find it works faster with lower settings.. my card hash's faster at 18 than it does 20 for example.

scan time 1 may not be a good idea for a pool either.. i am using 4 on my miners

edit:
i get a hair under 2.2mh/s on average on a Radeon 7950 which is a slower gfx card than the Radeon 280x
so any of you running a 280 you should be hashing faster than me

edit2:
i currently use amd_catalyst_13.11_betav9.5 (or 12.6 final)
they seem to be a bit quicker than newer ones
and both of those have the same opencl .dll's inside the installer so it won't matter too much speed wise i think which you use
but i found 13.12 final whql to be slower