Pages:
Author

Topic: [ANN][LTC][Pool][PPLNS] [ Stratum ] give-me-ltc.com 1% FEE [10 block confirms!] - page 13. (Read 29991 times)

sr. member
Activity: 332
Merit: 250
I would need to see one of your config to be able to help.
hero member
Activity: 574
Merit: 500
Any Ideas why so many connection problems ?

http://www.pic-upload.de/view-18960123/pool0.gif.html

Like your pool ... nice functions.... up most of the time but the payouts always end up > 10% less than expected

I know its pplns etc but after about a week of low payouts it really starts to make you wonder

Is it just bad luck or just need more tuning ??

if its supposed to be 52 ltc a day and you end up wit anything from 39 to 42 that starts to add up



how long has that been an issue? There were some adjustments that needed to be made to the get work a week or so ago and they seem to have fixed many of the issues. I suggest you also have a look at your confg as others have had hashrate reading wrong because of their settings.

What settings are you referring to ... I have 7 rigs with a standard build of 4 x 6970's i-18 with standard clocks

What areas of the configs should i be looking at Huh
sr. member
Activity: 332
Merit: 250
Any Ideas why so many connection problems ?

http://www.pic-upload.de/view-18960123/pool0.gif.html

it looks like you are not getting work fast enough from the network. Are you using stratum if not I suggest you make the switch and see how you go.

please let me know! I will check the server logs in the meantime and make sure everything is ok on our end.
sr. member
Activity: 332
Merit: 250
Any Ideas why so many connection problems ?

http://www.pic-upload.de/view-18960123/pool0.gif.html

Like your pool ... nice functions.... up most of the time but the payouts always end up > 10% less than expected

I know its pplns etc but after about a week of low payouts it really starts to make you wonder

Is it just bad luck or just need more tuning ??

if its supposed to be 52 ltc a day and you end up wit anything from 39 to 42 that starts to add up



how long has that been an issue? There were some adjustments that needed to be made to the get work a week or so ago and they seem to have fixed many of the issues. I suggest you also have a look at your confg as others have had hashrate reading wrong because of their settings.
hero member
Activity: 574
Merit: 500
Any Ideas why so many connection problems ?

http://www.pic-upload.de/view-18960123/pool0.gif.html

Like your pool ... nice functions.... up most of the time but the payouts always end up > 10% less than expected

I know its pplns etc but after about a week of low payouts it really starts to make you wonder

Is it just bad luck or just need more tuning ??

if its supposed to be 52 ltc a day and you end up wit anything from 39 to 42 that starts to add up

sr. member
Activity: 302
Merit: 252
sr. member
Activity: 332
Merit: 250
There seems to be an issue with the auto pay.  Myself and a few others in pool chat confirmed that the threshold was reached but the auto payment didn't process.  I am not too worried about it since my auto pay limit is set to 3 LTC but wanted to put up something for the pool admins to see.  They may already know about it but wanted to put something here to make sure.

Thanks!
New

Hi there,

Automatic payout runs every hour, checking if your current balance is higher than the limit you have setup.
full member
Activity: 147
Merit: 100
Auto pay just went, so everything looks good now. 
full member
Activity: 147
Merit: 100
There seems to be an issue with the auto pay.  Myself and a few others in pool chat confirmed that the threshold was reached but the auto payment didn't process.  I am not too worried about it since my auto pay limit is set to 3 LTC but wanted to put up something for the pool admins to see.  They may already know about it but wanted to put something here to make sure.

Thanks!
New
sr. member
Activity: 332
Merit: 250
Have we ever figured out why income is either as expected or below, but never above expected like every other PPLNS pool I've been part of?  I had to take my miners away from this pool due to this inconsistancy.  And no this isn't over 24 hours.  I stayed nearly a week.  I've mined a lot of PPLNS so I understand how it works.  Even the numbers on the graphs didn't make any sense.

If you read in the news section. There was an issue with the getwork a while back where everything was slowed down causing long rounds. We have since upgraded the getwork and so far things seem to be as they should be. Still got a close eye on it.
full member
Activity: 154
Merit: 100
Have we ever figured out why income is either as expected or below, but never above expected like every other PPLNS pool I've been part of?  I had to take my miners away from this pool due to this inconsistancy.  And no this isn't over 24 hours.  I stayed nearly a week.  I've mined a lot of PPLNS so I understand how it works.  Even the numbers on the graphs didn't make any sense.
sr. member
Activity: 332
Merit: 250
I also has some issues originally using GUIminer with Reaper.  Tried a few of the different hosts including some of the donation only ones.  Still saw a larger than comfortable stale/invalid share count.  Being pretty new to the scene (LOL) I decided to check out the Stratum instructions in more detail. 

Most of this is already explained on this page
http://give-me-ltc.com/faq

But it might be worth repeating here for others who haven't found it.

1.   Download the file for Windows http://give-me-ltc.com/config-files/stratum_proxy.exe
2.   Save the files to C:\proxy\Stratum_proxy.exe
3.   Open a command prompt window (start >> run >> cmd)
4.   Browse to c:\proxy in the command prompt window
5.   Copy this command exactly and right click and select paste in the command prompt:  stratum_proxy.exe -pa scrypt -o stratum.give-me-ltc.com -p 3333
6.   Minimize the command prompt window (DO NOT CLOSE)
7.   Open GUIMiner
8.   For Host use 127.0.0.1
9.   For port use 8332
10. Enter your username and password from the give-me-ltc website for your worker(s)
11. Enter the mining settings for your card
12. Push start mining
13. Enjoy!

Thank you for that Smiley. I plan to make teh instructions more detailed and make it stand out a little more.

Got some big things coming to this pool soon Smiley
full member
Activity: 147
Merit: 100
I also has some issues originally using GUIminer with Reaper.  Tried a few of the different hosts including some of the donation only ones.  Still saw a larger than comfortable stale/invalid share count.  Being pretty new to the scene (LOL) I decided to check out the Stratum instructions in more detail. 

Most of this is already explained on this page
http://give-me-ltc.com/faq

But it might be worth repeating here for others who haven't found it.

1.   Download the file for Windows http://give-me-ltc.com/config-files/stratum_proxy.exe
2.   Save the files to C:\proxy\Stratum_proxy.exe
3.   Open a command prompt window (start >> run >> cmd)
4.   Browse to c:\proxy in the command prompt window
5.   Copy this command exactly and right click and select paste in the command prompt:  stratum_proxy.exe -pa scrypt -o stratum.give-me-ltc.com -p 3333
6.   Minimize the command prompt window (DO NOT CLOSE)
7.   Open GUIMiner
8.   For Host use 127.0.0.1
9.   For port use 8332
10. Enter your username and password from the give-me-ltc website for your worker(s)
11. Enter the mining settings for your card
12. Push start mining
13. Enjoy!
omo
full member
Activity: 147
Merit: 100
I restarted several times, and tried 443 port, the problem remains,
I'm now using 3333 port, it seems ok.
Can I use port 80/443 with stratum?
hero member
Activity: 742
Merit: 500
I was getting a lot of stales last night as well - I changed over to stratum and they went down considerably..


I need to tweak my rigs still.. they report 2mh, 2mh, and 1.2mh.. yet my workers only report a total of 4300kh on the site.. 
sr. member
Activity: 332
Merit: 250
I got  very high reject rate recently on pool-d:80 port,  
the dashboard shows a total of 8% invalid:
Code:
Paid Shares [All submitted shares from previous rounds which are already accounted and paid for.]
Valid (Paid):
161782
Invalid (not paid):
12977 (8%)

the rejects usually starts from a "LONGPOLL from pool 0 requested work restart" message,
and ends after a "New block detected on network before longpoll" message,
the following are snapshots of cgminer:
Code:
[2013-04-11 20:18:27] Accepted 034aac5a Diff 77/31 GPU 1 pool 0
 [2013-04-11 20:18:28] Accepted 039142e6 Diff 71/31 GPU 1 pool 0
 [2013-04-11 20:18:31] Accepted 0716f66b Diff 36/31 GPU 1 pool 0
 [2013-04-11 20:18:35] Accepted 0759148a Diff 34/31 GPU 1 pool 0
 [2013-04-11 20:18:39] LONGPOLL from pool 0 requested work restart
 [2013-04-11 20:18:46] Accepted 0593c3dd Diff 45/31 GPU 1 pool 0
 [2013-04-11 20:18:51] Rejected 04a8382c Diff 54/31 GPU 1 pool 0 (prevhash-stale)
 [2013-04-11 20:18:51] Rejected 05ad4425 Diff 45/31 GPU 1 pool 0 (prevhash-stale)
 [2013-04-11 20:18:53] Rejected 026331cd Diff 107/31 GPU 1 pool 0 (prevhash-stale)
 [2013-04-11 20:18:58] Rejected 034bd5e7 Diff 77/31 GPU 0 pool 0 (prevhash-stale)
 [2013-04-11 20:18:58] Rejected 05d108f3 Diff 44/31 GPU 1 pool 0 (prevhash-stale)
 [2013-04-11 20:19:00] Rejected 03ea4fd0 Diff 65/31 GPU 0 pool 0 (prevhash-stale)
 [2013-04-11 20:19:07] Rejected 0785d78c Diff 34/31 GPU 0 pool 0 (prevhash-stale)
 [2013-04-11 20:19:22] Rejected 00bb96f5 Diff 349/31 GPU 1 pool 0 (prevhash-stale)
 [2013-04-11 20:19:23] Rejected 014fbf5a Diff 195/31 GPU 0 pool 0 (prevhash-stale)
 [2013-04-11 20:19:32] Rejected 07783d41 Diff 34/31 GPU 1 pool 0 (prevhash-stale)

Code:
[2013-04-11 20:29:39] Rejected 0371198c Diff 74/31 GPU 1 pool 0 (prevhash-stale)
 [2013-04-11 20:29:44] Rejected 00da8c07 Diff 299/31 GPU 1 pool 0 (prevhash-stale)
 [2013-04-11 20:29:44] Rejected 04ab6e79 Diff 54/31 GPU 0 pool 0 (prevhash-stale)
 [2013-04-11 20:29:52] Rejected 012d18b1 Diff 217/31 GPU 0 pool 0 (prevhash-stale)
 [2013-04-11 20:29:54] Rejected 079752f1 Diff 33/31 GPU 1 pool 0 (prevhash-stale)
 [2013-04-11 20:30:00] New block detected on network before longpoll
 [2013-04-11 20:30:08] Accepted 015f145a Diff 186/31 GPU 1 pool 0
 [2013-04-11 20:30:08] Accepted 053f1af4 Diff 48/31 GPU 0 pool 0
 [2013-04-11 20:30:24] Accepted 07c8c8c7 Diff 32/31 GPU 0 pool 0
 [2013-04-11 20:30:24] Accepted 079d9c19 Diff 33/31 GPU 1 pool 0
 [2013-04-11 20:30:24] Accepted 056f8fa1 Diff 47/31 GPU 1 pool 0
 [2013-04-11 20:30:24] Accepted 00b1c3a3 Diff 368/31 GPU 0 pool 0
 [2013-04-11 20:30:25] Accepted 01ff70e4 Diff 128/31 GPU 0 pool 0
 [2013-04-11 20:30:29] Accepted 0712f396 Diff 36/31 GPU 1 pool 0
 [2013-04-11 20:30:30] Accepted 0144011c Diff 202/31 GPU 0 pool 0
 [2013-04-11 20:30:30] Accepted 0104d829 Diff 251/31 GPU 0 pool 0

You may need to restart you miner for the getwork update to take affect. Also i suggest you use stratum. If you want me to take a look at your config please email it to me.
omo
full member
Activity: 147
Merit: 100
I got  very high reject rate recently on pool-d:80 port,  
the dashboard shows a total of 8% invalid:
Code:
Paid Shares [All submitted shares from previous rounds which are already accounted and paid for.]
Valid (Paid):
161782
Invalid (not paid):
12977 (8%)

the rejects usually starts from a "LONGPOLL from pool 0 requested work restart" message,
and ends after a "New block detected on network before longpoll" message,
the following are snapshots of cgminer:
Code:
[2013-04-11 20:18:27] Accepted 034aac5a Diff 77/31 GPU 1 pool 0
 [2013-04-11 20:18:28] Accepted 039142e6 Diff 71/31 GPU 1 pool 0
 [2013-04-11 20:18:31] Accepted 0716f66b Diff 36/31 GPU 1 pool 0
 [2013-04-11 20:18:35] Accepted 0759148a Diff 34/31 GPU 1 pool 0
 [2013-04-11 20:18:39] LONGPOLL from pool 0 requested work restart
 [2013-04-11 20:18:46] Accepted 0593c3dd Diff 45/31 GPU 1 pool 0
 [2013-04-11 20:18:51] Rejected 04a8382c Diff 54/31 GPU 1 pool 0 (prevhash-stale)
 [2013-04-11 20:18:51] Rejected 05ad4425 Diff 45/31 GPU 1 pool 0 (prevhash-stale)
 [2013-04-11 20:18:53] Rejected 026331cd Diff 107/31 GPU 1 pool 0 (prevhash-stale)
 [2013-04-11 20:18:58] Rejected 034bd5e7 Diff 77/31 GPU 0 pool 0 (prevhash-stale)
 [2013-04-11 20:18:58] Rejected 05d108f3 Diff 44/31 GPU 1 pool 0 (prevhash-stale)
 [2013-04-11 20:19:00] Rejected 03ea4fd0 Diff 65/31 GPU 0 pool 0 (prevhash-stale)
 [2013-04-11 20:19:07] Rejected 0785d78c Diff 34/31 GPU 0 pool 0 (prevhash-stale)
 [2013-04-11 20:19:22] Rejected 00bb96f5 Diff 349/31 GPU 1 pool 0 (prevhash-stale)
 [2013-04-11 20:19:23] Rejected 014fbf5a Diff 195/31 GPU 0 pool 0 (prevhash-stale)
 [2013-04-11 20:19:32] Rejected 07783d41 Diff 34/31 GPU 1 pool 0 (prevhash-stale)

Code:
[2013-04-11 20:29:39] Rejected 0371198c Diff 74/31 GPU 1 pool 0 (prevhash-stale)
 [2013-04-11 20:29:44] Rejected 00da8c07 Diff 299/31 GPU 1 pool 0 (prevhash-stale)
 [2013-04-11 20:29:44] Rejected 04ab6e79 Diff 54/31 GPU 0 pool 0 (prevhash-stale)
 [2013-04-11 20:29:52] Rejected 012d18b1 Diff 217/31 GPU 0 pool 0 (prevhash-stale)
 [2013-04-11 20:29:54] Rejected 079752f1 Diff 33/31 GPU 1 pool 0 (prevhash-stale)
 [2013-04-11 20:30:00] New block detected on network before longpoll
 [2013-04-11 20:30:08] Accepted 015f145a Diff 186/31 GPU 1 pool 0
 [2013-04-11 20:30:08] Accepted 053f1af4 Diff 48/31 GPU 0 pool 0
 [2013-04-11 20:30:24] Accepted 07c8c8c7 Diff 32/31 GPU 0 pool 0
 [2013-04-11 20:30:24] Accepted 079d9c19 Diff 33/31 GPU 1 pool 0
 [2013-04-11 20:30:24] Accepted 056f8fa1 Diff 47/31 GPU 1 pool 0
 [2013-04-11 20:30:24] Accepted 00b1c3a3 Diff 368/31 GPU 0 pool 0
 [2013-04-11 20:30:25] Accepted 01ff70e4 Diff 128/31 GPU 0 pool 0
 [2013-04-11 20:30:29] Accepted 0712f396 Diff 36/31 GPU 1 pool 0
 [2013-04-11 20:30:30] Accepted 0144011c Diff 202/31 GPU 0 pool 0
 [2013-04-11 20:30:30] Accepted 0104d829 Diff 251/31 GPU 0 pool 0
full member
Activity: 147
Merit: 100
This may help explain as well:

https://bitcointalksearch.org/topic/pplns-39832

I joined this pool last night and trying to decide if it is a good one to stick with, so I was reading up on this payment style as well.  I guess I need to give it 2-5 days to really get a feel for how it works and the kind of payout I can expect.  Website is certainly well done and so far I am liking it...
newbie
Activity: 37
Merit: 0
Ok that makes sense Serraz, I have been in and out a bit as I get the computers setup and optimised.
Now one just went offline while I am at work...I knew I should have restarted it last night!
--> Edit: logmein.com to the rescue...computer crashed and I was able to hit it with a wake-on-lan and get it working again. yay!
sr. member
Activity: 332
Merit: 250
Hey Mate,

I also live in Australia. I recommend using the US Stratum server as i seem to get the best connection from that as well as other Australian users.

PPLNS can vary on luck. If you do think there is a problem with the estimate i will defiantly take a look at it for you.

Cool, I switched back to stratum+tcp://stratum.give-me-ltc.com:3333 from the US Donor server.

If luck is in there that might be the problem.
I finally have the two computers fully set up and running since last night so will run for 24 hours and see how it comes out.

You cannot make a comparison on PPLNS with 24 hours. There is a more detailed description on how the PPLNS system works over at http://give-me-ltc.com/faq.

Thanks
Pages:
Jump to: