Pages:
Author

Topic: [ANN][MAG] MAGNET - GOES STELLAR - More in description / magnetwork.io - page 77. (Read 83023 times)

full member
Activity: 392
Merit: 101
Hi guys, recently I update my wallet (download the new version). Now I'm receiving new address with 0 balance, I tried to replace the (dot)dat file but it still generating new wallet & 0 balance, how can I get my old wallet? Mind to teach me. Thanks

You may want to import the wallet from your backup. I don't remember the option correctly since my wallet is not in front of me but File Menu -> Open wallet. Then select the file you backed up earlier.

There's no option for "IMPORT" wallet, I tried manually replace the file in folder, ended up the same.

Yeah there is no option. Generally all the wallets have it. Did you name your backup wallet.dat and put it in Appdata/Roaming folder?
member
Activity: 108
Merit: 10
Hi guys, recently I update my wallet (download the new version). Now I'm receiving new address with 0 balance, I tried to replace the (dot)dat file but it still generating new wallet & 0 balance, how can I get my old wallet? Mind to teach me. Thanks

You may want to import the wallet from your backup. I don't remember the option correctly since my wallet is not in front of me but File Menu -> Open wallet. Then select the file you backed up earlier.

There's no option for "IMPORT" wallet, I tried manually replace the file in folder, ended up the same.
full member
Activity: 392
Merit: 101
Hi guys, recently I update my wallet (download the new version). Now I'm receiving new address with 0 balance, I tried to replace the (dot)dat file but it still generating new wallet & 0 balance, how can I get my old wallet? Mind to teach me. Thanks

You may want to import the wallet from your backup. I don't remember the option correctly since my wallet is not in front of me but File Menu -> Open wallet. Then select the file you backed up earlier.
member
Activity: 108
Merit: 10
Hi guys, recently I update my wallet (download the new version). Now I'm receiving new address with 0 balance, I tried to replace the (dot)dat file but it still generating new wallet & 0 balance, how can I get my old wallet? Mind to teach me. Thanks
newbie
Activity: 1
Merit: 0
How to set manternode ? if not shown TxHash* and Output index*
Where to get them ? In the console after the command masternode "outputs" appears empty string } { everything ! Checked on 2 computers ! This is a bug of the purse ?
member
Activity: 436
Merit: 10
Proof-of-Stake Blockchain Network
Guys! And how many with 1 Node per day dripping coins?)))Please tell me.And is it worth to invest? Huh
member
Activity: 121
Merit: 15
I have more than 10 different wallets on my machine and this is the only one Windows defender is blocking.

That's what I'm talking about.



Any thoughts on this?
Thats would certainly not be the first wallet that triggers warning - much honestly. This is pretty much a common place in the crypto world.

Besides, full source is also available and provided. Building from source is encouraged. And if you need assistance doing that, head over to the slack where devs are happy to help.
full member
Activity: 174
Merit: 100
I have more than 10 different wallets on my machine and this is the only one Windows defender is blocking.

That's what I'm talking about.



Any thoughts on this?
full member
Activity: 392
Merit: 101
I have more than 10 different wallets on my machine and this is the only one Windows defender is blocking.
full member
Activity: 294
Merit: 100
40 hours no block?

Join here : miningpool.shop , at least 20 block an hour. Cheesy
full member
Activity: 174
Merit: 100
40 hours no block?
sr. member
Activity: 422
Merit: 250
What is the discrepancy b/w the 100 MN payouts and the lower random amounts?

For example. I was doing 500-600 per day, and then today I have had only one 100 block, and the rest have been dust. Just trying to figure out why you sometimes get large rewards, and other times you get dust rewards.
Hi Dev,

I am currently running 8 MNs in separate windows VPS. About 12 hours ago, I restarted all my MNs since they stopped receiving rewards after I withdrew some tokens but kept  balances above 10K. Ialso took your advice and added masternodesoftlock=1 to my configs. However since then, all but 1 MN has received MN rewards ( 100 tokens ).  It has received staking rewards several times but not masternode rewards. Should I renew the privatekey and restart? Or just let it run for 24 hours?
To clarify, Masternodes earn 50% of all mining rewards, that includes both PoS and PoW.

PoW are currently at 200 Mag. 100 Mag goes to masternode winner each block. PoS would vary depending on staking which is computed in coin-day units x 7% / 365. So basically at the moment these PoS rewards are quite low but could later on earn more than PoW blocks when wallets are staking more coins. (a 5-day old 100K stash would reward as much as a PoW block).

Since the network is pretty new, staking occurs with small amounts and these are the rewards you get. When your MN is selected as winner you have a 50/50 chance to be rewarded with PoW or PoS. Both types would reset your rank.

Hope this clarifies.


Thanks for the clarification, but I think I found the problem with that one masternode.  Running the command "masternode status" shows it with status 2, all my other masternodes show status 1. When re-issued  masternode start, it changed status to 1. Now the question is, what causes it change to status 2?
full member
Activity: 123
Merit: 100
Is there a discord group setup for Mag yet? I have only seen the Slack channel listed, or did I miss it?
full member
Activity: 123
Merit: 100

To clarify, Masternodes earn 50% of all mining rewards, that includes both PoS and PoW.

PoW are currently at 200 Mag. 100 Mag goes to masternode winner each block. PoS would vary depending on staking which is computed in coin-day units x 7% / 365. So basically at the moment these PoS rewards are quite low but could later on earn more than PoW blocks when wallets are staking more coins. (a 5-day old 100K stash would reward as much as a PoW block).

Since the network is pretty new, staking occurs with small amounts and these are the rewards you get. When your MN is selected as winner you have a 50/50 chance to be rewarded with PoW or PoS. Both types would reset your rank.

Hope this clarifies.

Yeah, it does. Appreciate the information.
member
Activity: 121
Merit: 15


NEW WALLET 1.2.1 UPDATE

Masternode owners now have the ability to “soft” lock the masternode collateral. When the option is turned on, the wallet will not select masternode transaction as input to new transactions. This behavior can be overridden by using the Coin Control Features and explicitly selecting the collateral. Simply add the following line to your config file to use: masternodesoftlock=1
The GUI was incorrectly reporting “Not in the masternode list” while syncing to the Magnet Network (this can be a slow process as the network is still small). The message has been updated to report the appropriate reason. Additionally, in case of actual failure to start a masternode, the error message will be displayed in the list.
As usual don’t hesitate to reach out on Slack for faster assistance.
Enjoy!


Source Code
GitHub


member
Activity: 121
Merit: 15
What is the discrepancy b/w the 100 MN payouts and the lower random amounts?

For example. I was doing 500-600 per day, and then today I have had only one 100 block, and the rest have been dust. Just trying to figure out why you sometimes get large rewards, and other times you get dust rewards.
Hi Dev,

I am currently running 8 MNs in separate windows VPS. About 12 hours ago, I restarted all my MNs since they stopped receiving rewards after I withdrew some tokens but kept  balances above 10K. Ialso took your advice and added masternodesoftlock=1 to my configs. However since then, all but 1 MN has received MN rewards ( 100 tokens ).  It has received staking rewards several times but not masternode rewards. Should I renew the privatekey and restart? Or just let it run for 24 hours?
To clarify, Masternodes earn 50% of all mining rewards, that includes both PoS and PoW.

PoW are currently at 200 Mag. 100 Mag goes to masternode winner each block. PoS would vary depending on staking which is computed in coin-day units x 7% / 365. So basically at the moment these PoS rewards are quite low but could later on earn more than PoW blocks when wallets are staking more coins. (a 5-day old 100K stash would reward as much as a PoW block).

Since the network is pretty new, staking occurs with small amounts and these are the rewards you get. When your MN is selected as winner you have a 50/50 chance to be rewarded with PoW or PoS. Both types would reset your rank.

Hope this clarifies.
member
Activity: 121
Merit: 15
Hi anyone can give manual for masternode implementation? Or other coin masternode manual that using the same step so I can follow to install the magnet masternode in Linux VPS

I would also like to know
The official documentation is coming along with the release of website and other documentation
In the meantime this current unofficial draft should get you started:
https://drive.google.com/open?id=1B4eTYoSsSXLCOiRd6K8u07UIpaosIisq
Hi I have followed the guide  until  command ./magnetd
root@iZt4ng0muborkfii5j8zjeZ:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared object file: No such file or directory

Can Anyone help me, What should I do?
What linux distrib are you running? You can check your system libs:
locate libboost_system.so
full member
Activity: 123
Merit: 100
What is the discrepancy b/w the 100 MN payouts and the lower random amounts?

For example. I was doing 500-600 per day, and then today I have had only one 100 block, and the rest have been dust. Just trying to figure out why you sometimes get large rewards, and other times you get dust rewards.
member
Activity: 117
Merit: 10
Hi anyone can give manual for masternode implementation? Or other coin masternode manual that using the same step so I can follow to install the magnet masternode in Linux VPS

I would also like to know
The official documentation is coming along with the release of website and other documentation
In the meantime this current unofficial draft should get you started:
https://drive.google.com/open?id=1B4eTYoSsSXLCOiRd6K8u07UIpaosIisq
Hi I have followed the guide  until  command ./magnetd
root@iZt4ng0muborkfii5j8zjeZ:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared object file: No such file or directory

Can Anyone help me, What should I do?
Pages:
Jump to: