Topic: [ANN][MUN] Muniti: First touristic cryptocurrency - X11, D2D - Multi-algo soon - page 47. (Read 120470 times)
March 31, 2014, 03:53:13 PM
Be warned, minep.it/pool/mun/ is not functioning properly.
March 31, 2014, 03:30:33 PM
use a proper miner for X11 algo
March 31, 2014, 03:26:23 PM
March 31, 2014, 03:20:31 PM
Would you like to have your coin listed on www.crycurex.com ?
One of the lowest trade fees - 0.09 % per trade
https://crycurex.com/info/add-currency/
One of the lowest trade fees - 0.09 % per trade
https://crycurex.com/info/add-currency/
March 31, 2014, 03:19:40 PM
Thanks to dev and suprnova for a great launch. Looking forward to Muniti's future.
March 31, 2014, 02:50:54 PM
Right, thanks for the tip and helping out a real n00b :-) is it worth cpu mining when there's already gpu ?
So I assume i should join a pool and figure out how to use xcoin miners. right?
Any suggestions what to read or which pool to join to best learn cpu mining?
I really appreciate your help btw, this crypto world is the wild west :-)
I'm using a computer with nothing on it just to do the mining, and I only installed the software listed here so far, but yes, virus scans too.
Thanks again.
You are welcome but i have to go now.
Just try reading the get started info of a few pools. Any pool. Sometimes you find links you can follow.
And if you find one with an IRC chatt then the best you can do is to go in there say you are new and ask for some help. That's what this chatts are good for.
March 31, 2014, 02:46:34 PM
Thanks for the advice, I will need to investigate this further.. just wondering .. for this coin, is it worth cpu mining if theres gpu mining available?
A standard R290x does 2.5Mhash on X11
My 6 core i7 CPU with 10 threads runs at 670kHash
It's ok but you can't get a lot with a CPU the GPU has a clear advantage here.
Unfortunatly there are hardly any CPU only coins anymore so you don't have much alternative.
I have a 280X and that's about what I'm getting too. This guy says he has a 290X not sure if you missed that.
I have the Gigabyte 280x "Windforce" Rev 2 (with the black board) and they get about 715 Khash on scrypt.
I spent a couple months finding good settings for these, and I find they are best with
Engine - 1013 exactly, Memory - 1499 or 1500 not 1 more than 1500, and usually I 13, and I use powertune -25% with my modded bios, you could use -20%. Hope it helps someone!
March 31, 2014, 02:43:52 PM
Any pools wishing to open up a Muniti pool, please feel free to contact me. Well done and thanks to all those pool operators who managed to get their pool working rapidly, seeing as how I sent the source-code to them at 19:59:50. Special thanks to ocminer who was the fastest of them all and the last one to receive the source code. Happy mining everyone! Time for us to move on to the next steps.
Thanks for the great launch folks, finally a fun launch again :-)
I always start pools with 0% as you never know if everything goes straight or if problems arise.
I'll let it run at 0% for the next 24h and bump it up to the standard 1% fee then.
Of course please spread the hash also to the other pools and message me or post here when problems arise.
Thanks & Happy Mining !
oc (https://mun.suprnova.cc)
March 31, 2014, 02:42:08 PM
Quote
But more importand. Be very carefully what you download and execute. It's really extremly dangerous in the crypto world. You can not trust anyone.
Always check the wallets with: https://www.virustotal.com
Always check the wallets with: https://www.virustotal.com
Thats a good and a bad advice for a total newbie
No matter which miner he's going to scans, virustotal will find at least 5 false positives. So every miner looks dangerous.
Just make sure to download the miner from the official announce threads / official posts. Those should be safe.
thats why i spoke about wallets only
March 31, 2014, 02:41:17 PM
I was told by someone else here, I will need to create a batch file with some details and execute that.
I have never installed a miner before so I got no idea what I'm doing :-) .. but I really want to mine this coin for some reason.
Anyway, thanks for the link, I downloaded and ran miners-bdver1 .. assuming thats the right one, but I get an error when i run it.
HTTP failed: Failed connect to 127.0.0.1:9332; No error and then
json_rpc_call failed, retry after 30 seconds.
Will creating that batch file in the same folder as the miner executable fix this?
Thanks again
You can't just execute the exe. You have to pass parameter to that exe to what pool you want to connect and that's what you do with the .bat file.
127.0.0.1 is your local IP or in simpler words your own PC. This you can only use if you solo mine (you have to start the wallte before and create a config for it) which is already impossible to do. You will never find a block.
My advice check out some pools some have good GetStarted helps.
But more importand. Be very carefully what you download and execute. It's really extremly dangerous in the crypto world. You can not trust anyone.
Always check the wallets with: https://www.virustotal.com
Right, thanks for the tip and helping out a real n00b :-) is it worth cpu mining when there's already gpu ?
So I assume i should join a pool and figure out how to use xcoin miners. right?
Any suggestions what to read or which pool to join to best learn cpu mining?
I really appreciate your help btw, this crypto world is the wild west :-)
I'm using a computer with nothing on it just to do the mining, and I only installed the software listed here so far, but yes, virus scans too.
Thanks again.
March 31, 2014, 02:41:12 PM
Pool working great
I'm getting 0% rejects which is nice to see that I got my miners figured out for once hehe. By the way, I set a 5% donation for making a shitty comment to ya yesterday sorry 'bout that, was mad at the world during that CWC launch yesterday. March 31, 2014, 02:38:16 PM
Quote
But more importand. Be very carefully what you download and execute. It's really extremly dangerous in the crypto world. You can not trust anyone.
Always check the wallets with: https://www.virustotal.com
Always check the wallets with: https://www.virustotal.com
Thats a good and a bad advice for a total newbie
No matter which miner he's going to scans, virustotal will find at least 5 false positives. So every miner looks dangerous.
Just make sure to download the miner from the official announce threads / official posts. Those should be safe.
March 31, 2014, 02:38:16 PM
Thanks for the advice, I will need to investigate this further.. just wondering .. for this coin, is it worth cpu mining if theres gpu mining available?
A standard R290x does 2.5Mhash on X11
My 6 core i7 CPU with 10 threads runs at 670kHash
It's ok but you can't get a lot with a CPU the GPU has a clear advantage here.
Unfortunatly there are hardly any CPU only coins anymore so you don't have much alternative.
I have a 280X and that's about what I'm getting too. This guy says he has a 290X not sure if you missed that.
March 31, 2014, 02:37:27 PM
Thanks for the advice, I will need to investigate this further.. just wondering .. for this coin, is it worth cpu mining if theres gpu mining available?
A standard R290x does 2.5Mhash on X11
My 6 core i7 CPU with 10 threads runs at 670kHash
It's ok but you can't get a lot with a CPU the GPU has a clear advantage here.
Unfortunatly there are hardly any CPU only coins anymore so you don't have much alternative.
March 31, 2014, 02:33:27 PM
Thanks for the advice, I will need to investigate this further.. just wondering .. for this coin, is it worth cpu mining if theres gpu mining available?
A standard R290x does 2.5Mhash on X11
My 6 core i7 CPU with 10 threads runs at 670kHash
It's ok but you can't get a lot with a CPU the GPU has a clear advantage here.
Unfortunatly there are hardly any CPU only coins anymore so you don't have much alternative.
March 31, 2014, 02:32:42 PM
Your mine does not work!!!
Apologies for that - we had some issues in the beginning but it should all be working correctly now.
March 31, 2014, 02:32:27 PM
Runing a little late, but http://benchcryptopools.myvnc.com/muniti/public/ is up and running, sorry for delay
March 31, 2014, 02:27:51 PM
I was told by someone else here, I will need to create a batch file with some details and execute that.
I have never installed a miner before so I got no idea what I'm doing :-) .. but I really want to mine this coin for some reason.
Anyway, thanks for the link, I downloaded and ran miners-bdver1 .. assuming thats the right one, but I get an error when i run it.
HTTP failed: Failed connect to 127.0.0.1:9332; No error and then
json_rpc_call failed, retry after 30 seconds.
Will creating that batch file in the same folder as the miner executable fix this?
Thanks again
You can't just execute the exe. You have to pass parameter to that exe to what pool you want to connect and that's what you do with the .bat file.
127.0.0.1 is your local IP or in simpler words your own PC. This you can only use if you solo mine (you have to start the wallte before and create a config for it) which is already impossible to do. You will never find a block.
My advice check out some pools some have good GetStarted helps.
But more importand. Be very carefully what you download and execute. It's really extremly dangerous in the crypto world. You can not trust anyone.
Always check the wallets with: https://www.virustotal.com
March 31, 2014, 02:26:13 PM
good launch!congrats
Jump to: