[ANN]PiCoin [POS+POW] [SIGNATURE CAMPAIGN] - page 91.

picoindev

full member

Activity: 140

Merit: 100

Quote from: Lopchi on March 28, 2017, 05:23:44 AM

Hey dev, i have checked the shareholders list and my shares has been changed from 7,58 to 7,04 and i am not the only one. Some others ranked Member are getting 7,04 too now, as much as a Jr.Member. Am i missing something?

Thank you for this, i will inform picoinsupport so he can check it. We have been doing some rework on the spreadsheet yesterday, maybe we took a wrong collumn.
So far we have collected about 70% of the users PI addresses.
Yesterday i was working on an automatic payout systeem, but this will need some more time. First payouts will be done by hand.

OGBabeh

newbie

Activity: 21

Merit: 0

All this talk of dodgy crypto exchanges made me look up what happened to cryptsy ...

Big Vern ... what a dick ... I knew there was something suss going on ... I only lost a couple hundred bucks, but was enough to turn me off everything crypto for a couple of years. Most of the alts I had there were dead by the time the site popped back up with its share scheme ...

Moral - if you love your coin, don't list it on a dodgy exchange.

Lopchi

full member

Activity: 207

Merit: 100

Hey dev, i have checked the shareholders list and my shares has been changed from 7,58 to 7,04 and i am not the only one. Some others ranked Member are getting 7,04 too now, as much as a Jr.Member. Am i missing something?

supersnips

member

Activity: 91

Merit: 10

https://www.cryptopia.co.nz/Paytopia

cryptopia is a option to add, costs a little but adds an exchange.

hoop

legendary

Activity: 1524

Merit: 1001

NOBT - WNOBT your saving bank◕◡◕

Quote from: rotzbouf on March 27, 2017, 01:42:19 PM

Quote from: l8nit3 on March 27, 2017, 11:02:06 AM

Quote from: picoindev on March 27, 2017, 10:14:26 AM

General update:
Please send "addcoin" request to yobit here: https://yobit.net/en/addcoin/

Just my personal opinion, but with a good coin, good graphics, and small but solid community.... do we really wanna list at yobit/yosh*t exchange? My two sats worth would be wait for a more reputable exchange, and simply concentrate on the great coin

Totally agree, some other devs have big issues getting yobit updating their wallets, unavailable withdrawls, no resppond to support requests...
Would also wait until coin is ready for more reputable exchange. Yobit could kill it before it can develop its potential.

I agree on your thoughts guys, we won't listed at yobt at all it is not reputable exchanges any more. better go to cryptopia and similar reputable exchanges .

lupanar

sr. member

Activity: 1344

Merit: 252

Quote from: Anon11073 on March 27, 2017, 11:31:05 PM

Quote from: lupanar on March 27, 2017, 09:18:52 PM

Quote from: Anon11073 on March 27, 2017, 08:57:21 PM

Quote from: lupanar on March 27, 2017, 08:44:37 PM

Who's that "unknown" guy on pi.8pool that having block rewards with NO Actual Shares??? It's a chiter or what???

Also. Let's wait for correction ...
More than that, I do not receive account lock email... Sad

So that is you are cheater?) And what with your stats on pool? It looks a cheat a bit...

No, I think my hash rate is normal.
I am using Tesla P100 + R9 380. I do not use ASIC.

Think, it's some kind of issue with incorrect stats of some miners.

Anon11073

sr. member

Activity: 896

Merit: 289

Twitter: @BTY_11073

Quote from: lupanar on March 27, 2017, 09:18:52 PM

Quote from: Anon11073 on March 27, 2017, 08:57:21 PM

Quote from: lupanar on March 27, 2017, 08:44:37 PM

Who's that "unknown" guy on pi.8pool that having block rewards with NO Actual Shares??? It's a chiter or what???

Also. Let's wait for correction ...
More than that, I do not receive account lock email... Sad

So that is you are cheater?) And what with your stats on pool? It looks a cheat a bit...

No, I think my hash rate is normal.
I am using Tesla P100 + R9 380. I do not use ASIC.

lupanar

sr. member

Activity: 1344

Merit: 252

Quote from: Anon11073 on March 27, 2017, 08:57:21 PM

Quote from: lupanar on March 27, 2017, 08:44:37 PM

Who's that "unknown" guy on pi.8pool that having block rewards with NO Actual Shares??? It's a chiter or what???

Also. Let's wait for correction ...
More than that, I do not receive account lock email... Sad

So that is you are cheater?) And what with your stats on pool? It looks a cheat a bit...

l8nit3

legendary

Activity: 1007

Merit: 1000

Quote from: Anon11073 on March 27, 2017, 08:57:21 PM

Quote from: lupanar on March 27, 2017, 08:44:37 PM

Who's that "unknown" guy on pi.8pool that having block rewards with NO Actual Shares??? It's a chiter or what???

Also. Let's wait for correction ...
More than that, I do not receive account lock email... Sad

L8nit3-Miners is up and mining

you can watch payouts and blocks found in real time here Pool Wallet On Block Explorer
No login, no email needed, mine straight to your wallet

Is Oprah Fuckable?

newbie

Activity: 35

Merit: 0

A community organised OTC thread with escrow is much better than yobit, any association with scam exchanges raises red flag for picoin.

Build community first, then second tier exchanges like c-cex and cryptopia become first milestone.

Anon11073

sr. member

Activity: 896

Merit: 289

Twitter: @BTY_11073

Quote from: lupanar on March 27, 2017, 08:44:37 PM

Who's that "unknown" guy on pi.8pool that having block rewards with NO Actual Shares??? It's a chiter or what???

Also. Let's wait for correction ...
More than that, I do not receive account lock email... Sad

lupanar

sr. member

Activity: 1344

Merit: 252

Who's that "unknown" guy on pi.8pool that having block rewards with NO Actual Shares??? It's a chiter or what???

care2yak

sr. member

Activity: 779

Merit: 255

I too agree with the rest of those who dislike yobit. Hope this gets into cryptopia or nova exchange so it can be paired with other alts.

OGBabeh

newbie

Activity: 21

Merit: 0

Quote from: picoindev on March 27, 2017, 10:14:26 AM

General update:

We have finished the shareholder list. I will upload the new list in a few minutes.
PiCoin addresses have been put on the private shareholderslist.
The blockexplorer is also synced soon, i will post link as soon as it is synced. So far the explorer is looking not to bad Wink

Link to explorer: http://explorer.picoin.club/

This is the main address for the shareholderlist: 3Go2z7zz6RgV16ZF8rvEkQBPZoQ3gVDDq6

Please send "addcoin" request to yobit here: https://yobit.net/en/addcoin/

Hey Dev, I signed up at website and PM'd you yesterday but didn't make the list?

l8nit3

legendary

Activity: 1007

Merit: 1000

Quote from: Banger42 on March 27, 2017, 04:01:49 PM

Quote from: legday on March 27, 2017, 03:41:41 PM

Quote from: Banger42 on March 27, 2017, 02:43:39 PM

Quote from: legday on March 27, 2017, 02:40:40 PM

I tried to join a pool at and started mining at http://pi.8pool.dtdns.net

minerd -a scrypt -t 6 -s 4 -o stratum+tcp://stratum-pi.8pool.dtdns.net:3335 -u myusername.myworkername -p mypassword

am I doing something wrong? I've been mining for a while now

its not scrypt, its x13 ... use sgminer

okay so in sgminer I type this

URL:
stratum+tcp://107.161.95.108:3351

Username
My wallet address
and password

I get this message

[00:38:58] Startup GPU initialization... Using settings from pool picoin.
[00:38:58] Startup Pool No = 0
[00:38:58] Initialising kernel marucoin-mod.cl with nfactor 10, n 1024
[00:38:58] Probing for an alive pool

and its stuck

Load the newest Miner here:
sgminer is here (amd): https://github.com/nicehash/sgminer/releases/download/5.2.1/sgminer-v5.2.1-windows.zip
ccminer is here (nvidia): http://cryptomining-blog.com/tag/ccminer-x13/

And use the config file there and change it.
I have done this with sgminer 5.2.1 and it works fine.

Banger

Ive tested the port locally and it seems to connect fine, if you continue having issues try port 3352 for VARDIFF
thanks Banger for helping out

legday

sr. member

Activity: 560

Merit: 252

Quote from: Banger42 on March 27, 2017, 04:01:49 PM

Quote from: legday on March 27, 2017, 03:41:41 PM

Quote from: Banger42 on March 27, 2017, 02:43:39 PM

Quote from: legday on March 27, 2017, 02:40:40 PM

I tried to join a pool at and started mining at http://pi.8pool.dtdns.net

minerd -a scrypt -t 6 -s 4 -o stratum+tcp://stratum-pi.8pool.dtdns.net:3335 -u myusername.myworkername -p mypassword

am I doing something wrong? I've been mining for a while now

its not scrypt, its x13 ... use sgminer

okay so in sgminer I type this

URL:
stratum+tcp://107.161.95.108:3351

Username
My wallet address
and password

I get this message

[00:38:58] Startup GPU initialization... Using settings from pool picoin.
[00:38:58] Startup Pool No = 0
[00:38:58] Initialising kernel marucoin-mod.cl with nfactor 10, n 1024
[00:38:58] Probing for an alive pool

and its stuck

Load the newest Miner here:
sgminer is here (amd): https://github.com/nicehash/sgminer/releases/download/5.2.1/sgminer-v5.2.1-windows.zip
ccminer is here (nvidia): http://cryptomining-blog.com/tag/ccminer-x13/

And use the config file there and change it.
I have done this with sgminer 5.2.1 and it works fine.

Banger

thanks a lot. It worked!

Banger42

sr. member

Activity: 379

Merit: 250

Quote from: legday on March 27, 2017, 03:41:41 PM

Quote from: Banger42 on March 27, 2017, 02:43:39 PM

Quote from: legday on March 27, 2017, 02:40:40 PM

I tried to join a pool at and started mining at http://pi.8pool.dtdns.net

minerd -a scrypt -t 6 -s 4 -o stratum+tcp://stratum-pi.8pool.dtdns.net:3335 -u myusername.myworkername -p mypassword

am I doing something wrong? I've been mining for a while now

its not scrypt, its x13 ... use sgminer

okay so in sgminer I type this

URL:
stratum+tcp://107.161.95.108:3351

Username
My wallet address
and password

I get this message

[00:38:58] Startup GPU initialization... Using settings from pool picoin.
[00:38:58] Startup Pool No = 0
[00:38:58] Initialising kernel marucoin-mod.cl with nfactor 10, n 1024
[00:38:58] Probing for an alive pool

and its stuck

Load the newest Miner here:
sgminer is here (amd): https://github.com/nicehash/sgminer/releases/download/5.2.1/sgminer-v5.2.1-windows.zip
ccminer is here (nvidia): http://cryptomining-blog.com/tag/ccminer-x13/

And use the config file there and change it.
I have done this with sgminer 5.2.1 and it works fine.

Banger

Wassopotamia

member

Activity: 129

Merit: 10

add exchange
Coinexchange.io Cheesy

legday

sr. member

Activity: 560

Merit: 252

Quote from: Banger42 on March 27, 2017, 02:43:39 PM

Quote from: legday on March 27, 2017, 02:40:40 PM

I tried to join a pool at and started mining at http://pi.8pool.dtdns.net

minerd -a scrypt -t 6 -s 4 -o stratum+tcp://stratum-pi.8pool.dtdns.net:3335 -u myusername.myworkername -p mypassword

am I doing something wrong? I've been mining for a while now

its not scrypt, its x13 ... use sgminer

okay so in sgminer I type this

URL:
stratum+tcp://107.161.95.108:3351

Username
My wallet address
and password

I get this message

[00:38:58] Startup GPU initialization... Using settings from pool picoin.
[00:38:58] Startup Pool No = 0
[00:38:58] Initialising kernel marucoin-mod.cl with nfactor 10, n 1024
[00:38:58] Probing for an alive pool

and its stuck

lastlove9091

hero member

Activity: 658

Merit: 500

Yeah! I have joined this coin Cheesy

.... waiting for mining!

Topic: [ANN]PiCoin [POS+POW] [SIGNATURE CAMPAIGN] - page 91. (Read 150826 times)