Topic: [ANN]PinkCoin (PC) | [X11] Pure 100% PoS | No premine | No IPO |bittrex.com - page 25. (Read 74786 times)

Quote from: azhago on May 05, 2014, 07:29:10 AM

Quote

There are also reports chinese farms are raping x11 coins with FPGA miners

Chineese gpu farm, yes, surely, but fpga ? It cost higher to make/use fpga than GPU.
Nothing unfair if gpufarm rape the coin, unfortunately for little miners like us. If i had ton of fpga, i'll go on DRK, not a coin without confirmed success.

Did someone look at the source ? (i'm not competent to)

http://elinux.org/Parallella_Hardware

Only $99 for a board with both a Parallella manycore and Xilinx Zynq 7010 or 7020 FPGA...

And the hashrate is ??
As i know (but i'm not a specialist at all), the hashrate is pretty low. It's cheaper to use GPU.

On a fpga board, you can reach 400MH/s with SHA256. A R9 280x do much more than that if i remember well

(and if i'm wrong, i'll buy fpga instead of gpu!)

Depends on the board but FPGA's are far more efficient:

https://bitcointalk.org/index.php?topic=49180.980

X11 has some 1.8GH and 1.2GH FPGA miners around. How many GPU's you need for that, LOL:

https://bitcointalksearch.org/topic/these-new-efficient-x11-algos-everyone-is-talking-about-bullshit-or-real-556277

FPGA implementation of SHA algo (keccak, groestl etc.. all part of X11) is not new. But why didn't we see bunch of seller with FPGA with X11 ready (or even groestl, keccak etc)
I read your links : 50KH/s with scrypt. It's just a proof of concept, not economicaly usuable.

Quote

X11 has some 1.8GH and 1.2GH FPGA miners around

Where ? Any evidence of that other than conspiracy theory? (if yes, again, i will buy some...)

PPL who use bold capital letters to make their argument seem more valid are retarded for sure. I stopped reading there after a few rows.

Vann

hero member

Activity: 1036

Merit: 606

Quote from: Vann on May 05, 2014, 07:10:00 AM

Quote from: Vann on May 05, 2014, 07:10:00 AM

Quote

There are also reports chinese farms are raping x11 coins with FPGA miners

Chineese gpu farm, yes, surely, but fpga ? It cost higher to make/use fpga than GPU.
Nothing unfair if gpufarm rape the coin, unfortunately for little miners like us. If i had ton of fpga, i'll go on DRK, not a coin without confirmed success.

Did someone look at the source ? (i'm not competent to)

http://elinux.org/Parallella_Hardware

Only $99 for a board with both a Parallella manycore and Xilinx Zynq 7010 or 7020 FPGA...

And the hashrate is ??
As i know (but i'm not a specialist at all), the hashrate is pretty low. It's cheaper to use GPU.

On a fpga board, you can reach 400MH/s with SHA256. A R9 280x do much more than that if i remember well

(and if i'm wrong, i'll buy fpga instead of gpu!)

Depends on the board but FPGA's are far more efficient:

https://bitcointalk.org/index.php?topic=49180.980

X11 has some 1.8GH and 1.2GH FPGA miners around. How many GPU's you need for that, LOL:

https://bitcointalksearch.org/topic/these-new-efficient-x11-algos-everyone-is-talking-about-bullshit-or-real-556277

FPGA implementation of SHA algo (keccak, groestl etc.. all part of X11) is not new. But why didn't we see bunch of seller with FPGA with X11 ready (or even groestl, keccak etc)
I read your links : 50KH/s with scrypt. It's just a proof of concept, not economicaly usuable.

Quote

X11 has some 1.8GH and 1.2GH FPGA miners around

Where ? Any evidence of that other than conspiracy theory? (if yes, again, i will buy some...)

There have been reports that FPGA farms exist for x11. The low profitablility of all x11 coins compared to scrypt which already has ASIC miners avaible and the fact that 1GH+ miners are showing up in pools seems to indicate there is more to x11 mining than is being made available, don't you think? Perhaps they are too busy raping the coins to offer them for sale!

azhago

full member

Activity: 182

Merit: 100

Quote

There are also reports chinese farms are raping x11 coins with FPGA miners

Chineese gpu farm, yes, surely, but fpga ? It cost higher to make/use fpga than GPU.
Nothing unfair if gpufarm rape the coin, unfortunately for little miners like us. If i had ton of fpga, i'll go on DRK, not a coin without confirmed success.

Did someone look at the source ? (i'm not competent to)

http://elinux.org/Parallella_Hardware

Only $99 for a board with both a Parallella manycore and Xilinx Zynq 7010 or 7020 FPGA...

And the hashrate is ??
As i know (but i'm not a specialist at all), the hashrate is pretty low. It's cheaper to use GPU.

On a fpga board, you can reach 400MH/s with SHA256. A R9 280x do much more than that if i remember well

(and if i'm wrong, i'll buy fpga instead of gpu!)

Depends on the board but FPGA's are far more efficient:

https://bitcointalk.org/index.php?topic=49180.980

X11 has some 1.8GH and 1.2GH FPGA miners around. How many GPU's you need for that, LOL:

https://bitcointalksearch.org/topic/these-new-efficient-x11-algos-everyone-is-talking-about-bullshit-or-real-556277

FPGA implementation of SHA algo (keccak, groestl etc.. all part of X11) is not new. But why didn't we see bunch of seller with FPGA with X11 ready (or even groestl, keccak etc)
I read your links : 50KH/s with scrypt. It's just a proof of concept, not economicaly usuable.

Quote

X11 has some 1.8GH and 1.2GH FPGA miners around

Where ? Any evidence of that other than conspiracy theory? (if yes, again, i will buy some...)

Vann

hero member

Activity: 1036

Merit: 606

Quote from: orpington on May 05, 2014, 05:42:29 AM

Quote

There are also reports chinese farms are raping x11 coins with FPGA miners

Chineese gpu farm, yes, surely, but fpga ? It cost higher to make/use fpga than GPU.
Nothing unfair if gpufarm rape the coin, unfortunately for little miners like us. If i had ton of fpga, i'll go on DRK, not a coin without confirmed success.

Did someone look at the source ? (i'm not competent to)

http://elinux.org/Parallella_Hardware

Only $99 for a board with both a Parallella manycore and Xilinx Zynq 7010 or 7020 FPGA...

And the hashrate is ??
As i know (but i'm not a specialist at all), the hashrate is pretty low. It's cheaper to use GPU.

On a fpga board, you can reach 400MH/s with SHA256. A R9 280x do much more than that if i remember well

(and if i'm wrong, i'll buy fpga instead of gpu!)

Depends on the board but FPGA's are far more efficient:

https://bitcointalk.org/index.php?topic=49180.980

X11 has some 1.8GH and 1.2GH FPGA miners around. How many GPU's you need for that, LOL:

https://bitcointalksearch.org/topic/these-new-efficient-x11-algos-everyone-is-talking-about-bullshit-or-real-556277

cryptohunter

legendary

Activity: 2100

Merit: 1167

MY RED TRUST LEFT BY SCUMBAGS - READ MY SIG

0.7% premine not too bad really Tongue

Instamined scam shit, 140 block before release then another 150 blocks before anyone had downloaded, virus scanned, conf, bat

it was a shit scam coin, let it die

azhago

full member

Activity: 182

Merit: 100

Quote

There are also reports chinese farms are raping x11 coins with FPGA miners

Chineese gpu farm, yes, surely, but fpga ? It cost higher to make/use fpga than GPU.
Nothing unfair if gpufarm rape the coin, unfortunately for little miners like us. If i had ton of fpga, i'll go on DRK, not a coin without confirmed success.

Did someone look at the source ? (i'm not competent to)

http://elinux.org/Parallella_Hardware

Only $99 for a board with both a Parallella manycore and Xilinx Zynq 7010 or 7020 FPGA...

And the hashrate is ??
As i know (but i'm not a specialist at all), the hashrate is pretty low. It's cheaper to use GPU.

On a fpga board, you can reach 400MH/s with SHA256. A R9 280x do much more than that if i remember well

(and if i'm wrong, i'll buy fpga instead of gpu!)

Vann

hero member

Activity: 1036

Merit: 606