⚓[ANN][PIRATE][POW⚔POS]☝[MASTERNODE]☝PIRATECASH ➥ 100% ECO CRYPTOCURRENCY - page 9.

Juse14

sr. member

Activity: 1106

Merit: 398

Duelbits

How many coin needed for masternode? When we can start runing masternode?

piratecash

member

Activity: 851

Merit: 53

Quote from: airalexander1 on November 14, 2018, 05:20:10 AM

I wish you success in the project! This project very good, join now with me. The team approaches the development of the product, everything becomes clear. I see the big future of it projects Good luck team

Thank you

airalexander1

newbie

Activity: 16

Merit: 0

I wish you success in the project! This project very good, join now with me. The team approaches the development of the product, everything becomes clear. I see the big future of it projects Good luck team

piratecash

member

Activity: 851

Merit: 53

There is a new version
v1.0.2.4 (Nov 14, 2018)
[bug] Fixed issue with wallet management when it activated for staking
https://piratecash.net/en/site/download

crypt0sc0pe

member

Activity: 392

Merit: 11

Quote from: yiyosawese on November 13, 2018, 11:22:10 PM

where will there be a pool? How many current node is active? Do you have plans for any exchange?

Please read the Open Post carefully, there is all necessary information. Also you can join PirateCash telegram chat https://t.me/joinchat/FtUaLREioKVyF6EPNVtnIQ and discord https://discord.gg/cbTdqxx

Stay tuned. More great features are coming.

yiyosawese

newbie

Activity: 28

Merit: 0

where will there be a pool? How many current node is active? Do you have plans for any exchange?

wovomel

newbie

Activity: 28

Merit: 0

Do you need translation

piratecash

member

Activity: 851

Merit: 53

Quote from: kexukamugu on November 12, 2018, 11:56:42 PM

I still can mining do solo this coin?

yes, but you need ASIC 19.7512 Network (GH/s). I didn't expect that the PoW is still actual and PoW will be disabled after 100 000 block.

kexukamugu

newbie

Activity: 35

Merit: 0

I still can mining do solo this coin?

gades

sr. member

Activity: 432

Merit: 254

Pirate has been added to the site http://newcoinann.info/

gades

sr. member

Activity: 432

Merit: 254

Quote from: MassiveStroke on November 11, 2018, 04:33:40 PM

Any pools for the coin?

we have 3 pools

Quote from: Bitcoin-Pool on November 12, 2018, 02:52:48 AM

Bitcoin-Pool.de is ready for Mining !
We are online 24/7
0.9% Fee

Algo: scrypt

Code:

stratum+tcp://bitcoin-pool.de:3433 -u YOUR_WALLET_ADDRESS -p c=PIRATE or d=8192 (your diff)

Quote from: MinersHeaven on November 04, 2018, 05:32:44 AM

PirateCash

https://pool.blockhunter.info

-o stratum+tcp://pool.blockhunter.info:3433 -u [-p c=PIRATE]

Pool Fee 0,5%
Payout Hourly

Quote from: pool operator on November 04, 2018, 12:31:42 PM

pool Pirate cash coin https://smithpool.net

conf for miners (-a scrypt -o stratum+tcp://smithpool.dynu.net:3433 -u yourwalletaddress -p c=PIRATE)

conf for miners high difficulty(-a scrypt -o stratum+tcp://smithpool.dynu.net:33433 -u yourwalletaddress -p c=PIRATE)

for high difficulty nicehash or miningrigrental add only ,d =your diff or port dedicate 33433

example -a scrypt -o stratum+tcp://smithpool.dynu.net:3433 -u yourwalletaddress -p c=PIRATE,d=65000 or whatever you want

block explorer https://smithpool.net/explorer/PIRATE

discord support and coin request https://discord.gg/Zy5esd6

low fee .... good job

Links | Website | Support | Project
http://bitcoin-pool.de
https://discord.gg/ZsSUb5F
https://bitcointalksearch.org/topic/swap-wcc-posmasternodesanonymousfasttor-worldcurrencycoin-swap-2817561

piratecash

member

Activity: 851

Merit: 53

Quote from: luksbit on November 12, 2018, 07:09:02 AM

Is it that being ecological, POW mining can not divert these characteristics from the project? Because mining POW spends a lot of electricity

yes, it's main idea to decrease usage electricity and PoW is need only for start this project (4-5 month). Also, it isn't all freatures here. Pirate is money for internal ecosystem and it will be used for services

crypt0sc0pe

member

Activity: 392

Merit: 11

Quote from: luksbit on November 12, 2018, 07:09:02 AM

Is it that being ecological, POW mining can not divert these characteristics from the project? Because mining POW spends a lot of electricity

Quote from: piratecash on November 12, 2018, 06:11:30 AM

Quote from: Batus on November 12, 2018, 06:08:54 AM

Quote from: gades on November 12, 2018, 02:23:28 AM

Quote from: Sergei.Gerasimenko on November 11, 2018, 05:25:32 PM

What do you mean by saying that your token is an eco cryptocurrency? Please add this to the first post of your thread.

after 100 000 blocks, the PoW will be disabled and this network will nor require BIG power and it will ASIC resistant

Before 100 000 block ASIC owners will mine so huge qtty of Pirate Coin that price will be dumped from beginning

no, the PoW reward is 10 PIRATE and PoS reward 50 Pirate (60% to Masternode and 40% to Staker).

Exactly! The best way to mine PIRATE is to buy some coins on exchange and start POS mining* immediately. You don't need to use any expensive hardware and spend electrical power.

*NOTE

1. POW mining only until 100.000 block
2. Total coin supply ~105M PIRATE
3. Don't forget to unlock your wallet https://piratecash.net/en/site/quickstart#staking

luksbit

sr. member

Activity: 1204

Merit: 252

Is it that being ecological, POW mining can not divert these characteristics from the project? Because mining POW spends a lot of electricity

mocacinno

legendary

Activity: 3584

Merit: 5243

https://merel.mobi => buy facemasks with BTC/LTC

Quote from: piratecash on November 12, 2018, 05:59:42 AM

From --help output
piratecashd [options] [params] Send command to -server or piratecashd

you need specify help without --

Got it now... It works, thanks!

piratecash

member

Activity: 851

Merit: 53

Quote from: Batus on November 12, 2018, 06:08:54 AM

Quote from: gades on November 12, 2018, 02:23:28 AM

Quote from: Sergei.Gerasimenko on November 11, 2018, 05:25:32 PM

What do you mean by saying that your token is an eco cryptocurrency? Please add this to the first post of your thread.

after 100 000 blocks, the PoW will be disabled and this network will nor require BIG power and it will ASIC resistant

Before 100 000 block ASIC owners will mine so huge qtty of Pirate Coin that price will be dumped from beginning

no, the PoW reward is 10 PIRATE and PoS reward 50 Pirate (60% to Masternode and 40% to Staker).

Batus

full member

Activity: 364

Merit: 100

Quote from: gades on November 12, 2018, 02:23:28 AM

Quote from: Sergei.Gerasimenko on November 11, 2018, 05:25:32 PM

What do you mean by saying that your token is an eco cryptocurrency? Please add this to the first post of your thread.

after 100 000 blocks, the PoW will be disabled and this network will nor require BIG power and it will ASIC resistant

Before 100 000 block ASIC owners will mine so huge qtty of Pirate Coin that price will be dumped from beginning

piratecash

member

Activity: 851

Merit: 53

Quote from: mocacinno on November 12, 2018, 05:40:24 AM

Are you sure? running piratecashd --help gives the following output:

to be honest, these look like standard daemon startup options, i don't see any info on how to run 'common' cli commands like creating new addresses, sending funds, looking at the mempool or the outputs,...

Quote

piratecashd help
addmultisigaddress nrequired ["key",...] ( "account" )
addnode
addredeemscript [account]
backupwallet "destination"
checkkernel [{"txid":txid,"vout":n},...] [createblocktemplate=false]
checkwallet
clearbanned
createmultisig nrequired ["key",...]
createrawtransaction [{"txid":txid,"vout":n},...] {address:amount,...}
darksend
decoderawtransaction
decodescript
dumpprivkey
dumpwallet
getaccount "piratecashaddress"
getaccountaddress "account"
getaddednodeinfo [node]
getaddressesbyaccount "account"
getbalance ( "account" minconf includeWatchonly )
getbestblockhash
getblock [txinfo]
getblockbynumber [txinfo]
getblockcount
getblockhash
getblocktemplate [params]
getcheckpoint
getconnectioncount
getdifficulty
getinfo
getmininginfo
getnettotals
getnewaddress ( "account" )
getnewpubkey [account]
getnewstealthaddress [label]
getpeerinfo
getrawmempool
getrawtransaction [verbose=0]
getreceivedbyaccount "account" ( minconf )
getreceivedbyaddress "piratecashaddress" ( minconf )
getstakesubsidy
getstakinginfo
getsubsidy [nTarget]
gettransaction "txid" ( includeWatchonly )
getwork [data]
getworkex [data, coinbase]
help [command]
importaddress "address" ( "label" rescan )
importprivkey [label] [rescan=true]
importstealthaddress [label]
importwallet
keypoolrefill ( newsize )
listaccounts ( minconf includeWatchonly)
listaddressgroupings
listbanned
listreceivedbyaccount ( minconf includeempty includeWatchonly)
listreceivedbyaddress ( minconf includeempty includeWatchonly)
listsinceblock ( "blockhash" target-confirmations includeWatchonly)
liststealthaddresses [show_secrets=0]
listtransactions ( "account" count from includeWatchonly)
listunspent [minconf=1] [maxconf=9999999] ["address",...]
makekeypair [prefix]
masternode "command"... ( "passphrase" )
masternodelist ( "mode" "filter" )
move "fromaccount" "toaccount" amount ( minconf "comment" )
ping
repairwallet
resendtx
reservebalance [ [amount]]
scanforalltxns [fromHeight]
scanforstealthtxns [fromHeight]
searchrawtransactions

[verbose=1] [skip=0] [count=100]
sendalert [cancelupto]
sendfrom "fromaccount" "topiratecashaddress" amount ( minconf "comment" "comment-to" )
sendmany "fromaccount" {"address":amount,...} ( minconf "comment" )
sendrawtransaction
sendtoaddress "piratecashaddress" amount ( "comment" "comment-to" )
sendtostealthaddress [comment] [comment-to] [narration]
setaccount "piratecashaddress" "account"
setban "ip(/netmask)" "add|remove" (bantime) (absolute)
settxfee amount
signmessage "piratecashaddress" "message"
signrawtransaction [{"txid":txid,"vout":n,"scriptPubKey":hex,"redeemScript":hex},...] [,...] [sighashtype="ALL"]
smsgaddkey

smsgbuckets [stats|dump]
smsgdisable
smsgenable
smsggetpubkey

|anon <+/->

]
smsgoptions [list|set ]
smsgoutbox [all|clear]
smsgscanbuckets
smsgscanchain
smsgsend
smsgsendanon
spork []
stop
submitblock [optional-params-obj]
validateaddress
validatepubkey
verifymessage
walletlock
walletpassphrase "passphrase" timeout ( anonymizeonly )
walletpassphrasechange "oldpassphrase" "newpassphrase"

From --help output
piratecashd [options] [params] Send command to -server or piratecashd

you need specify help without --

mocacinno

legendary

Activity: 3584

Merit: 5243

https://merel.mobi => buy facemasks with BTC/LTC

Quote from: piratecash on November 12, 2018, 05:36:27 AM

--snip--

piratecashd is cli utility too. Without parameters it will run daemon and with it you will see outputs like coinmame-cli (i'll split cli and daemon in future realises)

--snip--

Are you sure? running piratecashd --help gives the following output:

Quote

./piratecashd --help
Piratecash version v1.0.1.3-60010

Usage:
piratecashd [options]
piratecashd [options] [params] Send command to -server or piratecashd
piratecashd [options] help List commands
piratecashd [options] help Get help for a command

Options:
-? This help message
-conf= Specify configuration file (default: piratecash.conf)
-pid= Specify pid file (default: piratecashd.pid)
-datadir= Specify data directory
-wallet= Specify wallet file (within data directory)
-dbcache= Set database cache size in megabytes (default: 10)
-dbwalletcache= Set wallet database cache size in megabytes (default: 1)
-dblogsize= Set database disk log size in megabytes (default: 100)
-timeout= Specify connection timeout in milliseconds (default: 5000)
-proxy= Connect through SOCKS5 proxy
-tor= Use proxy to reach tor hidden services (default: same as -proxy)
-dns Allow DNS lookups for -addnode, -seednode and -connect
-port= Listen for connections on (default: 23232)
-maxconnections= Maintain at most connections to peers (default: 125)
-addnode= Add a node to connect to and attempt to keep the connection open
-connect= Connect only to the specified node(s)
-seednode= Connect to a node to retrieve peer addresses, and disconnect
-externalip= Specify your own public address
-onlynet= Only connect to nodes in network (IPv4, IPv6 or Tor)
-discover Discover own IP address (default: 1 when listening and no -externalip)
-irc Find peers using internet relay chat (default: 0)
-listen Accept connections from outside (default: 1 if no -proxy or -connect)
-bind= Bind to given address. Use [host]:port notation for IPv6
-dnsseed Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect)
-forcednsseed Always query for peer addresses via DNS lookup (default: 0)
-synctime Sync time with other nodes. Disable if time on your system is precise e.g. syncing with NTP (default: 1)
-banscore= Threshold for disconnecting misbehaving peers (default: 100)
-bantime= Number of seconds to keep misbehaving peers from reconnecting (default: 86400)
-maxreceivebuffer= Maximum per-connection receive buffer, *1000 bytes (default: 5000)
-maxsendbuffer= Maximum per-connection send buffer, *1000 bytes (default: 1000)
-upnp Use UPnP to map the listening port (default: 0)
-paytxfee= Fee per KB to add to transactions you send
-mininput= When creating transactions, ignore inputs with value less than this (default: 0.01)
-testnet Use the test network
-debug= Output debugging information (default: 0, supplying is optional)
If is not supplied, output all debugging information.
can be: addrman, alert, db, lock, rand, rpc, selectcoins, mempool, net, coinage, coinstake, creation, stakemodifier.
-logtimestamps Prepend debug output with timestamp
-shrinkdebugfile Shrink debug.log file on client startup (default: 1 when no -debug)
-printtoconsole Send trace/debug info to console instead of debug.log file
-regtest Enter regression test mode, which uses a special chain in which blocks can be solved instantly. This is intended for regression testing tools and app development.
-rpcuser= Username for JSON-RPC connections
-rpcpassword= Password for JSON-RPC connections
-rpcport= Listen for JSON-RPC connections on (default: 3535)
-rpcallowip= Allow JSON-RPC connections from specified IP address
-rpcconnect= Send commands to node running on (default: 127.0.0.1)
-rpcwait Wait for RPC server to start
-rpcthreads= Set the number of threads to service RPC calls (default: 4)
-blocknotify= Execute command when the best block changes (%s in cmd is replaced by block hash)
-walletnotify= Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)
-confchange Require a confirmations for change (default: 0)
-alertnotify= Execute command when a relevant alert is received (%s in cmd is replaced by message)
-upgradewallet Upgrade wallet to latest format
-createwalletbackups= Number of automatic wallet backups (default: 10)
-keypool= Set key pool size to (default: 100) (litemode: 10)
-rescan Rescan the block chain for missing wallet transactions
-salvagewallet Attempt to recover private keys from a corrupt wallet.dat
-checkblocks= How many blocks to check at startup (default: 500, 0 = all)
-checklevel= How thorough the block verification is (0-6, default: 1)
-loadblock= Imports blocks from external blk000?.dat file
-maxorphanblocks= Keep at most unconnectable blocks in memory (default: 750)

Block creation options:
-blockminsize= Set minimum block size in bytes (default: 0)
-blockmaxsize= Set maximum block size in bytes (default: 250000)
-blockprioritysize= Set maximum size of high-priority/low-fee transactions in bytes (default: 27000)

SSL options: (see the Bitcoin Wiki for SSL setup instructions)
-rpcssl Use OpenSSL (https) for JSON-RPC connections
-rpcsslcertificatechainfile= Server certificate file (default: server.cert)
-rpcsslprivatekeyfile= Server private key (default: server.pem)
-rpcsslciphers= Acceptable ciphers (default: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv3:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH)
-litemode= Disable all Darksend and Stealth Messaging related functionality (0-1, default: 0)

Masternode options:
-masternode= Enable the client to act as a masternode (0-1, default: 0)
-mnconf= Specify masternode configuration file (default: masternode.conf)
-mnconflock= Lock masternodes from masternode configuration file (default: 1)
-masternodeprivkey= Set the masternode private key
-masternodeaddr= Set external address:port to get to this masternode (example: address:port)
-masternodeminprotocol= Ignore masternodes less than version (example: 61401; default : 0)

Darksend options:
-enabledarksend= Enable use of automated darksend for funds stored in this wallet (0-1, default: 0)
-darksendrounds= Use N separate masternodes to anonymize funds (2-8, default: 2)
-anonymizepiratecashamount= Keep N Piratecash anonymized (default: 0)
-liquidityprovider= Provide liquidity to Darksend by infrequently mixing coins on a continual basis (0-100, default: 0, 1=very frequent, high fees, 100=very infrequent, low fees)

InstantX options:
-enableinstantx= Enable instantx, show confirmations for locked transactions (bool, default: true)
-instantxdepth= Show N confirmations for a successfully locked transaction (0-9999, default: 10)
Secure messaging options:
-nosmsg Disable secure messaging.
-debugsmsg Log extra debug messages.
-smsgscanchain Scan the block chain for public key addresses on startup.

to be honest, these look like standard daemon startup options, i don't see any info on how to run 'common' cli commands like creating new addresses, sending funds, looking at the mempool or the outputs,...

piratecash

member

Activity: 851

Merit: 53

Quote from: mocacinno on November 12, 2018, 04:36:00 AM

Good luck with your new project... I checked it out and installed it on my sandbox system... I did have 2 remarks tough:

I couldn't get the sourcecode compiled, so i chose to use the precompiled linux binaries... However, i'm missing some tools here. The tar.gz contains the daemon and the QT, but i'm missing piratecash-cli so i can execute cli commands against a running daemon
Your website is still talking about running minerd and cpu-mining, i set everything up for a short solo-mine, but at current diff, it's nearly impossible to do this... I guess your network has a couple GPU or ASIC miners, making it nearly impossible to cpu mine. I'd rather see this option removed from your website TBH

For the rest, it looked nice, and i'll probably be following your development

Thank you for your feedback.

piratecashd is cli utility too. Without parameters it will run daemon and with it you will see outputs like coinmame-cli (i'll split cli and daemon in future realises)

yes, now there are already ASIC's since this algorithm has been around for a long time already, but PoW will be disabled after 120 days (after 100,000 block). You can use mining pools for joing mining if you want PoW. The documentation for PoW mining will be removed after 100,000 block.

p.s./ Please fill the form and 2018-12-01 i'll send second baunty from http://block.piratecash.net:3001/address/PApM8upKg8xcHGFi4mZVNPp5eB8kx3vgmN to all who filled the form http://l2u.su/qbnH

Topic: ⚓[ANN][PIRATE][POW⚔POS]☝[MASTERNODE]☝PIRATECASH ➥ 100% ECO CRYPTOCURRENCY - page 9. (Read 26911 times)