[ANN][PIVX] - PRIVATE INSTANT VERIFIED TRANSACTION - PROOF OF STAKE - ZEROCOIN - page 354.

borris123

hero member

Activity: 728

Merit: 500

Quote from: mikegi on August 18, 2016, 05:58:25 PM

Ok...

A couple of my masternodes stuck at 260598,

Restarted and they are ok... "status" : "Masternode successfully started" without having to do anything on the controller. After restarting, the blockhash for 260598 changed to the hopefully correct one.

NOT stuck:
darknet-cli getblockhash 260598 246a20ed8ceb48a6d7975a69993db5e4edee95470d9480e0f95673785e12a5e5

STUCK:
$ darknet-cli getblockhash 260598 d0e84fd138bb89b3a8881dadd4f50baf78f992361e7715ea611235c41a6cdda0

darknet-cli getchaintips [ { "height" : 260709, "hash" : "a070dc031723cda052a3f4798c456324d6c9badddb1acb02525750697d46563d", "branchlen" : 0, "status" : "active" }, { "height" : 260598, "hash" : "d0e84fd138bb89b3a8881dadd4f50baf78f992361e7715ea611235c41a6cdda0", "branchlen" : 19, "status" : "valid-headers" }, { "height" : 260595, "hash" : "b33099e3006b92b48c60e7ca6e31eb04b2405733645245e67c6bf15e8649c0ba", "branchlen" : 1, "status" : "valid-fork" }, { "height" : 259901, "hash" : "2a83196b23e76314d50d8cdd11bb370db28a686dda852c3f9b9c9305e640255d", "branchlen" : 14, "status" : "valid-fork" }, { "height" : 259817, "hash" : "80649f7287034ff01382de577e2e4367a8dfde83b0e72d765e75a3183dc87b06", "branchlen" : 17, "status" : "valid-fork" }, { "height" : 259814, "hash" : "8602ff8f646378dfcfba163f8b428f82ddb5a42962d4b54270b323dca02f41a1", "branchlen" : 14, "status" : "headers-only" } ]

restarting them fixes them abit but then gets stuck at 260709

mikegi

full member

Activity: 165

Merit: 100

Ok...

A couple of my masternodes stuck at 260598,

Restarted and they are ok... "status" : "Masternode successfully started" without having to do anything on the controller. After restarting, the blockhash for 260598 changed to the hopefully correct one.

NOT stuck:
darknet-cli getblockhash 260598 246a20ed8ceb48a6d7975a69993db5e4edee95470d9480e0f95673785e12a5e5

STUCK:
$ darknet-cli getblockhash 260598 d0e84fd138bb89b3a8881dadd4f50baf78f992361e7715ea611235c41a6cdda0

darknet-cli getchaintips [ { "height" : 260709, "hash" : "a070dc031723cda052a3f4798c456324d6c9badddb1acb02525750697d46563d", "branchlen" : 0, "status" : "active" }, { "height" : 260598, "hash" : "d0e84fd138bb89b3a8881dadd4f50baf78f992361e7715ea611235c41a6cdda0", "branchlen" : 19, "status" : "valid-headers" }, { "height" : 260595, "hash" : "b33099e3006b92b48c60e7ca6e31eb04b2405733645245e67c6bf15e8649c0ba", "branchlen" : 1, "status" : "valid-fork" }, { "height" : 259901, "hash" : "2a83196b23e76314d50d8cdd11bb370db28a686dda852c3f9b9c9305e640255d", "branchlen" : 14, "status" : "valid-fork" }, { "height" : 259817, "hash" : "80649f7287034ff01382de577e2e4367a8dfde83b0e72d765e75a3183dc87b06", "branchlen" : 17, "status" : "valid-fork" }, { "height" : 259814, "hash" : "8602ff8f646378dfcfba163f8b428f82ddb5a42962d4b54270b323dca02f41a1", "branchlen" : 14, "status" : "headers-only" } ]

borris123

hero member

Activity: 728

Merit: 500

a few nodes stuck at 260598 a restart has fixed the problem tho.

sticking at 260709 in controller as well...looks like alot are stuck here =/

borris123

hero member

Activity: 728

Merit: 500

Quote from: StakeBox on August 18, 2016, 04:11:40 PM

Quote from: borris123 on August 18, 2016, 04:07:52 PM

Quote from: Haunebu81 on August 18, 2016, 03:22:45 PM

Quote from: borris123 on August 18, 2016, 02:56:41 PM

Quote from: Haunebu81 on August 18, 2016, 02:49:42 PM

The command " walletpassphrase "my pass phrase" 60" isn't working. I still have to enter my password each time I run the start-alias command. If I run start-missing, it locks up on me. Are there any other methods? I have 100 MN's here.

masternode start-alias mn1 YOURWALLETPASSWORD

just keep pressing up and changing the name/number when doing militple nodes

It worked fine for the first 9 masternodes. Now it's freezing at masternode start-alias master10 MYWALLETPASSWORD

Ye that's what I was saying in post above it crashes your wallet. The wallet lags out and doesn't enable then crashes. Don't think it's anything to do with wallet pre 2.1.0. Start-missing crashes it as well. But if you restart it some of them had enabled.

Yeah, this has been an ongoing thing for a few versions. I have found it is best to start a few masternodes using start-alias, wait a bit, then start a few more, wait a bit, etc. We will look into it, we have had some higher priority things to work on lately.

ye fair do's. how about a google hangout with all the devs to discuss things? Blocktalk did an interview with the other coin I am invested into Nexus (defo worth a look if you not heard of it, in my sig) I found having a Q an A helped me better understand the direction it was heading.

is it all steam ahead with the truly anonymous transactions now?

StakeBox

full member

Activity: 226

Merit: 100

Quote from: mxnsch on August 18, 2016, 04:12:07 PM

Quote from: StakeBox on August 18, 2016, 04:09:31 PM

Quote from: mxnsch on August 18, 2016, 03:47:48 PM

Quote from: BitcoinFX on August 05, 2016, 10:24:17 AM

Thought of the day ...

Masternode darknet.conf add :

reservebalance=10001

A friendly reminder. Having the switch behind us, a couple of masternode owners probably missed this valuable comment.

@DEVs
Please update the ANN post accordingly to avoid confused masternode owners Grin

Not needed. If you have a Qt wallet as either a standalone masternode or controller wallet you can go into coin control and see that the input(s) for the masternode(s) is(are) locked.

Nice, is that a new DNET specific feature? Never heard about that and i have installed hell a lot of masternodes Cheesy

While I would like to claim that bit as ours, we inherited it from Dash.

mxnsch

sr. member

Activity: 474

Merit: 252

Quote from: StakeBox on August 18, 2016, 04:09:31 PM

Quote from: mxnsch on August 18, 2016, 03:47:48 PM

Quote from: BitcoinFX on August 05, 2016, 10:24:17 AM

Thought of the day ...

Masternode darknet.conf add :

reservebalance=10001

A friendly reminder. Having the switch behind us, a couple of masternode owners probably missed this valuable comment.

@DEVs
Please update the ANN post accordingly to avoid confused masternode owners Grin

Not needed. If you have a Qt wallet as either a standalone masternode or controller wallet you can go into coin control and see that the input(s) for the masternode(s) is(are) locked.

Nice, is that a new DNET specific feature? Never heard about that and i have installed hell a lot of masternodes Cheesy

StakeBox

full member

Activity: 226

Merit: 100

Quote from: borris123 on August 18, 2016, 04:07:52 PM

Quote from: Haunebu81 on August 18, 2016, 03:22:45 PM

Quote from: borris123 on August 18, 2016, 02:56:41 PM

Quote from: Haunebu81 on August 18, 2016, 02:49:42 PM

The command " walletpassphrase "my pass phrase" 60" isn't working. I still have to enter my password each time I run the start-alias command. If I run start-missing, it locks up on me. Are there any other methods? I have 100 MN's here.

masternode start-alias mn1 YOURWALLETPASSWORD

just keep pressing up and changing the name/number when doing militple nodes

It worked fine for the first 9 masternodes. Now it's freezing at masternode start-alias master10 MYWALLETPASSWORD

Ye that's what I was saying in post above it crashes your wallet. The wallet lags out and doesn't enable then crashes. Don't think it's anything to do with wallet pre 2.1.0. Start-missing crashes it as well. But if you restart it some of them had enabled.

Yeah, this has been an ongoing thing for a few versions. I have found it is best to start a few masternodes using start-alias, wait a bit, then start a few more, wait a bit, etc. We will look into it, we have had some higher priority things to work on lately.

StakeBox

full member

Activity: 226

Merit: 100

Quote from: mxnsch on August 18, 2016, 03:47:48 PM

Quote from: BitcoinFX on August 05, 2016, 10:24:17 AM

Thought of the day ...

Masternode darknet.conf add :

reservebalance=10001

A friendly reminder. Having the switch behind us, a couple of masternode owners probably missed this valuable comment.

@DEVs
Please update the ANN post accordingly to avoid confused masternode owners Grin

Not needed. If you have a Qt wallet as either a standalone masternode or controller wallet you can go into coin control and see that the input(s) for the masternode(s) is(are) locked.

borris123

hero member

Activity: 728

Merit: 500

Quote from: mxnsch on August 18, 2016, 03:47:48 PM

Quote from: BitcoinFX on August 05, 2016, 10:24:17 AM

Thought of the day ...

Masternode darknet.conf add :

reservebalance=10001

A friendly reminder. Having the switch behind us, a couple of masternode owners probably missed this valuable comment.

@DEVs
Please update the ANN post accordingly to avoid confused masternode owners Grin

what's that for?

borris123

hero member

Activity: 728

Merit: 500

Quote from: Haunebu81 on August 18, 2016, 03:22:45 PM

Quote from: borris123 on August 18, 2016, 02:56:41 PM

Quote from: Haunebu81 on August 18, 2016, 02:49:42 PM

The command " walletpassphrase "my pass phrase" 60" isn't working. I still have to enter my password each time I run the start-alias command. If I run start-missing, it locks up on me. Are there any other methods? I have 100 MN's here.

masternode start-alias mn1 YOURWALLETPASSWORD

just keep pressing up and changing the name/number when doing militple nodes

It worked fine for the first 9 masternodes. Now it's freezing at masternode start-alias master10 MYWALLETPASSWORD

Ye that's what I was saying in post above it crashes your wallet. The wallet lags out and doesn't enable then crashes. Don't think it's anything to do with wallet pre 2.1.0. Start-missing crashes it as well. But if you restart it some of them had enabled.

mxnsch

sr. member

Activity: 474

Merit: 252

Quote from: BitcoinFX on August 05, 2016, 10:24:17 AM

Thought of the day ...

Masternode darknet.conf add :

reservebalance=10001

A friendly reminder. Having the switch behind us, a couple of masternode owners probably missed this valuable comment.

@DEVs
Please update the ANN post accordingly to avoid confused masternode owners Grin

Equalizer1970

hero member

Activity: 623

Merit: 500

Fortune favours the bold!

My wallet is now stuck on synchronizing sporks???

Haunebu81

hero member

Activity: 525

Merit: 500

Quote from: borris123 on August 18, 2016, 02:56:41 PM

Quote from: Haunebu81 on August 18, 2016, 02:49:42 PM

The command " walletpassphrase "my pass phrase" 60" isn't working. I still have to enter my password each time I run the start-alias command. If I run start-missing, it locks up on me. Are there any other methods? I have 100 MN's here.

masternode start-alias mn1 YOURWALLETPASSWORD

just keep pressing up and changing the name/number when doing militple nodes

It worked fine for the first 9 masternodes. Now it's freezing at masternode start-alias master10 MYWALLETPASSWORD

borris123

hero member

Activity: 728

Merit: 500

Quote from: Haunebu81 on August 18, 2016, 02:49:42 PM

The command " walletpassphrase "my pass phrase" 60" isn't working. I still have to enter my password each time I run the start-alias command. If I run start-missing, it locks up on me. Are there any other methods? I have 100 MN's here.

masternode start-alias mn1 YOURWALLETPASSWORD

just keep pressing up and changing the name/number when doing militple nodes

Haunebu81

hero member

Activity: 525

Merit: 500

The command " walletpassphrase "my pass phrase" 60" isn't working. I still have to enter my password each time I run the start-alias command. If I run start-missing, it locks up on me. Are there any other methods? I have 100 MN's here.

B1tUnl0ck3r

sr. member

Activity: 854

Merit: 277

liife threw a tempest at you? be a coconut !

Quote from: borris123 on August 18, 2016, 02:34:01 PM

windows wallet getting annoying. it lags out then crashes. sometimes corrupts database

Hello borris123, you just have to use a wallet.dat pre 2.1.1.0. the last wallet update broke something in the wallet.dat. We all did it and it's working perfectly now.

borris123

hero member

Activity: 728

Merit: 500

windows wallet getting annoying. it lags out then crashes. sometimes corrupts database

4x13

legendary

Activity: 1078

Merit: 1011

Quote from: Equalizer1970 on August 18, 2016, 01:54:29 PM

My wallet is fully synced and working except for POS. Is POS active?? I have my wallet unlocked but it says I'm not staking.

you have to unlock your wallet for staking, have an input which is either 1 hour old (standard input) or a previously staked input of 101 confirms

then your wallet will stake

FogHorn_LegHorn

full member

Activity: 245

Merit: 100

Quote from: Equalizer1970 on August 18, 2016, 01:54:29 PM

My wallet is fully synced and working except for POS. Is POS active?? I have my wallet unlocked but it says I'm not staking.

Yes, POS is working. I let my wallet fully sync then I shut it down for a bit. Opened it back up and unlocked for anon only and it took almost 10-15 minutes before it said staking is active. Mine works great now.

Equalizer1970

hero member

Activity: 623

Merit: 500

Fortune favours the bold!

My wallet is fully synced and working except for POS. Is POS active?? I have my wallet unlocked but it says I'm not staking.

Topic: [ANN][PIVX] - PRIVATE INSTANT VERIFIED TRANSACTION - PROOF OF STAKE - ZEROCOIN - page 354. (Read 782375 times)