Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 148. (Read 487870 times)

As always there will be some delay for the actual mh/s to be updated on dashboard. Give it 15-30 mins and it should match what you are seeing locally.

On another forum I frequent, people were asking about mining pools.  A lot of people said, oh NiceHash, I use them and they are great, its so easy!  Well, I responded that I used a pool that would allow you to auto exchange.  I was called a fool and such, I laughed it off.  Woke up the next day to read about the hack.  Several others posted about it and asked where they could go. 

I told em Miningpoolhub.com and a few said they would check it out.  I even PM'd one of the guys I knew that lost his coin from NiceHash to come over to us.  Don't know if he did.

This pool has done well.  I learned to pull coins after losing my ufocoin when I mined for a bit, then stopped.

2 months ago i was here on MPH crying like a baby cause i lost 20 bucks renting from nicehash, after that i spent countless hours trying to learn and be better and today after all the nicehack you understand better the meaning of life.... if you are here you are in the right place, MiningPoolHub and AhashPool are simply the best in the world for GPU mining.... Zpool and Minergate seems to be scams, winminer is buggy, i usually never write on the internet but i can tell you this... download Megaminer point only to AhashPool and MiningpoolHub and you will be good

for the pool operator... sorry i cry like a baby before, I really admire the Pool you are running... 80 minutes down its nothing compared to whats happening keep this thing thriving, thanks!!....

im drunk but making money while rasking ball

I am mining vertcoin and i have 31 mh/s but on website it shows 15mh/s and highest it shows 26mh/s.
I am not submitting any bad share so why does it not show actual hashrate? Also vertcoin mining takes long time to show any info. Anyone can help?

That would be the fee. 24 hour total on the dashboard is before the fee has been taken out. Confirmed is after the fee has been removed.

Also none of my miners show up on the worker list where with all the other coins they show up once they mined there. It seems I'm only having an issue with Vert and Mona. If I do any other algo my workers show up and the dashboard functions as normal.

Yeah it sat on Vertcoin for about an hour and still didnt show any hash rate. The other coins all seem to register after 5 mins or less.

If you are on the autoswitch port.. it will switch to whichever coin is most profitable... so if it happens to be mining something other than vertcoin, you will not see any hashrate reported if it is on Monacoin for example (which uses the same algo as Vertcoin).  The unconfirmed coins are coins that have been mined by you.. but are waiting for enough confirmations from the network to be released.   

Is it normal to not see any hashrate for VERTcoin? Sorry if this was covered previously. I have ~350mh pointed at the algo switching port -17018 and I am seeing unconfirmed transactions come in. Just wasn't sure if this was "normal".

hello, first time on MPH

I was wondering why I see X amount in last 24 hours on dashboard page.

But i see X-2 in confirmed and pending balances. where did the other earned coin go?.

Hi
This is miningpoolhub operator

1. Sorry for late reply.
I am receiving hundreds of emails, skype chats these days. Also bitcointalk, reddit posts are growing rapidly.
I've replied to all email questions.
Pardon me, I can't answer all questions posted in community too.
I've found that I can't move pool forward if I reply all community posts. There's many requests like coin addition, feature improvements to do.
I hope expert members to help new members each other.

Please contact me via [email protected] email if you need my private advice or immediate service faults like account problem, or pool errors.
I can't handle all general mining questions and settings, pool usage questions.



2. Here's my task list I'm focusing.
- one page miner dashboard will come soon.
- ETN or new profitable coin addition
- improve FAQ page and texts all over the pool to guide new miners. I would like to add small explanation popup text all over the website.




3. Thank you for your trust, and patience during the previous 80 minutes of website crash.
I've been running pool for almost 4 years but such long emergency crash didn't happen.
I had really tough day too.

I understand you worry about your coins regarding the hack.
I recommend you to withdraw coins periodically. I don't mean that pool will be hacked, but pool is not intended for wallet service.
Some coin pools can be closed if mining is meaningless too.
Keep your precious coin in your pocket.

it is the log in the log folder ?

i notice a post somewhere about dev fee on nicehash not working and restart miner

could be that the problem

i edited 1 computer  miners with  -nofee 1   gonna check if it change anything

Enable watchdog if not already.

Please be posting bug reports here with full logs and command line: https://github.com/aaronsace/MultiPoolMiner/issues

for multipoolminer ther eis something really not good

why wtf the miner restart each x minutes with the same miner ??  
it s not even switching just restart the same one over and over again

 
 Status : Running

                  Speed Active                      Launched Command
                  ----- ------                      -------- -------
{42,13 MH/s, 1,26 GH/s} 00 Days 00 Hours 48 Minutes 27 Times Bin\Ethash-Claymore\EthDcrMiner64.exe -r -1 -mport 13333
                                                             -epool europe.ethash-hub.miningpoolhub.com:17020 -ewal
                                                             carlo0000.rx-560x4 -epsw x -esm 3 -allpools 1 -allcoins 1
                                                             -dpool hub.miningpoolhub.com:17022 -dwal carlo0000.rx-560x4
                                                             -dpsw x -dcoin sc -dcri 30 -platform 1


27 time it the same one already  and less than a day


0,00 PH/s 00 Days 00 Hours 58 Minutes 44 Times Bin\Ethash-Claymore\EthDcrMiner64.exe -r -1 -mport 23333 -epool
                                               europe.ethash-hub.miningpoolhub.com:17020 -ewal carlo0000.gtx1060x5 -epsw x
                                               -esm 3 -allpools 1 -allcoins 1 -dpool hub.miningpoolhub.com:17022 -dwal
                                               carlo0000.gtx1060x5 -dpsw x -dcoin sc -dcri 200 -platform 2


really ? 44 times  wtf  so much time lose in restarting the miner

              0,00 PH/s 00 Days 02 Hours 04 Minutes 96 Times Bin\Ethash-Claymore\EthDcrMiner64.exe -r -1 -mport 23333
                                                             -epool europe.ethash-hub.miningpoolhub.com:20535 -ewal
                                                             carlo0000.gtx1070x4 -epsw x -esm 3 -allpools 1 -allcoins 1
                                                             -dpool europe.hub.miningpoolhub.com:20550 -dwal
                                                             carlo0000.gtx1070x4 -dpsw x -dcoin sc -dcri 400 -platform 2

96 time here more i look and worse it gets

Ye, unless you get to 0.0025 BTC.

Thanks again. So to stay off those pools i will just use mph algos. My rig isn't fast enough to get paid very often on those pools for the few times it switches. I'll have small amounts stuck there forever heh

You can check out the websites; they are anonymous pools so you don't need a login and just goes to your BTC address.

This is the full list of algorithms that MiningPoolHub supports: https://miningpoolhub.com/

So, is that a yes? Sorry, its kind of confusing... Will I get payments from zpool and hashrefinery separately? Do i need to sign up there and configure? How does one track those ones?

EDIT: My bat looks like this..

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 1KXVU2RaUsCoHPn4jN2FMFd99cDjCNw3QG -username SuperDerpBro -workername JunkMiner -region US -currency btc,cad -type nvidia -poolname miningpoolhub -algorithm Nist5,scrypt,Keccak,skunk,x11,Lbry,cryptonight,equihash,Lyra2RE2,neoscrypt -donate 10 -watchdog"

EDIT: To make it miningpoolhub only just copy the algos in the Start-MiningPoolHub.bat?

There is a sample bat file included for MiningPoolHub only; notice that specific algorithms have been selected.

They are completely different pools with their own websites. None of the pools supports every algorithm.

Hmm. Looks like it is using zpool and hashrefinery. I didn't put those in my start up bat (I used -poolname miningpoolhub), should i? So is what your saying that when its mining those pool's i didn't select algorithms..  that is not counted and/or added to what i'm credited in BTC? I will just get payments from zpool and hashrefinery separately? How do you track those ones?