Author

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 153. (Read 487870 times)

sr. member
Activity: 476
Merit: 250
18 a week seems really low for 4 1060s Sad

https://i.imgur.com/Ie03txk.png

I assume i just add the same address as in my bat file?

EDIT: anything i can do to tweak this better?

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 1KXVU2RaUsCoHPn4jN2FMFd99cDjCNw3QG -username dhjfrtjtdkyyk -workername JunkMiner -region US -currency btc,usd -type nvidia -poolname miningpoolhub -algorithm cryptonight,equihash,Lyra2RE2,neoscrypt -donate 5 -watchdog"

And .. what is watchdog? Cheesy

It's $18 a day i.e. USD/Day

Yep, that's where your Bitcoin address is.

https://en.wikipedia.org/wiki/Watchdog_timer
full member
Activity: 141
Merit: 100
18 a week seems really low for 4 1060s Sad

https://i.imgur.com/Ie03txk.png

I assume i just add the same address as in my bat file?

EDIT: anything i can do to tweak this better?

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 1KXVU2RaUsCoHPn4jN2FMFd99cDjCNw3QG -username dhjfrtjtdkyyk -workername JunkMiner -region US -currency btc,usd -type nvidia -poolname miningpoolhub -algorithm cryptonight,equihash,Lyra2RE2,neoscrypt -donate 5 -watchdog"

And .. what is watchdog? Cheesy
sr. member
Activity: 476
Merit: 250
Alright, thanks. I was thinking about replacing one of the 1060s with a 1070 (using 4 1060s ATM).. not sure if that is a good idea if they are all going to mine the same thing.

Average profit a day or week?

Where do i set the payouts? I don't see it :/ lol

Also https://i.imgur.com/8N7S9lR.png Musicoin keeps popping in an out of my balances.. kinda odd. heh

Don't worry about mixing, it will work fine.

Average is over a week so it should give an accurate average of your machine without fluctuating too much.

The balance gives you a good snapshot but it's based on cached information so there will be amounts appearing and reappearing sometimes. Each coin is a separate pool and the exchanges are done externally.
full member
Activity: 141
Merit: 100
Alright, thanks. I was thinking about replacing one of the 1060s with a 1070 (using 4 1060s ATM).. not sure if that is a good idea if they are all going to mine the same thing.

Average profit a day or week?

Where do i set the payouts? I don't see it :/ lol

Also https://i.imgur.com/8N7S9lR.png Musicoin keeps popping in an out of my balances.. kinda odd. heh
sr. member
Activity: 476
Merit: 250
I don't think a lot of nice hash miners will be using this. I've been at it for hours now and still haven't even started mining. Finally at benchmarking and its taking for-freaking-ever, locks my PC sometimes (so I start over), and kills the nvidia driver (even at stock clocks)... start over. I have not had this much trouble getting something to run on a PC in my life.

You are earning money even during the benchmark. Regarding locking your PC, is there a specific miner that is causing this as that's obviously not normal behaviour?

There are a lot of miners and algorithms so it can highlight hardware and driver problems that you didn't know you had.

I dont remember, sorry. Couple questions..  

How do i interpret this? Surely i'm not making 18 USD a day lol
https://i.imgur.com/Ok9jWx9.png

Why do i have less coins here than i did before?
https://i.imgur.com/DrO9KfD.png
Checking later
https://i.imgur.com/sdBT9ok.png

When/how often does MPH pay out the bitcoin?

Do i need to mess with the hub workers jobs?

Can diff cards run diff algorithms at the same time?

It will show you the average profit over a week so, when you first start mining, it will take time to settle.

Balances are not real-time so they can disappear and reappear as they move through.

You can set your own pay-out threshold: https://bitcoin.miningpoolhub.com/index.php?page=account&action=pooledit

No hub workers need to be set.

It's currently grouped into AMD and NVidia but per card support is coming (it is possible now but it's not worth the effort as it's too complex in it's current state). You'll find it's accurate enough though as it does know the real hashrates.
full member
Activity: 141
Merit: 100
I don't think a lot of nice hash miners will be using this. I've been at it for hours now and still haven't even started mining. Finally at benchmarking and its taking for-freaking-ever, locks my PC sometimes (so I start over), and kills the nvidia driver (even at stock clocks)... start over. I have not had this much trouble getting something to run on a PC in my life.

You are earning money even during the benchmark. Regarding locking your PC, is there a specific miner that is causing this as that's obviously not normal behaviour?

There are a lot of miners and algorithms so it can highlight hardware and driver problems that you didn't know you had.

I dont remember, sorry. Couple questions..  

How do i interpret this? Surely i'm not making 18 USD a day lol
https://i.imgur.com/Ok9jWx9.png

Why do i have less coins here than i did before?
https://i.imgur.com/DrO9KfD.png
Checking later
https://i.imgur.com/sdBT9ok.png

When/how often does MPH pay out the bitcoin?

Do i need to mess with the hub workers jobs?

Can diff cards run diff algorithms at the same time?
member
Activity: 473
Merit: 18
Can you please add to the API a field that signifies SSL support (and port if different from normal stratum) for algorithms that support it?
member
Activity: 413
Merit: 17
Sorry about being thick, how do so mine LTC to get paid in BTC.

I have my L3+ pointing to hub.miningpoolhub.com:20460

There are no miners for litecoin here and the pool rarely discovers blocks, you shouldn't mine here.
sr. member
Activity: 476
Merit: 250

你好请问莱特L3+怎么设置,设置shun'f
Hello, how will lett L3+ set up, set the order Shi

Point your miner to: hub.miningpoolhub.com:17001

Set your what coin you want to get paid in here: https://miningpoolhub.com/?page=account&action=autoexchange

Zpool has better profits for Scrypt:
URL: scrypt.mine.zpool.ca:3433#xnsub
Worker:
Password: c=BTC,d=128000
sr. member
Activity: 476
Merit: 250
Hi there,

I am testing awesome miner and MultiPoolMiner on MPH.
since MPH use PPLNS system and i am used to PPS system in nicehash, i should not switch too often right?
what is the best/optimal count down timer for switching algos? should i just switch algo once a day? or 30 min? or 1 hour?

thanks in advance.

you setup a batch loop and MPH switches you automatically but you have to be pointed at 12XXX ports.  17XXX for switching within the same algo pool.  You want to switch right after a block is found.  you get paid and you wait for confirm blocks to complete.  Then they are your coins.  Watch for payout mins and transmission fee.   If you send the coins to the exchange for payout it can take 2 to 12 hours normally to return back to your coin of choice.  Some slow trading coins could take several days and you have to watch the exchange, for example maxcoin only pays out best to bitcoin but can takes many days to convert.
Bitcoin is the only coin that is a one way street.  If it goes into bitcoin, it can't get back to the exchange to another coin.  Bitcoin has a high minimum.  see amounts.

Site down is probably overload from all the nicehash people discovering this better site.





MPM is great, i set it up as "-poolname miningpoolhub" as recommended. took hours to bench my rigs. but now all are running well.
currently all miners are using 17xxx ports thou(lyra2re2 and equihash)...

is 12xxx ports used by multi-algo in a program like sgminer/cgminer?
 Smiley Smiley Smiley Smiley Smiley


12xxx ports are based on average speeds for AMD/NVidia cards and not real speeds; you would also need a failover strategy like sgminer/ccminer can do.

In MPM you can also benefit from Zpool, especially for NVidia cards.
newbie
Activity: 3
Merit: 0

你好请问莱特L3+怎么设置,设置shun'f
Hello, how will lett L3+ set up, set the order Shi
newbie
Activity: 16
Merit: 0
Hi there,

I am testing awesome miner and MultiPoolMiner on MPH.
since MPH use PPLNS system and i am used to PPS system in nicehash, i should not switch too often right?
what is the best/optimal count down timer for switching algos? should i just switch algo once a day? or 30 min? or 1 hour?

thanks in advance.

you setup a batch loop and MPH switches you automatically but you have to be pointed at 12XXX ports.  17XXX for switching within the same algo pool.  You want to switch right after a block is found.  you get paid and you wait for confirm blocks to complete.  Then they are your coins.  Watch for payout mins and transmission fee.   If you send the coins to the exchange for payout it can take 2 to 12 hours normally to return back to your coin of choice.  Some slow trading coins could take several days and you have to watch the exchange, for example maxcoin only pays out best to bitcoin but can takes many days to convert.
Bitcoin is the only coin that is a one way street.  If it goes into bitcoin, it can't get back to the exchange to another coin.  Bitcoin has a high minimum.  see amounts.

Site down is probably overload from all the nicehash people discovering this better site.





MPM is great, i set it up as "-poolname miningpoolhub" as recommended. took hours to bench my rigs. but now all are running well.
currently all miners are using 17xxx ports thou(lyra2re2 and equihash)...

is 12xxx ports used by multi-algo in a program like sgminer/cgminer?
 Smiley Smiley Smiley Smiley Smiley
sr. member
Activity: 476
Merit: 250
Ok, I got MultiPoolMiner to work and it's looking good. Not sure tho how accurate earnings info is. It says 7,74620-10,00334USD/day, but after about 12 hours of mining I only got 0.00005754BTC on my MPH account. Does the exchange happen so slow ?

It is all just statistics but your earnings should trickle in. The exchanges are slow and you will get shares even after you have stopped mining because it's PPLNS.

Keep the number of algorithms small for the most accuracy.
newbie
Activity: 35
Merit: 0
Ok, I got MultiPoolMiner to work and it's looking good. Not sure tho how accurate earnings info is. It says 7,74620-10,00334USD/day, but after about 12 hours of mining I only got 0.00005754BTC on my MPH account. Does the exchange happen so slow ?
sr. member
Activity: 476
Merit: 250
I don't think a lot of nice hash miners will be using this. I've been at it for hours now and still haven't even started mining. Finally at benchmarking and its taking for-freaking-ever, locks my PC sometimes (so I start over), and kills the nvidia driver (even at stock clocks)... start over. I have not had this much trouble getting something to run on a PC in my life.

You are earning money even during the benchmark. Regarding locking your PC, is there a specific miner that is causing this as that's obviously not normal behaviour?

There are a lot of miners and algorithms so it can highlight hardware and driver problems that you didn't know you had.
full member
Activity: 304
Merit: 100
i notice in multipoolminer

-poolname miningpoolhub,miningpoolhubcoins

what is miningpoolhubcoins ?

Just the ports, 17xxx vs 20xxx.

miningpoolhub - You choose whether you focus your MPM instance on mining algorithms while miningpoolhub decides which coins are mined as per their profitability (17xxx ports). This can prevent early switching, miningpoolhub will not switch coins of the same algo until a block is found on the currently mined one.
miningpoolhubcoins - You allow MPM to decide what coin is mined and switch to the more profitable coin at the earliest (using 20xxx ports)

Both have benefits and downsides in a way based on luck. You can include both as a good measure.
sr. member
Activity: 476
Merit: 250
Sorry about being thick, how do so mine LTC to get paid in BTC.

I have my L3+ pointing to hub.miningpoolhub.com:20460

Set the auto exchange to Bitcoin: https://miningpoolhub.com/?page=account&action=autoexchange
member
Activity: 176
Merit: 10
Sorry about being thick, how do so mine LTC to get paid in BTC.

I have my L3+ pointing to hub.miningpoolhub.com:20460
newbie
Activity: 21
Merit: 0
So i downloaded both multicoin miner and awesome miner.

multicoin miner was easy to setup, but i want to setup awesome miner.
for now I created a pool for all the crypto i wanted to farm and added it to a poolshare and started mining,. All of them are using port 20xxx.

i tried adding pools with 17xxx for auto algo switching ( got the host adrressbfrom getvstarted pages and replaced 20xxx eith 17xxx) but it refuses to connect.

alsofor coin in pool inslected it as unspecified algo name. what am i doin wrong? I want to set up algo switching for equihash,cryptonight,lyrv2rev2, and groest to macimise profits.
full member
Activity: 141
Merit: 100
I don't think a lot of nice hash miners will be using this. I've been at it for hours now and still haven't even started mining. Finally at benchmarking and its taking for-freaking-ever, locks my PC sometimes (so I start over), and kills the nvidia driver (even at stock clocks)... start over. I have not had this much trouble getting something to run on a PC in my life.
Jump to: