dug up some monero , sent in exchange for Zcatch , coins disappeared ,the balance monero 0 0 zcatch too , where to look for coins?
The same thing happened to me. I waited for a few hours and it magically appeared
Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 191. (Read 487800 times)
September 18, 2017, 07:02:19 AM
The same thing happened to me. I waited for a few hours and it magically appeared
September 18, 2017, 06:58:37 AM
Now you can set starting difficulty value by typing like "d=0.01" at worker's password.
This would help big hash miners to catch up to its own hardware limit faster than ever.
1. Run your miner program and check your difficulty value.
Keep in mind that difficulty value must be stabilized.
We recommend you to get difficulty value at least after 10 minutes of mining.
2. Set this difficulty value to worker's password as "d=XXXX"
ex) d=0.0312
Do not write this value to miningpoolhub's worker page, just write it at miner configuration file.
3. Now run your miner program again.
You will see your miner running at the difficulty value you typed.
4. Difficulty value can go up and down again. It's not a bug.
d=XXX just gives us hint at start and it doesn't enforce diff value to be fixed.
Far wrong diff value may corrected automatically, but you'd better write optimized value.
Big hash miners who are using rentals, multi-algo, ASIC would get better result with difficulty hint.
This would help big hash miners to catch up to its own hardware limit faster than ever.
1. Run your miner program and check your difficulty value.
Keep in mind that difficulty value must be stabilized.
We recommend you to get difficulty value at least after 10 minutes of mining.
2. Set this difficulty value to worker's password as "d=XXXX"
ex) d=0.0312
Do not write this value to miningpoolhub's worker page, just write it at miner configuration file.
3. Now run your miner program again.
You will see your miner running at the difficulty value you typed.
4. Difficulty value can go up and down again. It's not a bug.
d=XXX just gives us hint at start and it doesn't enforce diff value to be fixed.
Far wrong diff value may corrected automatically, but you'd better write optimized value.
Big hash miners who are using rentals, multi-algo, ASIC would get better result with difficulty hint.
Hi, when I try set the difficulty on any hashimoto based coin it changes nothing. I am using ethminer and have tried doing it with sp 0 1 and 2 and none of them work with setting a difficulty. This means that my small rigs never find a share.....and it doesn't seem to ever reduce the difficulty (it remains the same on all rigs). Does anyone know how to get this working?
I am not 100% sure but I don't think that is working on the ethash ports.
Ah thanks, hoping this isn't true but I think you are right.
September 18, 2017, 06:49:24 AM
dug up some monero , sent in exchange for Zcatch , coins disappeared ,the balance monero 0 0 zcatch too , where to look for coins?
September 18, 2017, 06:37:34 AM
Hi, How can I disable OPT password?
On the same page you enabled it using your authenticator app.
https://miningpoolhub.com/?page=account&action=edit
I recommend everyone using an iOS device to try the Authy app, it is free and supports Google's authentication protocol and works much better with a cleaner interface.
OTP = Out of Toilet Paper
Yeah I switched to Authy a little while ago mainly for the ability to back up the authenticator. Really nice little app!
September 18, 2017, 05:03:04 AM
Hi, How can I disable OPT password?
On the same page you enabled it using your authenticator app.
https://miningpoolhub.com/?page=account&action=edit
I recommend everyone using an iOS device to try the Authy app, it is free and supports Google's authentication protocol and works much better with a cleaner interface.
OTP = Out of Toilet Paper
September 18, 2017, 03:37:23 AM
Hi, How can I disable OPT password?
September 17, 2017, 08:12:24 PM
How do i check my miner? Did I configure this incorrect?
I am mining:
https://image.ibb.co/iEXj65/minign12.jpg
but when I check my Status I get:
https://image.ibb.co/fu93zQ/mining21.jpg
Did I do something wrong?? It's been over 30 minutes and nothing has updated.
I am paid over $30 to nice hash and I haven't seen any changes on the Pool.
Please help?
I am mining:
https://image.ibb.co/iEXj65/minign12.jpg
but when I check my Status I get:
https://image.ibb.co/fu93zQ/mining21.jpg
Did I do something wrong?? It's been over 30 minutes and nothing has updated.
I am paid over $30 to nice hash and I haven't seen any changes on the Pool.
Please help?
Why are you spending money on NiceHash if you don't know how the pool works first?
It's switching between Zcash and Zclassic.
You could add worker "a" and "password" as password without quotation marks to speed up things.
September 17, 2017, 08:07:55 PM
Hi, Can I transfer ETH to changely.com ? I mean its about 50minutes get you to transfer
Why would you want to transfer to a domain that does not exist / is not in use?
You can withdraw ETH using an ETH address entered on the wallet page. https://ethereum.miningpoolhub.com/index.php?page=account&action=pooledit
It is not recommended to set your payout address to an exchange address.
becaus I didnt saw the Tax(A 0.001 ETH TX fee will apply)
And never come back to eth mining to this pool Fee has been higher for a while due to the network being overloaded. I suspect you will find similar tx fees when mining on other pools or tx will be very slow. Happy mining!
September 17, 2017, 06:19:53 PM
How do i check my miner? Did I configure this incorrect?
I am mining:
https://image.ibb.co/iEXj65/minign12.jpg
but when I check my Status I get:
https://image.ibb.co/fu93zQ/mining21.jpg
Did I do something wrong?? It's been over 30 minutes and nothing has updated.
I am paid over $30 to nice hash and I haven't seen any changes on the Pool.
Please help?
I am mining:
https://image.ibb.co/iEXj65/minign12.jpg
but when I check my Status I get:
https://image.ibb.co/fu93zQ/mining21.jpg
Did I do something wrong?? It's been over 30 minutes and nothing has updated.
I am paid over $30 to nice hash and I haven't seen any changes on the Pool.
Please help?
Why are you spending money on NiceHash if you don't know how the pool works first?
It's switching between Zcash and Zclassic.
September 17, 2017, 06:13:17 PM
How do i check my miner? Did I configure this incorrect?
I am mining:
https://image.ibb.co/iEXj65/minign12.jpg
but when I check my Status I get:
https://image.ibb.co/fu93zQ/mining21.jpg
Did I do something wrong?? It's been over 30 minutes and nothing has updated.
I am paid over $30 to nice hash and I haven't seen any changes on the Pool.
Please help?
I am mining:
https://image.ibb.co/iEXj65/minign12.jpg
but when I check my Status I get:
https://image.ibb.co/fu93zQ/mining21.jpg
Did I do something wrong?? It's been over 30 minutes and nothing has updated.
I am paid over $30 to nice hash and I haven't seen any changes on the Pool.
Please help?
September 17, 2017, 04:48:51 PM
Hello,
I have been trying to mine from a day now and I mine using the Auto Switching X11 but for some reason my mining account is only stuck to DASH mining.
Can someone please help me why??
This is my configuration:
https://image.ibb.co/ckOtYk/mining5.jpg
and this is what my account shows:
https://image.ibb.co/bVxRm5/mining6.jpg
and
https://image.ibb.co/gtKp65/mining7.jpg
I have been trying to mine from a day now and I mine using the Auto Switching X11 but for some reason my mining account is only stuck to DASH mining.
Can someone please help me why??
This is my configuration:
https://image.ibb.co/ckOtYk/mining5.jpg
and this is what my account shows:
https://image.ibb.co/bVxRm5/mining6.jpg
and
https://image.ibb.co/gtKp65/mining7.jpg
It's port 17007.
The ports are on the homepage: https://miningpoolhub.com/
September 17, 2017, 04:15:38 PM
Hello,
I have been trying to mine from a day now and I mine using the Auto Switching X11 but for some reason my mining account is only stuck to DASH mining.
Can someone please help me why??
This is my configuration:
https://image.ibb.co/ckOtYk/mining5.jpg
and this is what my account shows:
https://image.ibb.co/bVxRm5/mining6.jpg
and
https://image.ibb.co/gtKp65/mining7.jpg
I have been trying to mine from a day now and I mine using the Auto Switching X11 but for some reason my mining account is only stuck to DASH mining.
Can someone please help me why??
This is my configuration:
https://image.ibb.co/ckOtYk/mining5.jpg
and this is what my account shows:
https://image.ibb.co/bVxRm5/mining6.jpg
and
https://image.ibb.co/gtKp65/mining7.jpg
September 17, 2017, 02:31:36 PM
Add sumokoin on miningpoolhub please 
I would like this too, but it will not happen until Sumokoin is listed on either Bittrex, Poloniex or Yobit - head over to the Sumokoin thread and try get them to list it on one of these exchanges. September 17, 2017, 11:27:19 AM
Add sumokoin on miningpoolhub please
September 17, 2017, 07:36:41 AM
Hi, Can I transfer ETH to changely.com ? I mean its about 50minutes get you to transfer
Why would you want to transfer to a domain that does not exist / is not in use?
You can withdraw ETH using an ETH address entered on the wallet page. https://ethereum.miningpoolhub.com/index.php?page=account&action=pooledit
It is not recommended to set your payout address to an exchange address.
becaus I didnt saw the Tax(A 0.001 ETH TX fee will apply)
And never come back to eth mining to this pool September 17, 2017, 06:59:26 AM
Hi, Can I transfer ETH to changely.com ? I mean its about 50minutes get you to transfer
Why would you want to transfer to a domain that does not exist / is not in use?
You can withdraw ETH using an ETH address entered on the wallet page. https://ethereum.miningpoolhub.com/index.php?page=account&action=pooledit
It is not recommended to set your payout address to an exchange address.
Hi,
A couple of questions please :
1. According to my total hashrate from all miners I should be getting around 0.5 Zcoin according to different calculators but the pool is giving me around 0.3 Zcoins/24 hours only .
2. I have unconfirmed balance of 0.32 that has been there for the past 48 hours .
Any explanation would be great, thanks everyone .
Id = 140095
A couple of questions please :
1. According to my total hashrate from all miners I should be getting around 0.5 Zcoin according to different calculators but the pool is giving me around 0.3 Zcoins/24 hours only .
2. I have unconfirmed balance of 0.32 that has been there for the past 48 hours .
Any explanation would be great, thanks everyone .
Id = 140095
It depends on the luck of the pool. Some days you can get more, some days you can get less. MiningPoolHub does roughly 6-7% percent of the total hashrate which is low enough to get inconsistent daily payouts.
Mr MPH should be able to answer/resolve your second query. Everything has been fine on my end.
September 17, 2017, 06:55:01 AM
Now you can set starting difficulty value by typing like "d=0.01" at worker's password.
This would help big hash miners to catch up to its own hardware limit faster than ever.
1. Run your miner program and check your difficulty value.
Keep in mind that difficulty value must be stabilized.
We recommend you to get difficulty value at least after 10 minutes of mining.
2. Set this difficulty value to worker's password as "d=XXXX"
ex) d=0.0312
Do not write this value to miningpoolhub's worker page, just write it at miner configuration file.
3. Now run your miner program again.
You will see your miner running at the difficulty value you typed.
4. Difficulty value can go up and down again. It's not a bug.
d=XXX just gives us hint at start and it doesn't enforce diff value to be fixed.
Far wrong diff value may corrected automatically, but you'd better write optimized value.
Big hash miners who are using rentals, multi-algo, ASIC would get better result with difficulty hint.
This would help big hash miners to catch up to its own hardware limit faster than ever.
1. Run your miner program and check your difficulty value.
Keep in mind that difficulty value must be stabilized.
We recommend you to get difficulty value at least after 10 minutes of mining.
2. Set this difficulty value to worker's password as "d=XXXX"
ex) d=0.0312
Do not write this value to miningpoolhub's worker page, just write it at miner configuration file.
3. Now run your miner program again.
You will see your miner running at the difficulty value you typed.
4. Difficulty value can go up and down again. It's not a bug.
d=XXX just gives us hint at start and it doesn't enforce diff value to be fixed.
Far wrong diff value may corrected automatically, but you'd better write optimized value.
Big hash miners who are using rentals, multi-algo, ASIC would get better result with difficulty hint.
Hi, when I try set the difficulty on any hashimoto based coin it changes nothing. I am using ethminer and have tried doing it with sp 0 1 and 2 and none of them work with setting a difficulty. This means that my small rigs never find a share.....and it doesn't seem to ever reduce the difficulty (it remains the same on all rigs). Does anyone know how to get this working?
I am not 100% sure but I don't think that is working on the ethash ports.
September 17, 2017, 04:51:03 AM
Now you can set starting difficulty value by typing like "d=0.01" at worker's password.
This would help big hash miners to catch up to its own hardware limit faster than ever.
1. Run your miner program and check your difficulty value.
Keep in mind that difficulty value must be stabilized.
We recommend you to get difficulty value at least after 10 minutes of mining.
2. Set this difficulty value to worker's password as "d=XXXX"
ex) d=0.0312
Do not write this value to miningpoolhub's worker page, just write it at miner configuration file.
3. Now run your miner program again.
You will see your miner running at the difficulty value you typed.
4. Difficulty value can go up and down again. It's not a bug.
d=XXX just gives us hint at start and it doesn't enforce diff value to be fixed.
Far wrong diff value may corrected automatically, but you'd better write optimized value.
Big hash miners who are using rentals, multi-algo, ASIC would get better result with difficulty hint.
This would help big hash miners to catch up to its own hardware limit faster than ever.
1. Run your miner program and check your difficulty value.
Keep in mind that difficulty value must be stabilized.
We recommend you to get difficulty value at least after 10 minutes of mining.
2. Set this difficulty value to worker's password as "d=XXXX"
ex) d=0.0312
Do not write this value to miningpoolhub's worker page, just write it at miner configuration file.
3. Now run your miner program again.
You will see your miner running at the difficulty value you typed.
4. Difficulty value can go up and down again. It's not a bug.
d=XXX just gives us hint at start and it doesn't enforce diff value to be fixed.
Far wrong diff value may corrected automatically, but you'd better write optimized value.
Big hash miners who are using rentals, multi-algo, ASIC would get better result with difficulty hint.
Hi, when I try set the difficulty on any hashimoto based coin it changes nothing. I am using ethminer and have tried doing it with sp 0 1 and 2 and none of them work with setting a difficulty. This means that my small rigs never find a share.....and it doesn't seem to ever reduce the difficulty (it remains the same on all rigs). Does anyone know how to get this working?
September 17, 2017, 04:42:29 AM
Hi, Can I transfer ETH to changely.com ? I mean its about 50minutes get you to transfer
September 16, 2017, 12:39:03 PM
Hi,
A couple of questions please :
1. According to my total hashrate from all miners I should be getting around 0.5 Zcoin according to different calculators but the pool is giving me around 0.3 Zcoins/24 hours only .
2. I have unconfirmed balance of 0.32 that has been there for the past 48 hours .
Any explanation would be great, thanks everyone .
Id = 140095
A couple of questions please :
1. According to my total hashrate from all miners I should be getting around 0.5 Zcoin according to different calculators but the pool is giving me around 0.3 Zcoins/24 hours only .
2. I have unconfirmed balance of 0.32 that has been there for the past 48 hours .
Any explanation would be great, thanks everyone .
Id = 140095
Jump to: