Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 61. (Read 487870 times)

Both coins are only traded by MPH at Yobit. Most likely an exchange problem, plus both coins are lower volume than most coins on MPH. I know when I mined MAX it always took longer to exchange than other coins.

I've had maxcoin and adzcoin in the auto-exchange for over a week. I think both are dead... the auto switching mined them, at least it a small amount.

And I have had some Maxcoin (accidentally mined, my fault) in the Auto Exchange Wallet for a day or so.
Not sure if that is normal but all the other coins I have on Auto Exchange usually move to On Exchange pretty quickly.

Musicoin cashout not transferred, any ideas?

https://orbiter.musicoin.org/tx/0xe8d61f1f1e625e0035b998487890df6d8c39deb02b68b326049fca5c708bd05a

the cgminer-monitor is running but there are no settings in the admin for it. There are next to no settings for this like most antminers. basically you can put in 3 pools and change the freq of the chips and thats it. no real admin to these without ssh into it and searching for a way to change some of the settings. They work well connected to siamining.com but thats about it. MPH doesn't work and neither does NH. Its very limited on where you can mine with these. And the Blake2b only has one coin so its also limiting there. a lot of faith in Siacoin

pool runners are so slack, months now and still no Verge Groestl , anyone know of a multipool that supports these with the x10 ? so I can move ?

in the UI of the A3 is there a scheduled task tab? does it run a script called cgminer-monitor? if so put a # in front of the line and hit save and see if it works.

Hello, why does not the transaction take place and what should I do? Transaction f03f4d6fe294248f1ef09d241dc48de3d917efafa448b9b85652d024239b3f23

it depends on how PPLNS is being implemented, N = ?

ideal setup for multipool is N=0.5 and multiport 17xxx switch right after dificulty drops(with price into calculations) on another coin, certainly not waiting for round to end as it is at the moment, as for PPLNS rounds(round ends with finding a block) are irrelevant.

p.s. in a running pool N can be reduced with no risk for pool op, increasing N will lead to pool op owing money to miners as it will stretch rounds backwards and include already paid shares.

no luck... when setting the password to "d=127" or "d=511" it shows the connected diff of 1... the two pools I do connect to well use those diff values. The miner just keeps resetting when connecting to stratum+tcp://hub.miningpoolhub.com:20550 (shows alive) and also stratum+tcp://hub.miningpoolhub.com:12019 (shows dead)

I've tried password of "d=511" and "x d=511" same result on both. Has anyone got a A3 to connect to MPH?

https://miningpoolhub.com/?page=gettingstarted

Is MPH ever going to work with the antminer A3? it would much easier to use MPH instead of having to exchange the SC myself. Every time my A3 connects to MPH it works for about 20-30 seconds and then resets. could be the diff is not high enough. how can we set the diff or can you change it?

Your question has already been answered, it's in my reply to the same question that "sawnoff" asked, you do not need to request a support ticket the coin PaymentID is on the exchange website.

Here is the answer again:


Here is a screenshot showing where the paymentID is located.


https://screenshots.firefox.com/kpwIxCC4ngZ3NtqH/www.cryptopia.co.nz

3.02 withdrew from the pool 0.07507316 LTC ... the transaction is still hanging unconfirmed
you can do something about this?

https://chainz.cryptoid.info/ltc/tx.dws?fce8886e3a146f89af324d20cc8069950ce4f910802e72afb14275812709a3f2

Yeah, lyra2rev2 verge would be awesome!

dutch,

The problem here is, you appear to be criticizing MPH's "website" quite harshly.  I.e.  ...  

I think the website and FAQ is not very comprehensive, as i may say so....  (contrite eh?)

For now, the website is so incredible horrific to me that i cant even find where i have put my wallet adress...

Am i the only one that thinks this site is unclear and horrific chaotic??  ....


I'll give you the benefit of the doubt and go with my gut instinct that your primary language isn't English, as your grammatical structure and quite horrific chaotic; and that you're very new to how pools/transacting between the mining phase>pool wallet>exchange wallet works.


What Sean is trying to say, is that you're here criticizing MPH's website, using an advanced ~$3.5k ASIC machine, asking about stratum port 12xxx and complaining that you lost your wallet address? ... WTF?


You're criticizing a popular and well supported pool, using your big league ~$3.5k hardware, and asking major league questions; yet it's painfully obvious that you're playing at a little league level.

Someone with the big league hardware you're using wouldn't be asking these kind of questions, nor would someone with that hardware need a nice looking website to set it up the worker and ASIC operation well.

Next time try forming questions along with expressing your misunderstanding, maybe keeping the criticisms to yourself...  Or try reading more, maybe different pools, to where you can navigate one line MPH without being so lost.

BTW
I started mining with NH literally 14 days ago with a single GPU in my gaming rig, then tried MPH, gained understanding there and via other pools and exchanges; THEN built a separate 6x1080Ti GPU rig, now customizing MPM command lines and using hub workers to multi algo mine and pay out to multiple wallets and coins.  Crawl-->walk, then you get to criticize.

In regards to your question; I honestly cannot even understand exactly what you are asking.  Do you simply want to see the "status" of your algo switching worker?  Do you not see funds being transferred to your external litecoin wallet?  Have you clicked on the Litecoin link on MPH's website (https://litecoin.miningpoolhub.com/), then tried clicking Dashboard/Wallet/Workers and see if anything is there?

Thanks for the "help" sean 404 LOL.

What is advanced at starting at a multipool? Many sites do this, but at MPH it is darn complicated.

you mention the stratum, but dont explain, so please do, because i dont understand it.

thought this was a forum to help eachother.

Hello,
Im new to Miningpoolhub.
I think the website and FAQ is not very comprehensive, as i may say so....
gamecedits and se*coin)
I have a Bitmain L3+, and i want to have it setup for multi coin mining, and ayout into one specific coin, in this case litecoin.
Now, as far as i understand, i need to use port 17001, but i cant seem to find the correct stratum, so i copied a 12xxx stratum, and changed into 17001. hope this is correct.
i added a worker and password, and filled it into my antminer L3+. Info on the miner states that it is mining, and it is getting work.

On the MPM website however, i cannot find any statistics of my miner...
i set auto exchange to litecoin.
Hub worker default job litecoin. (for scrypt i can only choose litecon, verge, gamecredits, and se*coin)


I set default payment to my litecoin wallet, and thats it.

For now, the website is so incredible horrific to me that i cant even find where i have put my wallet adress...

Am i the only one that thinks this site is unclear and horrific chaotic??

Anyone able to help me a bit?

I also bought awesome miner (which is the reason i came here to mph in the first place.. ) but i havn't done anything with it yet. First want this to be running...

Thanks!

Hi everyone!
I have added pool MiningPoolHub to my Android application for monitoring - `Top Miner Statistics`.
Please send your feedback and help to make the monitoring better.

https://play.google.com/store/apps/details?id=app.minerstat.top